crb_check_resource() in TPM CRB driver calls
acpi_dev_resource_memory() which only handles 32-bit resources.
Adding a call to acpi_dev_resource_address_space() in TPM CRB
driver which handles 64-bit resources.
Signed-off-by: NJiandi An <anjiandi@codeaurora.org>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

Drop duplicate header module.h from tpm_tis_spi.c.
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

tpm/st33zp24/st33zp24.c does not use any miscdevice so this patch remove
this unnecessary inclusion.
Signed-off-by: NCorentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

Use corret kdoc format for function description and eliminate warning
of type:

tpm_ibmvtpm.c:66: warning: No description found for parameter 'count'
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

The tpm stack uses pdev name convention for the parent device.
Fix that also in tpm_chip_alloc().

Fixes: 3897cd9c ("tpm: Split out the devm stuff from tpmm_chip_alloc")'
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

Use correct kdoc format, describe correct parameters and return values.
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

Functions tpm_transmit and transmit_cmd are referenced
from other functions kdoc hence deserve documentation.
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

There is no point in having an extra type for extra confusion. u64 is
unambiguous.

Conversion was done with the following coccinelle script:

@rem@
@@
-typedef u64 cycle_t;

@fix@
typedef cycle_t;
@@
-cycle_t
+u64
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>

This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
  sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.
Requested-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

struct ports_device includes a config field including the whole
virtio_console_config, but only max_nr_ports in there is ever updated or
used. The rest is unused and in fact does not even mirror the
device config. Drop everything except max_nr_ports,
saving some memory.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NJason Wang <jasowang@redhat.com>

idr_find_slowpath() is not intended to be part of the public API, it's
an implementation detail.  There's no reason to skip straight to the
slowpath here.

Link: http://lkml.kernel.org/r/1480369871-5271-64-git-send-email-mawilcox@linuxonhyperv.comSigned-off-by: NMatthew Wilcox <mawilcox@microsoft.com>
Tested-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Marcel Selhorst <tpmdd@selhorst.net>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Every single user of vmf->virtual_address typed that entry to unsigned
long before doing anything with it so the type of virtual_address does
not really provide us any additional safety.  Just use masked
vmf->address which already has the appropriate type.

Link: http://lkml.kernel.org/r/1479460644-25076-3-git-send-email-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a computer has an IPMI system interface, the device interface
is most probably also desired. Autoloading of ipmi_devintf currently
works only if ipmi_si has allocated a platform device. That doesn't
happen if the SI interface was detected e.g. via ACPI. But ACPI
detection is preferred these days, see e.g. kernel.org bug 46741.

This patch introduces a softdep in place of the existing modalias
for ipmi_devintf.
Signed-off-by: NMartin Wilck <mwilck@suse.com>
Suggested-by: NTakashi Iwai <tiwai@suse.com>

I moved this to ipmi_msghandler.c, so it works for all IPMI
interfaces.  Retested by Martin.
Tested-by: NMartin Wilck <mwilck@suse.com>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>

The "ret = " assignment seems to have accidentally been left off.

Fixes: f2ed287b ("char/pcmcia: add scr24x_cs chip card interface driver")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NLubomir Rintel <lkundrak@v3.sk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This bug is as old as git.  We need to be calling spin_unlock_irqrestore()
instead of regular spin_unlock() here.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

After parport starts using the device model, all pardevice drivers
should decide in their match_port callback function if they want to
attach with that particulatr port. ppdev has been converted to use the
new parport device-model code but pp_attach() tried to attach with all
the ports.
Create a new array of pointer and use that to remember the ports we
have attached. And use that information to skip attaching ports which
we have already attached.
Tested-by: NJoe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: NSudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The coding style recommends not to use printk. Use pr_* macros.
Signed-off-by: NSudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The variable name was only released if parport_register_dev_model()
fails. Now that we are using the device-model the parport driver
will duplicate the name and use it. So we can release the variable
after the device has been registered with the parport.
Suggested-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NSudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

If tpm_chip_register fails vtpm must not call tpm_chip_unregister:

> [   58.271017]  [<ffffffff8155bd32>] dpm_sysfs_remove+0x22/0x60
> [   58.271017]  [<ffffffff8154e438>] device_del+0x58/0x280
> [   58.271017]  [<ffffffffa024c020>] tpm_chip_unregister+0x40/0xb0 [tpm]
> [   58.271017]  [<ffffffffa0292360>] vtpm_proxy_fops_release+0x40/0x60 [tpm_vtpm_proxy]

[jarkko.sakkinen@linux.intel.com: cleaned up unneeded goto away]
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

The event log is an optional firmware feature, if the firmware
does not support it then the securityfs files should not be created
and no other notification given.

- Uniformly return -ENODEV from the tpm_bios_log_setup cone if
  no event log is detected.
- Check in ACPI if this node was discovered via ACPI.
- Improve the check in OF to make sure there is a parent and to
  fail detection if the two log properties are not declared
- Pass through all other error codes instead of filtering just some
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

Check the bios_dir entry for NULL before accessing it. Currently
this crashes the driver when a TPM 2 is attached and the entries
are NULL.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

device_node np contains a garbage value from the stack and it
is only set if chip->dev.parent->of_node is not null.  Thus the
check for a null np won't spot a garbage value of np from the
stack if chip->dev.parent->of_node is null and if np contains
an garbage non-null value.

I believe the correct fix is to return -ENODEV if and only if
chip->dev.parent->of_node is null.

Found with static analysis by CoverityScan, CID 1377755
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

This patch removes the unnecessary error messages on failing to
allocate memory and replaces pr_err/printk with dev_dbg/dev_info
as applicable.
Suggested-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NNayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

Using the device of_node property is a better way to refer to the
device tree node rather than of_find_node_by_name().
Suggested-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NNayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

Currently, read_log() has two implementations: one for ACPI platforms
and the other for device tree(OF) based platforms. The proper one is
selected at compile time using Kconfig and #ifdef in the Makefile,
which is not the recommended approach.

This patch removes the #ifdef in the Makefile by defining a single
read_log() method, which checks for ACPI/OF event log properties at
runtime.

[jarkko.sakkinen@linux.intel.com: added tpm_ prefix to read_log*]
Suggested-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NNayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

This patch fixes the missing .owner field in
tpm_bios_measurements_ops definition.
Suggested-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NNayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

Move the backing memory for the event log into tpm_chip and push
the tpm_chip into read_log. This optimizes read_log processing by
only doing it once and prepares things for the next patches in the
series which require the tpm_chip to locate the event log via
ACPI and OF handles instead of searching.

This is straightfoward except for the issue of passing a kref through
i_private with securityfs. Since securityfs_remove does not have any
removal fencing like sysfs we use the inode lock to safely get a
kref on the tpm_chip.
Suggested-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NNayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

Check for TPM2 chip in tpm_sysfs_add_device, tpm_bios_log_setup and
tpm_bios_log_teardown in order to make code flow cleaner and to enable
to implement TPM 2.0 support later on. This is partially derived from
the commit by Nayna Jain with the extension that also tpm1_chip_register
is dropped.
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NNayna Jain <nayna@linux.vnet.ibm.com>
Tested-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: NNayna Jain <nayna@linux.vnet.ibm.com>

This commit is based on a commit by Nayna Jain. Replaced dynamically
allocated bios_dir with a static array as the size is always constant.
Suggested-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

checkpatch.pl flags warning for symbolic permissions and suggests
to replace with octal value.

This patch changes securityfs pseudo files permission
to octal values in tpm_bios_log_setup().
Signed-off-by: NNayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

This provides an open firwmare driver binding for tpm_tis. OF
is useful on arches where ACPI/PNP is not used.

The tcg,tpm-tis-mmio register map interface is specified by the TCG.
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

Added kdoc comments for VTPM_PROXY_IOC_NEW_DEV so that these can be
imported to the kernel documentation written with rst markup and
generated with Sphinx.
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

Only call pm_runtime_get_sync if the device has a parent. This
change fixes a crash in the tpm_vtpm_proxy driver since that
driver does not have a parent device.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

open() method for event log ascii and binary bios measurements file
operations are very similar. This patch refactors the code into a
single open() call by passing seq_operations as i_node->private data.
Suggested-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NNayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

This is no longer necessary, all calls to tpm_chip_unregister happen
in remove() callbacks.
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NTomas Winkler <tomas.winkler@intel.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

tpm_chip_unregister can only be called after tpm_chip_register.
devm manages the allocation so no unwind is needed here.

Cc: stable@vger.kernel.org
Fixes: afb5abc2 ("tpm: two-phase chip management functions")
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

The tis driver does a tpm_get_timeouts out side of tpm_chip_register,
and tpm_get_timeouts can print a message, resulting in two prints, eg:

 tpm tpm0: [Hardware Error]: Adjusting reported timeouts: A 10000->750000us B 10000->2000000us C 10000->750000us D 10000->750000us

Keep track and prevent tpm_get_timeouts from running a second time, and
clarify the purpose of the call in tpm_tis_core to only be connected to
irq testing.
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

If the TPM we're connecting to uses a static burst count, it will report
a burst count of zero throughout the response read. However, get_burstcount
assumes that a response of zero indicates that the TPM is not ready to
receive more data. In this case, it returns a negative error code, which
is passed on to tpm_tis_{write,read}_bytes as a u16, causing
them to read/write far too many bytes.

This patch checks for negative return codes and bails out from recv_data
and tpm_tis_send_data.

Cc: stable@vger.kernel.org
Fixes: 1107d065 (tpm_tis: Introduce intermediate layer for TPM access)
Signed-off-by: NJosh Zimmerman <joshz@google.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>