- 30 12月, 2008 40 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Add registration for Pinnacle 80e ATSC tuner Register the em2874 based Pinnacle 80e device. Note that support for this device also requires the new drx-j driver (which is not available yet) Thanks for Ray Lu from Empia for providing the em2874 datasheet. Thanks to Joerg Schindler from Pinnacle for providing sample hardware. Thanks to Rainer Miethling from Pinnacle for providing engineering support. Signed-off-by: NDevin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Properly support capture start on em2874 The transport stream enable register moved in the em2874, so make it work properly. Thanks for Ray Lu from Empia for providing the em2874 datasheet. Signed-off-by: NDevin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Rework the logic so that the em28xx-alsa module does not get loaded for devices that don't support analog audio (such as the em2874) Signed-off-by: NDevin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Empia moved around their endpoint configuration in newer chips, so accommodate the changes Thanks for Ray Lu from Empia for providing the em2874 datasheet. Signed-off-by: NDevin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Fix case where we could end up dereferencing a NULL pointer if dev->vdev or dev->vbi_dev were not set properly. Signed-off-by: NDevin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Empia switched to a 16-bit addressable eeprom in newer devices. While we could certainly write a routine to read the eeprom, there is nothing of use in there that cannot be accessed through registers, and there is the risk that we could corrupt the eeprom (since a 16-bit read call is interpreted as a write call by 8-bit eeproms). So just be safe and bail out of the function. Thanks for Ray Lu from Empia for providing the em2874 datasheet. Signed-off-by: NDevin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Empia moved the location of the GPIO/GPO registers in newer devices. Add the ability to specify the relocated registers (including caching of register contents). Thanks for Ray Lu from Empia for providing the em2874 datasheet. Signed-off-by: NDevin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
When setting up the device, remember the chip id, so we can control behavior in the future without having to read the register continuously. Signed-off-by: NDevin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Add a EM28XX_NODECODER option to the list of available decoders. This option becomes important for devices that do not have analog support. Signed-off-by: NDevin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Remove unused variable from em28xx-audio.c Fix warning for unused "ret" variable Signed-off-by: NDevin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Add em2874 chip id Add chip id for em2874 to list of known chips Signed-off-by: NDevin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
video_ioctl2 lacks implementation of those two ioctls: - VIDIOC_ENUM_FRAMESIZES and VIDIOC_ENUM_FRAMEINTERVALS Adds implementation for those. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Darron Broad 提交于
This cleans-up MFE attachment for saa-7134 dvb devices. note: MFE is not fully implemented here yet. Signed-off-by: NDarron Broad <darron@kewl.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Darron Broad 提交于
This cleans-up MFE attachment for these cards plus two cases of potential memory leak on attachment failure. Signed-off-by: NDarron Broad <darron@kewl.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Failed requests will now generate a one-time warning message instead of the usual "Failed to query..." error, which should be more user-friendly. The driver will also recover automatically from failed GET_MIN/GET_MAX requests when the device is half-broken without requiring the MINMAX quirk (fully broken devices still need the quirk). Signed-off-by: NLaurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
According to http://bugzilla.kernel.org/show_bug.cgi?id=11997, the driver sn9c102 does not work for this webcam. Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
According to http://bugzilla.kernel.org/show_bug.cgi?id=11920, the driver sn9c102 does not work for this webcam. Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Frederic Cand 提交于
Signed-off-by: NFrederic Cand <frederic.cand@anevia.com> Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Alexey Klimov 提交于
Patch adds disabled controls in v4l2_queryctrl struct. Also version of driver corrected. -- Signed-off-by: NAlexey Klimov <klimov.linux@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Alexey Klimov 提交于
This patch adds support for suspend and resume methods in driver. Without this kradio and gnomeradio crashes during resume. Also .supports_autosuspend in usb_driver struct set equal to 0 to avoid suspending of module if usb_autosuspend enabled. Signed-off-by: NAlexey Klimov <klimov.linux@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Some recent patches added a few bad whitespaces. Remove that. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
The UVC specification does not require frame descriptors to be sorted by bFrameIndex. At least one camera (145f:013e) is known not to sort the descriptors properly, so they need to be sorted during parsing as the driver then accesses them by index. Signed-off-by: NLaurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Signed-off-by: NLaurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Signed-off-by: NLaurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
This patch fixes the bad picture at low resolution (320x240). Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
This patch - makes unuseful the temporary buffers - and also fixes the bad colors problem. Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Frederic Cand 提交于
Signed-off-by: NFrederic Cand <frederic.cand@anevia.com> Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
- The scan function must know about empty packets. - Packets starting with 0x80 must not be counted. - Wrong size of the translated frame. Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
- This flag is needed by some subdrivers as tv8532 for start of frame detection. Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
- usb_clear_halt() added in gspca and removed in finepix. Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
- This patch makes sonixb.c strife to different values during autoexposure for sif versus vga sensors. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Igor M. Liplianin 提交于
Add TerraTec Cinergy S USB support Signed-off-by: NIgor M. Liplianin <liplianin@me.by> Acked-by: NThorsten Leupold <th86@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-