There's not much point in checking the return value from every config space
access because the only likely errors are design-time things like unaligned
accesses or invalid register numbers.  The checking clutters the code
significantly, so this patch removes it.

No functional change.

Reference: http://lkml.kernel.org/r/CA+55aFzP4xEbcNmZ+MS0SQ3LrULzSq+dBiT_X9U-bPpR-Ukgrw@mail.gmail.comSigned-off-by: NBjorn Helgaas <bhelgaas@google.com>

The pciehp_readw() and pciehp_writew() wrappers only look up the pci_dev
and call the PCIe Capability accessors, so we can make things a little
more straightforward by just using the PCIe Capability accessors directly.

No functional change.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Make sure RTC-interrupts are disabled at shutdown.

As the RTC is generally powered by backup power (VDDBU), its interrupts
are not disabled on wake-up, user, watchdog or software reset.  This
could cause troubles on other systems (e.g.  older kernels) if an
interrupt occurs before a handler has been installed at next boot.

Let us be well-behaved and disable them on clean shutdowns at least (as
do the RTT-based rtc-at91sam9 driver).
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove CONFIG_USE_GENERIC_SMP_HELPERS left by commit 0a06ff06
("kernel: remove CONFIG_USE_GENERIC_SMP_HELPERS").
Signed-off-by: NYuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If the VIF thread is still running after unbinding the Tx and Rx IRQs
in xenvif_disconnect(), the thread may attempt to raise an event which
will BUG (as the irq is unbound).
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Acked-by: NWei Liu <wei.liu2@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

airlied:
The lifetime changes introduced in 5bdebb18
tried to use device_create, however that led to the regression where dev->type
wasn't getting set correctly. First attempt at fixing it would have led to
a race, so this undoes the device_createa work and does it all manually
making sure the dev->type is setup before we register the device.
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This patch releases a vma object when cleaning up userptr resources.
A new vma object was allocated and copied when getting userptr pages
so the new vma object should be freed properly if the userptr pages
aren't used anymore.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

In iSCSI negotiations with initiator CHAP enabled, usernames with
trailing garbage are permitted, because the string comparison only
checks the strlen of the configured username.

e.g. "usernameXXXXX" will be permitted to match "username".

Just check one more byte so the trailing null char is also matched.
Signed-off-by: NEric Seppanen <eric@purestorage.com>
Cc: <stable@vger.kernel.org> #3.1+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

extract_param() is called with max_length set to the total size of the
output buffer.  It's not safe to allow a parameter length equal to the
buffer size as the terminating null would be written one byte past the
end of the output buffer.
Signed-off-by: NEric Seppanen <eric@purestorage.com>
Cc: <stable@vger.kernel.org> #3.1+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Add auto-MDI/MDI-X capability for forced (autonegotiation disabled)
10/100 Mbps speeds on Vitesse VSC82x4 PHYs. Exported previously static
function genphy_setup_forced() required by the new config_aneg handler
in the Vitesse PHY module.
Signed-off-by: NMadalin Bucur <madalin.bucur@freescale.com>
Signed-off-by: NShruti Kanetkar <Shruti@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Vitesse VSC8662 is Dual Port 10/100/1000Base-T Phy
Its register set and features are similar to other Vitesse Phys.
Signed-off-by: NSandeep Singh <Sandeep@freescale.com>
Signed-off-by: NAndy Fleming <afleming@gmail.com>
Signed-off-by: NShruti Kanetkar <Shruti@Freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The VSC8574 is a quad-port Gigabit Ethernet transceiver with four SerDes
interfaces for quad-port dual media capability.
Signed-off-by: NShaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: NAndy Fleming <afleming@gmail.com>
Signed-off-by: NShruti Kanetkar <Shruti@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Vitesse VSC8234 is quad port 10/100/1000BASE-T PHY
with SGMII and SERDES MAC interfaces.
Signed-off-by: NAndy Fleming <afleming@gmail.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NShruti Kanetkar <Shruti@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch now always passes msg->msg_namelen as 0. recvmsg handlers must
set msg_namelen to the proper size <= sizeof(struct sockaddr_storage)
to return msg_name to the user.

This prevents numerous uninitialized memory leaks we had in the
recvmsg handlers and makes it harder for new code to accidentally leak
uninitialized memory.

Optimize for the case recvfrom is called with NULL as address. We don't
need to copy the address at all, so set it to NULL before invoking the
recvmsg handler. We can do so, because all the recvmsg handlers must
cope with the case a plain read() is called on them. read() also sets
msg_name to NULL.

Also document these changes in include/linux/net.h as suggested by David
Miller.

Changes since RFC:

Set msg->msg_name = NULL if user specified a NULL in msg_name but had a
non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't
affect sendto as it would bail out earlier while trying to copy-in the
address. It also more naturally reflects the logic by the callers of
verify_iovec.

With this change in place I could remove "
if (!uaddr || msg_sys->msg_namelen == 0)
	msg->msg_name = NULL
".

This change does not alter the user visible error logic as we ignore
msg_namelen as long as msg_name is NULL.

Also remove two unnecessary curly brackets in ___sys_recvmsg and change
comments to netdev style.

Cc: David Miller <davem@davemloft.net>
Suggested-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The pcie_portdrv .probe() method calls pci_enable_device() once, in
pcie_port_device_register(), but the .remove() method calls
pci_disable_device() twice, in pcie_port_device_remove() and in
pcie_portdrv_remove().

That causes a "disabling already-disabled device" warning when removing a
PCIe port device.  This happens all the time when removing Thunderbolt
devices, but is also easy to reproduce with, e.g.,
"echo 0000:00:1c.3 > /sys/bus/pci/drivers/pcieport/unbind"

This patch removes the disable from pcie_portdrv_remove().

[bhelgaas: changelog, tag for stable]
Reported-by: NDavid Bulkow <David.Bulkow@stratus.com>
Reported-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v2.6.32+

The data from the hardware should be little endian. Correct the
declaration.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The maximum packet number which a tx aggregation buffer could contain
is the tx_qlen.

	tx_qlen = buffer size / (packet size + descriptor size).

If the tx buffer is empty and the queued packets are more than the
maximum value which is defined above, stop the tx queue. Wake the
tx queue if tx queue is stopped and the queued packets are less than
tx_qlen.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove the code for sending the packet in the rtl8152_start_xmit().
Let rtl8152_start_xmit() to queue the packet only, and schedule a
tasklet to send the queued packets. This simplify the code and make
sure all the packet would be sent by the original order.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The tx/rx would access the memory which is out of the desired range.
Modify the method of checking the end of the memory to avoid it.

For r8152_tx_agg_fill(), the variable remain may become negative.
However, the declaration is unsigned, so the while loop wouldn't
break when reaching the end of the desied memory. Although to change
the declaration from unsigned to signed is enough to fix it, I also
modify the checking method for safe. Replace

		remain = rx_buf_sz - sizeof(*tx_desc) -
			 (u32)((void *)tx_data - agg->head);

with

		remain = rx_buf_sz - (int)(tx_agg_align(tx_data) - agg->head);

to make sure the variable remain is always positive. Then, the
overflow wouldn't happen.

For rx_bottom(), the rx_desc should not be used to calculate the
packet length before making sure the rx_desc is in the desired range.
Change the checking to two parts. First, check the descriptor is in
the memory. The other, using the descriptor to find out the packet
length and check if the packet is in the memory.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch exposes default_erl as a TPG attribute so that it may be
set TPG wide in demo-mode, but still allow the existing NodeACL
attribute to be overridden on a per initiator basis.
Reported-by: NArshad Hussain <arshad.hussain@calsoftinc.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Split up the various ALUA states into individual attributes to
make parsing easier and adhere to the one value per attribute
sysfs principle.

(nab: Convert strict_strtoul -> kstrtoul usage)
Signed-off-by: NHannes Reinecke <hare@suse.de>

Signed-off-by: NHannes Reinecke <hare@suse.de>

The supported ALUA states might be different for individual
devices, so store it in a separate field.

(nab: Remove unnecessary line continuation)
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Rename ALUA_ACCESS_STATE_OPTMIZED to
ALUA_ACCESS_STATE_OPTIMIZED.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Since acpi_bus_get_device() returns plain int and not acpi_status,
ACPI_FAILURE() should not be used for checking its return value.  Fix
that.
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

This regression has been introduced in

commit 4fe8590a
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date:   Wed Sep 4 18:25:22 2013 +0300

    drm/i915: Use adjusted_mode appropriately when computing watermarks

I guess we should renable the enabled local variable into something a
notch more descriptive, but that's something for -next.

The effect on my i945gme netbook is pretty severe amounts of underruns
- usually the very first pixel gets used for the entire screeen.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Addresses
"[BUG] completely bonkers use of set_need_resched + VM_FAULT_NOPAGE".

In the first occurence it was used to try to be nice while releasing the
mmap_sem and retrying the fault to work around a locking inversion.
The second occurence was never used.

There has been some discussion whether we should change the locking order to
mmap_sem -> bo_reserve. This patch doesn't address that issue, and leaves
that locking order undefined. The solution that we release the mmap_sem if
tryreserve fails and wait for the buffer to become unreserved is something
we want in any case, and follows how the core vm system waits for pages
to be come unlocked while releasing the mmap_sem.

The code also outlines what needs to be changed if we want to establish the
locking order as mmap_sem -> bo::reserve.

One slight issue that remains with this code is that the fault handler might
be prone to starvation if another thread countinously reserves the buffer.
IMO that usage pattern is highly unlikely.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>

If ttm_bo_move_memcpy was instructed to move a non-populated ttm to
io memory, it would first populate the ttm, then move the data and then
destroy the ttm. That's stupid. However, some drivers might have relied on
this to clear io memory from old stuff. So instead of a NOP, which would
be the most efficient, just clear the destination.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>

This patch changes iscsit_sequence_cmd() logic to no longer reject
non-immediate CmdSNs that exceed MaxCmdSN with a protocol error,
but instead silently ignore them.

This is done to correctly follow RFC-3720 Section 3.2.2.1:

   For non-immediate commands, the CmdSN field can take any
   value from ExpCmdSN to MaxCmdSN inclusive.  The target MUST silently
   ignore any non-immediate command outside of this range or non-
   immediate duplicates within the range.
Reported-by: NSantosh Kulkarni <santosh.kulkarni@calsoftinc.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch converts a handful of iscsi_session statistics to type
atomic_long_t, instead of using iscsi_session->session_stats_lock
when incrementing these values.

More importantly, go ahead and drop the spinlock usage within
iscsit_setup_scsi_cmd(), iscsit_check_dataout_hdr(),
iscsit_send_datain(), and iscsit_build_rsp_pdu() fast-path code.

(Squash in Roland's  target: Remove write-only stats fields and lock
from struct se_node_acl)
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

It isn't safe to call it without holding the vblk->vq_lock.
Reported-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NShaohua Li <shli@fusionio.com>

Fixed another condition of virtqueue_kick() not holding the lock.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

It appears that driver runs into a problem here if fibsize is too small
because we allocate user_srbcmd with fibsize size only but later we
access it until user_srbcmd->sg.count to copy it over to srbcmd.

It is not correct to test (fibsize < sizeof(*user_srbcmd)) because this
structure already includes one sg element and this is not needed for
commands without data.  So, we would recommend to add the following
(instead of test for fibsize == 0).
Signed-off-by: NMahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
Reported-by: NNico Golde <nico@ngolde.de>
Reported-by: NFabian Yamaguchi <fabs@goesec.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Register generic netlink multicast groups as an array with
the family and give them contiguous group IDs. Then instead
of passing the global group ID to the various functions that
send messages, pass the ID relative to the family - for most
families that's just 0 because the only have one group.

This avoids the list_head and ID in each group, adding a new
field for the mcast group ID offset to the family.

At the same time, this allows us to prevent abusing groups
again like the quota and dropmon code did, since we can now
check that a family only uses a group it owns.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This doesn't really change anything, but prepares for the
next patch that will change the APIs to pass the group ID
within the family, rather than the global group ID.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As suggested by David Miller, make genl_register_family_with_ops()
a macro and pass only the array, evaluating ARRAY_SIZE() in the
macro, this is a little safer.

The openvswitch has some indirection, assing ops/n_ops directly in
that code. This might ultimately just assign the pointers in the
family initializations, saving the struct genl_family_and_ops and
code (once mcast groups are handled differently.)
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes crashes when handling atif events due to the lack of a
callback being registered.
Signed-off-by: NSamuel Li <samuel.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

init_card() calls dev_get_by_name() to get a network deceive. But it
doesn't decrease network device reference count after the device is
used.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit bd950799 (PCI: acpiphp: Convert to dynamic debug) removed users
of acpiphp_debug variable and the variable itself but the declaration was
left in the header file. Drop this unused declaration.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>