- 21 2月, 2012 15 次提交
-
-
由 H. Peter Anvin 提交于
Allow an x32 process to be started. Originally-by: NH. J. Lu <hjl.tools@gmail.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
-
由 H. Peter Anvin 提交于
Unfortunately a lot of the compat types are guarded with CONFIG_COMPAT or the equivalent, so add a similar guard to <asm/sys_ia32.h> to avoid compilation failures when CONFIG_COMPAT=n. Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 H. Peter Anvin 提交于
x32 shares most system calls with x86-64, but unfortunately some subsystem (the input subsystem is the chief offender) which require is_compat() when operating with a 32-bit userspace. The input system actually has text files in sysfs whose meaning is dependent on sizeof(long) in userspace! We could solve this by having two completely disjoint system call tables; requiring that each system call be duplicated. This patch takes a different approach: we add a flag to the system call number; this flag doesn't affect the system call dispatch but requests compat treatment from affected subsystems for the duration of the system call. The change of cmpq to cmpl is safe since it immediately follows the and. Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 H. Peter Anvin 提交于
Add rt_sigframe_x32 to <asm/sigframe.h>. Unfortunately we can't just define all the data structures unconditionally, due to the #ifdef CONFIG_COMPAT in <linux/compat.h> and its trickle-down effects, hence the #ifdef mess. Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 H. J. Lu 提交于
Add a definition for struct ucontext_x32; this is inherently a mix of the 32- and 64-bit versions. Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 H. Peter Anvin 提交于
Export setup_sigcontext() and restore_sigcontext() from signal.c, so we can use the 64-bit versions verbatim for x32. Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 H. Peter Anvin 提交于
There are some definitions which are duplicated between kernel/signal.c and ia32/ia32_signal.c; move them to a common header file. Rather than adding stuff to existing header files which contain data structures, create a new header file; hence the slightly odd name ("all the good ones were taken.") Note: nothing relied on signal_fault() being defined in <asm/ptrace.h>. Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 H. Peter Anvin 提交于
Generate macros for the *kernel* code to use to refer to x32 system calls. These have an __NR_x32_ prefix and do not include __X32_SYSCALL_BIT. Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 H. Peter Anvin 提交于
Generate <asm/unistd_x32.h>; this exports x32 system call numbers to user space. [ v2: Enclose all arguments to syshdr in '' so empty arguments aren't dropped on the floor. ] Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 H. Peter Anvin 提交于
On x86, the only difference between sys_rt_sigprocmask and sys32_rt_sigprocmask is the alignment of the data structures. However, x86 allows data accesses with arbitrary alignment, and therefore there is no reason for this code to be different. Reported-by: NGregory M. Lueck <gregory.m.lueck@intel.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 H. Peter Anvin 提交于
An x32 process is *almost* the same thing as a 64-bit process with a 32-bit address limit, but there are a few minor differences -- in particular core dumps are 32 bits and signal handling is different. Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 H. J. Lu 提交于
So far this has only been used in process_64.c, but the x32 code will need it in additional code. Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 H. Peter Anvin 提交于
This is the same as the 64-bit posix_types.h, except that __kernel_[u]long_t is defined to be [unsigned] long long and therefore 64 bits. Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 H. Peter Anvin 提交于
Use explicit sizes (__u64) instead of implicit sizes (unsigned long) in the definition for sigcontext.h; this will allow this structure to be shared between the x86-64 native ABI and the x32 ABI. Originally-by: NH. J. Lu <hjl.tools@gmail.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/n/tip-4pr1xnnksprt7t0h3w5fw4rv@git.kernel.org
-
由 H. Peter Anvin 提交于
Factor out IA32 (compatibility instruction set) from 32-bit address space in the thread_info flags; this is a precondition patch for x32 support. Originally-by: NH. J. Lu <hjl.tools@gmail.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/n/tip-4pr1xnnksprt7t0h3w5fw4rv@git.kernel.org
-
- 15 2月, 2012 1 次提交
-
-
由 H. Peter Anvin 提交于
Change the x86 architecture to use <asm-generic/posix_types.h>. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/1328677745-20121-20-git-send-email-hpa@zytor.com Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de>
-
- 01 2月, 2012 2 次提交
-
-
由 Stephan Bärwolf 提交于
On hosts without this patch, 32bit guests will crash (and 64bit guests may behave in a wrong way) for example by simply executing following nasm-demo-application: [bits 32] global _start SECTION .text _start: syscall (I tested it with winxp and linux - both always crashed) Disassembly of section .text: 00000000 <_start>: 0: 0f 05 syscall The reason seems a missing "invalid opcode"-trap (int6) for the syscall opcode "0f05", which is not available on Intel CPUs within non-longmodes, as also on some AMD CPUs within legacy-mode. (depending on CPU vendor, MSR_EFER and cpuid) Because previous mentioned OSs may not engage corresponding syscall target-registers (STAR, LSTAR, CSTAR), they remain NULL and (non trapping) syscalls are leading to multiple faults and finally crashs. Depending on the architecture (AMD or Intel) pretended by guests, various checks according to vendor's documentation are implemented to overcome the current issue and behave like the CPUs physical counterparts. [mtosatti: cleanup/beautify code] Signed-off-by: NStephan Baerwolf <stephan.baerwolf@tu-ilmenau.de> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Stephan Bärwolf 提交于
In order to be able to proceed checks on CPU-specific properties within the emulator, function "get_cpuid" is introduced. With "get_cpuid" it is possible to virtually call the guests "cpuid"-opcode without changing the VM's context. [mtosatti: cleanup/beautify code] Signed-off-by: NStephan Baerwolf <stephan.baerwolf@tu-ilmenau.de> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 27 1月, 2012 1 次提交
-
-
由 Jan Beulich 提交于
Quite oddly, all of the arguments passed through from the top level macros to the second level which didn't need parentheses had them, while the only expression (involving a parameter) needing them didn't. Very recently I got bitten by the lack thereof when using something like "array + index" for the first operand, with "array" being an array more narrow than int. Signed-off-by: NJan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/4F2183A9020000780006F3E6@nat28.tlf.novell.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 26 1月, 2012 2 次提交
-
-
由 Andreas Herrmann 提交于
That is the last one missing for those CPUs. Others were recently added with commits fb215366 (KVM: expose latest Intel cpu new features (BMI1/BMI2/FMA/AVX2) to guest) and commit 969df4b8 (x86: Report cpb and eff_freq_ro flags correctly) Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com> Link: http://lkml.kernel.org/r/20120120163823.GC24508@alberich.amd.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Russ Anderson 提交于
uv_gpa_to_soc_phys_ram() was inadvertently ignoring the shift values. This fix takes the shift into account. Signed-off-by: NRuss Anderson <rja@sgi.com> Cc: <stable@kernel.org> Link: http://lkml.kernel.org/r/20120119020753.GA7228@sgi.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 20 1月, 2012 1 次提交
-
-
由 H. Peter Anvin 提交于
In checkin 303395ac x86: Generate system call tables and unistd_*.h from tables the feature macros in <asm/unistd.h> were unified between 32 and 64 bits. Unfortunately 32 bits requires __ARCH_WANT_SYS_IPC and this was inadvertently dropped. Reported-by: NDmitry Kasatkin <dmitry.kasatkin@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/CALLzPKbeXN5gdngo8uYYU8mAow=XhrwBFBhKfG811f37BubQOg@mail.gmail.com
-
- 17 1月, 2012 4 次提交
-
-
由 Cliff Wickman 提交于
This patch adds separate accounting of UV2 message "strong nack's" in the BAU statistics. Signed-off-by: NCliff Wickman <cpw@sgi.com> Link: http://lkml.kernel.org/r/20120116212238.GF5767@sgi.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Cliff Wickman 提交于
This patch implements a workaround for a UV2 hardware bug. The bug is a non-atomic update of a memory-mapped register. When hardware message delivery and software message acknowledge occur simultaneously the pending message acknowledge for the arriving message may be lost. This causes the sender's message status to stay busy. Part of the workaround is to not acknowledge a completed message until it is verified that no other message is actually using the resource that is mistakenly recorded in the completed message. Part of the workaround is to test for long elapsed time in such a busy condition, then handle it by using a spare sending descriptor. The stay-busy condition is eventually timed out by hardware, and then the original sending descriptor can be re-used. Most of that logic change is in keeping track of the current descriptor and the state of the spares. The occurrences of the workaround are added to the BAU statistics. Signed-off-by: NCliff Wickman <cpw@sgi.com> Link: http://lkml.kernel.org/r/20120116211947.GC5767@sgi.com Cc: <stable@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Cliff Wickman 提交于
Update the use of the Broadcast Assist Unit on SGI Altix UV2 to the use of native UV2 mode on new hardware (not the legacy mode). UV2 native mode has a different format for a broadcast message. We also need quick differentiaton between UV1 and UV2. Signed-off-by: NCliff Wickman <cpw@sgi.com> Link: http://lkml.kernel.org/r/20120116211750.GA5767@sgi.com Cc: <stable@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Greg Kroah-Hartman 提交于
When suspending, there was a large list of warnings going something like: Device 'machinecheck1' does not have a release() function, it is broken and must be fixed This patch turns the static mce_devices into dynamically allocated, and properly frees them when they are removed from the system. It solves the warning messages on my laptop here. Reported-by: N"Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Reported-by: NLinus Torvalds <torvalds@linux-foundation.org> Tested-by: NDjalal Harouni <tixxdz@opendz.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@amd64.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 1月, 2012 1 次提交
-
-
由 Anton Vorontsov 提交于
This very noisy sparse warning appears on almost every file in the kernel: CHECK init/main.c arch/x86/include/asm/thread_info.h:43:55: error: dubious one-bit signed bitfield arch/x86/include/asm/thread_info.h:44:46: error: dubious one-bit signed bitfield Sparse is right and this patch changes sig_on_uaccess_error and uaccess_err flags to unsigned type and thus fixes the warning. Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com> Acked-by: NAndy Lutomirski <luto@mit.edu> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Dan Carpenter <error27@gmail.com> Link: http://lkml.kernel.org/r/20120111011146.GA30428@oksana.dev.rtsoft.ruSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 13 1月, 2012 1 次提交
-
-
由 Anton Vorontsov 提交于
This very noisy sparse warning appears on almost every file in the kernel: CHECK init/main.c arch/x86/include/asm/thread_info.h:43:55: error: dubious one-bit signed bitfield arch/x86/include/asm/thread_info.h:44:46: error: dubious one-bit signed bitfield This patch changes sig_on_uaccess_error and uaccess_err flags to unsigned type and thus fixes the warning. Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com> Acked-by: NAndy Lutomirski <luto@mit.edu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 1月, 2012 1 次提交
-
-
由 H. Peter Anvin 提交于
atomic64_read() doesn't actually write anything (as far as the C environment is concerned... the CPU does actually write but that's an implementation quirk), so it should take a const pointer. This does NOT mean that it is safe to use atomic64_read() on an object in readonly storage (it will trap!) Reported-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/20120109165859.1879abda.akpm@linux-foundation.org
-
- 08 1月, 2012 1 次提交
-
-
由 H. Peter Anvin 提交于
This reverts commit d5e553d6, which caused large numbers of build warnings on PowerPC. This moves the #include <asm/asm-offsets.h> to <asm/syscall.h>, which makes some kind of sense since NR_syscalls is syscalls related. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/20111214181545.6e13bc954cb7ddce9086e861@canb.auug.org.au
-
- 07 1月, 2012 4 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
The MSI restore function will become a function pointer in an x86_msi_ops struct. It defaults to the implementation in the io_apic.c and msi.c. We piggyback on the indirection mechanism introduced by "x86: Introduce x86_msi_ops". Cc: x86@kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: linux-pci@vger.kernel.org Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Bjorn Helgaas 提交于
This factors out the AMD native MMCONFIG discovery so we can use it outside amd_bus.c. amd_bus.c reads AMD MSRs so it can remove the MMCONFIG area from the PCI resources. We may also need the MMCONFIG information to work around BIOS defects in the ACPI MCFG table. Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: stable@kernel.org # 2.6.34+ Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Bjorn Helgaas 提交于
x86 has two kinds of PCI root bus scanning: (1) ACPI-based, using _CRS resources. This used pci_create_bus(), not pci_scan_bus(), because ACPI hotplug needed to split the pci_bus_add_devices() into a separate host bridge .start() method. This patch parses the _CRS resources earlier, so we can build a list of resources and pass it to pci_create_root_bus(). Note that as before, we parse the _CRS even if we aren't going to use it so we can print it for debugging purposes. (2) All other, which used either default resources (ioport_resource and iomem_resource) or information read from the hardware via amd_bus.c or similar. This used pci_scan_bus(). This patch converts x86_pci_root_bus_res_quirks() (previously called from pcibios_fixup_bus()) to x86_pci_root_bus_resources(), which builds a list of resources before we call pci_scan_root_bus(). We also use x86_pci_root_bus_resources() if we have ACPI but are ignoring _CRS. CC: Yinghai Lu <yinghai.lu@oracle.com> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Myron Stowe 提交于
The 'latency timer' of PCI devices, both Type 0 and Type 1, is setup in architecture-specific code [see: 'pcibios_set_master()']. There are two approaches being taken by all the architectures - check if the 'latency timer' is currently set between 16 and 255 and if not bring it within bounds, or, do nothing (and then there is the gratuitously different PA-RISC implementation). There is nothing architecture-specific about PCI's 'latency timer' so this patch pulls its setup functionality up into the PCI core by creating a generic 'pcibios_set_master()' function using the '__weak' attribute which can be used by all architectures as a default which, if necessary, can then be over-ridden by architecture-specific code. No functional change. Signed-off-by: NMyron Stowe <myron.stowe@redhat.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 04 1月, 2012 2 次提交
-
-
由 Eric Dumazet 提交于
It appears about all functions in arch/x86/lib/atomic64_cx8_32.S are wrong in case cmpxchg8b must be restarted, because LOCK_PREFIX macro defines a label "1" clashing with other local labels : 1: some_instructions LOCK_PREFIX cmpxchg8b (%ebp) jne 1b / jumps to beginning of LOCK_PREFIX ! A possible fix is to use a magic label "672" in LOCK_PREFIX asm definition, similar to the "671" one we defined in LOCK_PREFIX_HERE. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NJan Beulich <JBeulich@suse.com> Cc: Christoph Lameter <cl@linux.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1325608540.2320.103.camel@edumazet-HP-Compaq-6005-Pro-SFF-PCSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jan Beulich 提交于
Just like the per-CPU ones they had several problems/shortcomings: Only the first memory operand was mentioned in the asm() operands, and the 2x64-bit version didn't have a memory clobber while the 2x32-bit one did. The former allowed the compiler to not recognize the need to re-load the data in case it had it cached in some register, while the latter was overly destructive. The types of the local copies of the old and new values were incorrect (the types of the pointed-to variables should be used here, to make sure the respective old/new variable types are compatible). The __dummy/__junk variables were pointless, given that local copies of the inputs already existed (and can hence be used for discarded outputs). The 32-bit variant of cmpxchg_double_local() referenced cmpxchg16b_local(). At once also: - change the return value type to what it really is: 'bool' - unify 32- and 64-bit variants - abstract out the common part of the 'normal' and 'local' variants Signed-off-by: NJan Beulich <jbeulich@suse.com> Cc: Christoph Lameter <cl@linux.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/4F01F12A020000780006A19B@nat28.tlf.novell.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 27 12月, 2011 4 次提交
-
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Add a helper function that emulates the RDPMC instruction operation. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
Use perf_events to emulate an architectural PMU, version 2. Based on PMU version 1 emulation by Avi Kivity. [avi: adjust for cpuid.c] [jan: fix anonymous field initialization for older gcc] Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Move the mmu code in kvm_arch_vcpu_init() to kvm_mmu_create() Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-