- 05 9月, 2015 40 次提交
-
-
由 Andrea Arcangeli 提交于
vma->vm_userfaultfd_ctx is yet another vma parameter that vma_merge must be aware about so that we can merge vmas back like they were originally before arming the userfaultfd on some memory range. Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com> Acked-by: NPavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrea Arcangeli 提交于
This is where the page faults must be modified to call handle_userfault() if userfaultfd_missing() is true (so if the vma->vm_flags had VM_UFFD_MISSING set). handle_userfault() then takes care of blocking the page fault and delivering it to userland. The fault flags must also be passed as parameter so the "read|write" kind of fault can be passed to userland. Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com> Acked-by: NPavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrea Arcangeli 提交于
These two flags gets set in vma->vm_flags to tell the VM common code if the userfaultfd is armed and in which mode (only tracking missing faults, only tracking wrprotect faults or both). If neither flags is set it means the userfaultfd is not armed on the vma. Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com> Acked-by: NPavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrea Arcangeli 提交于
This adds the vm_userfaultfd_ctx to the vm_area_struct. Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com> Acked-by: NPavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrea Arcangeli 提交于
Kernel header defining the methods needed by the VM common code to interact with the userfaultfd. Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com> Acked-by: NPavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrea Arcangeli 提交于
Defines the uAPI of the userfaultfd, notably the ioctl numbers and protocol. Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com> Acked-by: NPavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrea Arcangeli 提交于
userfaultfd needs to wake all waitqueues (pass 0 as nr parameter), instead of the current hardcoded 1 (that would wake just the first waitqueue in the head list). Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com> Acked-by: NPavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrea Arcangeli 提交于
This is the latest userfaultfd patchset. The postcopy live migration feature on the qemu side is mostly ready to be merged and it entirely depends on the userfaultfd syscall to be merged as well. So it'd be great if this patchset could be reviewed for merging in -mm. Userfaults allow to implement on demand paging from userland and more generally they allow userland to more efficiently take control of the behavior of page faults than what was available before (PROT_NONE + SIGSEGV trap). The use cases are: 1) KVM postcopy live migration (one form of cloud memory externalization). KVM postcopy live migration is the primary driver of this work: http://blog.zhaw.ch/icclab/setting-up-post-copy-live-migration-in-openstack/ http://lists.gnu.org/archive/html/qemu-devel/2015-02/msg04873.html 2) postcopy live migration of binaries inside linux containers: http://thread.gmane.org/gmane.linux.kernel.mm/132662 3) KVM postcopy live snapshotting (allowing to limit/throttle the memory usage, unlike fork would, plus the avoidance of fork overhead in the first place). While the wrprotect tracking is not implemented yet, the syscall API is already contemplating the wrprotect fault tracking and it's generic enough to allow its later implementation in a backwards compatible fashion. 4) KVM userfaults on shared memory. The UFFDIO_COPY lowlevel method should be extended to work also on tmpfs and then the uffdio_register.ioctls will notify userland that UFFDIO_COPY is available even when the registered virtual memory range is tmpfs backed. 5) alternate mechanism to notify web browsers or apps on embedded devices that volatile pages have been reclaimed. This basically avoids the need to run a syscall before the app can access with the CPU the virtual regions marked volatile. This depends on point 4) to be fulfilled first, as volatile pages happily apply to tmpfs. Even though there wasn't a real use case requesting it yet, it also allows to implement distributed shared memory in a way that readonly shared mappings can exist simultaneously in different hosts and they can be become exclusive at the first wrprotect fault. This patch (of 22): Add documentation. Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com> Acked-by: NPavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Daniel Borkmann 提交于
While debugging a networking issue, I hit a condition that triggered an object to be freed into the wrong kmem cache, and thus triggered the warning in cache_from_obj(). The arguments in the error message are in wrong order: the location of the object's kmem cache is in cachep, not s. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joonsoo Kim 提交于
Description is almost copied from commit fb05e7a8 ("net: don't wait for order-3 page allocation"). I saw excessive direct memory reclaim/compaction triggered by slub. This causes performance issues and add latency. Slub uses high-order allocation to reduce internal fragmentation and management overhead. But, direct memory reclaim/compaction has high overhead and the benefit of high-order allocation can't compensate the overhead of both work. This patch makes auxiliary high-order allocation atomic. If there is no memory pressure and memory isn't fragmented, the alloction will still success, so we don't sacrifice high-order allocation's benefit here. If the atomic allocation fails, direct memory reclaim/compaction will not be triggered, allocation fallback to low-order immediately, hence the direct memory reclaim/compaction overhead is avoided. In the allocation failure case, kswapd is waken up and trying to make high-order freepages, so allocation could success next time. Following is the test to measure effect of this patch. System: QEMU, CPU 8, 512 MB Mem: 25% memory is allocated at random position to make fragmentation. Memory-hogger occupies 150 MB memory. Workload: hackbench -g 20 -l 1000 Average result by 10 runs (Base va Patched) elapsed_time(s): 4.3468 vs 2.9838 compact_stall: 461.7 vs 73.6 pgmigrate_success: 28315.9 vs 7256.1 Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: Shaohua Li <shli@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Konstantin Khlebnikov 提交于
sysfs_slab_add() shouldn't call kobject_put at error path: this puts last reference of kmem-cache kobject and frees it. Kmem cache will be freed second time at error path in kmem_cache_create(). For example this happens when slub debug was enabled in runtime and somebody creates new kmem cache: # echo 1 | tee /sys/kernel/slab/*/sanity_checks # modprobe configfs "configfs_dir_cache" cannot be merged because existing slab have debug and cannot create new slab because unique name ":t-0000096" already taken. Signed-off-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: NChristoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Gleixner 提交于
Initializing a new slab can introduce rather large latencies because most of the initialization runs always with interrupts disabled. There is no point in doing so. The newly allocated slab is not visible yet, so there is no reason to protect it against concurrent alloc/free. Move the expensive parts of the initialization into allocate_slab(), so for all allocations with GFP_WAIT set, interrupts are enabled. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NChristoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Dangaard Brouer 提交于
Per request of Joonsoo Kim adding kmem debug support. I've tested that when debugging is disabled, then there is almost no performance impact as this code basically gets removed by the compiler. Need some guidance in enabling and testing this. bulk- PREVIOUS - THIS-PATCH 1 - 43 cycles(tsc) 10.811 ns - 44 cycles(tsc) 11.236 ns improved -2.3% 2 - 27 cycles(tsc) 6.867 ns - 28 cycles(tsc) 7.019 ns improved -3.7% 3 - 21 cycles(tsc) 5.496 ns - 22 cycles(tsc) 5.526 ns improved -4.8% 4 - 24 cycles(tsc) 6.038 ns - 19 cycles(tsc) 4.786 ns improved 20.8% 8 - 17 cycles(tsc) 4.280 ns - 18 cycles(tsc) 4.572 ns improved -5.9% 16 - 17 cycles(tsc) 4.483 ns - 18 cycles(tsc) 4.658 ns improved -5.9% 30 - 18 cycles(tsc) 4.531 ns - 18 cycles(tsc) 4.568 ns improved 0.0% 32 - 58 cycles(tsc) 14.586 ns - 65 cycles(tsc) 16.454 ns improved -12.1% 34 - 53 cycles(tsc) 13.391 ns - 63 cycles(tsc) 15.932 ns improved -18.9% 48 - 65 cycles(tsc) 16.268 ns - 50 cycles(tsc) 12.506 ns improved 23.1% 64 - 53 cycles(tsc) 13.440 ns - 63 cycles(tsc) 15.929 ns improved -18.9% 128 - 79 cycles(tsc) 19.899 ns - 86 cycles(tsc) 21.583 ns improved -8.9% 158 - 90 cycles(tsc) 22.732 ns - 90 cycles(tsc) 22.552 ns improved 0.0% 250 - 95 cycles(tsc) 23.916 ns - 98 cycles(tsc) 24.589 ns improved -3.2% Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Dangaard Brouer 提交于
This implements SLUB specific kmem_cache_free_bulk(). SLUB allocator now both have bulk alloc and free implemented. Choose to reenable local IRQs while calling slowpath __slab_free(). In worst case, where all objects hit slowpath call, the performance should still be faster than fallback function __kmem_cache_free_bulk(), because local_irq_{disable+enable} is very fast (7-cycles), while the fallback invokes this_cpu_cmpxchg() which is slightly slower (9-cycles). Nitpicking, this should be faster for N>=4, due to the entry cost of local_irq_{disable+enable}. Do notice that the save+restore variant is very expensive, this is key to why this optimization works. CPU: i7-4790K CPU @ 4.00GHz * local_irq_{disable,enable}: 7 cycles(tsc) - 1.821 ns * local_irq_{save,restore} : 37 cycles(tsc) - 9.443 ns Measurements on CPU CPU i7-4790K @ 4.00GHz Baseline normal fastpath (alloc+free cost): 43 cycles(tsc) 10.834 ns Bulk- fallback - this-patch 1 - 58 cycles(tsc) 14.542 ns - 43 cycles(tsc) 10.811 ns improved 25.9% 2 - 50 cycles(tsc) 12.659 ns - 27 cycles(tsc) 6.867 ns improved 46.0% 3 - 48 cycles(tsc) 12.168 ns - 21 cycles(tsc) 5.496 ns improved 56.2% 4 - 47 cycles(tsc) 11.987 ns - 24 cycles(tsc) 6.038 ns improved 48.9% 8 - 46 cycles(tsc) 11.518 ns - 17 cycles(tsc) 4.280 ns improved 63.0% 16 - 45 cycles(tsc) 11.366 ns - 17 cycles(tsc) 4.483 ns improved 62.2% 30 - 45 cycles(tsc) 11.433 ns - 18 cycles(tsc) 4.531 ns improved 60.0% 32 - 75 cycles(tsc) 18.983 ns - 58 cycles(tsc) 14.586 ns improved 22.7% 34 - 71 cycles(tsc) 17.940 ns - 53 cycles(tsc) 13.391 ns improved 25.4% 48 - 80 cycles(tsc) 20.077 ns - 65 cycles(tsc) 16.268 ns improved 18.8% 64 - 71 cycles(tsc) 17.799 ns - 53 cycles(tsc) 13.440 ns improved 25.4% 128 - 91 cycles(tsc) 22.980 ns - 79 cycles(tsc) 19.899 ns improved 13.2% 158 - 100 cycles(tsc) 25.241 ns - 90 cycles(tsc) 22.732 ns improved 10.0% 250 - 102 cycles(tsc) 25.583 ns - 95 cycles(tsc) 23.916 ns improved 6.9% Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Dangaard Brouer 提交于
Call slowpath __slab_alloc() from within the bulk loop, as the side-effect of this call likely repopulates c->freelist. Choose to reenable local IRQs while calling slowpath. Saving some optimizations for later. E.g. it is possible to extract parts of __slab_alloc() and avoid the unnecessary and expensive (37 cycles) local_irq_{save,restore}. For now, be happy calling __slab_alloc() this lower icache impact of this func and I don't have to worry about correctness. Measurements on CPU CPU i7-4790K @ 4.00GHz Baseline normal fastpath (alloc+free cost): 42 cycles(tsc) 10.601 ns Bulk- fallback - this-patch 1 - 58 cycles(tsc) 14.516 ns - 49 cycles(tsc) 12.459 ns improved 15.5% 2 - 51 cycles(tsc) 12.930 ns - 38 cycles(tsc) 9.605 ns improved 25.5% 3 - 49 cycles(tsc) 12.274 ns - 34 cycles(tsc) 8.525 ns improved 30.6% 4 - 48 cycles(tsc) 12.058 ns - 32 cycles(tsc) 8.036 ns improved 33.3% 8 - 46 cycles(tsc) 11.609 ns - 31 cycles(tsc) 7.756 ns improved 32.6% 16 - 45 cycles(tsc) 11.451 ns - 32 cycles(tsc) 8.148 ns improved 28.9% 30 - 79 cycles(tsc) 19.865 ns - 68 cycles(tsc) 17.164 ns improved 13.9% 32 - 76 cycles(tsc) 19.212 ns - 66 cycles(tsc) 16.584 ns improved 13.2% 34 - 74 cycles(tsc) 18.600 ns - 63 cycles(tsc) 15.954 ns improved 14.9% 48 - 88 cycles(tsc) 22.092 ns - 77 cycles(tsc) 19.373 ns improved 12.5% 64 - 80 cycles(tsc) 20.043 ns - 68 cycles(tsc) 17.188 ns improved 15.0% 128 - 99 cycles(tsc) 24.818 ns - 89 cycles(tsc) 22.404 ns improved 10.1% 158 - 99 cycles(tsc) 24.977 ns - 92 cycles(tsc) 23.089 ns improved 7.1% 250 - 106 cycles(tsc) 26.552 ns - 99 cycles(tsc) 24.785 ns improved 6.6% Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Dangaard Brouer 提交于
First piece: acceleration of retrieval of per cpu objects If we are allocating lots of objects then it is advantageous to disable interrupts and avoid the this_cpu_cmpxchg() operation to get these objects faster. Note that we cannot do the fast operation if debugging is enabled, because we would have to add extra code to do all the debugging checks. And it would not be fast anyway. Note also that the requirement of having interrupts disabled avoids having to do processor flag operations. Allocate as many objects as possible in the fast way and then fall back to the generic implementation for the rest of the objects. Measurements on CPU CPU i7-4790K @ 4.00GHz Baseline normal fastpath (alloc+free cost): 42 cycles(tsc) 10.554 ns Bulk- fallback - this-patch 1 - 57 cycles(tsc) 14.432 ns - 48 cycles(tsc) 12.155 ns improved 15.8% 2 - 50 cycles(tsc) 12.746 ns - 37 cycles(tsc) 9.390 ns improved 26.0% 3 - 48 cycles(tsc) 12.180 ns - 33 cycles(tsc) 8.417 ns improved 31.2% 4 - 48 cycles(tsc) 12.015 ns - 32 cycles(tsc) 8.045 ns improved 33.3% 8 - 46 cycles(tsc) 11.526 ns - 30 cycles(tsc) 7.699 ns improved 34.8% 16 - 45 cycles(tsc) 11.418 ns - 32 cycles(tsc) 8.205 ns improved 28.9% 30 - 80 cycles(tsc) 20.246 ns - 73 cycles(tsc) 18.328 ns improved 8.8% 32 - 79 cycles(tsc) 19.946 ns - 72 cycles(tsc) 18.208 ns improved 8.9% 34 - 78 cycles(tsc) 19.659 ns - 71 cycles(tsc) 17.987 ns improved 9.0% 48 - 86 cycles(tsc) 21.516 ns - 82 cycles(tsc) 20.566 ns improved 4.7% 64 - 93 cycles(tsc) 23.423 ns - 89 cycles(tsc) 22.480 ns improved 4.3% 128 - 100 cycles(tsc) 25.170 ns - 99 cycles(tsc) 24.871 ns improved 1.0% 158 - 102 cycles(tsc) 25.549 ns - 101 cycles(tsc) 25.375 ns improved 1.0% 250 - 101 cycles(tsc) 25.344 ns - 100 cycles(tsc) 25.182 ns improved 1.0% Signed-off-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Lameter 提交于
Add the basic infrastructure for alloc/free operations on pointer arrays. It includes a generic function in the common slab code that is used in this infrastructure patch to create the unoptimized functionality for slab bulk operations. Allocators can then provide optimized allocation functions for situations in which large numbers of objects are needed. These optimization may avoid taking locks repeatedly and bypass metadata creation if all objects in slab pages can be used to provide the objects required. Allocators can extend the skeletons provided and add their own code to the bulk alloc and free functions. They can keep the generic allocation and freeing and just fall back to those if optimizations would not work (like for example when debugging is on). Signed-off-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Dangaard Brouer 提交于
With this patchset the SLUB allocator now has both bulk alloc and free implemented. This patchset mostly optimizes the "fastpath" where objects are available on the per CPU fastpath page. This mostly amortize the less-heavy none-locked cmpxchg_double used on fastpath. The "fallback" bulking (e.g __kmem_cache_free_bulk) provides a good basis for comparison. Measurements[1] of the fallback functions __kmem_cache_{free,alloc}_bulk have been copied from slab_common.c and forced "noinline" to force a function call like slab_common.c. Measurements on CPU CPU i7-4790K @ 4.00GHz Baseline normal fastpath (alloc+free cost): 42 cycles(tsc) 10.601 ns Measurements last-patch with disabled debugging: Bulk- fallback - this-patch 1 - 57 cycles(tsc) 14.448 ns - 44 cycles(tsc) 11.236 ns improved 22.8% 2 - 51 cycles(tsc) 12.768 ns - 28 cycles(tsc) 7.019 ns improved 45.1% 3 - 48 cycles(tsc) 12.232 ns - 22 cycles(tsc) 5.526 ns improved 54.2% 4 - 48 cycles(tsc) 12.025 ns - 19 cycles(tsc) 4.786 ns improved 60.4% 8 - 46 cycles(tsc) 11.558 ns - 18 cycles(tsc) 4.572 ns improved 60.9% 16 - 45 cycles(tsc) 11.458 ns - 18 cycles(tsc) 4.658 ns improved 60.0% 30 - 45 cycles(tsc) 11.499 ns - 18 cycles(tsc) 4.568 ns improved 60.0% 32 - 79 cycles(tsc) 19.917 ns - 65 cycles(tsc) 16.454 ns improved 17.7% 34 - 78 cycles(tsc) 19.655 ns - 63 cycles(tsc) 15.932 ns improved 19.2% 48 - 68 cycles(tsc) 17.049 ns - 50 cycles(tsc) 12.506 ns improved 26.5% 64 - 80 cycles(tsc) 20.009 ns - 63 cycles(tsc) 15.929 ns improved 21.3% 128 - 94 cycles(tsc) 23.749 ns - 86 cycles(tsc) 21.583 ns improved 8.5% 158 - 97 cycles(tsc) 24.299 ns - 90 cycles(tsc) 22.552 ns improved 7.2% 250 - 102 cycles(tsc) 25.681 ns - 98 cycles(tsc) 24.589 ns improved 3.9% Benchmarking shows impressive improvements in the "fastpath" with a small number of objects in the working set. Once the working set increases, resulting in activating the "slowpath" (that contains the heavier locked cmpxchg_double) the improvement decreases. I'm currently working on also optimizing the "slowpath" (as network stack use-case hits this), but this patchset should provide a good foundation for further improvements. Rest of my patch queue in this area needs some more work, but preliminary results are good. I'm attending Netfilter Workshop[2] next week, and I'll hopefully return working on further improvements in this area. This patch (of 6): s/succedd/succeed/ Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ulrich Obergfell 提交于
Rename watchdog_suspend() to lockup_detector_suspend() and watchdog_resume() to lockup_detector_resume() to avoid confusion with the watchdog subsystem and to be consistent with the existing name lockup_detector_init(). Also provide comment blocks to explain the watchdog_running and watchdog_suspended variables and their relationship. Signed-off-by: NUlrich Obergfell <uobergfe@redhat.com> Reviewed-by: NAaron Tomlin <atomlin@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Don Zickus <dzickus@redhat.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Stephane Eranian <eranian@google.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ulrich Obergfell 提交于
Remove watchdog_nmi_disable_all() and watchdog_nmi_enable_all() since these functions are no longer needed. If a subsystem has a need to deactivate the watchdog temporarily, it should utilize the watchdog_suspend() and watchdog_resume() functions. [akpm@linux-foundation.org: fix build with CONFIG_LOCKUP_DETECTOR=m] Signed-off-by: NUlrich Obergfell <uobergfe@redhat.com> Reviewed-by: NAaron Tomlin <atomlin@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Don Zickus <dzickus@redhat.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Stephane Eranian <eranian@google.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ulrich Obergfell 提交于
Remove update_watchdog() and restart_watchdog_hrtimer() since these functions are no longer needed. Changes of parameters such as the sample period are honored at the time when the watchdog threads are being unparked. Signed-off-by: NUlrich Obergfell <uobergfe@redhat.com> Reviewed-by: NAaron Tomlin <atomlin@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Don Zickus <dzickus@redhat.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Stephane Eranian <eranian@google.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ulrich Obergfell 提交于
This interface can be utilized to deactivate the hard and soft lockup detector temporarily. Callers are expected to minimize the duration of deactivation. Multiple deactivations are allowed to occur in parallel but should be rare in practice. [akpm@linux-foundation.org: remove unneeded static initialization] Signed-off-by: NUlrich Obergfell <uobergfe@redhat.com> Reviewed-by: NAaron Tomlin <atomlin@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Don Zickus <dzickus@redhat.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Stephane Eranian <eranian@google.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ulrich Obergfell 提交于
Originally watchdog_nmi_enable(cpu) and watchdog_nmi_disable(cpu) were only called in watchdog thread context. However, the following commits utilize these functions outside of watchdog thread context too. commit 9809b18f Author: Michal Hocko <mhocko@suse.cz> Date: Tue Sep 24 15:27:30 2013 -0700 watchdog: update watchdog_thresh properly commit b3738d29 Author: Stephane Eranian <eranian@google.com> Date: Mon Nov 17 20:07:03 2014 +0100 watchdog: Add watchdog enable/disable all functions Hence, it is now possible that these functions execute concurrently with the same 'cpu' argument. This concurrency is problematic because per-cpu 'watchdog_ev' can be accessed/modified without adequate synchronization. The patch series aims to address the above problem. However, instead of introducing locks to protect per-cpu 'watchdog_ev' a different approach is taken: Invoke these functions by parking and unparking the watchdog threads (to ensure they are always called in watchdog thread context). static struct smp_hotplug_thread watchdog_threads = { ... .park = watchdog_disable, // calls watchdog_nmi_disable() .unpark = watchdog_enable, // calls watchdog_nmi_enable() }; Both previously mentioned commits call these functions in a similar way and thus in principle contain some duplicate code. The patch series also avoids this duplication by providing a commonly usable mechanism. - Patch 1/4 introduces the watchdog_{park|unpark}_threads functions that park/unpark all watchdog threads specified in 'watchdog_cpumask'. They are intended to be called inside of kernel/watchdog.c only. - Patch 2/4 introduces the watchdog_{suspend|resume} functions which can be utilized by external callers to deactivate the hard and soft lockup detector temporarily. - Patch 3/4 utilizes watchdog_{park|unpark}_threads to replace some code that was introduced by commit 9809b18f. - Patch 4/4 utilizes watchdog_{suspend|resume} to replace some code that was introduced by commit b3738d29. A few corner cases should be mentioned here for completeness. - kthread_park() of watchdog/N could hang if cpu N is already locked up. However, if watchdog is enabled the lockup will be detected anyway. - kthread_unpark() of watchdog/N could hang if cpu N got locked up after kthread_park(). The occurrence of this scenario should be _very_ rare in practice, in particular because it is not expected that temporary deactivation will happen frequently, and if it happens at all it is expected that the duration of deactivation will be short. This patch (of 4): introduce watchdog_park_threads() and watchdog_unpark_threads() These functions are intended to be used only from inside kernel/watchdog.c to park/unpark all watchdog threads that are specified in watchdog_cpumask. Signed-off-by: NUlrich Obergfell <uobergfe@redhat.com> Reviewed-by: NAaron Tomlin <atomlin@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Don Zickus <dzickus@redhat.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Stephane Eranian <eranian@google.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Guenter Roeck 提交于
The kernel's NMI watchdog has nothing to do with the watchdog subsystem. Its header declarations should be in linux/nmi.h, not linux/watchdog.h. The code provided two sets of dummy functions if HARDLOCKUP_DETECTOR is not configured, one in the include file and one in kernel/watchdog.c. Remove the dummy functions from kernel/watchdog.c and use those from the include file. Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Cc: Stephane Eranian <eranian@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Don Zickus <dzickus@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Frederic Weisbecker 提交于
housekeeping_mask gathers all the CPUs that aren't part of the nohz_full set. This is exactly what we want the watchdog to be affine to without the need to use complicated cpumask operations. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Reviewed-by: NChris Metcalf <cmetcalf@ezchip.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Frederic Weisbecker 提交于
It makes the registration cheaper and simpler for the smpboot per-cpu kthread users that don't need to always update the cpumask after threads creation. [sfr@canb.auug.org.au: fix for allow passing the cpumask on per-cpu thread registration] Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Reviewed-by: NChris Metcalf <cmetcalf@ezchip.com> Reviewed-by: NThomas Gleixner <tglx@linutronix.de> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Frederic Weisbecker 提交于
The per-cpu kthread cleanup() callback is the mirror of the setup() callback. When the per-cpu kthread is started, it first calls setup() to initialize the resources which are then released by cleanup() when the kthread exits. Now since the introduction of a per-cpu kthread cpumask, the kthreads excluded by the cpumask on boot may happen to be parked immediately after their creation without taking the setup() stage, waiting to be asked to unpark to do so. Then when smpboot_unregister_percpu_thread() is later called, the kthread is stopped without having ever called setup(). But this triggers a bug as the kthread unconditionally calls cleanup() on exit but this doesn't mirror any setup(). Thus the kernel crashes because we try to free resources that haven't been initialized, as in the watchdog case: WATCHDOG disable 0 WATCHDOG disable 1 WATCHDOG disable 2 BUG: unable to handle kernel NULL pointer dereference at (null) IP: hrtimer_active+0x26/0x60 [...] Call Trace: hrtimer_try_to_cancel+0x1c/0x280 hrtimer_cancel+0x1d/0x30 watchdog_disable+0x56/0x70 watchdog_cleanup+0xe/0x10 smpboot_thread_fn+0x23c/0x2c0 kthread+0xf8/0x110 ret_from_fork+0x3f/0x70 This bug is currently masked with explicit kthread unparking before kthread_stop() on smpboot_destroy_threads(). This forces a call to setup() and then unpark(). We could fix this by unconditionally calling setup() on kthread entry. But setup() isn't always cheap. In the case of watchdog it launches hrtimer, perf events, etc... So we may as well like to skip it if there are chances the kthread will never be used, as in a reduced cpumask value. So let's simply do a state machine check before calling cleanup() that makes sure setup() has been called before mirroring it. And remove the nasty hack workaround. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Reviewed-by: NChris Metcalf <cmetcalf@ezchip.com> Reviewed-by: NThomas Gleixner <tglx@linutronix.de> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Frederic Weisbecker 提交于
The cpumask is allocated before threads get created. If the latter step fails, we need to free the cpumask. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Reviewed-by: NChris Metcalf <cmetcalf@ezchip.com> Reviewed-by: NThomas Gleixner <tglx@linutronix.de> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kees Cook 提交于
Many file systems that implement the show_options hook fail to correctly escape their output which could lead to unescaped characters (e.g. new lines) leaking into /proc/mounts and /proc/[pid]/mountinfo files. This could lead to confusion, spoofed entries (resulting in things like systemd issuing false d-bus "mount" notifications), and who knows what else. This looks like it would only be the root user stepping on themselves, but it's possible weird things could happen in containers or in other situations with delegated mount privileges. Here's an example using overlay with setuid fusermount trusting the contents of /proc/mounts (via the /etc/mtab symlink). Imagine the use of "sudo" is something more sneaky: $ BASE="ovl" $ MNT="$BASE/mnt" $ LOW="$BASE/lower" $ UP="$BASE/upper" $ WORK="$BASE/work/ 0 0 none /proc fuse.pwn user_id=1000" $ mkdir -p "$LOW" "$UP" "$WORK" $ sudo mount -t overlay -o "lowerdir=$LOW,upperdir=$UP,workdir=$WORK" none /mnt $ cat /proc/mounts none /root/ovl/mnt overlay rw,relatime,lowerdir=ovl/lower,upperdir=ovl/upper,workdir=ovl/work/ 0 0 none /proc fuse.pwn user_id=1000 0 0 $ fusermount -u /proc $ cat /proc/mounts cat: /proc/mounts: No such file or directory This fixes the problem by adding new seq_show_option and seq_show_option_n helpers, and updating the vulnerable show_option handlers to use them as needed. Some, like SELinux, need to be open coded due to unusual existing escape mechanisms. [akpm@linux-foundation.org: add lost chunk, per Kees] [keescook@chromium.org: seq_show_option should be using const parameters] Signed-off-by: NKees Cook <keescook@chromium.org> Acked-by: NSerge Hallyn <serge.hallyn@canonical.com> Acked-by: NJan Kara <jack@suse.com> Acked-by: NPaul Moore <paul@paul-moore.com> Cc: J. R. Okajima <hooanon05g@gmail.com> Signed-off-by: NKees Cook <keescook@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joseph Qi 提交于
NULL check before kfree is redundant and so clean them up. Signed-off-by: NJoseph Qi <joseph.qi@huawei.com> Reviewed-by: NMark Fasheh <mfasheh@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
These uses sometimes do and sometimes don't have '\n' terminations. Make the uses consistently use '\n' terminations and remove the newline from the functions. Miscellanea: o Coalesce formats o Realign arguments Signed-off-by: NJoe Perches <joe@perches.com> Reviewed-by: NMark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Xue jiufei 提交于
While appending an extent to a file, it will call these functions: ocfs2_insert_extent -> call ocfs2_grow_tree() if there's no free rec -> ocfs2_add_branch add a new branch to extent tree, now rec[0] in the leaf of rightmost path is empty -> ocfs2_do_insert_extent -> ocfs2_rotate_tree_right -> ocfs2_extend_rotate_transaction -> jbd2_journal_restart if jbd2_journal_extend fail -> ocfs2_insert_path -> ocfs2_extend_trans -> jbd2_journal_restart if jbd2_journal_extend fail -> ocfs2_insert_at_leaf -> ocfs2_et_update_clusters Function jbd2_journal_restart() may be called and it may happened that buffers dirtied in ocfs2_add_branch() are committed while buffers dirtied in ocfs2_insert_at_leaf() and ocfs2_et_update_clusters() are not. So an empty rec[0] is left in rightmost path which will cause read-only filesystem when call ocfs2_commit_truncate() with the error message: "Inode %lu has an empty extent record". This is not a serious problem, so remove the rightmost path when call ocfs2_commit_truncate(). Signed-off-by: Njoyce.xue <xuejiufei@huawei.com> Reviewed-by: NMark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 yangwenfang 提交于
1: After we call ocfs2_journal_access_di() in ocfs2_write_begin(), jbd2_journal_restart() may also be called, in this function transaction A's t_updates-- and obtains a new transaction B. If jbd2_journal_commit_transaction() is happened to commit transaction A, when t_updates==0, it will continue to complete commit and unfile buffer. So when jbd2_journal_dirty_metadata(), the handle is pointed a new transaction B, and the buffer head's journal head is already freed, jh->b_transaction == NULL, jh->b_next_transaction == NULL, it returns EINVAL, So it triggers the BUG_ON(status). thread 1 jbd2 ocfs2_write_begin jbd2_journal_commit_transaction ocfs2_write_begin_nolock ocfs2_start_trans jbd2__journal_start(t_updates+1, transaction A) ocfs2_journal_access_di ocfs2_write_cluster_by_desc ocfs2_mark_extent_written ocfs2_change_extent_flag ocfs2_split_extent ocfs2_extend_rotate_transaction jbd2_journal_restart (t_updates-1,transaction B) t_updates==0 __jbd2_journal_refile_buffer (jh->b_transaction = NULL) ocfs2_write_end ocfs2_write_end_nolock ocfs2_journal_dirty jbd2_journal_dirty_metadata(bug) ocfs2_commit_trans 2. In ext4, I found that: jbd2_journal_get_write_access() called by ext4_write_end. ext4_write_begin ext4_journal_start __ext4_journal_start_sb ext4_journal_check_start jbd2__journal_start ext4_write_end ext4_mark_inode_dirty ext4_reserve_inode_write ext4_journal_get_write_access jbd2_journal_get_write_access ext4_mark_iloc_dirty ext4_do_update_inode ext4_handle_dirty_metadata jbd2_journal_dirty_metadata 3. So I think we should put ocfs2_journal_access_di before ocfs2_journal_dirty in the ocfs2_write_end. and it works well after my modification. Signed-off-by: Nvicky <vicky.yangwenfang@huawei.com> Reviewed-by: NMark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Zhangguanghui <zhang.guanghui@h3c.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tina Ruchandani 提交于
o2hb_elapsed_msecs computes the time taken for a disk heartbeat. 'struct timeval' variables are used to store start and end times. On 32-bit systems, the 'tv_sec' component of 'struct timeval' will overflow in year 2038 and beyond. This patch solves the overflow with the following: 1. Replace o2hb_elapsed_msecs using 'ktime_t' values to measure start and end time, and built-in function 'ktime_ms_delta' to compute the elapsed time. ktime_get_real() is used since the code prints out the wallclock time. 2. Changes format string to print time as a single 64-bit nanoseconds value ("%lld") instead of seconds and microseconds. This simplifies the code since converting ktime_t to that format would need expensive computation. However, the debug log string is less readable than the previous format. Signed-off-by: NTina Ruchandani <ruchandani.tina@gmail.com> Suggested by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: NMark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joseph Qi 提交于
There is a race case between crashed dio and rm, which will lead to OCFS2_VALID_FL not set read-only. N1 N2 ------------------------------------------------------------------------ dd with direct flag rm file crashed with an dio entry left in orphan dir clear OCFS2_VALID_FL in ocfs2_remove_inode recover N1 and read the corrupted inode, and set filesystem read-only So we skip the inode deletion this time and wait for dio entry recovered first. Signed-off-by: NJoseph Qi <joseph.qi@huawei.com> Reviewed-by: NMark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yiwen Jiang 提交于
The following case will lead to a lockres is freed but is still in use. cat /sys/kernel/debug/o2dlm/locking_state dlm_thread lockres_seq_start -> lock dlm->track_lock -> get resA resA->refs decrease to 0, call dlm_lockres_release, and wait for "cat" unlock. Although resA->refs is already set to 0, increase resA->refs, and then unlock lock dlm->track_lock -> list_del_init() -> unlock -> free resA In such a race case, invalid address access may occurs. So we should delete list res->tracking before resA->refs decrease to 0. Signed-off-by: NYiwen Jiang <jiangyiwen@huawei.com> Reviewed-by: NJoseph Qi <joseph.qi@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: NMark Fasheh <mfasheh@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tariq Saeed 提交于
This bug in mainline code is pointed out by Mark Fasheh. When ocfs2_iop_set_acl() and ocfs2_iop_get_acl() are entered from VFS layer, inode lock is not held. This seems to be regression from older kernels. The patch is to fix that. Orabug: 20189959 Signed-off-by: NTariq Saeed <tariq.x.saeed@oracle.com> Reviewed-by: NMark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tariq Saeed 提交于
PID: 614 TASK: ffff882a739da580 CPU: 3 COMMAND: "ocfs2dc" #0 [ffff882ecc3759b0] machine_kexec at ffffffff8103b35d #1 [ffff882ecc375a20] crash_kexec at ffffffff810b95b5 #2 [ffff882ecc375af0] oops_end at ffffffff815091d8 #3 [ffff882ecc375b20] die at ffffffff8101868b #4 [ffff882ecc375b50] do_trap at ffffffff81508bb0 #5 [ffff882ecc375ba0] do_invalid_op at ffffffff810165e5 #6 [ffff882ecc375c40] invalid_op at ffffffff815116fb [exception RIP: ocfs2_ci_checkpointed+208] RIP: ffffffffa0a7e940 RSP: ffff882ecc375cf0 RFLAGS: 00010002 RAX: 0000000000000001 RBX: 000000000000654b RCX: ffff8812dc83f1f8 RDX: 00000000000017d9 RSI: ffff8812dc83f1f8 RDI: ffffffffa0b2c318 RBP: ffff882ecc375d20 R8: ffff882ef6ecfa60 R9: ffff88301f272200 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffffffffff R13: ffff8812dc83f4f0 R14: 0000000000000000 R15: ffff8812dc83f1f8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff882ecc375d28] ocfs2_check_meta_downconvert at ffffffffa0a7edbd [ocfs2] #8 [ffff882ecc375d38] ocfs2_unblock_lock at ffffffffa0a84af8 [ocfs2] #9 [ffff882ecc375dc8] ocfs2_process_blocked_lock at ffffffffa0a85285 [ocfs2] #10 [ffff882ecc375e18] ocfs2_downconvert_thread_do_work at ffffffffa0a85445 [ocfs2] #11 [ffff882ecc375e68] ocfs2_downconvert_thread at ffffffffa0a854de [ocfs2] #12 [ffff882ecc375ee8] kthread at ffffffff81090da7 #13 [ffff882ecc375f48] kernel_thread_helper at ffffffff81511884 assert is tripped because the tran is not checkpointed and the lock level is PR. Some time ago, chmod command had been executed. As result, the following call chain left the inode cluster lock in PR state, latter on causing the assert. system_call_fastpath -> my_chmod -> sys_chmod -> sys_fchmodat -> notify_change -> ocfs2_setattr -> posix_acl_chmod -> ocfs2_iop_set_acl -> ocfs2_set_acl -> ocfs2_acl_set_mode Here is how. 1119 int ocfs2_setattr(struct dentry *dentry, struct iattr *attr) 1120 { 1247 ocfs2_inode_unlock(inode, 1); <<< WRONG thing to do. .. 1258 if (!status && attr->ia_valid & ATTR_MODE) { 1259 status = posix_acl_chmod(inode, inode->i_mode); 519 posix_acl_chmod(struct inode *inode, umode_t mode) 520 { .. 539 ret = inode->i_op->set_acl(inode, acl, ACL_TYPE_ACCESS); 287 int ocfs2_iop_set_acl(struct inode *inode, struct posix_acl *acl, ... 288 { 289 return ocfs2_set_acl(NULL, inode, NULL, type, acl, NULL, NULL); 224 int ocfs2_set_acl(handle_t *handle, 225 struct inode *inode, ... 231 { .. 252 ret = ocfs2_acl_set_mode(inode, di_bh, 253 handle, mode); 168 static int ocfs2_acl_set_mode(struct inode *inode, struct buffer_head ... 170 { 183 if (handle == NULL) { >>> BUG: inode lock not held in ex at this point <<< 184 handle = ocfs2_start_trans(OCFS2_SB(inode->i_sb), 185 OCFS2_INODE_UPDATE_CREDITS); ocfs2_setattr.#1247 we unlock and at #1259 call posix_acl_chmod. When we reach ocfs2_acl_set_mode.#181 and do trans, the inode cluster lock is not held in EX mode (it should be). How this could have happended? We are the lock master, were holding lock EX and have released it in ocfs2_setattr.#1247. Note that there are no holders of this lock at this point. Another node needs the lock in PR, and we downconvert from EX to PR. So the inode lock is PR when do the trans in ocfs2_acl_set_mode.#184. The trans stays in core (not flushed to disc). Now another node want the lock in EX, downconvert thread gets kicked (the one that tripped assert abovt), finds an unflushed trans but the lock is not EX (it is PR). If the lock was at EX, it would have flushed the trans ocfs2_ci_checkpointed -> ocfs2_start_checkpoint before downconverting (to NULL) for the request. ocfs2_setattr must not drop inode lock ex in this code path. If it does, takes it again before the trans, say in ocfs2_set_acl, another cluster node can get in between, execute another setattr, overwriting the one in progress on this node, resulting in a mode acl size combo that is a mix of the two. Orabug: 20189959 Signed-off-by: NTariq Saeed <tariq.x.saeed@oracle.com> Reviewed-by: NMark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Norton.Zhu 提交于
Currently error handling in dlm_request_join is a little obscure, so optimize it to promote readability. If packet.code is invalid, reset it to JOIN_DISALLOW to keep it meaningful. It only influences the log printing. Signed-off-by: NNorton.Zhu <norton.zhu@huawei.com> Cc: Srinivas Eeda <srinivas.eeda@oracle.com> Reviewed-by: NMark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yiwen Jiang 提交于
When running dirop_fileop_racer we found a case that inode can not removed. Two nodes, say Node A and Node B, mount the same ocfs2 volume. Create two dirs /race/1/ and /race/2/ in the filesystem. Node A Node B rm -r /race/2/ mv /race/1/ /race/2/ call ocfs2_unlink(), get the EX mode of /race/2/ wait for B unlock /race/2/ decrease i_nlink of /race/2/ to 0, and add inode of /race/2/ into orphan dir, unlock /race/2/ got EX mode of /race/2/. because /race/1/ is dir, so inc i_nlink of /race/2/ and update into disk, unlock /race/2/ because i_nlink of /race/2/ is not zero, this inode will always remain in orphan dir This patch fixes this case by test whether i_nlink of new dir is zero. Signed-off-by: NYiwen Jiang <jiangyiwen@huawei.com> Reviewed-by: NMark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Xue jiufei <xuejiufei@huawei.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-