- 24 6月, 2011 3 次提交
-
-
由 Takashi Iwai 提交于
Some BIOS set up the pin config wrongly as line-out although it's supposed to be a speaker out. In most cases, though, we can judge the validity by checking the connection type -- when it's FIXED, mostly it's an invalid line-out but a speaker. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
Even if the machine has no line-out but only HP-out, try to detect the multi-io. It'll allow more possibilities for 5.1 outputs on laptops. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 6月, 2011 1 次提交
-
-
由 David Henningsson 提交于
BIOS lists the internal speaker as an internal line-out. Change to internal speaker + model=auto for better auto-mute capabilities. BugLink: http://bugs.launchpad.net/bugs/754964Reported-by: NMarc Legris <marc.legris@canonical.com> Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 21 6月, 2011 6 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Ian Minett 提交于
Create patch_ca0132.c, to add support for devices featuring the Creative CA0132 HD-audio codec. This driver implements :- * 1 playback subdevice to headphone and speaker * 2 capture subdevices: i - Mic-in ii- Line-in * mixer device Advanced DSP features are not yet included. Developed and maintained by Creative Labs, Inc. Signed-off-by: NIan Minett <ian_minett@creativelabs.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Create a master volume and mute control of playback for VT1718S. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
When switch HP independent mode, mute/unmute connctions of mixer which is connected to headphone for VT1718S. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Remove some invalid initial verbs and correct some wrong initial verbs for VT1718S codec. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Tony Vroon 提交于
The "diverse" Quanta ID 0x0763 is overridden to ALC268_ACER. This keeps headphone automute and microphone input from operating on at least one laptop from Opti Systems. Without the override, the BIOS parser does a fine job setting the card up and everything works. Tested-By: NPeter Schneider <e.at.chi.kaen@googlemail.com> Signed-off-by: NTony Vroon <tony@linx.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 20 6月, 2011 2 次提交
-
-
由 David Henningsson 提交于
The reporter, who is running kernel 2.6.38, reports that he needs to set model=auto for the headphone output to work correctly. BugLink: http://bugs.launchpad.net/bugs/761022 Cc: stable@kernel.org (v2.6.38+) Reported-by: Jo Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Just a minor clean up; nid-mapping can be set directly to the smart51 mixer element. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 18 6月, 2011 1 次提交
-
-
由 David Henningsson 提交于
Now that we have changed the position_fix default for ATI and AMD to be LPIB (see commit 50e3bbf9), we can remove the quirks that were added for ATI chipsets. Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 17 6月, 2011 3 次提交
-
-
由 Takashi Iwai 提交于
The via driver spews warnigs like hda-codec: no NID for mapping control Independent HP:0:0 with some codecs because snd_hda_add_nid() is called with nid=0. This patch fixes it by skipping the call when no corresponding widget is found. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Since commit 13882a82 (optimize iso queueing by setting wake only after the last packet), drivers are required to call fw_iso_context_queue_flush() after queueing a batch of packets. The missing call would have an effect only if the controller queue underruns, but then the DMA would stop completely. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Torsten Schenk 提交于
Fixed remaining issues of the signedness bug discovered by Dan Carpenter. A check was remaining that tests if unsigned rt->rate is >= 0. Changed that so that rt->rate now consistently uses ARRAY_SIZE(rates) as invalid rate value and not -1. Signed-off-by: NTorsten Schenk <torsten.schenk@zoho.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 15 6月, 2011 1 次提交
-
-
由 Takashi Iwai 提交于
Add missing __devinit. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 6月, 2011 2 次提交
-
-
由 Takashi Iwai 提交于
The commit 2308f4ad missed static inline thus it resulted in multiple-definitions error at linking. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jesper Juhl 提交于
We have a double-free bug in sound/usb/6fire/firmware.c::usb6fire_fw_ezusb_upload(). We already call release_firmware(fw) on line 258, so when we then do it again after usb6fire_fw_ezusb_write() returns <0, we have a double-free. Easily fixed by just removing the last call to release_firmware(). Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 6月, 2011 8 次提交
-
-
由 Greg Thelen 提交于
If given a -1 cmd parameter then make_exec_verb() returns -1 without setting the res output value. Prior to this change snd_hda_codec_read() assumed that make_exec_verb() unconditionally set res regardless of the cmd value. This change explicitly checks the make_exec_verb() return value before consuming the potentially unset res value. Signed-off-by: NGreg Thelen <gthelen@google.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 Joe Perches 提交于
Using static inline functions can reduce compilation messages and macro misuse. sound/pci/hda/patch_conexant.c: In function ‘patch_cxt5045’: sound/pci/hda/patch_conexant.c:1232:3: warning: statement with no effect Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The auto-mute setup for Acer Aspire-one with ALC268 was set wrongly during the clean-up of auto-mute function. Fixed now. Tested-by: NBorislav Petkov <bp@alien8.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Florian Zeitz 提交于
This patch adds the necessary details to support the PCIe version of E-MU's 0404 card. From comparing the PCBs it seems the PCIe version just added a PCIe chipset and left all other components pretty much in place. For anyone intrigued to take a look at the PCB there are pictures I took at <http://babelmonkeys.de/~florob/E-MU%200404/>. Signed-off-by: NFlorian Zeitz <florob@babelmonkeys.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
The PCI version of the RME HDSP MADI card uses 0xcf as revision ID. Just add this to the list of supported cards. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
When using Word Clock on RME MADI cards, AutoSync mode was alternating betweeen MADI and WC due to a typo: AutoSync is indicated in the second status register (status2), not the first one (status). While the proc output was always correct, the reported WC frequency to ALSA was unstable as mentioned in http://mailman.alsa-project.org/pipermail/alsa-devel/2008-March/006723.htmlSigned-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
For the MIDI part, we need to acquire (and release) the hmidi->lock, access to the global hdspm structure is serialized through hmidi->hdspm->lock instead. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 6月, 2011 8 次提交
-
-
由 Takashi Iwai 提交于
-
由 Daniel T Chen 提交于
BugLink: https://launchpad.net/bugs/761171 The original reporter needs the model=auto quirk for his internal speakers to be audible in the latest daily snapshot, so add an entry in the quirk table for his PCI SSID. A trivially different version of this patch using the model=asus quirk should be applied to the 2.6.38 and 2.6.39 stable kernels. We don't use the asus quirk in 3.0-rc2, because 3.0-rc2's autoparser is much improved. Reported-and-tested-by: tomdeering7 Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Clean up snd_printk() helper using the %pV prefix for recursive printks. This also automagically fixes an Oops with RO/NX-enabled modules. Tested-by: NMaarten Lankhorst <m.b.lankhorst@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Some Reatlek model quirks use master_mute bool switch for controlling the master-mute of outputs. For these cases, the initialization of HP pins/amps were forgotten during the transition to the common automute helper function in 3.0 development time, and resulted in the muted HP output as default. This patch fixes the issue by adjusting the HP output explicitly with master_mute switch. Tested-by: NMichal Hocko <mhocko@suse.cz> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The tag number was forgotten to be fixed after cleaning up the model quirks for ALC262 fujitsu and lenovo-3000 models. Tested-by: NMichal Hocko <mhocko@suse.cz> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
SSYNC register was once defined as 0x34-37 in the old Intel datasheet, but corrected later to 0x38-3b. For fixing the register usage, a new bit-flag is introduced for indicating the old ICH SSYNC register, and ICH* PCI entries are added explicitly to enable this quirk. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Some HP laptops with AD1981 have SPDIF connections, but currently the driver disables it statically. Better to check the pin default config to judge whether to enable or disable the SPDIF. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Sangbeom Kim 提交于
If DMA active status should be checked, I2SCON register should be referenced. In this patch, Fix the incorrect referencing of I2SCON register. Reported-by : Lakkyung Jung <lakkyung.jung@samsung.com> Signed-off-by: NSangbeom Kim <sbkim73@samsung.com> Acked-by: NJassi Brar <jassisinghbrar@gmail.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
- 09 6月, 2011 3 次提交
-
-
由 Lars-Peter Clausen 提交于
Currently it is possible that snd_soc_new_{mixer,mux,pga} is called with a DAPM context not matching the widgets context. This can lead to a wrong prefix_len calculation, which will result in undefined behaviour. To avoid this always use the DAPM context from the widget itself. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
由 Timur Tabi 提交于
The DMA (PCM) driver used by some Freescale PowerPC supports separate DAIs for playback and capture, so DMA buffers should be allocated only for the initialized streams. Instead of checking for the number of active channels, which apparently is not reliable, check to see if the actual stream object exists. Also provide a better name for the DMA interrupt. Signed-off-by: NTimur Tabi <timur@freescale.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Reported-by: NKieran O'Leary <Kieran.O'Leary@wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com> Cc: stable@kernel.org
-
- 08 6月, 2011 1 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com> Cc: stable@kernel.org
-
- 07 6月, 2011 1 次提交
-
-
由 Takashi Iwai 提交于
Instead of checking the azx_dev index with a fixed number (4), check the stream direction of the assigned substream. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-