Some of these chips are disabled until clock is enabled.
This fixes:
     http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=404107Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Driver needs to turn off carrier when down.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Driver needs to turn off carrier when down, otherwise it can
confuse bonding and bridging and looks like carrier is on immediately
when it is brought back up.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Update the FRV arch MAINTAINER record to get a hit on "grep -i frv".  Whilst
FR-V is technically correct, it's normally thought of as FRV.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The UCB1400 is missing a name parameter in the device_driver struct.
This causes missing information in the /sys tree and seems to cause
other problems with the AC97 functionality. This was tested on a PXA270
system.
Signed-off-by: NCliff Brake <cbrake@bec-systems.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-2.6.21' of master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart:
  [AGPGART] intel_agp: fix G965 GTT size detect

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: change deprecation status of dv1394

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IPoIB/cm: Fix DMA direction typo
  IB/iser: Don't defer connection failure notification to workqueue

* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Do not discard truncated input reports

* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: add "optical" to sysfs "media" attribute
  ide: ugly messages trying to open CD drive with no media present
  ide: correctly prevent IDE timer expiry function to run if request was already handled

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NETFILTER]: ipt_CLUSTERIP: fix oops in checkentry function
  [TCP]: slow_start_after_idle should influence cwnd validation too
  [SC92031]: Fix priv->lock context
  [NET_SCHED]: cls_tcindex: fix compatibility breakage

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] SGI Altix : fix pcibr_dmamap_ate32() bug
  [IA64] Fix CPU freq displayed in /proc/cpuinfo
  [IA64] Fix wrong assumption about irq and vector in msi_ia64.c
  [IA64] BTE error timer fix

Add "optical" to sysfs "media" attribute as already in /proc
Signed-off-by: NDanny Kukawka <dkukawka@suse.de>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

I get the following error messages when trying to open a CD device
(specifically, the Teac CD-ROM CD-224E) that has no media present:

hda: packet command error: status=3D0x51 { DriveReady SeekComplete Error }
hda: packet command error: error=3D0x54 { AbortedCommand LastFailedSense=0x05 }
ide: failed opcode was: unknown

This happens when a "start stop unit" command (0x1b 0 0 0 3 0 0 0 0 0)
is sent to the drive to try to close the CD-ROM tray, but this drive
doesn't have that capability (it's a slim portable-type CD-ROM), so it
reports sense key 5 (illegal request) with asc/ascq 24/0.  This is
exactly how SFF8090i says it should respond.

But ide-cd.c (in cdrom_decode_status() ) just sees sense key 5 and spews
out an error.  It then goes on to request sense data, and
cdrom_log_sense() understands this error and doesn't log it.

The patch, for kernel 2.6.20.4, suppresses this error message.
Signed-off-by: NStuart Hayes <stuart_hayes@dell.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

It is possible for the timer expiry function to run even though the
request has already been handled: ide_timer_expiry() only checks that
the handler is not NULL, but it is possible that we have handled a
request (thus clearing the handler) and then started a new request
(thus starting the timer again, and setting a handler). 

A simple way to exhibit this is to set the DMA timeout to 1 jiffy and
run dd: The kernel will panic after a few minutes because
ide_timer_expiry() tries to add a timer when it's already active.

To fix this, we simply add a request generation count that gets
incremented at every interrupt, and check in ide_timer_expiry() that
we have not already handled a new interrupt before running the expiry
function.
Signed-off-by: NSuleiman Souhlal <suleiman@google.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The clusterip_config_find_get() already increases entries reference
counter, so there is no reason to do it twice in checkentry() callback.

This causes the config to be freed before it is removed from the list,
resulting in a crash when adding the next rule.
Signed-off-by: NJaroslav Kysela <perex@suse.cz>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Receive buffers need to be mapped with DMA_FROM_DEVICE.  Incorrectly
mapping with DMA_TO_DEVICE causes a hard lock on ppc64 machines with
an IOMMU.

This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=431>
Signed-off-by: NMichael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

On G965, I810_PGETBL_CTL is a mmio offset, but we wrongly take it
as pci config space offset in detecting GTT size. This one line patch
fixs this.
Signed-off-by: NWang Zhenyu <zhenyu.z.wang@intel.com>
Signed-off-by: NDave Jones <davej@redhat.com>

For the cases that slow_start_after_idle are meant to deal
with, it is almost a certainty that the congestion window
tests will think the connection is application limited and
we'll thus decrease the cwnd there too.  This defeats the
whole point of setting slow_start_after_idle to zero.

So test it there too.

We do not cancel out the entire tcp_cwnd_validate() function
so that if the sysctl is changed we still have the validation
state maintained.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The spin_lock calls made in dev->open and dev->close must disable
BH since open/close are made in process context.  Conversely, the
call in dev->hard_start_xmit does not need to disable BH since it
is already executing with BH disabled.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Userspace uses an integer for TCA_TCINDEX_SHIFT, the kernel was changed
to expect and use a u16 value in 2.6.11, which broke compatibility on
big endian machines. Change back to use int.

Reported by Ole Reinartz <ole.reinartz@gmx.de>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'for-2.6.21' of master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart:
  [AGPGART] intel_agp: PCI id update for Intel 965GM

Nobody ported ffmpeg from dv1394 to rawiso yet, and there is no
justification to remove dv1394 right now.

Nevertheless, a strong deprecation of this ABI makes a lot of sense,
especially as Kristian H's drivers shape up to be an attractive
alternative to the existing ones.  But we don't have a schedule at the
moment.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

WARNING: arch/i386/kernel/built-in.o - Section mismatch: reference to .init.text:irqbalance_disable from .text between 'quirk_intel_irqbalance' (at offset 0x80a5) and 'i8237A_suspend'

Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.text:nvidia_bugs from .data between 'early_qrk' (at offset 0x8428) and 'enable_cpu_hotplug'
WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.text:via_bugs from .data between 'early_qrk' (at offset 0x8438) and 'enable_cpu_hotplug'
WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.text:ati_bugs from .data between 'early_qrk' (at offset 0x8448) and 'enable_cpu_hotplug'

The compiler is putting it into .data because the __initdata is in the wrong
place.

Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert omap_cf into a platform_driver ...  this resolves oopsing during
suspend/resume.

Evidently folk haven't tried suspend/resume on an OSK (the main platform
for this driver) since September or so, which is when platform_device
learned about suspend_late()/resume_early() and stopped being able to
suspend/resume without a platform_driver.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since lazy MMU batching mode still allows interrupts to enter, it is
possible for interrupt handlers to try to use kmap_atomic, which fails when
lazy mode is active, since the PTE update to highmem will be delayed.  The
best workaround is to issue an explicit flush in kmap_atomic_functions
case; this is the only way nested PTE updates can happen in the interrupt
handler.

Thanks to Jeremy Fitzhardinge for noting the bug and suggestions on a fix.

This patch gets reverted again when we start 2.6.22 and the bug gets fixed
differently.
Signed-off-by: NZachary Amsden <zach@vmware.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If rootmode isn't valid, we hit the BUG() in fuse_init_inode.  Now
EINVAL is returned.
Signed-off-by: NTimo Savola <tsavola@movial.fi>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update PCI id info for Intel 965GM chipset.
Signed-off-by: NWang Zhenyu <zhenyu.z.wang@intel.com>
Signed-off-by: NDave Jones <davej@redhat.com>

Getting rid of the p->children printout in show_task() left behind an
unused variable.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

the p->parent PID printout gives us all the information about the
task tree that we need - the eldest_child()/older_sibling()/
younger_sibling() printouts are mostly historic and i do not
remember ever having used those fields. (IMO in fact they confuse
the SysRq-T output.) So remove them.

This code has sentimental value though, those fields and
printouts are one of the oldest ones still surviving from
Linux v0.95's kernel/sched.c:

        if (p->p_ysptr || p->p_osptr)
                printk("   Younger sib=%d, older sib=%d\n\r",
                        p->p_ysptr ? p->p_ysptr->pid : -1,
                        p->p_osptr ? p->p_osptr->pid : -1);
        else
                printk("\n\r");

written 15 years ago, in early 1992.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus 'snif' Torvalds <torvalds@linux-foundation.org>

devres should be deallocated with devres_free() not kfree().  This bug
corrupts slab on IRQ request failure.  Fix it.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg KH <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Soeren Sonnenburg reported that upon resume he is getting
this backtrace:

 [<c0119637>] smp_apic_timer_interrupt+0x57/0x90
 [<c0142d30>] retrigger_next_event+0x0/0xb0
 [<c0104d30>] apic_timer_interrupt+0x28/0x30
 [<c0142d30>] retrigger_next_event+0x0/0xb0
 [<c0140068>] __kfifo_put+0x8/0x90
 [<c0130fe5>] on_each_cpu+0x35/0x60
 [<c0143538>] clock_was_set+0x18/0x20
 [<c0135cdc>] timekeeping_resume+0x7c/0xa0
 [<c02aabe1>] __sysdev_resume+0x11/0x80
 [<c02ab0c7>] sysdev_resume+0x47/0x80
 [<c02b0b05>] device_power_up+0x5/0x10

it turns out that on resume we mistakenly re-enable interrupts too
early.  Do the timer retrigger only on the current CPU.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NSoeren Sonnenburg <kernel@nn7.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [TG3]: Fix crash during tg3_init_one().
  [IPV6]: Revert recent change to rt6_check_dev().
  [XFRM]: beet: fix IP option decapsulation
  [XFRM]: beet: fix beet mode decapsulation
  [XFRM]: beet: use IPOPT_NOP for option padding
  [XFRM]: beet: fix IP option encapsulation

The driver will crash when the chip has been initialized by EFI before
tg3_init_one().  In this case, the driver will call tg3_chip_reset()
before allocating consistent memory.

The bug is fixed by checking for tp->hw_status before accessing it
during tg3_chip_reset().
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On a SGI Altix TIOCP based PCI bus we need to include the ATE_PIO attribute
bit if we're mapping a 32bit MSI address.
Signed-off-by: NMike Habeck <habeck@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

My patch: git commit=95235ca2 introduced a bug
in IA64 cpuinfo output.

Patch changed the proc_freq from 1HZ resolution to 1KHz resolution, but left
format string unchanged at " %lu.%06lu". Below is the fix.

Thanks to Bjorn for catching this.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This patch fixes a wrong assumption in ia64 MSI code that IRQ equals
vector.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

The bte recovery_timer was not being set correctly.
Signed-off-by: NRuss Anderson <rja@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This reverts a0d78ebf

It causes pings to link-local addresses to fail.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>