- 22 5月, 2011 2 次提交
-
-
由 Suresh Siddha 提交于
Apic probe now looks at the apic drivers listed in the .apicdrivers section. Remove apic_probe[] and make each apic driver static. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Tested-by: NCyrill Gorcunov <gorcunov@openvz.org> Cc: steiner@sgi.com Cc: gorcunov@openvz.org Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110521005526.341718626@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Suresh Siddha 提交于
This will pave the way for each apic driver to be self-contained and eliminate the need for apic_probe[]. Order in which apic drivers are listed in the .apicdrivers section is important, as this determines the apic probe order. And this is enforced by the ordering of apic driver files in the Makefile and the macros apic_driver()/apic_drivers(). Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Tested-by: NCyrill Gorcunov <gorcunov@openvz.org> Cc: steiner@sgi.com Cc: gorcunov@openvz.org Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110521005526.068775085@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 20 5月, 2011 1 次提交
-
-
由 Suresh Siddha 提交于
Use the unused probe routine in the apic driver to finalize the apic model selection. This cleans up the default_setup_apic_routing() and this probe routine in future can also be used for doing any apic model specific initialisation. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Acked-by: NCyrill Gorcunov <gorcunov@openvz.org> Cc: steiner@sgi.com Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110519234637.247458931@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 28 1月, 2011 2 次提交
-
-
由 Tejun Heo 提交于
apic->apicid_to_node() is 32bit specific apic operation which determines NUMA node for a CPU. Depending on the APIC implementation, it can be easier to determine NUMA node from either physical or logical apicid. Currently, ->apicid_to_node() takes @logical_apicid and calls hard_smp_processor_id() if the physical apicid is needed. This prevents NUMA mapping from being queried from a different CPU, which in turn makes it impossible to initialize NUMA mapping before SMP bringup. This patch replaces apic->apicid_to_node() with ->x86_32_numa_cpu_node() which takes @cpu, from which both logical and physical apicids can easily be determined. While at it, drop duplicate implementations from bigsmp_32 and summit_32, and use the default one. Signed-off-by: NTejun Heo <tj@kernel.org> Reviewed-by: NPekka Enberg <penberg@kernel.org> Cc: eric.dumazet@gmail.com Cc: yinghai@kernel.org Cc: brgerst@gmail.com Cc: gorcunov@gmail.com Cc: shaohui.zheng@intel.com Cc: rientjes@google.com LKML-Reference: <1295789862-25482-13-git-send-email-tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
After the previous patch, apic->cpu_to_logical_apicid() is no longer used. Kill it. For apic types with custom cpu_to_logical_apicid() which is also used for other purposes, remove the function and modify its users to do the mapping directly. #ifdef's on CONFIG_SMP in es7000_32 and summit_32 are ignored during conversion as they are not used for UP kernels. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: eric.dumazet@gmail.com Cc: yinghai@kernel.org Cc: brgerst@gmail.com Cc: gorcunov@gmail.com Cc: penberg@kernel.org Cc: shaohui.zheng@intel.com Cc: rientjes@google.com LKML-Reference: <1295789862-25482-7-git-send-email-tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 04 2月, 2010 1 次提交
-
-
由 Jasper Spaans 提交于
Make the comment match the code, this also holds for intel systems, according to probe_64.c in the same directory. Signed-off-by: NJasper Spaans <spaans@fox-it.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 19 1月, 2010 1 次提交
-
-
由 Suresh Siddha 提交于
Chris McDermott from IBM confirmed that hurricane chipset in IBM summit platforms doesn't support logical flat mode. Irrespective of the other things like apic_id's, total number of logical cpu's, Linux kernel should default to physical mode for this system. The 32-bit kernel does so using the OEM checks for the IBM summit platform. Add a similar OEM platform check for the 64bit kernel too. Otherwise the linux kernel boot can hang on this platform under certain bios/platform settings. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Tested-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Chris McDermott <lcm@linux.vnet.ibm.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 12月, 2009 1 次提交
-
-
由 Suresh Siddha 提交于
John Blackwood reported: > on an older Dell PowerEdge 6650 system with 8 cpus (4 are hyper-threaded), > and 32 bit (x86) kernel, once you change the irq smp_affinity of an irq > to be less than all cpus in the system, you can never change really the > irq smp_affinity back to be all cpus in the system (0xff) again, > even though no error status is returned on the "/bin/echo ff > > /proc/irq/[n]/smp_affinity" operation. > > This is due to that fact that BAD_APICID has the same value as > all cpus (0xff) on 32bit kernels, and thus the value returned from > set_desc_affinity() via the cpu_mask_to_apicid_and() function is treated > as a failure in set_ioapic_affinity_irq_desc(), and no affinity changes > are made. set_desc_affinity() is already checking if the incoming cpu mask intersects with the cpu online mask or not. So there is no need for the apic op cpu_mask_to_apicid_and() to check again and return BAD_APICID. Remove the BAD_APICID return value from cpu_mask_to_apicid_and() and also fix set_desc_affinity() to return -1 instead of using BAD_APICID to represent error conditions (as cpu_mask_to_apicid_and() can return logical or physical apicid values and BAD_APICID is really to represent bad physical apic id). Reported-by: NJohn Blackwood <john.blackwood@ccur.com> Root-caused-by: NJohn Blackwood <john.blackwood@ccur.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <1261103386.2535.409.camel@sbs-t61> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 18 5月, 2009 1 次提交
-
-
由 Yinghai Lu 提交于
should not call that if apic is disabled. [ Impact: fix crash on certain UP configs ] Signed-off-by: NYinghai Lu <yinghai@kernel.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> LKML-Reference: <4A09CCBB.2000306@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 11 5月, 2009 1 次提交
-
-
由 Yinghai Lu 提交于
Impact: fix fadt version checking FADT2_REVISION_ID has value 3 aka rev 3 FADT. So need to use >= instead of >, as other places in the code do. [ Impact: extend scope of APIC boot quirk ] Signed-off-by: NYinghai Lu <yinghai@kernel.org> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 08 4月, 2009 1 次提交
-
-
由 Yinghai Lu 提交于
Impact: restore old behavior for flat and phys_flat Signed-off-by: Yinhai Lu <yinghai@kernel.org. LKML-Reference: <49DCBBF1.8080903@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 25 3月, 2009 1 次提交
-
-
由 Yinghai Lu 提交于
Impact: cleanup Use online_mask directly on 64bit too. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rusty Russell <rusty@rustcorp.com.au> LKML-Reference: <49C94DAE.9070300@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 26 2月, 2009 2 次提交
-
-
由 Ingo Molnar 提交于
Impact: cleanup - rename apic->wakeup_cpu to apic->wakeup_secondary_cpu, to make it apparent that this is an SMP-only method - handle NULL ->wakeup_secondary_cpus to mean the default INIT wakeup sequence - this allows simplification of the APIC driver templates. Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Impact: cleanup x86_quirks->update_apic() calling looks crazy. so try to remove it: 1. every apic take wakeup_cpu member directly 2. separate es7000_apic to es7000_apic_cluster 3. use uv_wakeup_cpu directly Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 18 2月, 2009 4 次提交
-
-
由 Ingo Molnar 提交于
arch/x86/kernel/ is getting a bit crowded, and the APIC drivers are scattered into various different files. Move them to arch/x86/kernel/apic/*, and also remove the 'gen' prefix from those which had it. Also move APIC related functionality: the IO-APIC driver, the NMI and the IPI code. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Impact: cleanup Now that all APIC code is consolidated there's nothing 'gen' about apics anymore - so rename 'struct genapic' to 'struct apic'. This shortens the code and is nicer to read as well. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Impact: cleanup It's not used by anything anymore. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Impact: cleanup Remove genapic.h and remove all references to it. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 17 2月, 2009 1 次提交
-
-
由 Yinghai Lu 提交于
Impact: cleanup make it simpler, don't need have one extra struct. v2: fix the sgi_uv build Signed-off-by: NYinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 30 1月, 2009 1 次提交
-
-
由 Yinghai Lu 提交于
Impact: 32-bit should use logical version there are two version: for default_send_IPI_mask_sequence/allbutself one in ipi.h and one in ipi.c for 32bit it seems .h version overwrote ipi.c for a while. restore it so 32 bit could use its old logical version. also remove dupicated functions in .c Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 29 1月, 2009 17 次提交
-
-
由 Ingo Molnar 提交于
Move its definitions into apic.h. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Nothing actually restores the NMI vector - so remove this logic altogether. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
64-bit x86 has zero for ->trampoline_phys_low/high, but the smpboot code can use these values - so it's better to set them up to their correct values. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Our send_IPI_*() methods and definitions are a twisted mess: the same symbol is defined to different things depending on .config details, in a non-transparent way. - spread out the quirks into separately named per apic driver methods - prefix the standard PC methods with default_ - get rid of wrapper macro obfuscation - clean up various details Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- spread out the namespace on a per driver basis - clean up the functions - get rid of macros Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- spread out the namespace on a per driver basis - get rid of wrapper macros Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- spread out the namespace on a per driver basis - get rid of macro wrappers - small cleanups Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- unify the call signature of 64-bit to that of 32-bit - clean up the types all around - clean up namespace contamination Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- spread out the namespace to per driver methods - extend it to 64-bit as well so that we can use apic->check_phys_apicid_present() unconditionally Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- separate the namespace - remove macros Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
These flags are completely unused. (the in-kernel IRQ balancer has been removed from the upstream kernel.) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
This field name was unreasonably long - shorten it. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Impact: cleanup The bigsmp and es7000 subarchitectures un-defined APIC_DEST_LOGICAL in a rather nasty way by re-defining it to zero. That is infinitely fragile and makes it very hard to see what to code really does in a given context. The very same constant has different meanings and values - depending on which subarch is enabled. Untangle this mess by never undefining the constant, but instead propagating the right values into the genapic driver templates. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
the ->ESR_DISABLE shouting variant was used to enable the esr_disable macro wrappers. Those ugly macros are removed now so we can rename ->ESR_DISABLE to ->disable_esr Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
int_delivery_mode is supposed to mean 'interrupt delivery mode', but it's quite a misnomer as 'int' we usually think of as an integer type ... The standard naming for such attributes is 'irq' - so rename the following fields and macros: int_delivery_mode => irq_delivery_mode INT_DELIVERY_MODE => IRQ_DELIVERY_MODE int_dest_mode => irq_dest_mode INT_DEST_MODE => IRQ_DEST_MODE Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- reorder fields so that they appear in struct genapic field ordering - add zero-initialized fields too so that it's apparent which functionality is default / missing. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- reorder fields so that they appear in struct genapic field ordering - add zero-initialized fields too so that it's apparent which functionality is default / missing. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 18 12月, 2008 1 次提交
-
-
由 Mike Travis 提交于
Impact: fix potential APIC crash In determining the destination apicid, there are usually three cpumasks that are considered: the incoming cpumask arg, cfg->domain and the cpu_online_mask. Since we are just introducing the cpu_mask_to_apicid_and function, make sure it includes the cpu_online_mask in it's evaluation. [Added with this patch.] There are two io_apic.c functions that did not previously use the cpu_online_mask: setup_IO_APIC_irq and msi_compose_msg. Both of these simply used cpu_mask_to_apicid(cfg->domain & TARGET_CPUS), and all but one arch (NUMAQ[*]) returns only online cpus in the TARGET_CPUS mask, so the behavior is identical for all cases. [*: NUMAQ bug?] Note that alloc_cpumask_var is only used for the 32-bit cases where it's highly likely that the cpumask set size will be small and therefore CPUMASK_OFFSTACK=n. But if that's not the case, failing the allocate will cause the same return value as the default. Signed-off-by: NMike Travis <travis@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 17 12月, 2008 2 次提交
-
-
由 Mike Travis 提交于
This patch simply changes cpumask_t to struct cpumask and similar trivial modernizations. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NMike Travis <travis@sgi.com>
-
由 Mike Travis 提交于
Impact: use updated APIs Various API updates for x86:add-cpu_mask_to_apicid_and (Note: separate because previous patch has been "backported" to 2.6.27.) Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NMike Travis <travis@sgi.com>
-