- 05 1月, 2010 3 次提交
-
-
由 James Smart 提交于
Fix NPIV operation errors: - Fix vport not logging out of fabric when being deleted - Fix vport fails to discover targets after devloss timeout. Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 James Smart 提交于
Fix FC protocol errors: - Fix multi-frame unsolicited sequences not queued properly - Fix frames for unsolicited sequences not being associated with sequence. - Fix unsolicited frame buffer sizes are not set properly - Fix Sequence count for unsolicited frame headers not byte swapped. - Fix Multi-frame sequence response frames go to wrong DID. Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Ed Lin 提交于
During a manual scan, a user can send command to a nonexistent lun, precisely at the point of max_lun. Normally it's possible (but not required) that the firmware has the knowledge that it is an invalid lun. In the particular case when max_lun is 256, however, the nonexistent lun 256 will be confused with lun 0, because the lun member in a request message is only u8, and 256 will become 0. So we need to fix the problem, at least, at the driver level. Signed-off-by: NEd Lin <ed.lin@promise.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 31 12月, 2009 7 次提交
-
-
由 Anil Ravindranath 提交于
For a particular driver error condition, driver was doing double scsi_dma_unmaps. Driver was calling scsi_dma_unmap in pmcraid_error_handler and return 0. This pmcraid_error_handler is called by pmcraid_io_done which will do scsi_dma_unmap again when it has return 0 from pmcraid_error_handler. Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Giridhar Malavali 提交于
Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Duane Grigsby 提交于
Added fundamental reset and pci save state. Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Andrew Vasquez 提交于
Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Anirban Chakraborty 提交于
Hold the hardware lock while do the response completion in work queue threads as it involves sharing a common request queue among multiple threads. Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Michael Hernandez 提交于
When the hba port gets logged out of the fabric, or other such transitional state when the physical link is still present, the driver doesn't receive a loop up asyn event (where the link data rate currently gets set). Hence send a explicit mailbox command to get the link rate in such conditions. Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Rakesh Ranjan 提交于
Fix a target login issue, when parent interface is vlan and we are using cxgb3i sepecific private ip address in '/etc/iscsi/ifaces/' iface file. Signed-off-by: NRakesh Ranjan <rakesh@chelsio.com> Acked-by: NKaren Xie <kxie@chelsio.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 25 12月, 2009 10 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-misc-2.6由 Linus Torvalds 提交于
* 'sysctl' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-misc-2.6: SYSCTL: Add a mutex to the page_alloc zone order sysctl SYSCTL: Print binary sysctl warnings (nearly) only once
-
git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6由 Linus Torvalds 提交于
* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: HWPOISON: Add PROC_FS dependency to hwpoison injector v2
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (34 commits) classmate-laptop: add support for Classmate PC ACPI devices hp-wmi: Fix two memleaks acer-wmi, msi-wmi: Remove needless DMI MODULE_ALIAS dell-wmi: do not keep driver loaded on unsupported boxes wmi: Free the allocated acpi objects through wmi_get_event_data drivers/platform/x86/acerhdf.c: check BIOS information whether it begins with string of table acerhdf: add new BIOS versions acerhdf: limit modalias matching to supported toshiba_acpi: convert to seq_file asus_acpi: convert to seq_file ACPI: do not select ACPI_DOCK from ATA_ACPI sony-laptop: enumerate rfkill devices using SN06 sony-laptop: rfkill support for newer models ACPI: fix OSC regression that caused aer and pciehp not to load MAINTAINERS: add maintainer for msi-wmi driver fujitu-laptop: fix tests of acpi_evaluate_integer() return value arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c: avoid cross-CPU interrupts by using smp_call_function_any() ACPI: processor: remove _PDC object list from struct acpi_processor ACPI: processor: change acpi_processor_set_pdc() interface ACPI: processor: open code acpi_processor_cleanup_pdc ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: ocfs2/trivial: Use le16_to_cpu for a disk value in xattr.c ocfs2/trivial: Use proper mask for 2 places in hearbeat.c Ocfs2: Let ocfs2 support fiemap for symlink and fast symlink. Ocfs2: Should ocfs2 support fiemap for S_IFDIR inode? ocfs2: Use FIEMAP_EXTENT_SHARED fiemap: Add new extent flag FIEMAP_EXTENT_SHARED ocfs2: replace u8 by __u8 in ocfs2_fs.h ocfs2: explicit declare uninitialized var in user_cluster_connect() ocfs2-devel: remove redundant OCFS2_MOUNT_POSIX_ACL check in ocfs2_get_acl_nolock() ocfs2: return -EAGAIN instead of EAGAIN in dlm ocfs2/cluster: Make fence method configurable - v2 ocfs2: Set MS_POSIXACL on remount ocfs2: Make acl use the default ocfs2: Always include ACL support
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: VIDEO: cyberpro: pci_request_regions needs a persistent name ARM: dma-isa: request cascade channel after registering it ARM: footbridge: trim down old ISA rtc setup ARM: fix PAGE_KERNEL ARM: Fix wrong shared bit for CPU write buffer bug test ARM: 5857/1: ARM: dmabounce: fix build ARM: 5856/1: Fix bug of uart0 platfrom data for nuc900 ARM: 5855/1: putc support for nuc900 ARM: 5854/1: fix compiling error for NUC900 ARM: 5849/1: ARMv7: fix Oprofile events count ARM: add missing include to nwflash.c ARM: Kill CONFIG_CPU_32 ARM: Convert VFP/Crunch/XscaleCP thread_release() to exit_thread() ARM: 5853/1: ARM: Fix build break on ARM v6 and v7
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: edac, pci: remove pesky debug printk amd64_edac: restrict PCI config space access amd64_edac: fix forcing module load/unload amd64_edac: make driver loading more robust amd64_edac: fix driver instance freeing amd64_edac: fix K8 chip select reporting
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* 'sh/for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Ensure all PG_dcache_dirty pages are written back. sh: mach-ecovec24: setup.c detailed correction serial: sh-sci: Convert tremaining ctrl_xxx I/O routines to __raw_xxx. serial: sh-sci: earlyprintk zero uartclk fix sh: Only use bl bit toggling for sleeping idle. sh: Restore bl bit toggling in idle loop. sh: Fix up MAX_DMA_CHANNELS definition when DMA is disabled. sh: dmaengine support for SH7785 sh: dmaengine support for sh7724.
-
由 Russell King 提交于
Don't pass a name pointer from the kernel stack, it will not survive and will result in corrupted /proc/iomem output. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
We can't request the cascade channel before it's been registered, so move it afterwards. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 24 12月, 2009 20 次提交
-
-
由 Russell King 提交于
This fixes a "start_kernel(): bug: interrupts were enabled early". rtc_cmos now takes care of initializing the ISA RTC and reading the current time and date from it; there's no need to repeat that here, thereby causing interrupts to be enabled too early. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
PAGE_KERNEL should not be executable; any area marked executable can be prefetched into the instruction cache. We don't want vmalloc areas to be read in this way. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Borislav Petkov 提交于
Do not spam the logs needlessly with the sole info that edac_pci_dev_parity_clear is being called. Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
-
由 Borislav Petkov 提交于
Do not access F2x19[0,4] on K8 since they're undefined there. Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
-
由 Borislav Petkov 提交于
Clear the override flag after force-loading the module. Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
-
由 Borislav Petkov 提交于
Currently, the module does not initialize fully when the DIMMs aren't ECC but remains still loaded. Propagate the error when no instance of the driver is properly initialized and prevent further loading. Reorganize and polish error handling in amd64_edac_init() while at it. Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
-
由 Borislav Petkov 提交于
Fix use-after-free errors by pushing all memory-freeing calls to the end of amd64_remove_one_instance(). Reported-by: NDarren Jenkins <darrenrjenkins@gmail.com> LKML-Reference: <1261370306.11354.52.camel@ICE-BOX> Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
-
由 Borislav Petkov 提交于
Fix the case when amd64_debug_display_dimm_sizes() reports only half the amount of DRAM on it because it doesn't account for when the single DCT operates in 128-bit mode and merges chip selects from different DIMMs. Reported-by: NJohannes Hirte <johannes.hirte@fem.tu-ilmenau.de> LKML-Reference: <200912112202.48173.johannes.hirte@fem.tu-ilmenau.de> Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
-
由 Len Brown 提交于
-
由 Len Brown 提交于
-
由 Len Brown 提交于
-
由 Len Brown 提交于
-
由 Len Brown 提交于
-
由 Len Brown 提交于
-
由 Len Brown 提交于
-
This add supports for devices like keyboard, backlight, tablet and accelerometer. This work is supported by International Syst S/A. [randy.dunlap@oracle.com: cmpc_acpi: depends on ACPI] [akpm@linux-foundation.org: readability tweaks] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Paul Mundt 提交于
-
由 Markus Pietrek 提交于
With some of the cache rework an address aliasing optimization was added, but this managed to fail on certain mappings resulting in pages with PG_dcache_dirty set never writing back their dcache lines. This patch reverts to the earlier behaviour of simply always writing back when the dirty bit is set. Signed-off-by: NMarkus Pietrek <Markus.Pietrek@emtrion.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
o remove unused define o add device name comment Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Thomas Renninger 提交于
Signed-off-by: NThomas Renninger <trenn@suse.de> Signed-off-by: NLen Brown <len.brown@intel.com>
-