- 14 1月, 2011 2 次提交
-
-
由 Eric Dumazet 提交于
After recent changes, (percpu stats on vlan/tunnels...), we dont need anymore per struct netdev_queue tx_bytes/tx_packets/tx_dropped counters. Only remaining users are ixgbe, sch_teql, gianfar & macvlan : 1) ixgbe can be converted to use existing tx_ring counters. 2) macvlan incremented txq->tx_dropped, it can use the dev->stats.tx_dropped counter. 3) sch_teql : almost revert ab35cd4b (Use net_device internal stats) Now we have ndo_get_stats64(), use it, even for "unsigned long" fields (No need to bring back a struct net_device_stats) 4) gianfar adds a stats structure per tx queue to hold tx_bytes/tx_packets This removes a lockdep warning (and possible lockup) in rndis gadget, calling dev_get_stats() from hard IRQ context. Ref: http://www.spinics.net/lists/netdev/msg149202.htmlReported-by: NNeil Jones <neiljay@gmail.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Jarek Poplawski <jarkao2@gmail.com> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Sandeep Gopalpet <sandeep.kumar@freescale.com> CC: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pablo Neira Ayuso 提交于
This patch fixes a loop in ctnetlink_get_conntrack() that can be triggered if you use the same socket to receive events and to perform a GET operation. Under heavy load, netlink_unicast() may return -EAGAIN, this error code is reserved in nfnetlink for the module load-on-demand. Instead, we return -ENOBUFS which is the appropriate error code that has to be propagated to user-space. Reported-by: NHolger Eitzenberger <holger@eitzenberger.org> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 13 1月, 2011 3 次提交
-
-
由 Randy Dunlap 提交于
Fix new kernel-doc warning (copy-paste typo): Warning(net/ethernet/eth.c:366): No description found for parameter 'rxqs' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Kuznetsov 提交于
Linux IPv6 forwards unicast packets, which are link layer multicasts... The hole was present since day one. I was 100% this check is there, but it is not. The problem shows itself, f.e. when Microsoft Network Load Balancer runs on a network. This software resolves IPv6 unicast addresses to multicast MAC addresses. Signed-off-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KOVACS Krisztian 提交于
The IPv6 tproxy patches split IPv6 defragmentation off of conntrack, but failed to update the #ifdef stanzas guarding the defragmentation related fields and code in skbuff and conntrack related code in nf_defrag_ipv6.c. This patch adds the required #ifdefs so that IPv6 tproxy can truly be used without connection tracking. Original report: http://marc.info/?l=linux-netdev&m=129010118516341&w=2Reported-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NKOVACS Krisztian <hidden@balabit.hu> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 12 1月, 2011 5 次提交
-
-
由 Kees Cook 提交于
Commit fe10ae53 adds a memset() to clear the structure being sent back to userspace, but accidentally used the wrong size. Reported-by: NBrad Spengler <spender@grsecurity.net> Signed-off-by: NKees Cook <kees.cook@canonical.com> Cc: stable@kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
The netlink interface to dump the connection tracking table has a race when entries are deleted at the same time. A customer reported a crash and the backtrace showed thatctnetlink_dump_table was running while a conntrack entry was being destroyed. (see https://bugzilla.vyatta.com/show_bug.cgi?id=6402). According to RCU documentation, when using hlist_nulls the reader must handle the case of seeing a deleted entry and not proceed further down the linked list. The old code would continue which caused the scan to walk into the free list. This patch uses locking (rather than RCU) for this operation which is guaranteed safe, and no longer requires getting reference while doing dump operation. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Dang Hongwu 提交于
skb_cow_data() may allocate a new data buffer, so pointers on skb should be set after this function. Bug was introduced by commit dff3bb06 ("ah4: convert to ahash") and 8631e9bd ("ah6: convert to ahash"). Signed-off-by: NWang Xuefu <xuefu.wang@6wind.com> Acked-by: NKrzysztof Witek <krzysztof.witek@6wind.com> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
Maximum trunc length is defined by MAX_AH_AUTH_LEN (in bytes) and need to be checked when this value is set (in bits) by the user. In ah4.c and ah6.c a BUG_ON() checks this condiftion. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
inet_csk_bind_conflict() logic currently disallows a bind() if it finds a friend socket (a socket bound on same address/port) satisfying a set of conditions : 1) Current (to be bound) socket doesnt have sk_reuse set OR 2) other socket doesnt have sk_reuse set OR 3) other socket is in LISTEN state We should add the CLOSE state in the 3) condition, in order to avoid two REUSEADDR sockets in CLOSE state with same local address/port, since this can deny further operations. Note : a prior patch tried to address the problem in a different (and buggy) way. (commit fda48a0d tcp: bind() fix when many ports are bound). Reported-by: NGaspar Chilingarov <gasparch@gmail.com> Reported-by: NDaniel Baluta <daniel.baluta@gmail.com> Tested-by: NDaniel Baluta <daniel.baluta@gmail.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 1月, 2011 7 次提交
-
-
由 Kumar Sanghvi 提交于
Checks version field of IP in the receive path for GPRS/3G data and appropriately sets the value of skb->protocol. Signed-off-by: NSjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maxim Levitsky 提交于
IPv4 over firewire needs to be able to remove ARP entries from the ARP cache that belong to nodes that are removed, because IPv4 over firewire uses ARP packets for private information about nodes. This information becomes invalid as soon as node drops off the bus and when it reconnects, its only possible to start talking to it after it responded to an ARP packet. But ARP cache prevents such packets from being sent. Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
HTB takes into account skb is segmented in stats updates. Generalize this to all schedulers. They should use qdisc_bstats_update() helper instead of manipulating bstats.bytes and bstats.packets Add bstats_update() helper too for classes that use gnet_stats_basic_packed fields. Note : Right now, TCQ_F_CAN_BYPASS shortcurt can be taken only if no stab is setup on qdisc. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Added alloc_netdev_mqs function which allows the number of transmit and receive queues to be specified independenty. alloc_netdev_mq was changed to a macro to call the new function. Also added alloc_etherdev_mqs with same purpose. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Rosenberg 提交于
The size field should not be set until after the data is successfully copied in. Signed-off-by: NDan Rosenberg <drosenberg@vsecurity.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
Dan Rosenberg pointed out that there were some signed comparison bugs in the phonet protocol. http://marc.info/?l=full-disclosure&m=129424528425330&w=2 The problem is that we check for array overflows but "protocol" is signed and we don't check for array underflows. If you have already have CAP_SYS_ADMIN then you could use the bugs to get root, or someone could cause an oops by mistake. Signed-off-by: NDan Carpenter <error27@gmail.com> Acked-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Using "iptables -L" with a lot of rules have a too big BH latency. Jesper mentioned ~6 ms and worried of frame drops. Switch to a per_cpu seqlock scheme, so that taking a snapshot of counters doesnt need to block BH (for this cpu, but also other cpus). This adds two increments on seqlock sequence per ipt_do_table() call, its a reasonable cost for allowing "iptables -L" not block BH processing. Reported-by: NJesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Patrick McHardy <kaber@trash.net> Acked-by: NStephen Hemminger <shemminger@vyatta.com> Acked-by: NJesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 10 1月, 2011 8 次提交
-
-
由 Jesse Gross 提交于
In order to compute the features for other offloads (primarily scatter/gather), we need to first check the ability of the NIC to offload the checksum for the packet. Since we have already computed this, we can directly use the result instead of figuring it out again. Signed-off-by: NJesse Gross <jesse@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesse Gross 提交于
This switches skb_need_linearize() to use the features that have been centrally computed. In doing so, this fixes a problem where scatter/gather should not be used because the card does not support checksum offloading on that type of packet. On device registration we only check that some form of checksum offloading is available if scatter/gatther is enabled but we must also check at transmission time. Examples of this include IPv6 or vlan packets on a NIC that only supports IPv4 offloading. Signed-off-by: NJesse Gross <jesse@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesse Gross 提交于
This switches dev_gso_segment() to use the device features computed by the centralized routine. In doing so, it fixes a problem where it would always use dev->features, instead of those appropriate to the number of vlan tags if any are present. Signed-off-by: NJesse Gross <jesse@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesse Gross 提交于
Now that there is a single function that can compute the device features relevant to a packet, we don't want to run it for each offload. This converts netif_needs_gso() to take the features of the device, rather than computing them itself. Signed-off-by: NJesse Gross <jesse@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesse Gross 提交于
netif_get_vlan_features() is currently only used by netif_needs_gso(), so it only concerns itself with GSO features. However, several other places also should take into account the contents of the packet when deciding whether to offload to hardware. This generalizes the function to return features about all of the various forms of offloading. Since offloads tend to be linked together, this avoids duplicating the logic in each location (i.e. the scatter/gather code also needs the checksum logic). Suggested-by: NMichał Mirosław <mirqus@gmail.com> Signed-off-by: NJesse Gross <jesse@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesse Gross 提交于
We currently only have software fallback for one type of checksum: the TCP/UDP one's complement. This means that a protocol that uses hardware offloading for a different type of checksum (FCoE, SCTP) must directly check the device's features and do the right thing ahead of time. By the time we get to dev_can_checksum(), we're only deciding whether to apply the one algorithm in software or hardware. NETIF_F_HW_CSUM has the same capabilities as the software version, so we should always use it if present. The primary advantage of this is multiply tagged vlans can use hardware checksumming. Signed-off-by: NJesse Gross <jesse@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
Fix new kernel-doc notation warning in net/core/filter.c: Warning(net/core/filter.c:172): No description found for parameter 'fentry' Warning(net/core/filter.c:172): Excess function parameter 'filter' description in 'sk_run_filter' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Due to NLM_F_DUMP is composed of two bits, NLM_F_ROOT | NLM_F_MATCH, when doing "if (x & NLM_F_DUMP)", it tests for _either_ of the bits being set. Because NLM_F_MATCH's value overlaps with NLM_F_EXCL, non-dump requests with NLM_F_EXCL set are mistaken as dump requests. Substitute the condition to test for _all_ bits being set. Signed-off-by: NJan Engelhardt <jengelh@medozas.de> Acked-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 1月, 2011 15 次提交
-
-
由 Gerrit Renker 提交于
The 'seq_window' sysctl sets the initial value for the DCCP Sequence Window, which may range from 32..2^46-1 (RFC 4340, 7.5.2). The patch sets the upper bound consistently to 2^32-1 on both 32 and 64 bit systems, which should be sufficient - with a RTT of 1sec and 1-byte packets, a seq_window of 2^32-1 corresponds to a link speed of 34 Gbps. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
-
由 Samuel Jero 提交于
Currently dccp_check_seqno allows any valid packet to update the Greatest Sequence Number Received, even if that packet's sequence number is less than the current GSR. This patch adds a check to make sure that the new packet's sequence number is greater than GSR. Signed-off-by: NSamuel Jero <sj323707@ohio.edu> Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
-
由 Samuel Jero 提交于
Currently dccp_check_seqno returns 0 (indicating a valid packet) if the acknowledgment number is out of bounds and the sync that RFC 4340 mandates at this point is currently being rate-limited. This function should return -1, indicating an invalid packet. Signed-off-by: NSamuel Jero <sj323707@ohio.edu> Acked-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
-
由 Nick Piggin 提交于
The problem that this patch aims to fix is vfsmount refcounting scalability. We need to take a reference on the vfsmount for every successful path lookup, which often go to the same mount point. The fundamental difficulty is that a "simple" reference count can never be made scalable, because any time a reference is dropped, we must check whether that was the last reference. To do that requires communication with all other CPUs that may have taken a reference count. We can make refcounts more scalable in a couple of ways, involving keeping distributed counters, and checking for the global-zero condition less frequently. - check the global sum once every interval (this will delay zero detection for some interval, so it's probably a showstopper for vfsmounts). - keep a local count and only taking the global sum when local reaches 0 (this is difficult for vfsmounts, because we can't hold preempt off for the life of a reference, so a counter would need to be per-thread or tied strongly to a particular CPU which requires more locking). - keep a local difference of increments and decrements, which allows us to sum the total difference and hence find the refcount when summing all CPUs. Then, keep a single integer "long" refcount for slow and long lasting references, and only take the global sum of local counters when the long refcount is 0. This last scheme is what I implemented here. Attached mounts and process root and working directory references are "long" references, and everything else is a short reference. This allows scalable vfsmount references during path walking over mounted subtrees and unattached (lazy umounted) mounts with processes still running in them. This results in one fewer atomic op in the fastpath: mntget is now just a per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock and non-atomic decrement in the common case. However code is otherwise bigger and heavier, so single threaded performance is basically a wash. Signed-off-by: NNick Piggin <npiggin@kernel.dk>
-
由 Nick Piggin 提交于
Regardless of how much we possibly try to scale dcache, there is likely always going to be some fundamental contention when adding or removing children under the same parent. Pseudo filesystems do not seem need to have connected dentries because by definition they are disconnected. Signed-off-by: NNick Piggin <npiggin@kernel.dk>
-
由 Nick Piggin 提交于
Reduce some branches and memory accesses in dcache lookup by adding dentry flags to indicate common d_ops are set, rather than having to check them. This saves a pointer memory access (dentry->d_op) in common path lookup situations, and saves another pointer load and branch in cases where we have d_op but not the particular operation. Patched with: git grep -E '[.>]([[:space:]])*d_op([[:space:]])*=' | xargs sed -e 's/\([^\t ]*\)->d_op = \(.*\);/d_set_d_op(\1, \2);/' -e 's/\([^\t ]*\)\.d_op = \(.*\);/d_set_d_op(\&\1, \2);/' -i Signed-off-by: NNick Piggin <npiggin@kernel.dk>
-
由 Nick Piggin 提交于
Pseudo filesystems that don't put inode on RCU list or reachable by rcu-walk dentries do not need to RCU free their inodes. Signed-off-by: NNick Piggin <npiggin@kernel.dk>
-
由 Nick Piggin 提交于
RCU free the struct inode. This will allow: - Subsequent store-free path walking patch. The inode must be consulted for permissions when walking, so an RCU inode reference is a must. - sb_inode_list_lock to be moved inside i_lock because sb list walkers who want to take i_lock no longer need to take sb_inode_list_lock to walk the list in the first place. This will simplify and optimize locking. - Could remove some nested trylock loops in dcache code - Could potentially simplify things a bit in VM land. Do not need to take the page lock to follow page->mapping. The downsides of this is the performance cost of using RCU. In a simple creat/unlink microbenchmark, performance drops by about 10% due to inability to reuse cache-hot slab objects. As iterations increase and RCU freeing starts kicking over, this increases to about 20%. In cases where inode lifetimes are longer (ie. many inodes may be allocated during the average life span of a single inode), a lot of this cache reuse is not applicable, so the regression caused by this patch is smaller. The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU, however this adds some complexity to list walking and store-free path walking, so I prefer to implement this at a later date, if it is shown to be a win in real situations. I haven't found a regression in any non-micro benchmark so I doubt it will be a problem. Signed-off-by: NNick Piggin <npiggin@kernel.dk>
-
由 Nick Piggin 提交于
Change d_delete from a dentry deletion notification to a dentry caching advise, more like ->drop_inode. Require it to be constant and idempotent, and not take d_lock. This is how all existing filesystems use the callback anyway. This makes fine grained dentry locking of dput and dentry lru scanning much simpler. Signed-off-by: NNick Piggin <npiggin@kernel.dk>
-
由 Changli Gao 提交于
Since nf_bridge_maybe_copy_header() may change the length of skb, we should check the length of skb after it to handle the ppoe skbs. Signed-off-by: NChangli Gao <xiaosuo@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pablo Neira Ayuso 提交于
In 1ae4de0c, the secctx was exported via the /proc/net/netfilter/nf_conntrack and ctnetlink interfaces instead of the secmark. That patch introduced the use of security_secid_to_secctx() which may return a non-zero value on error. In one of my setups, I have NF_CONNTRACK_SECMARK enabled but no security modules. Thus, security_secid_to_secctx() returns a negative value that results in the breakage of the /proc and `conntrack -L' outputs. To fix this, we skip the inclusion of secctx if the aforementioned function fails. This patch also fixes the dynamic netlink message size calculation if security_secid_to_secctx() returns an error, since its logic is also wrong. This problem exists in Linux kernel >= 2.6.37. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Changli Gao 提交于
Since nf_ct_expect_dst_hash() may be called without nf_conntrack_lock locked, nf_ct_expect_hash_rnd should be initialized in the atomic way. In this patch, we use nf_conntrack_hash_rnd instead of nf_ct_expect_hash_rnd. Signed-off-by: NChangli Gao <xiaosuo@gmail.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
RFC3168 (The Addition of Explicit Congestion Notification to IP) states : 5.3. Fragmentation ECN-capable packets MAY have the DF (Don't Fragment) bit set. Reassembly of a fragmented packet MUST NOT lose indications of congestion. In other words, if any fragment of an IP packet to be reassembled has the CE codepoint set, then one of two actions MUST be taken: * Set the CE codepoint on the reassembled packet. However, this MUST NOT occur if any of the other fragments contributing to this reassembly carries the Not-ECT codepoint. * The packet is dropped, instead of being reassembled, for any other reason. This patch implements this requirement for IPv4, choosing the first action : If one fragment had NO-ECT codepoint reassembled frame has NO-ECT ElIf one fragment had CE codepoint reassembled frame has CE Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
The original code has a use after free bug because it's not using the _safe() version of the list_for_each_entry() macro. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
There is a "goto nla_put_failure" hidden inside the NLA_PUT() macro, but we're holding the dcb_lock so we need to unlock first. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-