1. 14 2月, 2013 1 次提交
  2. 20 7月, 2012 2 次提交
    • M
      s390/vtimer: rework virtual timer interface · 27f6b416
      Martin Schwidefsky 提交于
      The current virtual timer interface is inherently per-cpu and hard to
      use. The sole user of the interface is appldata which uses it to execute
      a function after a specific amount of cputime has been used over all cpus.
      
      Rework the virtual timer interface to hook into the cputime accounting.
      This makes the interface independent from the CPU timer interrupts, and
      makes the virtual timers global as opposed to per-cpu.
      Overall the code is greatly simplified. The downside is that the accuracy
      is not as good as the original implementation, but it is still good enough
      for appldata.
      Reviewed-by: NJan Glauber <jang@linux.vnet.ibm.com>
      Reviewed-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
      Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      27f6b416
    • H
      s390/comments: unify copyright messages and remove file names · a53c8fab
      Heiko Carstens 提交于
      Remove the file name from the comment at top of many files. In most
      cases the file name was wrong anyway, so it's rather pointless.
      
      Also unify the IBM copyright statement. We did have a lot of sightly
      different statements and wanted to change them one after another
      whenever a file gets touched. However that never happened. Instead
      people start to take the old/"wrong" statements to use as a template
      for new files.
      So unify all of them in one go.
      Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
      a53c8fab
  3. 06 12月, 2011 1 次提交
  4. 26 5月, 2011 1 次提交
  5. 23 5月, 2011 1 次提交
  6. 13 8月, 2010 1 次提交
  7. 08 7月, 2010 1 次提交
    • E
      net: fix 64 bit counters on 32 bit arches · 28172739
      Eric Dumazet 提交于
      There is a small possibility that a reader gets incorrect values on 32
      bit arches. SNMP applications could catch incorrect counters when a
      32bit high part is changed by another stats consumer/provider.
      
      One way to solve this is to add a rtnl_link_stats64 param to all
      ndo_get_stats64() methods, and also add such a parameter to
      dev_get_stats().
      
      Rule is that we are not allowed to use dev->stats64 as a temporary
      storage for 64bit stats, but a caller provided area (usually on stack)
      
      Old drivers (only providing get_stats() method) need no changes.
      Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      28172739
  8. 09 6月, 2010 1 次提交
  9. 30 3月, 2010 1 次提交
    • T
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking... · 5a0e3ad6
      Tejun Heo 提交于
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
      
      percpu.h is included by sched.h and module.h and thus ends up being
      included when building most .c files.  percpu.h includes slab.h which
      in turn includes gfp.h making everything defined by the two files
      universally available and complicating inclusion dependencies.
      
      percpu.h -> slab.h dependency is about to be removed.  Prepare for
      this change by updating users of gfp and slab facilities include those
      headers directly instead of assuming availability.  As this conversion
      needs to touch large number of source files, the following script is
      used as the basis of conversion.
      
        http://userweb.kernel.org/~tj/misc/slabh-sweep.py
      
      The script does the followings.
      
      * Scan files for gfp and slab usages and update includes such that
        only the necessary includes are there.  ie. if only gfp is used,
        gfp.h, if slab is used, slab.h.
      
      * When the script inserts a new include, it looks at the include
        blocks and try to put the new include such that its order conforms
        to its surrounding.  It's put in the include block which contains
        core kernel includes, in the same order that the rest are ordered -
        alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
        doesn't seem to be any matching order.
      
      * If the script can't find a place to put a new include (mostly
        because the file doesn't have fitting include block), it prints out
        an error message indicating which .h file needs to be added to the
        file.
      
      The conversion was done in the following steps.
      
      1. The initial automatic conversion of all .c files updated slightly
         over 4000 files, deleting around 700 includes and adding ~480 gfp.h
         and ~3000 slab.h inclusions.  The script emitted errors for ~400
         files.
      
      2. Each error was manually checked.  Some didn't need the inclusion,
         some needed manual addition while adding it to implementation .h or
         embedding .c file was more appropriate for others.  This step added
         inclusions to around 150 files.
      
      3. The script was run again and the output was compared to the edits
         from #2 to make sure no file was left behind.
      
      4. Several build tests were done and a couple of problems were fixed.
         e.g. lib/decompress_*.c used malloc/free() wrappers around slab
         APIs requiring slab.h to be added manually.
      
      5. The script was run on all .h files but without automatically
         editing them as sprinkling gfp.h and slab.h inclusions around .h
         files could easily lead to inclusion dependency hell.  Most gfp.h
         inclusion directives were ignored as stuff from gfp.h was usually
         wildly available and often used in preprocessor macros.  Each
         slab.h inclusion directive was examined and added manually as
         necessary.
      
      6. percpu.h was updated not to include slab.h.
      
      7. Build test were done on the following configurations and failures
         were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
         distributed build env didn't work with gcov compiles) and a few
         more options had to be turned off depending on archs to make things
         build (like ipr on powerpc/64 which failed due to missing writeq).
      
         * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
         * powerpc and powerpc64 SMP allmodconfig
         * sparc and sparc64 SMP allmodconfig
         * ia64 SMP allmodconfig
         * s390 SMP allmodconfig
         * alpha SMP allmodconfig
         * um on x86_64 SMP allmodconfig
      
      8. percpu.h modifications were reverted so that it could be applied as
         a separate patch and serve as bisection point.
      
      Given the fact that I had only a couple of failures from tests on step
      6, I'm fairly confident about the coverage of this conversion patch.
      If there is a breakage, it's likely to be something in one of the arch
      headers which should be easily discoverable easily on most builds of
      the specific arch.
      Signed-off-by: NTejun Heo <tj@kernel.org>
      Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
      5a0e3ad6
  10. 16 12月, 2009 1 次提交
  11. 19 11月, 2009 1 次提交
  12. 11 11月, 2009 1 次提交
  13. 24 9月, 2009 1 次提交
  14. 16 6月, 2009 1 次提交
  15. 23 4月, 2009 1 次提交
  16. 14 4月, 2009 1 次提交
  17. 25 12月, 2008 1 次提交
  18. 20 11月, 2008 1 次提交
  19. 28 10月, 2008 1 次提交
  20. 14 7月, 2008 2 次提交
  21. 26 6月, 2008 1 次提交
  22. 30 5月, 2008 1 次提交
  23. 20 11月, 2007 1 次提交
  24. 12 10月, 2007 2 次提交
  25. 11 10月, 2007 1 次提交
    • E
      [NET]: Make the device list and device lookups per namespace. · 881d966b
      Eric W. Biederman 提交于
      This patch makes most of the generic device layer network
      namespace safe.  This patch makes dev_base_head a
      network namespace variable, and then it picks up
      a few associated variables.  The functions:
      dev_getbyhwaddr
      dev_getfirsthwbytype
      dev_get_by_flags
      dev_get_by_name
      __dev_get_by_name
      dev_get_by_index
      __dev_get_by_index
      dev_ioctl
      dev_ethtool
      dev_load
      wireless_process_ioctl
      
      were modified to take a network namespace argument, and
      deal with it.
      
      vlan_ioctl_set and brioctl_set were modified so their
      hooks will receive a network namespace argument.
      
      So basically anthing in the core of the network stack that was
      affected to by the change of dev_base was modified to handle
      multiple network namespaces.  The rest of the network stack was
      simply modified to explicitly use &init_net the initial network
      namespace.  This can be fixed when those components of the network
      stack are modified to handle multiple network namespaces.
      
      For now the ifindex generator is left global.
      
      Fundametally ifindex numbers are per namespace, or else
      we will have corner case problems with migration when
      we get that far.
      
      At the same time there are assumptions in the network stack
      that the ifindex of a network device won't change.  Making
      the ifindex number global seems a good compromise until
      the network stack can cope with ifindex changes when
      you change namespaces, and the like.
      Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      881d966b
  26. 27 7月, 2007 1 次提交
  27. 19 6月, 2007 1 次提交
  28. 10 5月, 2007 1 次提交
    • R
      Add suspend-related notifications for CPU hotplug · 8bb78442
      Rafael J. Wysocki 提交于
      Since nonboot CPUs are now disabled after tasks and devices have been
      frozen and the CPU hotplug infrastructure is used for this purpose, we need
      special CPU hotplug notifications that will help the CPU-hotplug-aware
      subsystems distinguish normal CPU hotplug events from CPU hotplug events
      related to a system-wide suspend or resume operation in progress.  This
      patch introduces such notifications and causes them to be used during
      suspend and resume transitions.  It also changes all of the
      CPU-hotplug-aware subsystems to take these notifications into consideration
      (for now they are handled in the same way as the corresponding "normal"
      ones).
      
      [oleg@tv-sign.ru: cleanups]
      Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
      Cc: Gautham R Shenoy <ego@in.ibm.com>
      Cc: Pavel Machek <pavel@ucw.cz>
      Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      8bb78442
  29. 04 5月, 2007 1 次提交
  30. 29 4月, 2007 1 次提交
  31. 27 4月, 2007 1 次提交
  32. 26 4月, 2007 1 次提交
    • R
      [NET]: Inline net_device_stats · c45d286e
      Rusty Russell 提交于
      Network drivers which keep stats allocate their own stats structure
      then write a get_stats() function to return them.  It would be nice if
      this were done by default.
      
      1) Add a new "stats" field to "struct net_device".
      2) Add a new feature field to say "this driver uses the internal one"
      3) Have a default "get_stats" which returns NULL if that feature not set.
      4) Change callers to check result of get_stats call for NULL, not if
         ->get_stats is set.
      
      This should not break backwards compatibility with older drivers, yet
      allow modern drivers to shed some boilerplate code.
      
      Lightly tested: works for a modified lguest network driver.
      Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c45d286e
  33. 15 3月, 2007 1 次提交
  34. 15 2月, 2007 3 次提交
  35. 06 2月, 2007 1 次提交