Not all revisions have all the clocks so get the necessary clocks
based on hardware revision.

This should avoid un-necessary clk_get failure messages that were
observed earlier.

Also remove the dummy USB host clocks from the OMAP3 clock data.
These are no longer expected by the driver.

Acked-by: Mike Turquette <mturquette@linaro.org> [OMAP3 CLK data]
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

dpll4_m3_ck and dpll4_m4_ck have divider bit fields which are 6 bits
wide. However, only values from 1 to 32 are allowed. This means we have
to add a divider tables and list the dividers explicitly.

I believe the same issue is there for other dpll4_mx_ck clocks, but as
I'm not familiar with them, I didn't touch them.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Set CLK_SET_RATE_PARENT flag for dss1_alwon_fck_3430es2,
dss1_alwon_fck_3430es1 and dpll4_m4x2_ck so that the DSS's fclk can be
configured without the need to get the parent's parent of the fclk.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Adding this driver as platform device and only for RX-51 until somebody test if
it working also on other OMAP3 HS devices and until there will be generic ARM
way to deal with SMC calls.
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
[tony@atomide.com: folded in the clock alias change]
Signed-off-by: NTony Lindgren <tony@atomide.com>

We don't need multiple aliases for the OMAP USB host clocks and neither
the dummy clocks so remove them.

CC: Paul Walmsley <paul@pwsan.com>
CC: Rajendra Nayak <rnayak@ti.com>
CC: Benoit Cousson <b-cousson@ti.com>
CC: Mike Turquette <mturquette@linaro.com>
Signed-off-by: NRoger Quadros <rogerq@ti.com>
[paul@pwsan.com: updated against v3.10-rc4]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Convert the device data for the OMAP3 AES crypto IP
from explicit platform_data to hwmod.

CC: Paul Walmsley <paul@pwsan.com>
Signed-off-by: NMark A. Greer <mgreer@animalcreek.com>
[paul@pwsan.com: fixed lines causing sparse warnings]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Convert the device data for the OMAP3 SHAM2 (SHA1/MD5) crypto IP
from explicit platform_data to hwmod.

CC: Paul Walmsley <paul@pwsan.com>
Signed-off-by: NMark A. Greer <mgreer@animalcreek.com>
[paul@pwsan.com: updated to use per-SoC registration lists for GP-only hwmods;
 fixed lines causing sparse warnings]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

The patch removes all the CK_* which were used to identify the family of
processors for which the individual clocks belonged to. Instead now separate
lists are created based on the family of processors.

Boot Tested on: OMAP4430, OMAP4460, Beagle-board, AM33X boards, OMAP2 boards.
Signed-off-by: NJ Keerthy <j-keerthy@ti.com>
Tested-by: NVaibhav Bedia <vaibhav.bedia@ti.com>
Tested-by: NJon Hunter <jon-hunter@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
[paul@pwsan.com: changed omap_clock_register_links() to omap_clocks_register();
 updated to apply]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

The cam_mclk clock is generated through the following clocks chain:

dpll4 -> dpll4_m5 -> dpll4_m5x2 -> cam_mclk

As dpll4_m5 and dpll4_m5x2 do not driver any clock other than cam_mclk,
back-propagate the cam_clk rate changes up to dpll4_m5.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NMike Turquette <mturquette@linaro.org>
Acked-by: NSakari Ailus <sakari.ailus@iki.fi>
Tested-by: NSakari Ailus <sakari.ailus@iki.fi>

The ETM/ETB drivers for OMAP3, enable the emu_src_ck clock in order
to access the ETM/ETB hardware. The emu_src_ck should enable the EMU
clock domain so that the ETM/ETB hardware is accessible. However,
currently when enabling the emu_src_ck the EMU clock domain is not
being enabled and so the ETM/ETB drivers are failing. Add enable/disable
clock functions to enable the EMU clock domain when enabling the
emu_src_ck.
Signed-off-by: NJon Hunter <jon-hunter@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

The patch is the output from a python script which converts
from the old OMAP clk format to COMMON clk format using a
JSON parser in between which was developed by Paul Walmsley.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: AM3517/05: dropped bogus hsotgusb "ick" and "fck"
 clkdev aliases; added hsotgusb_fck alias; added emac_ick and emac_fck
 aliases; replace omap2_init_clksel_parent() with
 omap2_clksel_find_parent_index(); reflow macros and parent name
 lists; add clkdm_name argument to DEFINE_STRUCT_CLK_HW_OMAP macros]
Signed-off-by: NMike Turquette <mturquette@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>