Move SKB trim before we lookup the socket so we don't have to
put it on failure.

Based upon an initial patch by Jarek Poplawski and suggestions
from Herbert Xu.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The link may be up already via the chip's reset strapping, or though action
of U-Boot, or from the last time the interface was brought up.  Resetting
the link causes it to go down for several seconds.  This can significantly
increase the time from power-on to DHCP completion and a device being
accessible to the network.
Signed-off-by: NTrent Piepho <tpiepho@freescale.com>
Acked-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The init_phy() function attaches to the PHY, then configures the
SerDes<->TBI link (in SGMII mode).  The TBI is on the MDIO bus with the PHY
(sort of) and is accessed via the gianfar's MDIO registers, using the
functions gfar_local_mdio_read/write(), which don't do any locking.

The previously attached PHY will start a work-queue on a timer, and
probably an irq handler as well, which will talk to the PHY and thus use
the MDIO bus.  This uses phy_read/write(), which have locking, but not
against the gfar_local_mdio versions.

The result is that PHY code will try to use the MDIO bus at the same time
as the SerDes setup code, corrupting the transfers.

Setting up the SerDes before attaching to the PHY will insure that there is
no race between the SerDes code and *our* PHY, but doesn't fix everything.
Typically the PHYs for all gianfar devices are on the same MDIO bus, which
is associated with the first gianfar device.  This means that the first
gianfar's SerDes code could corrupt the MDIO transfers for a different
gianfar's PHY.

The lock used by phy_read/write() is contained in the mii_bus structure,
which is pointed to by the PHY.  This is difficult to access from the
gianfar drivers, as there is no link between a gianfar device and the
mii_bus which shares the same MDIO registers.  As far as the device layer
and drivers are concerned they are two unrelated devices (which happen to
share registers).

Generally all gianfar devices' PHYs will be on the bus associated with the
first gianfar.  But this might not be the case, so simply locking the
gianfar's PHY's mii bus might not lock the mii bus that the SerDes setup
code is going to use.

We solve this by having the code that creates the gianfar platform device
look in the device tree for an mdio device that shares the gianfar's
registers.  If one is found the ID of its platform device is saved in the
gianfar's platform data.

A new function in the gianfar mii code, gfar_get_miibus(), can use the bus
ID to search through the platform devices for a gianfar_mdio device with
the right ID.  The platform device's driver data is the mii_bus structure,
which the SerDes setup code can use to lock the current bus.
Signed-off-by: NTrent Piepho <tpiepho@freescale.com>
CC: Andy Fleming <afleming@freescale.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

When the at91_ether driver is using a GPIO for its PHY interrupt,
be sure to request (and later, if needed, free) that GPIO.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Acoording commit aa24886e,
dma_free_coherent() need irqs enabled.

This patch fix following warning messages:

WARNING: at linux/arch/x86/kernel/pci-dma.c:376 dma_free_coherent+0xaa/0xb0()

Call Trace:
 [<ffffffff8023f80f>] warn_on_slowpath+0x5f/0x90
 [<ffffffff80496ffa>] ? __kfree_skb+0x3a/0xa0
 [<ffffffff802a4723>] ? discard_slab+0x23/0x40
 [<ffffffff8021274a>] dma_free_coherent+0xaa/0xb0
 [<ffffffff8043668f>] amd8111e_close+0x10f/0x1b0
 [<ffffffff8049f3ae>] dev_close+0x5e/0xb0
 [<ffffffff8049efa1>] dev_change_flags+0xa1/0x1e0
 [<ffffffff806b2171>] ic_close_devs+0x36/0x4e
 [<ffffffff806b29ee>] ip_auto_config+0x581/0x10f3
 [<ffffffff803a6e19>] ? kobject_add+0x69/0x90
 [<ffffffff803a698a>] ? kobject_get+0x1a/0x30
 [<ffffffff803a785b>] ? kobject_uevent+0xb/0x10
 [<ffffffff803a6c62>] ? kset_register+0x52/0x60
 [<ffffffff803a6f9b>] ? kset_create_and_add+0x6b/0xa0
 [<ffffffff804e2e74>] ? tcp_ca_find+0x24/0x50
 [<ffffffff806b246d>] ? ip_auto_config+0x0/0x10f3
 [<ffffffff8020903c>] _stext+0x3c/0x150
 [<ffffffff802772d3>] ? register_irq_proc+0xd3/0xf0
 [<ffffffff802f0000>] ? mb_cache_create+0x80/0x1f0
 [<ffffffff80688693>] kernel_init+0x141/0x1b8
 [<ffffffff80688552>] ? kernel_init+0x0/0x1b8
 [<ffffffff8020d609>] child_rip+0xa/0x11
 [<ffffffff80688552>] ? kernel_init+0x0/0x1b8
 [<ffffffff80688552>] ? kernel_init+0x0/0x1b8
 [<ffffffff8020d5ff>] ? child_rip+0x0/0x11
Signed-off-by: NChunbo Luo <chunbo.luo@windriver.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Commit 401c0aab introduced a regression
in the atl1 driver by storing the VLAN tag in the wrong TX descriptor
field.

This patch causes the VLAN tag to be stored in its proper location.
Tested-by: NRamon Casellas <ramon.casellas@cttc.es>
Signed-off-by: NJay Cliburn <jacliburn@bellsouth.net>
Cc: stable@kernel.org
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Use mmiowb() to ensure "stop" and "go" commands are sent in order on ia64.
Signed-off-by: NBrice Goglin <brice@myri.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

A panic was discovered with bonding when using mode 5 or 6 and trying to
remove the slaves from the bond after the interface was taken down.
When calling 'ifconfig bond0 down' the following happens:

    bond_close()
        bond_alb_deinitialize()
            tlb_deinitialize()
		kfree(bond_info->tx_hashtbl)
                bond_info->tx_hashtbl = NULL

Unfortunately if there are still slaves in the bond, when removing the
module the following happens:

    bonding_exit()
        bond_free_all()
            bond_release_all()
                bond_alb_deinit_slave()
                    tlb_clear_slave()
                        tx_hash_table = BOND_ALB_INFO(bond).tx_hashtbl
			u32 next_index = tx_hash_table[index].next

As you might guess we panic when trying to access a few entries into the
table that no longer exists.

I experimented with several options (like moving the calls to
tlb_deinitialize somewhere else), but it really makes the most sense to
be part of the bond_close routine.  It also didn't seem logical move
tlb_clear_slave around too much, so the simplest option seems to add a
check in tlb_clear_slave to make sure we haven't already wiped the
tx_hashtbl away before searching for all the non-existent hash-table
entries that used to point to the slave as the output interface.
Signed-off-by: NAndy Gospodarek <andy@greyhouse.net>
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch reworks the resource free logic performed at the time
a bonding device is released.  This (a) closes two resource leaks, one
for workqueues and one for multicast lists, and (b) improves commonality
of code between the "destroy one" and "destroy all" paths by performing
final free activity via destructor instead of explicitly (and differently)
in each path.

"Sean E. Millichamp" <sean@bruenor.org> reported the workqueue
leak, and included a different patch.
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

During the rework of the mii monitor for:

  commit f0c76d61
  Author: Jay Vosburgh <fubar@us.ibm.com>
  Date:   Wed Jul 2 18:21:58 2008 -0700

    bonding: refactor mii monitor

I left out the increment of the link failure counter.  This
patch corrects that omission.
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

* 'for-linus' of git://neil.brown.name/md:
  md: destroy partitions and notify udev when md array is stopped.

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  lguest: fix irq vectors.
  lguest: fix early_ioremap.
  lguest: fix example launcher compile after moved asm-x86 dir.

Merge branch 'x86-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: cpu_index build fix
  x86/voyager: fix missing cpu_index initialisation
  x86/voyager: fix compile breakage caused by dc1e35c6
  x86: fix /dev/mem mmap breakage when PAT is disabled
  x86/voyager: fix compile breakage casued by x86: move prefill_possible_map calling early
  x86: use CONFIG_X86_SMP instead of CONFIG_SMP
  x86/voyager: fix boot breakage caused by x86: boot secondary cpus through initial_code
  x86, uv: fix compile error in uv_hub.h
  i386/PAE: fix pud_page()
  x86: remove debug code from arch_add_memory()
  x86: start annotating early ioremap pointers with __iomem
  x86: two trivial sparse annotations
  x86: fix init_memory_mapping for [dc000000 - e0000000) - v2

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: remove sched-design.txt from 00-INDEX
  sched: change sched_debug's mode to 0444

Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ftrace: handle archs that do not support irqs_disabled_flags

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  resources: fix x86info results ioremap.c:226 __ioremap_caller+0xf2/0x2d6() WARNINGs

	do_IRQ: cannot handle IRQ -1 vector 0x20 cpu 0
	------------[ cut here ]------------
	kernel BUG at arch/x86/kernel/irq_32.c:219!

We're not ISA: we have a 1:1 mapping from vectors to irqs.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

dmi_scan_machine breaks under lguest:
	lguest: unhandled trap 14 at 0xc04edeae (0xffa00000)

This is because we use current_cr3 for the read_cr3() paravirt
function, and it isn't set until the first cr3 change.  We got away
with it until this happened.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

fix:

 arch/x86/kernel/cpu/common.c: In function 'early_identify_cpu':
 arch/x86/kernel/cpu/common.c:553: error: 'struct cpuinfo_x86' has no member named 'cpu_index'

as cpu_index is only available on SMP.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix /proc/cpuinfo output on x86/Voyager

Ever since

| commit 92cb7612
| Author: Mike Travis <travis@sgi.com>
| Date:   Fri Oct 19 20:35:04 2007 +0200
|
|     x86: convert cpuinfo_x86 array to a per_cpu array

We've had an extra field in cpuinfo_x86 which is cpu_index.
Unfortunately, voyager has never initialised this, although the only
noticeable impact seems to be that /proc/cpuinfo shows all zeros for
the processor ids.

Anyway, fix this by initialising the boot CPU properly and setting the
index when the secondaries update.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: build fix on x86/Voyager

Given commits like this:

| Author: Suresh Siddha <suresh.b.siddha@intel.com>
| Date:   Tue Jul 29 10:29:19 2008 -0700
|
|     x86, xsave: enable xsave/xrstor on cpus with xsave support

Which deliberately expose boot cpu dependence to pieces of the system,
I think it's time to explicitly have a variable for it to prevent this
continual misassumption that the boot CPU is zero.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5326/1: AFEB9260: Fix for i2c_board_info structure
  [ARM] mx31ads: Add missing include
  [ARM] MXC: Fix mxc_gpio_get(), which must read PSR register instead DR.
  [ARM] MX3: Use ioremap wrapper to map SoC devices nonshared
  [ARM] gpio_free might sleep, arm architecture
  [ARM] ep93xx: fix OHCI DMA mask
  leds: da903x: (da9030 only) led brightness reversed.
  [ARM] sharpsl_pm: fix compilation w/o CONFIG_PM
  [ARM] pcm037: map AIPS1 and AIPS2 as nonshared area
  [ARM] build fixes for netX serial driver
  [ARM] 5323/1: Remove outdated empeg documentation.
  [ARM] 5299/1: Add maintainer for Mobilepro 900/c
  [ARM] corgi_lcd: fix simultaneous compilation with corgi_bl
  [ARM] pxa/spitz: fix spi cs on spitz
  [ARM] 5322/1: Fix fastpath issue in mmci.c
  [ARM] xsc3: revert writethrough memory-type encoding change

Impact: build fix on non-lockdep architectures

Some architectures do not support a way to read the irq flags that
is set from "local_irq_save(flags)" to determine if interrupts were
disabled or enabled. Ftrace uses this information to display to the user
if the trace occurred with interrupts enabled or disabled.

Besides the fact that those archs that do not support this will fail to
compile, unless they fix it, we do not want to have the trace simply
say interrupts were not disabled or they were enabled, without knowing
the real answer.

This patch adds a 'X' in the output to let the user know that the
architecture they are running on does not support a way for the tracer
to determine if interrupts were enabled or disabled. It also lets those
same archs compile with tracing enabled.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: allow /dev/mem mmaps on non-PAT CPUs/platforms

Fix mmap to /dev/mem when CONFIG_X86_PAT is off and CONFIG_STRICT_DEVMEM is
off

mmap to /dev/mem on kernel memory has been failing since the
introduction of PAT (CONFIG_STRICT_DEVMEM=n case).   Seems like
the check to avoid cache aliasing with PAT is kicking in even
when PAT is disabled. The bug seems to have crept in 2.6.26.

This patch makes sure that the mmap to regular
kernel memory succeeds if CONFIG_STRICT_DEVMEM=n and
PAT is disabled, and the checks to avoid cache aliasing
still happens if PAT is enabled.
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Tested-by: NTim Sirianni <tim@scalemp.com>
Cc: <stable@kernel.org>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix build failure on x86/Voyager

Before:

| commit 329513a3
| Author: Yinghai Lu <yhlu.kernel@gmail.com>
| Date:   Wed Jul 2 18:54:40 2008 -0700
|
|     x86: move prefill_possible_map calling early

prefill_possible_mask() was hidden under CONFIG_HOTPLUG_CPU rendering
it invisitble to voyager.  Since this commit it's exposed, but not
provided by the voyager subarch, so add a dummy stub to fix the link
breakage.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix x86/Voyager boot

CONFIG_SMP is used for features which work on *all* x86 boxes.
CONFIG_X86_SMP is used for standard PC like x86 boxes (for things like
multi core and apics)
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: boot up secondary CPUs as well on x86/Voyager systems

This commit:

| commit 3e970473
| Author: Glauber Costa <gcosta@redhat.com>
| Date:   Wed May 28 13:01:54 2008 -0300
|
|     x86: boot secondary cpus through initial_code

removed the use of initialize_secondary.  However, it didn't update
voyager, so the secondary cpus no longer boot.  Fix this by adding the
initial_code switch to voyager as well.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Glauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  Fix incompatibility with versions of Perl less than 5.6.0
  kbuild: do not include arch/<ARCH>/include/asm in find-sources twice.
  kbuild: tag with git revision when git describe is missing
  kbuild: prevent modpost from looking for a .cmd file for a static library linked into a module
  kbuild: fix KBUILD_EXTRA_SYMBOLS
  adjust init section definitions
  scripts/checksyscalls.sh: fix for non-gnu sed
  scripts/package: don't break if %{_smp_mflags} isn't set
  kbuild: setlocalversion: dont include svn change count
  kbuild: improve check-symlink
  kbuild: mkspec - fix build rpm

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [PATCH] Switch all my contributions stuff to a single common address
  [WATCHDOG] pci: use pci_ioremap_bar() in drivers/watchdog

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  CHAR: Delete old and now unused M48T35 RTC driver for SGI IP27.
  CHAR: Delete old and now unused DS1286 driver.
  MIPS: Sort out CPU type to name translation.
  MIPS: Use the new byteorder headers
  MIPS: Probe for watch registers on cores of all vendors, not just MTI.
  MIPS: Switch FPU emulator trap to BREAK instruction.
  MIPS: SMP: Do not initialize __cpu_number_map/__cpu_logical_map for CPU 0.
  MIPS: Consider value of c0_ebase when computing value of exception base.
  MIPS: Clean up MIPSxx-optimized bitop functions
  MIPS: New feature test macro cpu_has_mips_r
  MIPS: RBTX4927: Add GPIO-LED support
  MIPS: TXx9: Fix RBTX4939 ethernet address initialization

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  fdomain_cs: Sort out modules with duplicate description
  pcmcia: Whine harder about use of EXCLUSIVE
  pcmcia: IRQ_TYPE_EXCLUSIVE is long obsoleted

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  SUNRPC: Fix potential race in put_rpccred()
  SUNRPC: Fix rpcauth_prune_expired
  NFS: Convert nfs_attr_generation_counter into an atomic_long
  SUNRPC: Respond promptly to server TCP resets

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, gart: fix gart detection for Fam11h CPUs
  x86: 64 bit print out absent pages num too
  x86, kdump: fix invalid access on i386 sparsemem
  x86: fix APIC_DEBUG with inquire_remote_apic
  x86: AMD microcode patch loader author update
  x86: microcode patch loader author update
  mailmap: add Peter Oruba
  x86, bts: improve help text for BTS config
  doc/x86: fix doc subdirs

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm snapshot: wait for chunks in destructor
  dm snapshot: fix register_snapshot deadlock
  dm raid1: fix do_failures

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  x86/PCI: build failure at x86/kernel/pci-dma.c with !CONFIG_PCI

When we close we must clear the extra reference we got when we read
port->tty. Setting the port tty NULL will clear the kref held by the driver
but not the one we obtained ourselves while doing the lookup.
Signed-off-by: NAlan Cox <alan@redhat.com>
Tested-by: NHelge Hafting <helge.hafting@aitel.hist.no>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>