Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

With the PCMCIA ioctl being the only remaining user of
_get_configuration_info, move the function to pcmcia_ioctl.c
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Remove the three remaining pcmcia_get_configuration_info() users:
- pcmciamtd is marked broken anyway.
- serial_cs.c can access the relevant structs directly
- ipwireless didn't use the output

CC: linux-serial@vger.kernel.org
CC: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

* pcmcia-config-loop:
  pcmcia: pcmcia_config_loop() improvement by passing vcc
  pcmcia: pcmcia_config_loop() default CIS entry handling
  pcmcia: pcmcia_config_loop() ConfigIndex unification
  pcmcia: use pcmcia_loop_config in misc pcmcia drivers
  pcmcia: use pcmcia_loop_config in net pcmcia drivers
  pcmcia: use pcmcia_loop_config in ISDN pcmcia drivers
  pcmcia: use pcmcia_loop_config in scsi pcmcia drivers
  pcmcia: use pcmcia_loop_config in bluetooth drivers
  pcmcia: use pcmcia_loop_config in pata and ide drivers
  pcmcia: add pcmcia_loop_config() helper

* pcmcia-printk:
  pcmcia: don't add extra DEBUG cflag
  pcmcia: remove unused cs_socket_name() definition
  pcmcia: use dev_printk in module rsrc_nonstatic
  pcmcia: use dev_printk in module pcmcia
  pcmcia: use dev_printk in module pcmcia_core
  pcmcia: use dev_printk and dev_dbg in yenta_socket

Use CONFIG_PCMCIA_DEBUG instead of DEBUG so that dev_dbg() and other tricks
work properly.

(includes bugfixes from and
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
)
Signed-off-by: NDominik Broodwski <linux@dominikbrodowski.net>

Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

(includes bugfix from and
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
)
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

By passing the current Vcc setting to the pcmcia_config_loop callback
function, we can remove pcmcia_get_configuration_info() calls from many
drivers.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Many drivers use the default CIS entry within their pcmcia_config_loop()
callback function. Therefore, factor the default CIS entry handling out.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Almost all drivers set p_dev->conf.ConfigIndex to cfg->index in
the pcmcia_config_loop() callback function. Therefore, factor it out.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Use the config loop helper in misc pcmcia drivers.

CC: Harald Welte <laforge@gnumonks.org>
CC: <linux-parport@lists.infradead.org>
CC: Russell King <rmk+kernel@arm.linux.org.uk>
CC: Ed Okerson <eokerson@quicknet.net>
CC: linux-serial@vger.kernel.org
CC: boti@rocketmail.com
CC: linux-usb@vger.kernel.org
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Use the config loop helper in (some) net pcmcia drivers.

CC: netdev@vger.kernel.org
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Use the config loop helper in ISDN pcmcia drivers.

CC: Karsten Keil <kkeil@suse.de>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Use the config loop helper in scsi pcmcia drivers.

CC: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
CC: linux-scsi@vger.kernel.org
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Use the config loop helper in bluetooth pcmcia drivers.

CC: Marcel Holtmann <marcel@holtmann.org>
CC: linux-bluetooth@vger.kernel.org
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Use the config loop helper in pata_pcmcia and ide_cs

CC: Tejun Heo <htejun@gmail.com>
CC: Alan Cox <alan@lxorguk.ukuu.org.uk>
CC: linux-ide@vger.kernel.org
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

By calling pcmcia_loop_config(), a pcmcia driver can iterate over all
available configuration options. During a driver's probe() phase, one
doesn't need to use pcmcia_get_{first,next}_tuple, pcmcia_get_tuple_data
and pcmcia_parse_tuple directly in most if not all cases.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Over time, a few differences have accumulated between pata_pcmcia
and ide-cs. Fix those.

CC: linux-ide@vger.kernel.org
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Instead of copying CIS override data in socket_sysfs.c or ds.c, and then again
in cistpl.c, only do so once. Also, cisdump_t is now only used by the
deprecated ioctl.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  lguest: turn Waker into a thread, not a process
  lguest: Enlarge virtio rings
  lguest: Use GSO/IFF_VNET_HDR extensions on tun/tap
  lguest: Remove 'network: no dma buffer!' warning
  lguest: Adaptive timeout
  lguest: Tell Guest net not to notify us on every packet xmit
  lguest: net block unneeded receive queue update notifications
  lguest: wrap last_avail accesses.
  lguest: use cpu capability accessors
  lguest: virtio-rng support
  lguest: Support assigning a MAC address
  lguest: Don't leak /dev/zero fd
  lguest: fix verbose printing of device features.
  lguest: fix switcher_page leak on unload
  lguest: Guest int3 fix
  lguest: set max_pfn_mapped, growl loudly at Yinghai Lu

* 'for-linus' of git://git.o-hand.com/linux-mfd:
  mfd: accept pure device as a parent, not only platform_device
  mfd: add platform_data to mfd_cell
  mfd: Coding style fixes
  mfd: Use to_platform_device instead of container_of

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (21 commits)
  x86/PCI: use dev_printk when possible
  PCI: add D3 power state avoidance quirk
  PCI: fix bogus "'device' may be used uninitialized" warning in pci_slot
  PCI: add an option to allow ASPM enabled forcibly
  PCI: disable ASPM on pre-1.1 PCIe devices
  PCI: disable ASPM per ACPI FADT setting
  PCI MSI: Don't disable MSIs if the mask bit isn't supported
  PCI: handle 64-bit resources better on 32-bit machines
  PCI: rewrite PCI BAR reading code
  PCI: document pci_target_state
  PCI hotplug: fix typo in pcie hotplug output
  x86 gart: replace to_pages macro with iommu_num_pages
  x86, AMD IOMMU: replace to_pages macro with iommu_num_pages
  iommu: add iommu_num_pages helper function
  dma-coherent: add documentation to new interfaces
  Cris: convert to using generic dma-coherent mem allocator
  Sh: use generic per-device coherent dma allocator
  ARM: support generic per-device coherent dma mem
  Generic dma-coherent: fix DMA_MEMORY_EXCLUSIVE
  x86: use generic per-device dma coherent allocator
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] qla2xxx: fix msleep compile error

Alexey Dobriyan reported trouble with LTP with the new fast-gup code,
and Johannes Weiner debugged it to non-page-aligned addresses, where the
new get_user_pages_fast() code would do all the wrong things, including
just traversing past the end of the requested area due to 'addr' never
matching 'end' exactly.

This is not a pretty fix, and we may actually want to move the alignment
into generic code, leaving just the core code per-arch, but Alexey
verified that the vmsplice01 LTP test doesn't crash with this.
Reported-and-tested-by: NAlexey Dobriyan <adobriyan@gmail.com>
Debugged-by: NJohannes Weiner <hannes@saeurebad.de>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

lguest uses a Waker process to break it out of the kernel (ie.
actually running the guest) when file descriptor needs attention.

Changing this from a process to a thread somewhat simplifies things:
it can directly access the fd_set of things to watch.  More
importantly, it means that the Waker can see Guest memory correctly,
so /dev/vring file descriptors will work as anticipated (the
alternative is to actually mmap MAP_SHARED, but you can't do that with
/dev/zero).
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

With big packets, 128 entries is a little small.

Guest -> Host 1GB TCP:
Before: 8.43625 seconds xmit 95640 recv 198266 timeout 49771 usec 1252
After: 8.01099 seconds xmit 49200 recv 102263 timeout 26014 usec 2118
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Guest -> Host 1GB TCP:
Before 20.1974 seconds xmit 214510 recv 5 timeout 214491 usec 278
After 8.43625 seconds xmit 95640 recv 198266 timeout 49771 usec 1252

Host -> Guest 1GB TCP:
Before: Seconds 9.98854 xmit 172166 recv 5344 timeout 172157 usec 251
After: Seconds 5.72803 xmit 244322 recv 9919 timeout 244302 usec 156
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

This warning can happen a lot under load, and it should be warnx not
warn anwyay.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Since the correct timeout value varies, use a heuristic which adjusts
the timeout depending on how many packets we've seen.  This gives
slightly worse results, but doesn't need tweaking when GSO is
introduced.

500 usec	19.1887		xmit 561141 recv 1 timeout 559657
Dynamic (278)	20.1974		xmit 214510 recv 5 timeout 214491 usec 278
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

virtio_ring has the ability to suppress notifications.  This prevents
a guest exit for every packet, but we need to set a timer on packet
receipt to re-check if there were any remaining packets.

Here are the times for 1G TCP Guest->Host with different timeout
settings (it matters because the TCP window doesn't grow big enough to
fill the entire buffer):

Timeout value	Seconds		Xmit/Recv/Timeout
None (before)	25.3784		xmit 7750233 recv 1
2500 usec	62.5119		xmit 207020 recv 2 timeout 207020
1000 usec	34.5379		xmit 207003 recv 2 timeout 207003
750 usec	29.2305		xmit 207002 recv 1 timeout 207002
500 usec	19.1887		xmit 561141 recv 1 timeout 559657
250 usec	20.0465		xmit 214128 recv 2 timeout 214110
100 usec	19.2583		xmit 561621 recv 1 timeout 560153

(Note that these values are sensitive to the GSO patches which come
 later, and probably other traffic-related variables, so take with a
 large grain of salt).
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Number of exits transmitting 10GB Guest->Host before:
	network xmit 7858610 recv 118136

After:
	network xmit 7750233 recv 1
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

To simplify the transition to when we publish indices in the ring
(and make shuffling my patch queue easier), wrap them in a lg_last_avail()
macro.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

To support my little make-x86-bitops-use-proper-typechecking projectlet.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrea Arcangeli <andrea@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

This is a simple patch to add support for the virtio "hardware random
generator" to lguest.  It gets about 1.2 MB/sec reading from /dev/hwrng
in the guest.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

If you've got a nice DHCP configuration which maps MAC
addresses to specific IP addresses, then you're going to
want to start your guest with one of those MAC addresses.

Also, in Fedora, we have persistent network interface naming
based on the MAC address, so with randomly assigned
addresses you're soon going to hit eth13. Who knows what
will happen then!

Allow assigning a MAC address to the network interface with
e.g.

  --tunnet=bridge:eth0:00:FF:95:6B:DA:3D

or:

  --tunnet=192.168.121.1:00:FF:95:6B:DA:3D

which is pretty unintelligable, but ...

(includes Rusty's minor rework)
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>