These can all be trigged from userspace if you pass the right values.

v2: rebase on later kernel.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Merge tag 'drm-intel-next-2012-04-23' of git://people.freedesktop.org/~danvet/drm-intel into drm-core-next

Daniel Vetter writes:

A new drm-intel-next pull. Highlights:
- More gmbus patches from Daniel Kurtz, I think gmbus is now ready, all
 known issues fixed.
- Fencing cleanup and pipelined fencing removal from Chris.
- rc6 residency interface from Ben, useful for powertop.
- Cleanups and code reorg around the ringbuffer code (Ben&me).
- Use hw semaphores in the pageflip code from Ben.
- More vlv stuff from Jesse, unfortunately his vlv cpu is doa, so less
 merged than I've hoped for - we still have the unused function warning :(
- More hsw patches from Eugeni, again, not yet enabled fully.
- intel_pm.c refactoring from Eugeni.
- Ironlake sprite support from Chris.
- And various smaller improvements/fixes all over the place.

Note that this pull request also contains a backmerge of -rc3 to sort out
a few things in -next. I've also had to frob the shortlog a bit to exclude
anything that -rc3 brings in with this pull.

Regression wise we have a few strange bugs going on, but for all of them
closer inspection revealed that they've been pre-existing, just now
slightly more likely to be hit. And for most of them we have a patch
already. Otherwise QA has not reported any regressions, and I'm also not
aware of anything bad happening in 3.4.

* tag 'drm-intel-next-2012-04-23' of git://people.freedesktop.org/~danvet/drm-intel: (420 commits)
  drm/i915: rc6 residency (fix the fix)
  drm/i915/tv: fix open-coded ARRAY_SIZE.
  drm/i915: invalidate render cache on gen2
  drm/i915: Silence the change of LVDS sync polarity
  drm/i915: add generic power management initialization
  drm/i915: move clock gating functionality into intel_pm module
  drm/i915: move emon functionality into intel_pm module
  drm/i915: move drps, rps and rc6-related functions to intel_pm
  drm/i915: fix line breaks in intel_pm
  drm/i915: move watermarks settings into intel_pm module
  drm/i915: move fbc-related functionality into intel_pm module
  drm/i915: Refactor get_fence() to use the common fence writing routine
  drm/i915: Refactor fence clearing to use the common fence writing routine
  drm/i915: Refactor put_fence() to use the common fence writing routine
  drm/i915: Prepare to consolidate fence writing
  drm/i915: Remove the unsightly "optimisation" from flush_fence()
  drm/i915: Simplify fence finding
  drm/i915: Discard the unused obj->last_fenced_ring
  drm/i915: Remove unused ring->setup_seqno
  drm/i915: Remove fence pipelining
  ...

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Tested-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If we want hdmi_offset to be relative to the first block, zero value can
be used also for enabled block.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Tested-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

R6xx has routable blocks, but there's nothing wrong in assignment based
on dig_encoder. We didn't really need that algorithm.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Tested-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Tested-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Tested-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

this fixes a report that the new load code needed to be updated for
ajax's validity changes.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This helper macro retrieves the fractional part of a fixed20_12 20.12
fixed-point number.
Signed-off-by: NRobert Morell <rmorell@nvidia.com>
Signed-off-by: NOlof Johansson <olofj@chromium.org>
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Some boards such as the Intel D2700MUD allow you to have over 4GB of RAM.
The GTT on the PVR based devices is 32bit however. Hugh Dickins points out
that we should therefore be setting the mapping gfp mask.

This is not the whole fix for the problem. Some further shmem patches will
be needed to deal with the corner cases.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This provides the needed callback hooks to add hotplug display support to
the GMA36x0 devices.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

In particular clean up the errata handling and correct the crtc masks. We do
this a bit differently using our device abstraction for neatness.

This doesn't address the ACPI opregion and hotplug plumbing, nor the IRQ related
changes that will need. It touches on backlight init but the full backlight
support is not in this change set.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The problem in console mode is lack of linear memory. We can solve that by
dropping to 16bpp. The mode setting X server will allocate its own GEM
framebuffer in 32bpp and all will be well.

We could just do 16bpp anyway but that would be a regression on the lower
modes as many distributions don't yet ship the generic mode setting KMS
drivers.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Introduce a panel presence check for Cedartrail. Non netbook devices don't
necessarily have a panel attached.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Pull in various i915 bits that we will need to begin tackling the LVDS detect
and ACPI events. We try and drift towards the i915 version of the code with
the long term goal that at least some of it can one day be unified.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We don't want them uncached, combining will do nicely and fixes the performance
problem with the generic modesetting X server.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

We need to pull more stuff from the VBT in order to configure the clocking
correctly in all cases. Add the relevant bits from the other CDV driver work.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This was reported a long time ago (and I apologize to whoever it was that
reported it as I've lost the original report).
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

EDID vendor IDs are always 3 characters long (4 with the terminating
0).  It doesn't make any sense to have a (possibly 8-byte) pointer
to the ID string in the quirk structure.
Signed-off-by: NIan Pilcher <arequipeno@gmail.com>
Reviewed-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Requiring the first byte of the EDID base block header to be 0 means we
don't fix up as many transfer errors as we could.  Instead have the
callers specify whether it's meant to be block 0 or not, and
conditionally run header fixup based on that.

Bugzilla: https://bugzilla.redhat.com/812890Signed-off-by: NAdam Jackson <ajax@redhat.com>
Reviewed-by: NAlex Deucher <alexdeucher@gmail.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This fixes the build breakage reported by Stephen in -next
when merging the drm-next tree.
Signed-off-by: NDave Airlie <airlied@redhat.com>

The error handling code w.r.t. idr usage looks inconsistent.

In the case of drm_mode_object_get() and drm_ctxbitmap_next() the error
handling is also incomplete.

Unify the code to follow the same pattern always.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Since Matthew's changes we have to select arbitration.

Reported-by: devh on #radeon
Signed-off-by: NDave Airlie <airlied@redhat.com>

EFI doesn't typically make use of the legacy VGA ROM, but it may still be
configured to pass that through to a given video device. This may lead to
an inaccurate choice of default video device. Add support to efifb to pick
out the correct active video device.

v2: fix if->ifdef
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Acked-by: hpa@zytor.com
Cc: matt.fleming@intel.com
Signed-off-by: NDave Airlie <airlied@redhat.com>

IORESOURCE_ROM_SHADOW is not necessarily an indication that the hardware
is the primary device. Add support for using the vgaarb functions and
fall back if nothing's set them.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Cc: mingo@redhat.com
Acked-by: hpa@zytor.com
Signed-off-by: NDave Airlie <airlied@redhat.com>

vga-switcheroo currently changes the default VGA device by fiddling with
the IORESOURCE_ROM_SHADOW flag on the device. This isn't strictly accurate,
since there's no guarantee that switching also changes the ROM decoding.
Switch over to using the vgaarb functions for this.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The default VGA device is a somewhat fluid concept on platforms with
multiple GPUs. Add support for setting it so switching code can update
things appropriately, and make sure that the sysfs code returns the right
device if it's changed.

v2: Updated to fix builds when __ARCH_HAS_VGA_DEFAULT_DEVICE is false.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Acked-by: benh@kernel.crashing.org
Cc: airlied@redhat.com
Signed-off-by: NDave Airlie <airlied@redhat.com>

- add support for rs6xx
- add support for DCE4/5
- fixup 6xx/7xx
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds register definitions for HDMI/DP audio on
DCE2/3/4/5 hardware.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Improve handling of bpc (bits per color) in radeon.
In most cases we want 8 except for HDMI, DP, LVDS, and eDP.

v2: handle DP better.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Tested-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This regression has been introduced in

commit f56f821f
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sun Mar 25 19:47:41 2012 +0200

    mm: extend prefault helpers to fault in more than PAGE_SIZE

I have failed to notice this because x86 asm seems to happily compile
things as-is.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The new structs added in struct detailed_data_monitor_range must be
marked with packed attribute although the outer struct itself is
already marked as packed.  Otherwise these 7-bytes structs may be
aligned, and give the wrong position and size for the data.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Acked-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

HD panel (1366x768) found most commonly on laptops can't be represented
exactly in CVT/DMT expression, which leads to 1368x768 instead, because
1366 can't be divided by 8.

Add a hack to convert to 1366x768 manually as an exception.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Acked-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Chris' fix for my 32b breakage was incorrect. do_div returns a
remainder. Go back to a divide macro which is more 32b friendly.

Tested on x86-64.

This has only been compile tested on 32b systems.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48756
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Sincere-apologies: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NBen Widawsky <benjamin.widawsky@intel.com>
[danvet: fixup 32bit compile-fail.]
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NDave Airlie <airlied@redhat.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

[airlied: fixed one more new one added since]
Signed-off-by: NJim Cromie <jim.cromie@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Reviewed-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>