So driver ioctls need a full auditing before we can make this change.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NZhenyu Wang <zhenyu.z.wang@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NZhenyu Wang <zhenyu.z.wang@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Commit 62c96b9d ("agp/intel: cleanup
some serious whitespace badness") didn't just fix whitespace.  It also
lost two lines.

Noticed by Linus. No more whitespace diffs for me.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

no more whitespace diffs for me.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NZhenyu Wang <zhenyu.z.wang@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds missing stolen memory size detect for IGD_GM, be sure to
detect right size as current X intel driver (2.3.2) which has already
worked out.
Signed-off-by: NZhenyu Wang <zhenyu.z.wang@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

According to the hw guys, you should use DSTCACHE_CTLSTAT to flush
the 2D dst cache rather than RB2D_DSTCACHE_CTLSTAT.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

Fixes performance drop after suspend/resume on some systems.
Signed-off-by: NDave Airlie <airlied@redhat.com>

AGP registers weren't programmed properly for r500 cards.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Texture uploads could hit the blitter coordinate limit, adjust the texture
offset when uploading the pieces. Make sure to check the end address of the
upload too.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This contains all the command buffer processing for the r500 cards.
It doesn't yet contain vblank support.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This inits the card pipes in the kernel and lets userspace getparam
the correct setup.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Cleanup do engine reset for different chip families.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

We only support RS480 (AMD based IGP) at the moment not
RS400 (Intel based IGP) ones.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

Docs state bits 4-11 maps to bits 32-39 of the 40-bit range
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds production microcode for r100->r500 from AMD.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Switch to using more correct pci dma mapping interfaces.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

Use boolean in AGP instead of having own TRUE/FALSE

--
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

besides it apparently being useful only in 2.6.24 (the changes in 2.6.25
really mean that it could be converted back to a single-stage mechanism),
I'm seeing an issue in Xen Dom0 kernels, which is caused by the calling
of gart_to_virt() in the second stage invocations of the destroy function.
I think that besides this being a real issue with Xen (where
unmap_page_from_agp() is not just a page table attribute change), this
also is invalid from a theoretical perspective: One should not assume that
gart_to_virt() is still valid after unmapping a page. So minimally (keeping
the 2-stage mechanism) a patch like the one below would be needed.

Jan
Signed-off-by: NDave Airlie <airlied@redhat.com>

add a new PCI ID and remove an old dodgy one, include the explaination
in the commented code so nobody readds later.

(davej also sent the pci id addition).
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

This enforces us to use the drm ioctl types so read/write works correctly and not believe
what userspace tells us.

It does this hopefully without breaking the drm api.

Fixes bug from thread: BUG: unable to handle kernel NULL pointer dereference (drm_getunique)
Signed-off-by: NDave Airlie <airlied@redhat.com>

More Kconfig tweaks related to the legacy PC RTC code:

 - Describe the legacy PC RTC driver as such ... it's never quite
   been clear that this driver is for PC RTCs, and now it's fair
   to call this the "legacy" driver.

 - Force it to understand about HPET stealing its IRQs ... kernel
   code does this always when HPET is in use, there should be no
   option for users to goof up the config.

This seems to fix kernel bugzilla #10729.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Several console keyboard maps are broken since

commit 04c71976
Author: Samuel Thibault <samuel.thibault@ens-lyon.org>
Date:   Tue Oct 16 23:27:04 2007 -0700

    unicode diacritics support

because that changeset made k_self consider the value as a latin1
character when in Unicode mode, which is wrong; k_self should still take
the console map into account.
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The generic nvram driver announces itself as
	'Macintosh non-volatile memory driver'
instead of 'Generic non-volatile memory driver'.  Fix that.
Signed-off-by: NPhilippe De Muyter <phdm@macqel.be>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since many distros load this driver by default (throw it against the wall
and see what sticks method).  Change the error message severity level to
avoid alarming users.  Isn't it annoying when users actually read the
error logs...
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Cc: Michael Buesch <mb@bu3sch.de>
Acked-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Addresses https://bugs.edge.launchpad.net/ubuntu/+source/linux-source-2.6.22/+bug/178634Signed-off-by: NAmit Kucheria <amit.kucheria@ubuntu.com>
Signed-off-by: Nmaximilian attems <max@stro.at>
Acked-by: NDave Airlie <airlied@linux.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Packet sending is driven by two flags, tx_ready and tx_queued.
It was possible, that there were queued data for sending and
hardware was flagged as blocked but in fact it was not.

The tx_queued was indicator but should be really a counter else
first fragmented packet resets tx_queued flag, but there may be
pending packets which do not get sent.

New semantics:
tx_ready - set, if hw is ready to send packet, no packet is being
           transferred right now
           set the flag right at the place where data are copied
           into hw memory and not earlier without checking if it
           was succesful
tx_queued - count of enqueued packets, including fragments
Tested-by: NMichal Rokos <michal.rokos@gmail.com>
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Lockdep says we can't take tasklist lock or sighand lock inside ctrl_lock.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Acked-by: NAlan Cox <alan@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Original report: """I used to force my console to black-on-white by the
command `setterm -inversescreen on`.  In 2.6.26-rc4, I get lots of black
background characters."""

Another addendum to commit c9e587ab.  This was previously missed out since
I was not aware of what vc_decscnm was for.
Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
Reported-by: <thunder7@xs4all.nl>
Tested-by: <thunder7@xs4all.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As commit 6089093e ("ip2: fix crashes on
load/unload") fixed the ip2 crashes on load/unload by making ip2/ip2main
one module (ip2), Kconfig shouldn't mention a now non-existing module.
Signed-off-by: NRoland.Kletzing <devzero@web.de>
Acked-by: NAlan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>