- 26 6月, 2006 40 次提交
-
-
由 David Brownell 提交于
This is an "RTC-framework" driver for DS1307 and similar RTC chips, It should be a full replacement for the existing ds1337.c driver (using the older RTC glue), giving a net increase in the number of RTC chips that work out-of-the-box. There's a whole cluster of RTCs that are very similar, but the 1337 driver was a bit too picky to work with most of them. Still no support for RTC alarm IRQs (on chips that support them). Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJames Chapman <jchapman@katalix.com> Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jesper Juhl 提交于
sysrq SAK is described as being something you should mistake for SAK from c2 compliant systems - whoops. What's meant is that it should *not* be mistaken as such. Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Engelhardt 提交于
Currently, enabling/disabling printk timestamps is only possible through reboot (bootparam) or recompile. I normally do not run with timestamps (since syslog handles that in a good manner), but for measuring small kernel delays (e.g. irq probing - see parport thread) I needed subsecond precision, but then again, just for some minutes rather than all kernel messages to come. The following patch adds a module_param() with which the timestamps can be en-/disabled in a live system through /sys/modules/printk/parameters/printk_time. Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Wu Fengguang 提交于
In radix_tree_tag_get(), return normalized value of 0/1, as indicated by its comment. Signed-off-by: NWu Fengguang <wfg@mail.ustc.edu.cn> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Davide Libenzi 提交于
A few days ago Arjan signaled a lockdep red flag on epoll locks, and precisely between the epoll's device structure lock (->lock) and the wait queue head lock (->lock). Like I explained in another email, and directly to Arjan, this can't happen in reality because of the explicit check at eventpoll.c:592, that does not allow to drop an epoll fd inside the same epoll fd. Since lockdep is working on per-structure locks, it will never be able to know of policies enforced in other parts of the code. It was decided time ago of having the ability to drop epoll fds inside other epoll fds, that triggers a very trick wakeup operations (due to possibly reentrant callback-driven wakeups) handled by the ep_poll_safewake() function. While looking again at the code though, I noticed that all the operations done on the epoll's main structure wait queue head (->wq) are already protected by the epoll lock (->lock), so that locked-style functions can be used to manipulate the ->wq member. This makes both a lock-acquire save, and lockdep happy. Running totalmess on my dual opteron for a while did not reveal any problem so far: http://www.xmailserver.org/totalmess.cSigned-off-by: NDavide Libenzi <davidel@xmailserver.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: Jens Axboe <axboe@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Valerie Henson 提交于
This patch makes EXT2_DEBUG work again. Due to lack of proper include file, EXT2_DEBUG was undefined in bitmap.c and ext2_count_free() is left out. Moved to balloc.c and removed bitmap.c entirely. Second, debug versions of ext2_count_free_{inodes/blocks} reacquires superblock lock. Moved lock into callers. Signed-off-by: NVal Henson <val_henson@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
Why is it marked unused when in fact it's used? Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
On UP, this: cpumask_t mask = node_to_cpumask(numa_node_id()); for_each_cpu_mask(cpu, mask) does this: mm/readahead.c: In function `node_readahead_aging': mm/readahead.c:850: warning: unused variable `mask' which is unpleasantly fixed by this: Acked-by: NPaul Jackson <pj@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 H. Peter Anvin 提交于
Make makes sysctl non-optional unless EMBEDDED is set. There are a number of interfaces exposed via sysctl, enough that it has to be considered core kernel functionality at this point. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
Add WARN_ON_ONCE(cond) to print once-per-bootup messages. [rostedt@goodmis.org: improve code generation] Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 H. Peter Anvin 提交于
Make procfs non-optional unless EMBEDDED is set, just like sysfs. procfs is already de facto required for a large subset of Linux functionality. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Put short function description for read_cache_pages() on one line as needed by kernel-doc. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mingming Cao 提交于
Convert the ext3 in-kernel filesystem blocks to ext3_fsblk_t. Convert the rest of all unsigned long type in-kernel filesystem blocks to ext3_fsblk_t, and replace the printk format string respondingly. Signed-off-by: NMingming Cao <cmm@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mingming Cao 提交于
Some of the in-kernel ext3 block variable type are treated as signed 4 bytes int type, thus limited ext3 filesystem to 8TB (4kblock size based). While trying to fix them, it seems quite confusing in the ext3 code where some blocks are filesystem-wide blocks, some are group relative offsets that need to be signed value (as -1 has special meaning). So it seem saner to define two types of physical blocks: one is filesystem wide blocks, another is group-relative blocks. The following patches clarify these two types of blocks in the ext3 code, and fix the type bugs which limit current 32 bit ext3 filesystem limit to 8TB. With this series of patches and the percpu counter data type changes in the mm tree, we are able to extend exts filesystem limit to 16TB. This work is also a pre-request for the recent >32 bit ext3 work, and makes the kernel to able to address 48 bit ext3 block a lot easier: Simply redefine ext3_fsblk_t from unsigned long to sector_t and redefine the format string for ext3 filesystem block corresponding. Two RFC with a series patches have been posted to ext2-devel list and have been reviewed and discussed: http://marc.theaimsgroup.com/?l=ext2-devel&m=114722190816690&w=2 http://marc.theaimsgroup.com/?l=ext2-devel&m=114784919525942&w=2 Patches are tested on both 32 bit machine and 64 bit machine, <8TB ext3 and >8TB ext3 filesystem(with the latest to be released e2fsprogs-1.39). Tests includes overnight fsx, tiobench, dbench and fsstress. This patch: Defines ext3_fsblk_t and ext3_grpblk_t, and the printk format string for filesystem wide blocks. This patch classifies all block group relative blocks, and ext3_fsblk_t blocks occurs in the same function where used to be confusing before. Also include kernel bug fixes for filesystem wide in-kernel block variables. There are some fileystem wide blocks are treated as int/unsigned int type in the kernel currently, especially in ext3 block allocation and reservation code. This patch fixed those bugs by converting those variables to ext3_fsblk_t(unsigned long) type. Signed-off-by: NMingming Cao <cmm@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Fix section warning: WARNING: drivers/scsi/megaraid/megaraid_mbox.o - Section mismatch: reference to .init.text: from .text between 'megaraid_probe_one' (at offset 0x171e) and 'megaraid_queue_command' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy.Dunlap 提交于
From: Randy Dunlap <rdunlap@xenotime.net> Fix section mismatch in wd7000 driver: WARNING: drivers/scsi/wd7000.o - Section mismatch: reference to .init.text: from .text after 'wd7000_detect' (at offset 0xa5d) WARNING: drivers/scsi/wd7000.o - Section mismatch: reference to .init.text: from .text after 'wd7000_detect' (at offset 0xab6) WARNING: drivers/scsi/wd7000.o - Section mismatch: reference to .init.text: from .text after 'wd7000_detect' (at offset 0xb67 Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ben Dooks 提交于
Driver for the simple parallel port interface on the Asix AX88796 chip on an platform_bus. [akpm@osdl.org: x86_64 build fix] Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Matt Helsley 提交于
copy_process() appears to be the only caller of acct_clear_integrals() and does not pass in NULL task pointers. Remove the unecessary check. Signed-off-by: NMatt Helsley <matthltc@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
As described in a previous patch and documented in mm/filemap.h, copy_from_user_inatomic* shouldn't zero out the tail of the buffer after an incomplete copy. This patch implements that change for i386. For the _nocache version, a new __copy_user_intel_nocache is defined similar to copy_user_zeroio_intel_nocache, and this is ultimately used for the copy. For the regular version, __copy_from_user_ll_nozero is defined which uses __copy_user and __copy_user_intel - the later needs casts to reposition the __user annotations. If copy_from_user_atomic is given a constant length of 1, 2, or 4, then we do still zero the destintion on failure. This didn't seem worth the effort of fixing as the places where it is used really don't care. Signed-off-by: NNeil Brown <neilb@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: William Lee Irwin III <wli@holomorphy.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
The problem is that when we write to a file, the copy from userspace to pagecache is first done with preemption disabled, so if the source address is not immediately available the copy fails *and* *zeros* *the* *destination*. This is a problem because a concurrent read (which admittedly is an odd thing to do) might see zeros rather that was there before the write, or what was there after, or some mixture of the two (any of these being a reasonable thing to see). If the copy did fail, it will immediately be retried with preemption re-enabled so any transient problem with accessing the source won't cause an error. The first copying does not need to zero any uncopied bytes, and doing so causes the problem. It uses copy_from_user_atomic rather than copy_from_user so the simple expedient is to change copy_from_user_atomic to *not* zero out bytes on failure. The first of these two patches prepares for the change by fixing two places which assume copy_from_user_atomic does zero the tail. The two usages are very similar pieces of code which copy from a userspace iovec into one or more page-cache pages. These are changed to remove the assumption. The second patch changes __copy_from_user_inatomic* to not zero the tail. Once these are accepted, I will look at similar patches of other architectures where this is important (ppc, mips and sparc being the ones I can find). This patch: There is a problem with __copy_from_user_inatomic zeroing the tail of the buffer in the case of an error. As it is called in atomic context, the error may be transient, so it results in zeros being written where maybe they shouldn't be. In the usage in filemap, this opens a window for a well timed read to see data (zeros) which is not consistent with any ordering of reads and writes. Most cases where __copy_from_user_inatomic is called, a failure results in __copy_from_user being called immediately. As long as the latter zeros the tail, the former doesn't need to. However in *copy_from_user_iovec implementations (in both filemap and ntfs/file), it is assumed that copy_from_user_inatomic will zero the tail. This patch removes that assumption, so that after this patch it will be safe for copy_from_user_inatomic to not zero the tail. This patch also adds some commentary to filemap.h and asm-i386/uaccess.h. After this patch, all architectures that might disable preempt when kmap_atomic is called need to have their __copy_from_user_inatomic* "fixed". This includes - powerpc - i386 - mips - sparc Signed-off-by: NNeil Brown <neilb@suse.de> Cc: David Howells <dhowells@redhat.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: William Lee Irwin III <wli@holomorphy.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andreas Mohr 提交于
constify a medium-large CRC code table. Signed-off-by: NAndreas Mohr <andi@lisas.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andreas Mohr 提交于
Signed-off-by: NAndreas Mohr <andi@lisas.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chris Wright 提交于
This is redundant with check in wakeup_kswapd. Signed-off-by: NChris Wright <chrisw@sous-sol.org> Acked-by: NPaul Jackson <pj@sgi.com> Acked-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Wilder 提交于
Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jesper Juhl 提交于
Do a *partial* CodingStyle cleanup, correct some spelling in printk()'s && convert C++ comments to C comments - in moxa driver. Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jesper Juhl 提交于
Remove pointless check of 'tty' argument vs NULL from moxa driver. Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jesper Juhl 提交于
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Acked-by: NAlan Cox <alan@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Theodore Ts'o 提交于
This was reported as Debian bug #336604. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Theodore Ts'o 提交于
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Theodore Ts'o 提交于
The variable i is guaranteed to be the same as db_count given the previous for loop. So get rid of it since it's dead code. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mingming Cao 提交于
If ext3 filesystem is larger than 2TB, and sector_t is a u32 (i.e. CONFIG_LBD not defined in the kernel), the calculation of the disk sector will overflow. Add check at ext3_fill_super() and ext3_group_extend() to prevent mount/remount/resize >2TB ext3 filesystem if sector_t size is 4 bytes. Verified this patch on a 32 bit platform without CONFIG_LBD defined (sector_t is 32 bits long), mount refuse to mount a 10TB ext3. Signed-off-by: Mingming Cao<cmm@us.ibm.com> Acked-by: NAndreas Dilger <adilger@clusterfs.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
schedule_on_each_cpu() presently does a large kmalloc - 96 kbytes on 1024 CPU 64-bit. Rework it so that we do one 8192-byte allocation and then a pile of tiny ones, via alloc_percpu(). This has a much higher chance of success (100% in the current VM). This also has the effect of reducing the memory requirements from NR_CPUS*n to num_possible_cpus()*n. Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Fix indentation. Quote a brace '{' so that vi won't be fooled by it. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Drop leading space of kernel-doc section contents. "Section" data (contents) are split from the section header (e.g., Note: below is a section header: * Note: list_empty on entry does not return true after this, the entry is * in an undefined state. ). Currently the data/contents begins with a space and is left that way, which causes it to look bad when printed (in text mode; see example below), so just remove the leading space. Note: list_empty on entry does not return true after this, the entry is in an undefined state. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chris Wedgwood 提交于
Lots of people use this. Apparently RH has for over 18 months so lets drop EXPERIMENTAL. Signed-off-by: NChris Wedgwood <cw@f00f.org> Cc: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
pdflush is carefully designed to ensure that all wakeups have some corresponding work to do - if a woken-up pdflush thread discovers that it hasn't been given any work to do then this is considered an error. That all broke when swsusp came along - because a timer-delivered wakeup to a frozen pdflush thread will just get lost. This causes the pdflush thread to get lost as well: the writeback timer is supposed to be re-armed by pdflush in process context, but pdflush doesn't execute the callout which does this. Fix that up by ignoring the return value from try_to_freeze(): jsut proceed, see if we have any work pending and only go back to sleep if that is not the case. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
WARNING: drivers/block/cpqarray.o - Section mismatch: reference to .init.text: from .text between 'cpqarray_register_ctlr' (at offset 0xe98) and 'alloc_cpqarray_hba' WARNING: drivers/block/cpqarray.o - Section mismatch: reference to .init.text: from .text between 'cpqarray_register_ctlr' (at offset 0xe9c) and 'alloc_cpqarray_hba' Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alan Cox 提交于
This is a patch from Alan that fixes a real ide-cd.c regression causing bogus "Media Check" failures for perfectly valid Fedora install ISOs, on certain CD-ROM drives. This is a forward port to 2.6.16 (from RHEL) of the minimal changes for the end of media problem. It may not be sufficient for some controllers (promise notably) and it does not touch the locking so the error path locking is as horked as in mainstream. From: Ingo Molnar <mingo@elte.hu> I have ported the patch to 2.6.17-rc4 and tested it by provoking end-of-media IO errors with an unaligned ISO image. Unlike the vanilla kernel, the patched kernel interpreted the error condition correctly with 512 byte granularity: hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown ATAPI device hdc: Error: Illegal request -- (Sense key=0x05) Illegal mode for this track or incompatible medium -- (asc=0x64, ascq=0x00) The failed "Read 10" packet command was: "28 00 00 04 fb 78 00 00 06 00 00 00 00 00 00 00 " end_request: I/O error, dev hdc, sector 1306080 Buffer I/O error on device hdc, logical block 163260 Buffer I/O error on device hdc, logical block 163261 Buffer I/O error on device hdc, logical block 163262 the unpatched kernel produces an incorrect error dump: hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown end_request: I/O error, dev hdc, sector 1306080 Buffer I/O error on device hdc, logical block 163260 hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown end_request: I/O error, dev hdc, sector 1306088 Buffer I/O error on device hdc, logical block 163261 hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown end_request: I/O error, dev hdc, sector 1306096 Buffer I/O error on device hdc, logical block 163262 I do not have the right type of CD-ROM drive to reproduce the end-of-media data corruption bug myself, but this same patch in RHEL solved it. Signed-off-by: NIngo Molnar <mingo@elte.hu> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Jens Axboe <axboe@suse.de> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Use loop "cursor" instead of loop "counter" for list iterator descriptions. They are not counters, they are pointers or positions. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-