Merge 4fc29c1a included this extra line, but it's not needed (or
useful) since we'll bio_set_op_attrs() right after to properly set
the op and flags for the bio.
Signed-off-by: NJens Axboe <axboe@fb.com>

When a bio is cloned, the newly created bio must be associated with
the same blkcg as the original bio (if BLK_CGROUP is enabled). If
this operation is not performed, then the new bio is not associated
with any group, and the group of the current task is returned when
the group of the bio is requested.

Depending on the cloning frequency, this may cause a large
percentage of the bios belonging to a given group to be treated
as if belonging to other groups (in most cases as if belonging to
the root group). The expected group isolation may thereby be broken.

This commit adds the missing association in bio-cloning functions.

Fixes: da2f0f74 ("Btrfs: add support for blkio controllers")
Cc: stable@vger.kernel.org # v4.3+
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Reviewed-by: NNikolay Borisov <kernel@kyup.com>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

'nr_undestroyed_grps' in struct throtl_data was used to count
the number of throtl_grp related with throtl_data, but now
throtl_grp is tracked by blkcg_gq, so it is useless anymore.
Signed-off-by: NHou Tao <houtao1@huawei.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently we take care to handle I_DIRTY_TIME in vfs_fsync() and
queue_io() so that inodes which have only dirty timestamps are properly
written on fsync(2) and sync(2). However there are other call sites -
most notably going through write_inode_now() - which expect inode to be
clean after WB_SYNC_ALL writeback. This is not currently true as we do
not clear I_DIRTY_TIME in __writeback_single_inode() even for
WB_SYNC_ALL writeback in all the cases. This then resulted in the
following oops because bdev_write_inode() did not clean the inode and
writeback code later stumbled over a dirty inode with detached wb.

  general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN
  Modules linked in:
  CPU: 3 PID: 32 Comm: kworker/u10:1 Not tainted 4.6.0-rc3+ #349
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Workqueue: writeback wb_workfn (flush-11:0)
  task: ffff88006ccf1840 ti: ffff88006cda8000 task.ti: ffff88006cda8000
  RIP: 0010:[<ffffffff818884d2>]  [<ffffffff818884d2>]
  locked_inode_to_wb_and_lock_list+0xa2/0x750
  RSP: 0018:ffff88006cdaf7d0  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88006ccf2050
  RDX: 0000000000000000 RSI: 000000114c8a8484 RDI: 0000000000000286
  RBP: ffff88006cdaf820 R08: ffff88006ccf1840 R09: 0000000000000000
  R10: 000229915090805f R11: 0000000000000001 R12: ffff88006a72f5e0
  R13: dffffc0000000000 R14: ffffed000d4e5eed R15: ffffffff8830cf40
  FS:  0000000000000000(0000) GS:ffff88006d500000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000003301bf8 CR3: 000000006368f000 CR4: 00000000000006e0
  DR0: 0000000000001ec9 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
  Stack:
   ffff88006a72f680 ffff88006a72f768 ffff8800671230d8 03ff88006cdaf948
   ffff88006a72f668 ffff88006a72f5e0 ffff8800671230d8 ffff88006cdaf948
   ffff880065b90cc8 ffff880067123100 ffff88006cdaf970 ffffffff8188e12e
  Call Trace:
   [<     inline     >] inode_to_wb_and_lock_list fs/fs-writeback.c:309
   [<ffffffff8188e12e>] writeback_sb_inodes+0x4de/0x1250 fs/fs-writeback.c:1554
   [<ffffffff8188efa4>] __writeback_inodes_wb+0x104/0x1e0 fs/fs-writeback.c:1600
   [<ffffffff8188f9ae>] wb_writeback+0x7ce/0xc90 fs/fs-writeback.c:1709
   [<     inline     >] wb_do_writeback fs/fs-writeback.c:1844
   [<ffffffff81891079>] wb_workfn+0x2f9/0x1000 fs/fs-writeback.c:1884
   [<ffffffff813bcd1e>] process_one_work+0x78e/0x15c0 kernel/workqueue.c:2094
   [<ffffffff813bdc2b>] worker_thread+0xdb/0xfc0 kernel/workqueue.c:2228
   [<ffffffff813cdeef>] kthread+0x23f/0x2d0 drivers/block/aoe/aoecmd.c:1303
   [<ffffffff867bc5d2>] ret_from_fork+0x22/0x50 arch/x86/entry/entry_64.S:392
  Code: 05 94 4a a8 06 85 c0 0f 85 03 03 00 00 e8 07 15 d0 ff 41 80 3e
  00 0f 85 64 06 00 00 49 8b 9c 24 88 01 00 00 48 89 d8 48 c1 e8 03 <42>
  80 3c 28 00 0f 85 17 06 00 00 48 8b 03 48 83 c0 50 48 39 c3
  RIP  [<     inline     >] wb_get include/linux/backing-dev-defs.h:212
  RIP  [<ffffffff818884d2>] locked_inode_to_wb_and_lock_list+0xa2/0x750
  fs/fs-writeback.c:281
   RSP <ffff88006cdaf7d0>
  ---[ end trace 986a4d314dcb2694 ]---

Fix the problem by making sure __writeback_single_inode() writes inode
only with dirty times in WB_SYNC_ALL mode.
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Tested-by: NLaurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

Commit 09954bad ("floppy: refactor open() flags handling"), as a
side-effect, causes open(/dev/fdX, O_ACCMODE) to fail. It turns out that
this is being used setfdprm userspace for ioctl-only open().

Reintroduce back the original behavior wrt !(FMODE_READ|FMODE_WRITE)
modes, while still keeping the original O_NDELAY bug fixed.

Cc: stable@vger.kernel.org # v4.5+
Reported-by: NWim Osterholt <wim@djo.tudelft.nl>
Tested-by: NWim Osterholt <wim@djo.tudelft.nl>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

Pull media DocBook removal and some fixups from Mauro Carvalho Chehab:

  - removal of the media DocBook (since it's all in Sphinx now)

  - videobuf2: Fix an allocation regression

  - a few fixes related to the CEC drivers

* tag 'media/v4.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] cec: fix off-by-one memset
  [media] staging: add MEDIA_SUPPORT dependency
  [media] vivid: don't handle CEC_MSG_SET_STREAM_PATH
  [media] media: adv7180: Fix broken interrupt register access
  [media] vb2: Fix allocation size of dma_parms
  [media] vim2m: copy the other colorspace-related fields as well
  [media] adv7511: fix VIC autodetect
  doc-rst: Remove the media docbook

Pull module updates from Rusty Russell:
 "The only interesting thing here is Jessica's patch to add
  ro_after_init support to modules.  The rest are all trivia"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  extable.h: add stddef.h so "NULL" definition is not implicit
  modules: add ro_after_init support
  jump_label: disable preemption around __module_text_address().
  exceptions: fork exception table content from module.h into extable.h
  modules: Add kernel parameter to blacklist modules
  module: Do a WARN_ON_ONCE() for assert module mutex not held
  Documentation/module-signing.txt: Note need for version info if reusing a key
  module: Invalidate signatures on force-loaded modules
  module: Issue warnings when tainting kernel
  module: fix redundant test.
  module: fix noreturn attribute for __module_put_and_exit()

Merge even more updates from Andrew Morton:

 - dma-mapping API cleanup

 - a few cleanups and misc things

 - use jump labels in dynamic-debug

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  dynamic_debug: add jump label support
  jump_label: remove bug.h, atomic.h dependencies for HAVE_JUMP_LABEL
  arm: jump label may reference text in __exit
  tile: support static_key usage in non-module __exit sections
  sparc: support static_key usage in non-module __exit sections
  powerpc: add explicit #include <asm/asm-compat.h> for jump label
  drivers/media/dvb-frontends/cxd2841er.c: avoid misleading gcc warning
  MAINTAINERS: update email and list of Samsung HW driver maintainers
  block: remove BLK_DEV_DAX config option
  samples/kretprobe: fix the wrong type
  samples/kretprobe: convert the printk to pr_info/pr_err
  samples/jprobe: convert the printk to pr_info/pr_err
  samples/kprobe: convert the printk to pr_info/pr_err
  dma-mapping: use unsigned long for dma_attrs
  media: mtk-vcodec: remove unused dma_attrs
  include/linux/bitmap.h: cleanup
  tree-wide: replace config_enabled() with IS_ENABLED()
  drivers/fpga/Kconfig: fix build failure

Although dynamic debug is often only used for debug builds, sometimes
its enabled for production builds as well.  Minimize its impact by using
jump labels.  This reduces the text section by 7000+ bytes in the kernel
image below.  It does increase data, but this should only be referenced
when changing the direction of the branches, and hence usually not in
cache.

     text     data     bss       dec     hex  filename
  8194852  4879776  925696  14000324  d5a0c4  vmlinux.pre
  8187337  4960224  925696  14073257  d6bda9  vmlinux.post

Link: http://lkml.kernel.org/r/d165b465e8c89bc582d973758d40be44c33f018b.1467837322.git.jbaron@akamai.comSigned-off-by: NJason Baron <jbaron@akamai.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The current jump_label.h includes bug.h for things such as WARN_ON().
This makes the header problematic for inclusion by kernel.h or any
headers that kernel.h includes, since bug.h includes kernel.h (circular
dependency).  The inclusion of atomic.h is similarly problematic.  Thus,
this should make jump_label.h 'includable' from most places.

Link: http://lkml.kernel.org/r/7060ce35ddd0d20b33bf170685e6b0fab816bdf2.1467837322.git.jbaron@akamai.comSigned-off-by: NJason Baron <jbaron@akamai.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The jump table can reference text found in an __exit section.  Thus,
instead of discarding it at build time, include EXIT_TEXT as part of
__init and it will be released when the system boots.

Link: http://lkml.kernel.org/r/60284113bb759121e8ae3e99af1535647e52123f.1467837322.git.jbaron@akamai.comSigned-off-by: NJason Baron <jbaron@akamai.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Previously, all the __exit sections were just dropped by the link phase.
However, if there are static_key (jump label) constructs in __exit
sections that are not modules, the link fails with the message:

   `.exit.text' referenced in section `__jump_table' of xxx.o:
   defined in discarded section `.exit.text' of xxx.o

Support this usage by keeping the .exit.text sections in the final image
if JUMP_LABEL is defined, then discarding them once initialization is
complete.

Link: http://lkml.kernel.org/r/bfd7c107c610c30e992868ebfe2a5d796a097464.1467837322.git.jbaron@akamai.comSigned-off-by: NJason Baron <jbaron@akamai.com>
Signed-off-by: NChris Metcalf <cmetcalf@mellanox.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The jump table can reference text found in an __exit section.  Thus,
instead of discarding it at build/link time, include EXIT_TEXT as part
of __init and release it at system boot time.

Without this patch the link fails with:

    `.exit.text' referenced in section `__jump_table' of xxx.o:
    defined in discarded section `.exit.text' of xxx.o

Link: http://lkml.kernel.org/r/d822da427ab07a02a394602eca687104ff682f83.1467837322.git.jbaron@akamai.comSigned-off-by: NJason Baron <jbaron@akamai.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The stringify_in_c() macro may not be included. Make the dependency
explicit.

Link: http://lkml.kernel.org/r/564720c5328edd53c9d56db325be7215440eec3e.1467837322.git.jbaron@akamai.comSigned-off-by: NJason Baron <jbaron@akamai.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Joe Perches <joe@perches.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The addition of jump label support in dynamic_debug caused an unexpected
warning in exactly one file in the kernel:

  drivers/media/dvb-frontends/cxd2841er.c: In function 'cxd2841er_tune_tc':
  include/linux/dynamic_debug.h:134:3: error: 'carrier_offset' may be used uninitialized in this function [-Werror=maybe-uninitialized]
     __dynamic_dev_dbg(&descriptor, dev, fmt, \
     ^~~~~~~~~~~~~~~~~
  drivers/media/dvb-frontends/cxd2841er.c:3177:11: note: 'carrier_offset' was declared here
    int ret, carrier_offset;
             ^~~~~~~~~~~~~~

The problem seems to be that the compiler gets confused by the extra
conditionals in static_branch_unlikely, to the point where it can no
longer keep track of which branches have already been taken, and it
doesn't realize that this variable is now always initialized when it
gets used.

I have done lots of randconfig kernel builds and could not find any
other file with this behavior, so I assume it's a rare enough glitch
that we don't need to change the jump label support but instead just
work around the warning in the driver.

To achieve that, I'm moving the check for the return value into the
switch() statement, which is an obvious transformation, but is enough to
un-confuse the compiler here.  The resulting code is not as nice to
read, but at least we retain the behavior of warning if it gets changed
to actually access an uninitialized carrier offset value in the future.

Link: http://lkml.kernel.org/r/20160713204342.1221511-1-arnd@arndb.deSigned-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NAbylay Ospan <aospan@netup.ru>
Cc: Sergey Kozlov <serjk@netup.ru>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Jason Baron <jbaron@akamai.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change my email address in the MAINTAINERS file.
Add new maintainers of selected Samsung HW drivers.

Link: http://lkml.kernel.org/r/1470060703-20423-1-git-send-email-k.debski@samsung.comSigned-off-by: NKamil Debski <k.debski@samsung.com>
Reviewed-by: NJean Delvare <jdelvare@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Kamil Debski <kamil@wypas.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The functionality for block device DAX was already removed with commit
acc93d30 ("Revert "block: enable dax for raw block devices"")

However, we still had a config option hanging around that was always
disabled because it depended on CONFIG_BROKEN.  This config option was
introduced in commit 03cdadb0 ("block: disable block device DAX by
default")

This change reverts that commit, removing the dead config option.

Link: http://lkml.kernel.org/r/20160729182314.6368-1-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: NDan Williams <dan.j.williams@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The regs_return_value() returns "unsigned long" or "long" value.  But the
retval is int type now, it may cause overflow, the log may becomes:

    [ 2911.078869] do_brk returned -2003877888 and took 4620 ns to execute

This patch converts the retval to "unsigned long" type, and fixes the
overflow issue.

Link: http://lkml.kernel.org/r/1464143083-3877-4-git-send-email-shijie.huang@arm.comSigned-off-by: NHuang Shijie <shijie.huang@arm.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We prefer to use the pr_* to print out the log now, this patch converts
the printk to pr_info.  In the error path, use the pr_err to replace the
printk.

Link: http://lkml.kernel.org/r/1464143083-3877-3-git-send-email-shijie.huang@arm.comSigned-off-by: NHuang Shijie <shijie.huang@arm.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We prefer to use the pr_* to print out the log now, this patch converts
the printk to pr_info.  In the error path, use the pr_err to replace the
printk.

Link: http://lkml.kernel.org/r/1464143083-3877-2-git-send-email-shijie.huang@arm.comSigned-off-by: NHuang Shijie <shijie.huang@arm.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We prefer to use the pr_* to print out the log now, this patch converts
the printk to pr_info.  In the error path, use the pr_err to replace the
printk.

Link: http://lkml.kernel.org/r/1464143083-3877-1-git-send-email-shijie.huang@arm.comSigned-off-by: NHuang Shijie <shijie.huang@arm.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The dma-mapping core and the implementations do not change the DMA
attributes passed by pointer.  Thus the pointer can point to const data.
However the attributes do not have to be a bitfield.  Instead unsigned
long will do fine:

1. This is just simpler.  Both in terms of reading the code and setting
   attributes.  Instead of initializing local attributes on the stack
   and passing pointer to it to dma_set_attr(), just set the bits.

2. It brings safeness and checking for const correctness because the
   attributes are passed by value.

Semantic patches for this change (at least most of them):

    virtual patch
    virtual context

    @r@
    identifier f, attrs;

    @@
    f(...,
    - struct dma_attrs *attrs
    + unsigned long attrs
    , ...)
    {
    ...
    }

    @@
    identifier r.f;
    @@
    f(...,
    - NULL
    + 0
     )

and

    // Options: --all-includes
    virtual patch
    virtual context

    @r@
    identifier f, attrs;
    type t;

    @@
    t f(..., struct dma_attrs *attrs);

    @@
    identifier r.f;
    @@
    f(...,
    - NULL
    + 0
     )

Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.comSigned-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NVineet Gupta <vgupta@synopsys.com>
Acked-by: NRobin Murphy <robin.murphy@arm.com>
Acked-by: NHans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Acked-by: Mark Salter <msalter@redhat.com> [c6x]
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris]
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm]
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp]
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core]
Acked-by: David Vrabel <david.vrabel@citrix.com> [xen]
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb]
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Acked-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32]
Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc]
Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The local variable dma_attrs is set but never read.

Link: http://lkml.kernel.org/r/1468399300-5399-1-git-send-email-k.kozlowski@samsung.comSigned-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove two unneeded `else's.

Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The use of config_enabled() against config options is ambiguous.  In
practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the
author might have used it for the meaning of IS_ENABLED().  Using
IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc.  makes the intention
clearer.

This commit replaces config_enabled() with IS_ENABLED() where possible.
This commit is only touching bool config options.

I noticed two cases where config_enabled() is used against a tristate
option:

 - config_enabled(CONFIG_HWMON)
  [ drivers/net/wireless/ath/ath10k/thermal.c ]

 - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE)
  [ drivers/gpu/drm/gma500/opregion.c ]

I did not touch them because they should be converted to IS_BUILTIN()
in order to keep the logic, but I was not sure it was the authors'
intention.

Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.comSigned-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: Stas Sergeev <stsp@list.ru>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: "Dmitry V. Levin" <ldv@altlinux.org>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Will Drewry <wad@chromium.org>
Cc: Nikolay Martynov <mar.kolya@gmail.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Rafal Milecki <zajec5@gmail.com>
Cc: James Cowgill <James.Cowgill@imgtec.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alex Smith <alex.smith@imgtec.com>
Cc: Adam Buchbinder <adam.buchbinder@gmail.com>
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Tony Wu <tung7970@gmail.com>
Cc: Huaitong Han <huaitong.han@intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Gelmini <andrea.gelmini@gelma.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rabin Vincent <rabin@rab.in>
Cc: "Maciej W. Rozycki" <macro@imgtec.com>
Cc: David Daney <david.daney@cavium.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While building m32r allmodconfig the build is failing with the error:

  ERROR: "bad_dma_ops" [drivers/fpga/zynq-fpga.ko] undefined!

Xilinx Zynq FPGA is using DMA but there was no dependency while
building.

Link: http://lkml.kernel.org/r/1464346526-13913-1-git-send-email-sudipm.mukherjee@gmail.comSigned-off-by: NSudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Acked-by: NMoritz Fischer <moritz.fischer@ettus.com>
Cc: Alan Tull <atull@opensource.altera.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit 16468c78.

Bisection showed that it was the root cause for a resume hang on a
bog-standard all-Intel laptop (Sony Vaio Pro 11), and reverting fixes
the hang.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While not an issue now, eventually we will have independent users of
the extable.h file and we will stop sourcing it via module.h header.

In testing that pending work, with very sparse builds, characteristic
of an "allnoconfig" on various architectures, we can sometimes hit an
instance where the very basic standard definitions aren't present,
resulting in:

 include/linux/extable.h:26:9: error: 'NULL' undeclared (first use in this function)

To be clear, this isn't a regression, since currently extable.h is
only used by module.h -- however, we will need this addition present
before we start migrating exception table users off module.h and onto
extable.h during the next release cycle.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Add ro_after_init support for modules by adding a new page-aligned section
in the module layout (after rodata) for ro_after_init data and enabling RO
protection for that section after module init runs.
Signed-off-by: NJessica Yu <jeyu@redhat.com>
Acked-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Steven reported a warning caused by not holding module_mutex or
rcu_read_lock_sched: his backtrace was corrupted but a quick audit
found this possible cause.  It's wrong anyway...
Reported-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

For historical reasons (i.e. pre-git) the exception table stuff was
buried in the middle of the module.h file.  I noticed this while
doing an audit for needless includes of module.h and found core
kernel files (both arch specific and arch independent) were just
including module.h for this.

The converse is also true, in that conventional drivers, be they
for filesystems or actual hardware peripherals or similar, do not
normally care about the exception tables.

Here we fork the exception table content out of module.h into a
new file called extable.h -- and temporarily include it into the
module.h itself.

Then we will work our way across the arch independent and arch
specific files needing just exception table content, and move
them off module.h and onto extable.h

Once that is done, we can remove the extable.h from module.h
and in doing it like this, we avoid introducing build failures
into the git history.

The gain here is that module.h gets a bit smaller, across all
modular drivers that we build for allmodconfig.  Also the core
files that only need exception table stuff don't have an include
of module.h that brings in lots of extra stuff and just looks
generally out of place.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Blacklisting a module in linux has long been a problem.  The current
procedure is to use rd.blacklist=module_name, however, that doesn't
cover the case after the initramfs and before a boot prompt (where one
is supposed to use /etc/modprobe.d/blacklist.conf to blacklist
runtime loading). Using rd.shell to get an early prompt is hit-or-miss,
and doesn't cover all situations AFAICT.

This patch adds this functionality of permanently blacklisting a module
by its name via the kernel parameter module_blacklist=module_name.

[v2]: Rusty, use core_param() instead of __setup() which simplifies
things.

[v3]: Rusty, undo wreckage from strsep()

[v4]: Rusty, simpler version of blacklisted()
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: linux-doc@vger.kernel.org
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

When running with lockdep enabled, I triggered the WARN_ON() in the
module code that asserts when module_mutex or rcu_read_lock_sched are
not held. The issue I have is that this can also be called from the
dump_stack() code, causing us to enter an infinite loop...

 ------------[ cut here ]------------
 WARNING: CPU: 1 PID: 0 at kernel/module.c:268 module_assert_mutex_or_preempt+0x3c/0x3e
 Modules linked in: ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6
 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.7.0-rc3-test-00013-g501c2375 #14
 Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
  ffff880215e8fa70 ffff880215e8fa70 ffffffff812fc8e3 0000000000000000
  ffffffff81d3e55b ffff880215e8fac0 ffffffff8104fc88 ffffffff8104fcab
  0000000915e88300 0000000000000046 ffffffffa019b29a 0000000000000001
 Call Trace:
  [<ffffffff812fc8e3>] dump_stack+0x67/0x90
  [<ffffffff8104fc88>] __warn+0xcb/0xe9
  [<ffffffff8104fcab>] ? warn_slowpath_null+0x5/0x1f
 ------------[ cut here ]------------
 WARNING: CPU: 1 PID: 0 at kernel/module.c:268 module_assert_mutex_or_preempt+0x3c/0x3e
 Modules linked in: ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6
 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.7.0-rc3-test-00013-g501c2375 #14
 Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
  ffff880215e8f7a0 ffff880215e8f7a0 ffffffff812fc8e3 0000000000000000
  ffffffff81d3e55b ffff880215e8f7f0 ffffffff8104fc88 ffffffff8104fcab
  0000000915e88300 0000000000000046 ffffffffa019b29a 0000000000000001
 Call Trace:
  [<ffffffff812fc8e3>] dump_stack+0x67/0x90
  [<ffffffff8104fc88>] __warn+0xcb/0xe9
  [<ffffffff8104fcab>] ? warn_slowpath_null+0x5/0x1f
 ------------[ cut here ]------------
 WARNING: CPU: 1 PID: 0 at kernel/module.c:268 module_assert_mutex_or_preempt+0x3c/0x3e
 Modules linked in: ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6
 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.7.0-rc3-test-00013-g501c2375 #14
 Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
  ffff880215e8f4d0 ffff880215e8f4d0 ffffffff812fc8e3 0000000000000000
  ffffffff81d3e55b ffff880215e8f520 ffffffff8104fc88 ffffffff8104fcab
  0000000915e88300 0000000000000046 ffffffffa019b29a 0000000000000001
 Call Trace:
  [<ffffffff812fc8e3>] dump_stack+0x67/0x90
  [<ffffffff8104fc88>] __warn+0xcb/0xe9
  [<ffffffff8104fcab>] ? warn_slowpath_null+0x5/0x1f
 ------------[ cut here ]------------
 WARNING: CPU: 1 PID: 0 at kernel/module.c:268 module_assert_mutex_or_preempt+0x3c/0x3e
[...]

Which gives us rather useless information. Worse yet, there's some race
that causes this, and I seldom trigger it, so I have no idea what
happened.

This would not be an issue if that warning was a WARN_ON_ONCE().
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

If CONFIG_TRANSPARENT_HUGE_PAGECACHE=n, HPAGE_PMD_NR evaluates to
BUILD_BUG_ON(), and may cause (e.g. with gcc 4.12):

    mm/built-in.o: In function `shmem_alloc_hugepage':
    shmem.c:(.text+0x17570): undefined reference to `__compiletime_assert_1365'

To fix this, move the assignment to hindex after the check for huge
pages support.

Fixes: 800d8c63 ("shmem: add huge pages support")
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This clearly had never gotten tested, probably because you need a fairly
minimal configuration in order to disable DEBUG_FS (several other
options select it).

The dummy inline functions that were used for the no-DEBUG_FS case were
missing the argument names in the declarations.

Fixes: 1dac891c ("drm/i915: Register debugfs interface last")
Reported-and-tested-by: NJörg Otte <jrg.otte@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull tracing fixes from Steven Rostedt:
 "A few updates and fixes:

   - move the suppressing of the __builtin_return_address >0 warning to
     the tracing directory only.

   - metag recordmcount fix for newer glibc's

   - two tracing histogram fixes that were reported by KASAN"

* tag 'trace-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix use-after-free in hist_register_trigger()
  tracing: Fix use-after-free in hist_unreg_all/hist_enable_unreg_all
  Makefile: Mute warning for __builtin_return_address(>0) for tracing only
  ftrace/recordmcount: Work around for addition of metag magic but not relocations

With gcc < 4.2 (e.g. 4.1.2):

      CC      fs/proc/task_mmu.o
    cc1: error: unrecognized command line option "-Wno-override-init"

To fix this, only enable the compiler option when it is actually
supported by the compiler.

Fixes: ca52953f ("fs/proc/task_mmu.c: suppress compilation warnings with W=1")
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NValdis Kletnieks <valdis.kletnieks@vt.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:

 1) Fix several cases of missing of_node_put() calls in various
    networking drivers.  From Peter Chen.

 2) Don't try to remove unconfigured VLANs in qed driver, from Yuval
    Mintz.

 3) Unbalanced locking in TIPC error handling, from Wei Yongjun.

 4) Fix lockups in CPDMA driver, from Grygorii Strashko.

 5) More MACSEC refcount et al fixes, from Sabrina Dubroca.

 6) Fix MAC address setting in r8169 during runtime suspend, from
    Chun-Hao Lin.

 7) Various printf format specifier fixes, from Heinrich Schuchardt.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits)
  qed: Fail driver load in 100g MSI mode.
  ethernet: ti: davinci_emac: add missing of_node_put after calling of_parse_phandle
  ethernet: stmicro: stmmac: add missing of_node_put after calling of_parse_phandle
  ethernet: stmicro: stmmac: dwmac-socfpga: add missing of_node_put after calling of_parse_phandle
  ethernet: renesas: sh_eth: add missing of_node_put after calling of_parse_phandle
  ethernet: renesas: ravb_main: add missing of_node_put after calling of_parse_phandle
  ethernet: marvell: pxa168_eth: add missing of_node_put after calling of_parse_phandle
  ethernet: marvell: mvpp2: add missing of_node_put after calling of_parse_phandle
  ethernet: marvell: mvneta: add missing of_node_put after calling of_parse_phandle
  ethernet: hisilicon: hns: hns_dsaf_main: add missing of_node_put after calling of_parse_phandle
  ethernet: hisilicon: hns: hns_dsaf_mac: add missing of_node_put after calling of_parse_phandle
  ethernet: cavium: octeon: add missing of_node_put after calling of_parse_phandle
  ethernet: aurora: nb8800: add missing of_node_put after calling of_parse_phandle
  ethernet: arc: emac_main: add missing of_node_put after calling of_parse_phandle
  ethernet: apm: xgene: add missing of_node_put after calling of_parse_phandle
  ethernet: altera: add missing of_node_put
  8139too: fix system hang when there is a tx timeout event.
  qed: Fix error return code in qed_resc_alloc()
  net: qlcnic: avoid superfluous assignement
  dsa: b53: remove redundant if
  ...

Merge yet more updates from Andrew Morton:

 - the rest of ocfs2

 - various hotfixes, mainly MM

 - quite a bit of misc stuff - drivers, fork, exec, signals, etc.

 - printk updates

 - firmware

 - checkpatch

 - nilfs2

 - more kexec stuff than usual

 - rapidio updates

 - w1 things

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (111 commits)
  ipc: delete "nr_ipc_ns"
  kcov: allow more fine-grained coverage instrumentation
  init/Kconfig: add clarification for out-of-tree modules
  config: add android config fragments
  init/Kconfig: ban CONFIG_LOCALVERSION_AUTO with allmodconfig
  relay: add global mode support for buffer-only channels
  init: allow blacklisting of module_init functions
  w1:omap_hdq: fix regression
  w1: add helper macro module_w1_family
  w1: remove need for ida and use PLATFORM_DEVID_AUTO
  rapidio/switches: add driver for IDT gen3 switches
  powerpc/fsl_rio: apply changes for RIO spec rev 3
  rapidio: modify for rev.3 specification changes
  rapidio: change inbound window size type to u64
  rapidio/idt_gen2: fix locking warning
  rapidio: fix error handling in mbox request/release functions
  rapidio/tsi721_dma: advance queue processing from transfer submit call
  rapidio/tsi721: add messaging mbox selector parameter
  rapidio/tsi721: add PCIe MRRS override parameter
  rapidio/tsi721_dma: add channel mask and queue size parameters
  ...

Pull orangefs update from Martin Brandenburg:
 "Kernel side caching and executable bugfix

  This allows OrangeFS to utilize the dcache and adds an in kernel
  attribute cache.  We previously used the user side client for this
  purpose.

  We see a modest performance increase on small file operations.  For
  example, without the cache, compiling coreutils takes about 17
  minutes.  With the patch and a 50 millisecond timeout for
  dcache_timeout_msecs and getattr_timeout_msecs (the default),
  compiling coreutils takes about 6 minutes 20 seconds.  On the same
  hardware, compiling coreutils on an xfs filesystem takes 90 seconds.
  We see similar improvements with mdtest and a test involving writing,
  reading, and deleting a large number of small files.

  Interested parties can review more data at the following URL.

    https://docs.google.com/spreadsheets/d/1v4aUeppKexIbRMz_Yn9k4eaM3uy2KCaPoe_93YKWOtA/pubhtml

  The eventual goal of this is to allow getdents to turn into a
  readdirplus to the OrangeFS server.  The cache will be filled then,
  which should provide a performance benefit to the common case of
  readdir followed by getattr on each entry (i.e.  ls -l).

  This also fixes a bug.  When orangefs_inode_permission was added, it
  did not collect i_size from the OrangeFS server, since this presses an
  unnecessary load on the OrangeFS server.  However, it left a case
  where i_size is never initialized.  Then running an executable could
  fail.

  With this patch, size is always collected to be inserted into the
  cache.  Thus the bug disappears.  If this patch is not accepted during
  this merge window, we will send a one-line band-aid for this bug
  instead"

* tag 'for-linus-v4.8' of git://github.com/martinbrandenburg/linux:
  Orangefs: update orangefs.txt
  orangefs: Account for jiffies wraparound.
  orangefs: Change default dcache and getattr timeout to 50 msec.
  orangefs: Allow dcache and getattr cache time to be configured.
  orangefs: Cache getattr results.
  orangefs: Use d_time to avoid excessive lookups