This patch fixes the following checkpatch.pl warning in p80211netdev.h:
WARNING: do not add new typedefs

It applies for typedef netdevice_t
Signed-off-by: NSergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Example corrected output:

    $ pwd
    /sys/bus/visorbus/devices/visorbus1
    $ cat client_bus_info
    Client device / client driver info for s-Par Console partition
							 (vbus #1):
       chipset         visorchipset    kernel ver. 4.8.0-rc6-ARCH+
       clientbus       visorbus        kernel ver. 4.8.0-rc6-ARCH+
    [2]keyboard        visorinput      kernel ver. 4.8.0-rc6-ARCH+
    [3]mouse           visorinput      kernel ver. 4.8.0-rc6-ARCH+

    $ cat ../visorbus2/client_bus_info
    Client device / client driver info for s-Par IOVM partition
						         (vbus #2):
       chipset         visorchipset    kernel ver. 4.8.0-rc6-ARCH+
       clientbus       visorbus        kernel ver. 4.8.0-rc6-ARCH+
    [0]ultravnic       visornic        kernel ver. 4.8.0-rc6-ARCH+
    [1]ultravnic       visornic        kernel ver. 4.8.0-rc6-ARCH+
    [2]sparvhba        visorhba        kernel ver. 4.8.0-rc6-ARCH+
Signed-off-by: NTim Sell <Timothy.Sell@unisys.com>
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Previously, the lines describing devices controlled by the visorinput,
visornic, and visorhba drivers (keyboard, mouse, ultravnic, sparvhba) would
be missing from the vbus channel header.  This is important info that is
collected as part of s-Par livedumps, and can be examined via
/sys/bus/visorbus/devices/visorbus<n>/client_bus_info, e.g.:

    $ pwd
    /sys/bus/visorbus/devices
    $ cat visorbus1/client_bus_info
    Client device / client driver info for s-Par Console eartition
                                                 (vbus #4294967295):
       chipset         visorchipset    kernel ver. 4.8.0-rc6-ARCH+
       clientbus       visorbus        kernel ver. 4.8.0-rc6-ARCH+
 -> [2]keyboard        visorinput      kernel ver. 4.8.0-rc6-ARCH+
 -> [3]mouse           visorinput      kernel ver. 4.8.0-rc6-ARCH+

    $ cat visorbus2/client_bus_info
    Client device / client driver info for s-Par IOVM eartition
                                                 (vbus #4294967295):
       chipset         visorchipset    kernel ver. 4.8.0-rc6-ARCH+
       clientbus       visorbus        kernel ver. 4.8.0-rc6-ARCH+
 -> [0]ultravnic       visornic        kernel ver. 4.8.0-rc6-ARCH+
 -> [1]ultravnic       visornic        kernel ver. 4.8.0-rc6-ARCH+
 -> [2]sparvhba        visorhba        kernel ver. 4.8.0-rc6-ARCH+
Signed-off-by: NTim Sell <Timothy.Sell@unisys.com>
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Several implicit unsigned --> signed int conversions were corrected.
No runtime effects were observed here, nevertheless implicit conversions
between integral types can lead to unexpected behavior.
Signed-off-by: NTim Sell <Timothy.Sell@unisys.com>
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

An "unnecessary" 'else' was removed due to complains from checkpatch.pl
as it is preceded by a 'return', however the 'else' branch is necessary
as an earlier branch of the 'if' falls through. By removing the 'else',
that route now hits the 'break' and the 'while' loop exits prematurely.

This commit reverts that change and puts the original 'else' back in
place.
Signed-off-by: NMatthew Kilgore <mattkilgore12@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace data type with pointer of same type in sizeof() to resolve
checkpatch issue.
Signed-off-by: NNamrata A Shettar <namrataashettar@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add space around binary operators to resolve checkpatch issue.
Signed-off-by: NNamrata A Shettar <namrataashettar@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the following whitespace issue:

CHECK: spaces preferred around that '*' (ctx:VxV)
FILE: drivers/staging/android/ion/ion_of.c:91:
+                            sizeof(struct ion_platform_heap)*num_heaps,
Signed-off-by: NYannis Damigos <giannis.damigos@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the following blank line issues:

CHECK: Please don't use multiple blank lines

CHECK: Please use a blank line after function/struct/union/enum declarations
+}
+RESERVEDMEM_OF_DECLARE(ion, "ion-region", rmem_ion_setup);
Signed-off-by: NYannis Damigos <giannis.damigos@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the following whitespace issues:

CHECK: Alignment should match open parenthesis
+	pr_info("%s: id %d type %d name %s align %lx\n", __func__,
+			heap->id, heap->type, heap->name, heap->align);

CHECK: Alignment should match open parenthesis
+struct ion_platform_data *ion_parse_dt(struct platform_device *pdev,
+					struct ion_of_heap *compatible)

CHECK: Alignment should match open parenthesis
+	heaps = devm_kzalloc(&pdev->dev,
+				sizeof(struct ion_platform_heap)*num_heaps,

CHECK: Alignment should match open parenthesis
+	data = devm_kzalloc(&pdev->dev, sizeof(struct ion_platform_data),
+				GFP_KERNEL);

CHECK: Alignment should match open parenthesis
+		heap_pdev = of_platform_device_create(node, heaps[i].name,
+							&pdev->dev);

CHECK: Alignment should match open parenthesis
+	pr_debug("%s: heap %s base %pa size %pa dev %p\n", __func__,
+			heap->name, &rmem->base, &rmem->size, dev);

CHECK: Alignment should match open parenthesis
+static void rmem_ion_device_release(struct reserved_mem *rmem,
+					struct device *dev)
Signed-off-by: NYannis Damigos <giannis.damigos@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the following comparison with NULL issues:

CHECK: Comparison to NULL could be written "compatible[i].name"
+	for (i = 0; compatible[i].name != NULL; i++) {

CHECK: Comparison to NULL could be written "!compatible[i].name"
+	if (compatible[i].name == NULL)
Signed-off-by: NYannis Damigos <giannis.damigos@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

It was used to get a board structure with dgnc_BoardsByMajor array.
But this driver already has the array for managing initialized board
as dgap_board[]. It can be used for searching the board structure
by major number.
Signed-off-by: NDaeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The dgnc_major_serial_registered and dgnc_major_serial_registered
do not need to use to check whether the tty driver is registered or not.
These variables are used only in dgnc_cleanup_tty() function,
This function will be called normally with initialized board structure.
It means the dgnc_cleanup_tty() cannot be called with unregistered tty.
Signed-off-by: NDaeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The dgnc_tty_uninit() doesn't match with dgnc_tty_init() at all.
And also the dgnc_cleanup_tty() is only called for exiting the module.
Signed-off-by: NDaeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The dgnc_free_irq() will free the requested IRQ from
the dgnc_request_irq().
Signed-off-by: NDaeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The dgnc_finalize_board_init() function has only job for
requesting the IRQ. It should be renamed to dgnc_request_irq()
Signed-off-by: NDaeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The dgnc_tty_unregister() will be called when
the dgnc_tty_register() is failed.
Signed-off-by: NDaeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The functions related with tty device initialization are needed
to be moved from dgnc_found_board() to dgnc_init_one().
Signed-off-by: NDaeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The board structure should be freed when any function was failed
in dgnc_found_board(). And the board strucure will be stored
into dgnc_board array when the dgnc_found_board() function has no error.
Signed-off-by: NDaeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The ioremap() function can be failed, so it need to have error
handling in dgnc_do_remap(). And also the return type of
dgnc_do_remap() should be changed from "void" to "int"
Signed-off-by: NDaeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a temporary message buffer for the boot message
in dgnc_found_board() but the buffer was not used anywhere in
dgnc driver.
Signed-off-by: NDaeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The channel array in board_t was initialized in dgnc_found_board()
with NULL. But the channel is going to initialize in dgnc_tty_init().
So the channel array doesn't need to set NULL for initailization.
Signed-off-by: NDaeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unneccessary blank lines to resolve checkpatch issue.
Signed-off-by: NNamrata A Shettar <namrataashettar@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Mention data type along with the variable to resolve checkpatch issue.
Signed-off-by: NNamrata A Shettar <namrataashettar@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace data type with pointer of same type in sizeof() to resolve
checkpatch issue.
Signed-off-by: NNamrata A Shettar <namrataashettar@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add space around '*' to resolve checkpatch issue.
Signed-off-by: NNamrata A Shettar <namrataashettar@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove multiple blank lines to resolve checkpatch issue.
Signed-off-by: NNamrata A Shettar <namrataashettar@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename CamelCased function getChipType to sm750_get_chip_type
(prefex with sm750 in order to make the context of
the function clear).

This issue was found by checkpatch.pl
Signed-off-by: NMoshe Green <mgmoshes@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unnecessary 'else' after 'return' to resolve checkpatch issue.
Signed-off-by: NNamrata A Shettar <namrataashettar@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed a coding style issue. Changed symbolic permissions to octal.
Signed-off-by: NEric Salem <ericsalem@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This removes checkpatch.pl warnings:

WARNING: Block comments should align the * on each line
Signed-off-by: NGrygorii Maistrenko <grygoriimkd@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Check for v4l2_file_operations structures that are only stored in the
fops field of video_device structures. As this field is constant, so
v4l2_file_operations structures having this property can also be
declared constant.
Done using coccinelle:

@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct v4l2_file_operations i@p = {...};

@ok1@
identifier r1.i;
position p;
struct video_device x;
@@
x.fops=&i@p;

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
static
+const
struct v4l2_file_operations i={...};

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct v4l2_file_operations i;

File size before:
   text	   data	    bss	    dec	    hex	filename
   5608	    160	      4	   5772	   168c
drivers/staging/most/aim-v4l2/video.o

File size after:
   text	   data	    bss	    dec	    hex	filename
   5696	     96	      4	   5796	   16a4
drivers/staging/most/aim-v4l2/video.o
Signed-off-by: NBhumika Goyal <bhumirks@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Check for snd_pcm_ops structures that are only passed as the third
argument to the function snd_pcm_set_ops. As this argument is
constant, so snd_pcm_ops structures having this property can also be
made constant.
Done using coccinelle:

@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct snd_pcm_ops i@p = {...};

@ok1@
identifier r1.i;
position p;
expression e1,e2;
@@
snd_pcm_set_ops(e1,e2,&i@p)

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
static
+const
struct snd_pcm_ops i={...};

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct snd_pcm_ops i;

File size before:
   text	   data	    bss	    dec	    hex	filename
   4963	    192	     16	   5171	   1433
drivers/staging/most/aim-sound/sound.o

File size after:
   text	   data	    bss	    dec	    hex	filename
   5075	     64	     16	   5155	   1423
drivers/staging/most/aim-sound/sound.o
Signed-off-by: NBhumika Goyal <bhumirks@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix to return a negative error code from the audio_set_hw_params() error
handling case instead of 0, as done elsewhere in this function.
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NAndrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: NChristian Gromm <christian.gromm@microchip.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Per Documentation/CodingStyle, function names that convey an action or an
imperative command should return an integer. This commit converts the
visorbus API function, visorchannel_signalinsert(), to returning integer
values. All uses of this function are updated accordingly.
Signed-off-by: NDavid Binder <david.binder@unisys.com>
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Per Documentation/CodingStyle, function names that convey an action or an
imperative command should return an integer. This commit converts the
visorbus API function, visorchannel_signalremove(), to returning integer
values. All uses of this function are updated accordingly.
Signed-off-by: NDavid Binder <david.binder@unisys.com>
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Per Documentation/CodingStyle, function names that convey an action or an
imperative command should return an integer value. This commit changes
several functions and a macro, internal to visorchannel.c, to follow this
paradigm. These changes will be necessary later on to change other
functions in this file, which are part of the visorbus API, to return
integer values in lieu of a boolean.
Signed-off-by: NDavid Binder <david.binder@unisys.com>
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch ensures that consistent verbiage is used in the
MODULE_DESCRIPTION text (reported by 'modinfo') for all of
the Unisys s-Par drivers.
Signed-off-by: NJon Frisch <jon.frisch@unisys.com>
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes version.h and the last version.h
include in visorchannel.c.
Signed-off-by: NJon Frisch <jon.frisch@unisys.com>
Reported-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the driver version from visornic_main.c
Signed-off-by: NJon Frisch <jon.frisch@unisys.com>
Reported-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>