Some NICs (3c905B) can not generate PME in power state PCI_D0, while others
like 3c905C can.  Call pci_enable_wake() with PCI_D3hot should give proper
WOL for 3c905B.
Signed-off-by: NSteffen Klassert <klassert@mathematik.tu-chemnitz.de>
Tested-by: NHarry Coin <hcoin@n4comm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

version update
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Add a debugfs interface to look at internal ring state.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Add ability to read/write EEPROM
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Use internal stats structure
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Change how PHY is managed on SysKonnect fibre based boards.
Poll for PHY coming up 1 per second, but use interrupt to detect loss.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Rather than bring network down/up when changing MTU,
only need to impact receiver.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This fixes problems with transmit hangs on older fiber based SysKonnect boards.

Adjust ram buffer sizing calculation to make it correct on all boards
and make it like the code in sky2 driver.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NLi Yang <leoli@freescale.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

net: Fix new EMAC driver for NAPI changes

This fixes the new EMAC driver for the NAPI updates. The previous patch
by Roland Dreier (already applied) to do that doesn't actually work. This
applies on top of it makes it work on my test Ebony machine.

This patch depends on "net: Add __napi_sycnhronize() to sync with napi poll"
posted previously.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

	Two small fixes to IPoIB support for bonding:

	1- copy header_ops from slave to bonding for IPoIB slaves
	2- move release and destroy logic to UNREGISTER from GOING_DOWN
	   notifier to avoid double release

	Set bonding to version 3.2.1.

Signed-off-by: Moni Shoua <monis at voltaire.com>
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Apparently poking the link status registers when autonegotiation
is running on the PHY might botch the PHY link on 80003es2lan
devices. While this is a very rare condition we can completely
avoid it alltogether by just using the MAC link bits to provide
the proper information to ethtool.
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Spotted by the Coverity checker.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Spotted by Joe Perches.
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The xl_laa array is just 6 bytes long, so we should substract
10 from the index, like is also done some lines above already.
Signed-Off-By: NMarcus Meissner <meissner@suse.de>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

A copy of struct net_device_stats now lives in struct net_device,
making in-driver copies a waste of memory.
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

main change:
* greatly improve per-NIC probe diagnostic output.  Similar to other
  net drivers, print out MAC address, PHY info, and various hardware and
  software flags that may be relevant.

other changes:
* similar to other net drivers, only print the initial version message
  when we have found at least one board.

* don't bother to print error message when pci_enable_device() fails,
  it will do so for us.

* use dev_printk() rather than printk() in nv_probe().  This gives
  use a standardized output similar to the rest of the kernel, and
  eliminates the need to manually print out PCI bus id.

* use DRV_NAME constant where appropriate

* clean struct pci_driver indentation
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

fix the forcedeth NAPI poll function to not emit this warning:

[  186.635916] WARNING: at net/core/dev.c:2166 net_rx_action()
[  186.641351]  [<c060d9f5>] net_rx_action+0x145/0x1b0
[  186.646191]  [<c011d752>] __do_softirq+0x42/0x90
[  186.650784]  [<c011d7c6>] do_softirq+0x26/0x30
[  186.655202]  [<c011db48>] local_bh_enable+0x48/0xa0
[  186.660055]  [<c06023e0>] lock_sock_nested+0xa0/0xc0
[  186.664995]  [<c065da16>] tcp_recvmsg+0x16/0xbc0
[  186.669588]  [<c013e94b>] __generic_file_aio_write_nolock+0x27b/0x520
[  186.676001]  [<c0601d75>] sock_common_recvmsg+0x45/0x70
[  186.681202]  [<c05ff5df>] sock_aio_read+0x11f/0x140
[  186.686054]  [<c015c086>] do_sync_read+0xc6/0x110
[  186.690735]  [<c012b9b0>] autoremove_wake_function+0x0/0x40
[  186.696280]  [<c060dcfc>] net_tx_action+0x3c/0xe0
[  186.700961]  [<c015c9c2>] vfs_read+0x132/0x140
[  186.705378]  [<c015cd41>] sys_read+0x41/0x70
[  186.709625]  [<c0102b66>] sysenter_past_esp+0x5f/0x89
[  186.714651]  =======================
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: (33 commits)
  amd74xx: remove /proc/ide/amd74xx
  amd74xx/via82cxxx: don't initialize drive->dn
  sis5513: remove /proc/ide/sis
  ide: remove CONFIG_IDEDMA_ONLYDISK
  ide: add "hdx=nodma" kernel parameter
  ide: remove hwif->autodma and drive->autodma
  ide: remove "idex=dma" kernel parameter
  ide: remove CONFIG_BLK_DEV_IDEDMA_FORCED
  ide: use PCI_VDEVICE() macro
  sis5513: clear prefetch and postwrite for ATAPI devices
  it8213/piix/slc90e66: "de-couple" PIO and UDMA modes
  ide: unexport noautodma
  ide: unexport ide_tune_dma
  ide: remove ->ide_dma_check (take 2)
  ide-pmac: add PIO autotune fallback to ->ide_dma_check
  ide-cris: add PIO autotune fallback to ->ide_dma_check
  sl82c105: add PIO autotune fallback to ->ide_dma_check
  cs5530/sc1200: add PIO autotune fallback to ->ide_dma_check
  ide: remove ide_use_fast_pio()
  ide: remove drive->init_speed zeroing
  ...

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  SELinux: kills warnings in Improve SELinux performance when AVC misses
  SELinux: improve performance when AVC misses.
  SELinux: policy selectable handling of unknown classes and perms
  SELinux: Improve read/write performance
  SELinux: tune avtab to reduce memory usage

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (25 commits)
  firewire: fw-cdev: reorder wakeup vs. spinlock
  firewire: in-code doc updates.
  firewire: a header cleanup
  firewire: adopt read cycle timer ABI from raw1394
  firewire: fw-ohci: check for misconfigured bus (phyID == 63)
  firewire: fw-ohci: missing dma_unmap_single
  firewire: fw-ohci: log posted write errors
  firewire: fw-ohci: reorder includes
  firewire: fw-ohci: fix includes
  firewire: fw-ohci: enforce read order for selfID generation
  firewire: fw-sbp2: use an own workqueue (fix system responsiveness)
  firewire: fw-sbp2: expose module parameter for workarounds
  firewire: fw-sbp2: add support for multiple logical units per target
  firewire: fw-sbp2: always enable IRQs before calling command ORB callback
  firewire: fw-core: local variable shadows a global one
  firewire: optimize fw_core_add_address_handler
  ieee1394: ieee1394_core.c: use DEFINE_SPINLOCK for spinlock definition
  ieee1394: csr1212: proper refcounting
  ieee1394: nodemgr: fix leak of struct csr1212_keyval
  ieee1394: pcilynx: I2C cleanups
  ...

* ssh://master.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
  x86: fix boot error introduced by kbuild

* 'release' of ssh://master.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Fix build for CONFIG_SMP=n

This patch kills ugly warnings when the "Improve SELinux performance
when ACV misses" patch.
Signed-off-by: NKaiGai Kohei <kaigai@ak.jp.nec.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

* We add ebitmap_for_each_positive_bit() which enables to walk on
  any positive bit on the given ebitmap, to improve its performance
  using common bit-operations defined in linux/bitops.h.
  In the previous version, this logic was implemented using a combination
  of ebitmap_for_each_bit() and ebitmap_node_get_bit(), but is was worse
  in performance aspect.
  This logic is most frequestly used to compute a new AVC entry,
  so this patch can improve SELinux performance when AVC misses are happen.
* struct ebitmap_node is redefined as an array of "unsigned long", to get
  suitable for using find_next_bit() which is fasted than iteration of
  shift and logical operation, and to maximize memory usage allocated
  from general purpose slab.
* Any ebitmap_for_each_bit() are repleced by the new implementation
  in ss/service.c and ss/mls.c. Some of related implementation are
  changed, however, there is no incompatibility with the previous
  version.
* The width of any new line are less or equal than 80-chars.

The following benchmark shows the effect of this patch, when we
access many files which have different security context one after
another. The number is more than /selinux/avc/cache_threshold, so
any access always causes AVC misses.

      selinux-2.6      selinux-2.6-ebitmap
AVG:   22.763 [s]          8.750 [s]
STD:    0.265              0.019
------------------------------------------
1st:   22.558 [s]          8.786 [s]
2nd:   22.458 [s]          8.750 [s]
3rd:   22.478 [s]          8.754 [s]
4th:   22.724 [s]          8.745 [s]
5th:   22.918 [s]          8.748 [s]
6th:   22.905 [s]          8.764 [s]
7th:   23.238 [s]          8.726 [s]
8th:   22.822 [s]          8.729 [s]
Signed-off-by: NKaiGai Kohei <kaigai@ak.jp.nec.com>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

Allow policy to select, in much the same way as it selects MLS support, how
the kernel should handle access decisions which contain either unknown
classes or unknown permissions in known classes.  The three choices for the
policy flags are

0 - Deny unknown security access. (default)
2 - reject loading policy if it does not contain all definitions
4 - allow unknown security access

The policy's choice is exported through 2 booleans in
selinuxfs.  /selinux/deny_unknown and /selinux/reject_unknown.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

It reduces the selinux overhead on read/write by only revalidating
permissions in selinux_file_permission if the task or inode labels have
changed or the policy has changed since the open-time check.  A new LSM
hook, security_dentry_open, is added to capture the necessary state at open
time to allow this optimization.

(see http://marc.info/?l=selinux&m=118972995207740&w=2)

Signed-off-by: Yuichi Nakamura<ynakam@hitachisoft.jp>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

This patch reduces memory usage of SELinux by tuning avtab. Number of hash
slots in avtab was 32768. Unused slots used memory when number of rules is
fewer. This patch decides number of hash slots dynamically based on number
of rules. (chain length)^2 is also printed out in avtab_hash_eval to see
standard deviation of avtab hash table.

Signed-off-by: Yuichi Nakamura<ynakam@hitachisoft.jp>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

Signed-off-by: NJay Fenlason <fenlason@redhat.com>

Prompted by https://bugzilla.redhat.com/show_bug.cgi?id=323411Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Signed-off-by: NYann Dirson <ydirson@altern.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (update)

fw_node() is not used (and not useful) outside fw-topology.c.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

This duplicates the read cycle timer feature of raw1394 (added in Linux
2.6.21) in firewire-core's userspace ABI.  The argument to the ioctl is
reordered though to ensure 32/64 bit compatibility.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NKristian Høgsberg <krh@redhat.com>

Check NodeID.nodeNumber as per OHCI 1.1 clause 7.2.3.2.  See also IEEE
1394a table 5B-1.

Also, demote the "node ID not valid" message from error to notification
as it is not an error condition.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

at_context_queue_packet() didn't clean up in an early exit path.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NKristian Høgsberg <krh@redhat.com>

Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Add used includes, remove unused includes.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

It seems unlikely, but access to self_id_cpu[0] could at least in theory
be deferred until after the loop over self_id_cpu[1..n] or even after
the subsequent reg_read.  Enforce the desired order by a read barrier.

Also prevent the reg_read from being reordered relative to the for loop.
This isn't necessary if the loop's conditional printk counts as an
implicit barrier, but better make it explicit.

(self_id_cpu[] is a coherent DMA buffer.)
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Firewire-sbp2 did very uncooperative things in the kernel's shared
workqueue:  Sleeping until reception of management status from the
target for up to 2 seconds, and performing SCSI inquiry and all of the
setup of SCSI command set drivers via scsi_add_device.  If there were
transient or permanent error conditions, this caused long blockage of
the kernel's events process, noticeable e.g. by blocked keyboard input.

We now allocate a workqueue process exclusive to fw-sbp2.  As a side
effect, this also increases parallelism of fw-sbp2's login and reconnect
work versus fw-core's device discovery and device update work which is
performed in the shared workqueue.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NKristian Høgsberg <krh@redhat.com>