Add check for 970GX for __cpu_preinit_ppc970.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

On CHRP platforms with only a 8259 controller, we should set the
default IRQ host to the 8259 driver's one for the IRQ probing
fallbacks to work in case the IRQ tree is incorrect (like on
Pegasos for example). Without this fix, we get a bunch of WARN_ON's
during boot.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This causes ipic_set_irq_type to set the handler directly rather
than call set_irq_handler, which causes spinlock recursion because
the lock is already held when ipic_set_irq_type is called.

I'm also not convinced that ipic_set_irq_type should be changing the
handler at all.  There seem to be several controllers that don't and
several that do.  Those that do would break what appears to be a common
usage of calling set_irq_chip_and_handler followed by set_irq_type, if a
non-standard handler were to be used.  OTOH, irq_create_of_mapping()
doesn't set the handler, but only calls set_irq_type().

This patch gets things working in the spinlock-debugging-enabled case,
but I'm curious as to where the handler setting is ideally supposed to be
done.  I don't see any documentation on set_irq_type() that clarifies
what the semantics are supposed to be.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

MPC8323EMDS board ethernet interface with RMII uses the CLK16 divisor
for the rx and tx clock, but the ucc_set_qe_mux_rxtx() function doesn't
handle the CLK16 setting of the CMXUCR3 and CMXUCR4 registers.  This
fixes it.
Signed-off-by: NDave Liu <daveliu@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

===================================================================
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Currently, spufs_mbox_read transfers more bytes than requested on a
read.  If you ask for four bytes, you get eight.  This fixes it to
transfer the largest multiple of four bytes that is less than or equal
to the number you asked for.

Note: one nasty property of this file in spufs is that you can only
read multiples of four bytes in the first place, since there is no way
to atomically put back a few bytes into the hardware register.  Thus,
reading less than four bytes returns -EINVAL.  Asking for more than
four returns the largest possible multiple of four.
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This fixes the /signal2 file to actually give signal2 data.
Signed-off-by: NDwayne Grant Mcconnell <decimal@us.ibm.com>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Fix a const'ification related warning with device_is_compatible()
and friends related to get_property() not properly having const
on it's input device node argument.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The Cell CPU timebase has an erratum. When reading the entire 64 bits
of the timebase with one mftb instruction, there is a handful of cycles
window during which one might read a value with the low order 32 bits
already reset to 0x00000000 but the high order bits not yet incremeted
by one. This fixes it by reading the timebase again until the low order
32 bits is no longer 0. That might introduce occasional latencies if
hitting mftb just at the wrong time, but no more than 70ns on a cell
blade, and that was considered acceptable.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch adds support for feature fixups in modules. This involves
adding support for R_PPC64_REL64 relocs to the 64 bits module loader.
It also modifies modpost.c to ignore the powerpc fixup sections (or it
would warn when used in .init.text).
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch reworks the feature fixup mecanism so vdso's can be fixed up.
The main issue was that the construct:

        .long   label  (or .llong on 64 bits)

will not work in the case of a shared library like the vdso. It will
generate an empty placeholder in the fixup table along with a reloc,
which is not something we can deal with in the vdso.

The idea here (thanks Alan Modra !) is to instead use something like:

1:
        .long   label - 1b

That is, the feature fixup tables no longer contain addresses of bits of
code to patch, but offsets of such code from the fixup table entry
itself. That is properly resolved by ld when building the .so's. I've
modified the fixup mecanism generically to use that method for the rest
of the kernel as well.

Another trick is that the 32 bits vDSO included in the 64 bits kernel
need to have a table in the 64 bits format. However, gas does not
support 32 bits code with a statement of the form:

        .llong  label - 1b  (Or even just .llong label)

That is, it cannot emit the right fixup/relocation for the linker to use
to assign a 32 bits address to an .llong field. Thus, in the specific
case of the 32 bits vdso built as part of the 64 bits kernel, we are
using a modified macro that generates:

        .long   0xffffffff
        .llong  label - 1b

Note that is assumes that the value is negative which is enforced by
the .lds (those offsets are always negative as the .text is always
before the fixup table and gas doesn't support emiting the reloc the
other way around).
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch adds some macros that can be used with an explicit label in
order to nest cpu features. This should be used very careful but is
necessary for the upcoming cell TB fixup.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

There are currently two versions of the functions for applying the
feature fixups, one for CPU features and one for firmware features. In
addition, they are both in assembly and with separate implementations
for 32 and 64 bits. identify_cpu() is also implemented in assembly and
separately for 32 and 64 bits.

This patch replaces them with a pair of C functions. The call sites are
slightly moved on ppc64 as well to be called from C instead of from
assembly, though it's a very small change, and thus shouldn't cause any
problem.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Quick fix for lack of memset(__bss_start, 0, _end-__bss_start) in
load_kernel().  If edata is unaligned, the loop will overwrite all
memory because r3 and r4 will never be equal.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

In ucc_fast.c and ucc_slow.c, "illegal" is twice spelled "illagal".
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Don't require that the wrapper script be executable when building
zImage.initrds.  This has already been fixed for zImages.
Signed-off-by: NMark A. Greer <mgreer@mvista.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

970GX cputable entry from Steve Winiecki.
Signed-off-by: NJake Moilanen <moilanen@austin.ibm.com>

 arch/powerpc/kernel/cputable.c          |   15 +++++++++++++++
 arch/powerpc/oprofile/op_model_power4.c |    2 +-
 include/asm-powerpc/reg.h               |    1 +
 3 files changed, 17 insertions(+), 1 deletion(-)
Signed-off-by: NPaul Mackerras <paulus@samba.org>

low_cpu_die is called from the CPU hotplug code on 32-bit powermacs,
but it is only defined if CONFIG_PM || CONFIG_CPU_FREQ_PMAC.  This
changes the ifdef so it is defined for CONFIG_HOTPLUG_CPU on 32-bit
machines.
Signed-off-by: NSrinivasa DS <srinivasa@in.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This fixes the warning message from the return value of function
get_property(), by making sure that the variable that receives the
value is marked as const.
Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com>

--
Signed-off-by: NPaul Mackerras <paulus@samba.org>

In calculating stolen time, we were trying to actually account for time
spent in the hypervisor.  We don't really have enough information to do
that accurately, so don't try.  Instead, we now calculate stolen time as
time that the current cpu thread is not actually dispatching instructions.
On chips without a PURR, we cannot do this, so stolen time will always
be zero.  On chips with a PURR, this is merely the difference between
the elapsed PURR values and the elapsed TB values.

This gives us much more sane vaules from tools such as mpstat, even if
they are still a bit strange e.g. 2 busy threads on one cpu will both
appear to have 50% user time and 50% stolen time while 1 busy thread on
a cpu will look like 100% user on one of them and 100% idle on the other.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6:
  [PATCH] x86-64: increase PHB1 split transaction timeout
  [PATCH] x86-64: Fix C3 timer test

This patch increases the timeout for PCI split transactions on PHB1 on
the first Calgary to work around an issue with the aic94xx
adapter. Fixes kernel.org bugzilla #7180
(http://bugzilla.kernel.org/show_bug.cgi?id=7180)

Based on excellent debugging and a patch by Darrick J. Wong
<djwong@us.ibm.com>
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>
Signed-off-by: NAndi Kleen <ak@suse.de>
Acked-by: NDarrick J. Wong <djwong@us.ibm.com>

There was a typo in the C3 latency test to decide of the TSC
should be used or not. It used the C2 latency threshold, not the
C3 one. Fix that.

This should fix the time on various dual core laptops.
Signed-off-by: NAndi Kleen <ak@suse.de>

The current implementation uses a sequence of a cacheflush and a copy.
This is racy in case of a multithreaded debuggee and renders GDB
virtually unusable.

Aside this fixes a performance hog rendering access to /proc/cmdline very
slow and resulting in a enough cache stalls for the 34K AP/SP programming
model to make the bare metal code on the non-Linux VPE miss RT deadlines.

The main part of this patch was originally written by Ralf Baechle;
Atushi Nemoto did the the debugging.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Noticed by Samium Gromoff but his patch got stale in flight ...
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [PATCH] libata-sff: Allow for wacky systems
  [PATCH] ahci: readability tweak
  [PATCH] libata: typo fix
  [PATCH] ATA must depend on BLOCK
  [PATCH] libata: use correct map_db values for ICH8

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (22 commits)
  [PATCH] ibmveth: Fix index increment calculation
  [PATCH] Fix timer race
  [PATCH] Remove useless comment from sb1250
  [PATCH] ucc_geth: changes to ucc_geth driver as a result of qe_lib changes and bugfixes
  [PATCH] sky2: 88E803X transmit lockup
  [PATCH] e1000: Reset all functions after a PCI error
  [PATCH] WAN/pc300: handle, propagate minor errors
  [PATCH] Update smc91x driver with ARM Versatile board info
  [PATCH] wireless: WE-20 compatibility for ESSID and NICKN ioctls
  [PATCH] zd1211rw: fix build-break caused by association race fix
  [PATCH] sotftmac: fix a slab corruption in WEP restricted key association
  [PATCH] airo: check if need to freeze
  [PATCH] wireless: More WE-21 potential overflows...
  [PATCH] zd1201: Possible NULL dereference
  [PATCH] orinoco: fix WE-21 buffer overflow
  [PATCH] airo.c: check returned values
  [PATCH] bcm43xx-softmac: Fix system hang for x86-64 with >1GB RAM
  [PATCH] bcm43xx-softmac: check returned value from pci_enable_device
  [PATCH] softmac: Fix WX and association related races
  [PATCH] bcm43xx: fix race condition in periodic work handler
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart:
  [AGPGART] uninorth: Add module param 'aperture' for aperture size

* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6:
  [PATCH] x86-64: Revert timer routing behaviour back to 2.6.16 state
  [PATCH] x86-64: Overlapping program headers in physical addr space fix
  [PATCH] x86-64: Put more than one cpu in TARGET_CPUS
  [PATCH] x86: Revert new unwind kernel stack termination
  [PATCH] x86-64: Use irq_domain in ioapic_retrigger_irq
  [PATCH] i386: Disable nmi watchdog on all ThinkPads
  [PATCH] x86-64: Revert interrupt backlink changes
  [PATCH] x86-64: Fix ENOSYS in system call tracing
  [PATCH] i386: Fix fake return address
  [PATCH] x86-64: x86_64 add NX mask for PTE entry
  [PATCH] x86-64: Speed up dwarf2 unwinder
  [PATCH] x86: Use -maccumulate-outgoing-args
  [PATCH] x86-64: fix page align in e820 allocator
  [PATCH] x86-64: Fix for arch/x86_64/pci/Makefile CFLAGS
  [PATCH] i386: fix .cfi_signal_frame copy-n-paste error
  [PATCH] x86-64: typo in __assign_irq_vector when updating pos for vector and offset
  [PATCH] x86-64: x86_64 hot-add memory srat.c fix
  [PATCH] i386: Update defconfig
  [PATCH] x86-64: Update defconfig

If someone has renamed a directory on the server, triggering the d_move
code in d_materialise_unique(), then we need to invalidate the cached
directory information in the source parent directory.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Maneesh Soni <maneesh@in.ibm.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If the caller tries to instantiate a directory using an inode that already
has a dentry alias, then we attempt to rename the existing dentry instead
of instantiating a new one.  Fail with an ELOOP error if the rename would
affect one of our parent directories.

This behaviour is needed in order to avoid issues such as

  http://bugzilla.kernel.org/show_bug.cgi?id=7178Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Maneesh Soni <maneesh@in.ibm.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

CCISS was producing warnings about shifts being greater than the size of
the type and pointers being of incompatible type.  Turns out this is
because it's calling do_div on a 32-bit quantity.  Upon further
investigation, the sector_t total_size is being assigned to an int, and
then we're calling do_div on that int.  Obviously, sector_div is called for
here, and I took the chance to refactor the code a little.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Acked-by: NMike Miller <mike.miller@hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Just like everyone else.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Mistyped an ifdef CONFIG_CPUSETS - fixed.

I doubt that anyone ever noticed.  The impact of this typo was
that if someone:
 1) was using MPOL_BIND to force off node allocations
 2) while using cpusets to constrain memory placement
 3) when that cpuset was migrating that jobs memory
 4) while the tasks in that job were actively forking
then there was a rare chance that future allocations using
that MPOL_BIND policy would be node local, not off node.
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The zonelist may contain zones of nodes that have not been bootstrapped and
we will oops if we try to allocate from those zones.  So check if the node
information for the slab and the node have been setup before attempting an
allocation.  If it has not been setup then skip that zone.

Usually we will not encounter this situation since the slab bootstrap code
avoids falling back before we have setup the respective nodes but we seem
to have a special needs for pppc.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Acked-by: NAndy Whitcroft <apw@shadowen.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Kravetz <kravetz@us.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Acked-by: NWill Schmidt <will_schmidt@vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Reintroduce NODES_SPAN_OTHER_NODES for powerpc

Revert "[PATCH] Remove SPAN_OTHER_NODES config definition"
    This reverts commit f62859bb.
Revert "[PATCH] mm: remove arch independent NODES_SPAN_OTHER_NODES"
    This reverts commit a94b3ab7.

Also update the comments to indicate that this is still required
and where its used.
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Kravetz <kravetz@us.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Acked-by: NWill Schmidt <will_schmidt@vnet.ibm.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The recent commit 751ae21c introduced a bug
in the producer/consumer index calculation in the ibmveth driver -
incautious use of the post-increment ++ operator resulted in an increment
being immediately reverted.  This patch corrects the logic.

Without this patch, the driver oopses almost immediately after activation
on at least some machines.
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Acked-by: NSantiago Leon <santil@us.ibm.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We seem to have lost the declaration of pci_get_device_reverse(), if we ever
had one.

Add a CONFIG_PCI=0 stub too.
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I have an acpi_pm that goes backwards, but it's not intel.  I tested the
verified read and my acpi_pm started to function properly.  So I added it
to the greylist.  I'm assuming that's the right spot.

I also added an unlikely() to the while, cause it seems appropriate.
Signed-off-by: NDaniel Walker <dwalker@mvista.com>
Acked-by: NJohn Stultz <johnstul@us.ibm.com>
Acked-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

And a couple of bug fixes found by sparse.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>