pci_ari_enabled() is useful outside of drivers/pci, particularly for
deriving INTx routing via ACPI _PRT, so move it to the global header.
Also convert to bool return.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NDon Dutile <ddutile@redhat.com>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Marvell 9120 SATA controller has the same issue as a number of others, so
use the same quirk for this one.  The other quirks were added by
cc346a47 ("PCI: Add function 1 DMA alias quirk for Marvell devices").
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NAlex Williamson <alex.williamson@redhat.com>

Intel confirms that 9-series chipset root ports provide ACS-equivalent
isolation when configured via the existing Intel PCH ACS quirk setup.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NDon Dugger <donald.d.dugger@intel.com>

When we end I/O struct request with error, we need to pass
obj_request->length as @nr_bytes so that the entire obj_request worth
of bytes is completed.  Otherwise block layer ends up confused and we
trip on

    rbd_assert(more ^ (which == img_request->obj_request_count));

in rbd_img_obj_callback() due to more being true no matter what.  We
already do it in most cases but we are missing some, in particular
those where we don't even get a chance to submit any obj_requests, due
to an early -ENOMEM for example.

A number of obj_request->xferred assignments seem to be redundant but
I haven't touched any of obj_request->xferred stuff to keep this small
and isolated.

Cc: Alex Elder <elder@linaro.org>
Cc: stable@vger.kernel.org # 3.10+
Reported-by: NShawn Edwards <lesser.evil@gmail.com>
Reviewed-by: NSage Weil <sage@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

RGMII-ID uses an internal delay within the transmitter or receiver. This
feature is phy specific. The rest of the communication is normal RGMII.

So the fec driver has to check for all RGMII modes, not only
'PHY_INTERFACE_MODE_RGMII'.
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When system is out of memory, refilling of RX buffers fails while
the driver continue to pass the received packets to the kernel stack.
At some point, when all RX buffers deplete, driver may fall into a
sleep, and not recover when memory for new RX buffers is once again
availible. This is because hardware does not have valid descriptors,
so no interrupt will be generated for the driver to return to work
in napi context. Fix it by schedule the napi poll function from
stats_task delayed workqueue, as long as the allocations fail.
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While testing this driver with DEBUG_LOCKDEP and DEBUG_SPINLOCK
enabled did not produce any traces, it would be more prudent in the
case of tx_clean_lock to use spin_[un]lock_bh, since this lock is
manipulated in both the process and softirq contexts.

This patch was tested for functionality and regressions with netperf
and DEBUG_LOCKDEP and DEBUG_SPINLOCK enabled.
Signed-off-by: NTony Camuso <tcamuso@redhat.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Addresses the following kernel logs seen during boot:

Kernel unaligned access at TPC[100ee150] mlx4_QUERY_HCA+0x80/0x248 [mlx4_core]
Kernel unaligned access at TPC[100f071c] mlx4_QUERY_ADAPTER+0x100/0x12c [mlx4_core]
Kernel unaligned access at TPC[100f071c] mlx4_QUERY_ADAPTER+0x100/0x12c [mlx4_core]
Kernel unaligned access at TPC[100f071c] mlx4_QUERY_ADAPTER+0x100/0x12c [mlx4_core]
Kernel unaligned access at TPC[100f071c] mlx4_QUERY_ADAPTER+0x100/0x12c [mlx4_core]
Signed-off-by: NDavid Ahern <david.ahern@oracle.com>
Acked-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NBenjamin Poirier <bpoirier@suse.de>
Fixes: 9e311e77 ("net/mlx4_en: Use affinity hint")
Acked-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 02233342 ("dm: optimize dm_mq_queue_rq to _not_ use kthread if
using pure blk-mq") mistakenly removed free_rq_clone()'s clone->q check
before testing clone->q->mq_ops.  It was an oversight to discontinue
that check for 1 of the 2 use-cases for free_rq_clone():
1) free_rq_clone() called when an unmapped original request is requeued
2) free_rq_clone() called in the request-based IO completion path

The clone->q check made sense for case #1 but not for #2.  However, we
cannot just reinstate the check as it'd mask a serious bug in the IO
completion case #2 -- no in-flight request should have an uninitialized
request_queue (basic block layer refcounting _should_ ensure this).

The NULL pointer seen for case #1 is detailed here:
https://www.redhat.com/archives/dm-devel/2015-April/msg00160.html

Fix this free_rq_clone() NULL pointer by simply checking if the
mapped_device's type is DM_TYPE_MQ_REQUEST_BASED (clone's queue is
blk-mq) rather than checking clone->q->mq_ops.  This avoids the need to
dereference clone->q, but a WARN_ON_ONCE is added to let us know if an
uninitialized clone request is being completed.
Reported-by: NBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Commit bfebd1cd ("dm: add full blk-mq support to request-based DM")
didn't properly account for the need to short-circuit re-initializing
DM's blk-mq request_queue if it was already initialized.

Otherwise, reloading a blk-mq request-based DM table (either manually
or via multipathd) resulted in errors, see:
 https://www.redhat.com/archives/dm-devel/2015-April/msg00132.html

Fix is to only initialize the request_queue on the initial table load
(when the mapped_device type is assigned).

This is better than having dm_init_request_based_blk_mq_queue() return
early if the queue was already initialized because it elevates the
constraint to a more meaningful location in DM core.  As such the
pre-existing early return in dm_init_request_based_queue() can now be
removed.

Fixes: bfebd1cd ("dm: add full blk-mq support to request-based DM")
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Commit 6559a7e8 ("cxgb4: Cleanup macros so they follow the same
style and look consistent") introduced a regression where reading MC1
memory in adapters where MC0 isn't present or MC0 size is not equal to MC1
size caused the adapter to crash due to incorrect computation of memoffset.
Fix is to read the size of MC0 instead of MC1 for offset calculation
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In a kdump environment interfaces might be re-loaded without a proper
unload sequence in the previous running kernel.
bnx2x management FW and driver maintains a `pulse' that notifies the FW
that the driver is still up and running.

Driver load on the kdump kernel should be performed only after the pulse
has been out-of-sync long enough for the management FW to identify that
the driver has crashed, on which point it will perform some necessary
cleanup of the HW.

In today's distros kdump loading is quite fast, sometimes too fast for our
FW to get out-of-sync. This patch delays the bnx2x's probe during kdump
to allow a proper re-load on the kdump kernel.
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes a Kernel Panic in bonding driver debugfs file: rlb_hash_table.

$> modprobe bonding mode=6
$> cat /sys/kernel/debug/bonding/bond0/rlb_hash_table

This will crash the kernel. The struct alb_bond_info is initialized only when
the bonding interface is initialized (ip link set bond0 up) and not at the time
it is allocated. If we try to read the table before that, it'll result in a
kernel panic.

The patch applies against both net and net-next
Signed-off-by: NVishwanath Pai <vpai@akamai.com>
Signed-off-by: NAndy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Under heavy Rx load, observed that the Hw is updating the USED bit
and it is not updating the received frame status to the BD control
field. This could be lack of resources for processing the BDs at high
data rates. Driver drops the frame associated with this BD but not
clearing the USED bit. So, this is causing hang condition as Hw
expects USED bit to be cleared for this BD.
Signed-off-by: NPunnaiah Choudary Kalluri <punnaia@xilinx.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit b08cc791 eliminated memory
allocation in the packet send path:

    "hv_netvsc: Eliminate memory allocation in the packet send path

    The network protocol used to communicate with the host is the remote ndis (rndis)
    protocol. We need to decorate each outgoing packet with a rndis header and
    additional rndis state (rndis per-packet state). To manage this state, we
    currently allocate memory in the transmit path. Eliminate this allocation by
    requesting additional head room in the skb."

This commit introduced a bug since it did not account for the case if the skb
was cloned. Fix this bug.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Tested-by: NDexuan Cui <decui@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Altera TSE MAC rx DMA transfer starts with the 2 additional bytes for IP
payload alignment. This patch fixes tse_rx() function loop which reads DMA
rx status and extracts packet length from it. Status signalises a whole DMA
transfer length, which is 2 bytes longer than the packet itself.
Signed-off-by: NVlastimil Setka <setka@vsis.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

By default, the number of tx queues is limited by the number of online cpus
in mlx4_en_get_profile(). However, this limit no longer holds after the
ethtool .set_channels method has been called. In that situation, the driver
may access invalid bits of certain cpumask variables when queue_index >=
nr_cpu_ids.
Signed-off-by: NBenjamin Poirier <bpoirier@suse.de>
Acked-by: NIdo Shamay <idos@mellanox.com>
Fixes: d03a68f8 ("net/mlx4_en: Configure the XPS queue mapping on driver load")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

NLM_F_MULTI must be used only when a NLMSG_DONE message is sent. In fact,
it is sent only at the end of a dump.

Libraries like libnl will wait forever for NLMSG_DONE.

Fixes: e5a55a89 ("net: create generic bridge ops")
Fixes: 815cccbf ("ixgbe: add setlink, getlink support to ixgbe and ixgbevf")
CC: John Fastabend <john.r.fastabend@intel.com>
CC: Sathya Perla <sathya.perla@emulex.com>
CC: Subbu Seetharaman <subbu.seetharaman@emulex.com>
CC: Ajit Khaparde <ajit.khaparde@emulex.com>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: intel-wired-lan@lists.osuosl.org
CC: Jiri Pirko <jiri@resnulli.us>
CC: Scott Feldman <sfeldma@gmail.com>
CC: Stephen Hemminger <stephen@networkplumber.org>
CC: bridge@lists.linux-foundation.org
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix the 0x0x prefix in an integer constant.

In this case, while at it, also fix a typo (s/unitcast/unicast/).
Signed-off-by: NAntonio Ospite <ao2@ao2.it>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: netdev@vger.kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix the 0x0x prefix in an integer constant.
Signed-off-by: NAntonio Ospite <ao2@ao2.it>
Cc: Jay Cliburn <jcliburn@gmail.com>
Cc: Chris Snook <chris.snook@gmail.com>
Cc: netdev@vger.kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These flags are redundant with dev->features. Remove them.
Just make sure to set dev->features ourselves in bnx2x_set_features()
before performing the reload of the card.
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is simpler to have the TPA mode as one three-state variable.
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If disable_tpa is set, remove NETIF_F_LRO from hw_features, so ethtool sees
it as "off [fixed]".

Note that setting the NETIF_F_LRO bit in dev->features in the 'else'
branch is not needed, because the bit was already set by
bnx2x_init_dev().

Then the check for disable_tpa in in bnx2x_fix_features() becomes unnecessary.
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1. Introduce netif-msg to netvsc to control debug logging output
and keep msg_enable in netvsc_device_context so that it is
kept persistently.
2. Only call dump_rndis_message() when NETIF_MSG_RX_ERR or above
is specified in netvsc module debug param.
In non-debug mode, in current code, dump_rndis_message() will not
dump anything but it still initialize some local variables and
process the switch logic which is unnecessary, especially in
high network throughput situation.
Signed-off-by: NSimon Xiao <sixiao@microsoft.com>
Reviewed-by: NK. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 335f4919 (sched/idle: Use explicit broadcast oneshot
control function) replaced clockevents_notify() invocations in
cpuidle_idle_call() with direct calls to tick_broadcast_enter()
and tick_broadcast_exit(), but it overlooked the fact that
interrupts were already enabled before calling the latter which
led to functional breakage on systems using idle states with the
CPUIDLE_FLAG_TIMER_STOP flag set.

Fix that by moving the invocations of tick_broadcast_enter()
and tick_broadcast_exit() down into cpuidle_enter_state() where
interrupts are still disabled when tick_broadcast_exit() is
called.  Also ensure that interrupts will be disabled before
running tick_broadcast_exit() even if they have been enabled by
the idle state's ->enter callback.  Trigger a WARN_ON_ONCE() in
that case, as we generally don't want that to happen for states
with CPUIDLE_FLAG_TIMER_STOP set.

Fixes: 335f4919 (sched/idle: Use explicit broadcast oneshot control function)
Reported-and-tested-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reported-and-tested-by: NSudeep Holla <sudeep.holla@arm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Channels allocated via dma_get_any_slave_channel were not increasing
the counter tracking private allocations.  When these channels were
released, privatecnt may erroneously fall to zero.  The DMA device
would then lose its DMA_PRIVATE cap and fail to allocate future private
channels (via private_candidate) as any allocations still outstanding
would incorrectly be seen as public allocations.
Signed-off-by: NChristopher Freeman <cfreeman@nvidia.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Commit 9faf6136 (ACPI / SBS: Disable smart battery manager on
Apple) introduced a regression disabling the SBS battery manager.
The battery manager should be marked as present when
acpi_manager_get_info() returns 0.

Fixes: 9faf6136 (ACPI / SBS: Disable smart battery manager on Apple)
Signed-off-by: NChris Bainbridge <chris.bainbridge@gmail.com>
Cc: 3.18+ <stable@vger.kernel.org> # 3.18+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The Exar XR17V358 chip usually provides only 8 ports. But two chips can be
combined to act as a single 16 port chip. Therefor one chip is configured
as master the second as slave by connecting the mode pin to VCC (master)
or GND (slave).

Then the master chip is reporting a different device-id depending on
whether a slave is detected or not. The UARTs 8-15 are addressed from
0x2000-0x3fff. So the offset of 0x400 from UART to UART can be used to
address all 16 ports as before.

See: https://www.exar.com/common/content/document.ashx?id=1587 page 11
Signed-off-by: NSoeren Grunewald <soeren.grunewald@desy.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This WA is avoid problem between shadow vs wake FIFO unload
problem during CPD/RC6 transactions on CHV.

v2: Define individual bits GTFIFOCTL (Ville)

v3: move WA to uncore_early_sanitize (ville)
Signed-off-by: NDeepak S <deepak.s@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
[Jani: fixed some whitespace issues while applying]
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

This patch fixes problems with serial console break. When function
s3c64xx_serial_startup() was started while serial console has been working,
it caused lose of characters written to TX FIFO. This effect was particularly
observable with systemd, which closes serial port every time when it's
not currently needed, hence function s3c64xx_serial_startup() is called
quite often there. To fix this problem we avoid resetting TX FIFO if port is
used as serial console.

Example of broken console log:

[ 1086.7         Expecting device dev-ttySAC1.device...
[ 1086.[  OK  ] Reached target Paths.
[ 1086.756416] s[  OK  ] Reached target Swap.
[ 1086.776413] systemd[1]: Reached target Swap.
[ 1086.776642] systemd[1]: Starting Root Slice.
[    5.53403[  OK  ] Created slice Root Slice.
[    5.548433] systemd[1]: Create[  OK  ] Created slice User and Session Slice.
[    5.568414] sys[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[    5.588388] s[  OK  ] Listening on Delayed Shutdown Socket.
[    5.608376] sy[  OK  ] Listening on Journal Socket (/dev/log).
[    5.628361] [  OK  ] Listening on udev Kernel Socket.
[    5.648357] s[  OK  ] Listening on udev Control Socket.
[    5.668353] s[  OK  ] Listening on Journal Socket.
[    5.688366] systemd[1]: Listeni[  OK  ] Created slice System Slice.
[    5.708393]          Mounting Temporary Directory...
[ 7139.067436]          Starting prepare device daemon...
[ 7139.091726] sy         Starting Generate environment from /etc/profile.d...
[    5.792867] system         Starting Create Static Device Nodes in /dev...
[ 7848.718         Mounting Debug File System...
[ 7848.7384         Mounting Configuration File System...
[    5.852         Starting Apply Kernel Variables...
[    5.8720         Starting Setup Virtual Console...
[ 7848.798         Starting udev Coldplug all Devices...
[ 7848.817         Starting Journal Service...
[  OK  ] Started Journal Service.
[ 7848.854222] s[  OK  ] Reached target Slices.
         Starting Remount Root and Kernel File Systems...
[  OK  ] Mounted Configuration File System.
Reported-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NRobert Baldyga <r.baldyga@samsung.com>
Reviewed-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Maxburst was not set when doing the dma slave configuration. This value
is checked by the recently introduced xdmac. It causes an error when
doing the slave configuration and so prevents from using dma.
Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Cc: <stable@vger.kernel.org> # 3.12 and later
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Do not probe all serial drivers by of_serial.c which are using
device_type = "serial"; property. Only drivers which have valid
compatible strings listed in the driver should be probed.

When PORT_UNKNOWN is setup probe will fail anyway.

Arnd quotation about driver historical background:
"when I wrote that driver initially, the idea was that it would
get used as a stub to hook up all other serial drivers but after
that, the common code learned to create platform devices from DT"

This patch fix the problem with on the system with xilinx_uartps and
16550a where of_serial failed to register for xilinx_uartps and because
of irq_dispose_mapping() removed irq_desc. Then when xilinx_uartps was asking
for irq with request_irq() EINVAL is returned.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
CC: <stable@vger.kernel.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

For systems with CONFIG_SERIAL_OF_PLATFORM=y and device_type =
"serial"; property in DT of_serial.c driver maps and unmaps IRQ (because
driver probe fails). Then a driver is called but irq mapping is not
created that's why driver is failing again in again on request_irq().
Based on this use platform_get_irq() instead of platform_get_resource()
which is doing irq_desc allocation and driver itself can request IRQ.

Fix both xilinx serial drivers in the tree.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
CC: <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix uart_console_write() kernel-doc build warnings.

Warning(drivers/tty/serial/serial_core.c:1778): No description found for parameter 'putchar'
Warning(drivers/tty/serial/serial_core.c:1778): Excess function parameter 'write' description in 'uart_console_write'

Fixes: 1cfe42b7 ("serial: core: Fix kernel doc for uart_console_write()")
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This is needed by Bluetooth hci_uart module to be able to change speed
of Bluetooth controller and local UART.
Signed-off-by: NFrederic Danis <frederic.danis@linux.intel.com>
Reviewed-by: NPeter Hurley <peter@hurleysoftware.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Phil and I found out a problem with commit:

  7e860a6e ("cdc-acm: add sanity checks")

It added some sanity checks to ignore potential garbage in CDC headers but
also introduced a potential infinite loop.  This can happen at the first
loop iteration (elength = 0 in that case) if the description isn't a
DT_CS_INTERFACE or later if 'buffer[0]' is zero.

It should also be noted that the wrong length was being added to 'buffer'
in case 'buffer[1]' was not a DT_CS_INTERFACE descriptor, since elength was
assigned after that check in the loop.

A specially crafted USB device could be used to trigger this infinite loop.

Fixes: 7e860a6e ("cdc-acm: add sanity checks")
Signed-off-by: NPhil Turnbull <phil.turnbull@oracle.com>
Signed-off-by: NQuentin Casasnovas <quentin.casasnovas@oracle.com>
CC: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
CC: Oliver Neukum <oneukum@suse.de>
CC: Adam Lee <adam8157@gmail.com>
CC: <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 70843f62 ("usb: host: ehci-msm: Use
devm_ioremap_resource instead of devm_ioremap") and commit
e507bf57 ("host: ehci-msm: remove duplicate check on resource"),
because msm_otg and this driver are using same address space to
access AHB mode and USB command registers.
Signed-off-by: NIvan T. Ivanov <ivan.ivanov@linaro.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NVivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Wrongly release mutex lock during otg_statemachine may result in re-enter
otg_statemachine, which is not allowed, we should do next state transtition
after previous one completed.

Fixes: 826cfe75 ("usb: chipidea: add OTG fsm operation functions implementation")
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: NLi Jun <jun.li@freescale.com>
Signed-off-by: NPeter Chen <peter.chen@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Testing has shown that ASM1053 devices do not work properly with transfers
larger than 240 sectors, so set max_sectors to 240 on these.

Cc: stable@vger.kernel.org # 3.16
Reported-by: NSteve Bangert <sbangert@frontier.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Tested-by: NSteve Bangert <sbangert@frontier.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>