While drxj is already too big, moving the code there will
make easier to get rid of the drxj_ctrl function.

It will also help to detect and remove the unused functions,
helping to remove lots of dead code there.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Get rid of drx_open and drx_close, as those are just wrapper
functions to drxj_open/drxj_close.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This function is used only as an abstraction layer to call the
two firmware functions. Remove it.

As a bonus, the drx_ctrl_function is now unused and can be
removed.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Remove the duplicated firmware upload code that was commented
inside drxj.c.

This code is not used, and will not work anyway, as it doesn't
download the firmware from userspace.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The version is initialized with zero at drx_driver.c. Keep it,
in order to avoid the risk of causing any regression.

While here, remove the drx_driver.h from drxj, as this is not
required there.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This file contains just the firmware load code, that it is also
somewhat duplicated at drxj.c.

Move the code into there. Latter patches will remove the
duplicated code.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Without this fixup, the DRX-J will not be properly initialized,
loosing several PIDs.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Instead of hardcoding the firmware files together with the driver,
use request_firmware() way, loading it from userspace.

The firmware files are placed at:
	http://linuxtv.org/downloads/firmware/#8

And they'll be latter submitted to linux-firmware git tree.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This var is not used. Remove it from the code, as we'll now be
converting the driver to load the firmware from an external
file.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This file is empty (actually, all commented there). So, remove it.

We should latter remove those macros too, or convert them into
a struct to allow dynamically enable the options during device
probing time.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

There are several get/set macros that are bogus: they just
call another macro and do either:
	x = FOO(d)
or
	FOO(d) = x

As checkpatch complains about that, and replacing all of them
are as easy as running a small coccinelle script, get rid
of all of them.

Script used:

@@
expression d, x;
@@
-DRX_SET_MIRRORFREQSPECT(d, x);
+DRX_ATTR_MIRRORFREQSPECT(d) = x;

@@
expression d, x;
@@
-DRX_GET_MIRRORFREQSPECT(d, x);
+x = DRX_ATTR_MIRRORFREQSPECT(d);

@@
expression d, x;
@@
-DRX_SET_CURRENTPOWERMODE(d, x);
+DRX_ATTR_CURRENTPOWERMODE(d) = x;

@@
expression d, x;
@@
-DRX_GET_CURRENTPOWERMODE(d, x);
+x = DRX_ATTR_CURRENTPOWERMODE(d);

@@
expression d, x;
@@
-DRX_SET_MICROCODE(d, x);
+DRX_ATTR_MICROCODE(d) = x;

@@
expression d, x;
@@
-DRX_GET_MICROCODE(d, x);
+x = DRX_ATTR_MICROCODE(d);

@@
expression d, x;
@@
-DRX_SET_MICROCODESIZE(d, x);
+DRX_ATTR_MICROCODESIZE(d) = x;

@@
expression d, x;
@@
-DRX_GET_MICROCODESIZE(d, x);
+x = DRX_ATTR_MICROCODESIZE(d);

@@
expression d, x;
@@
-DRX_SET_VERIFYMICROCODE(d, x);
+DRX_ATTR_VERIFYMICROCODE(d) = x;

@@
expression d, x;
@@
-DRX_GET_VERIFYMICROCODE(d, x);
+x = DRX_ATTR_VERIFYMICROCODE(d);

@@
expression d, x;
@@
-DRX_SET_MCVERTYPE(d, x);
+DRX_ATTR_MCRECORD(d).aux_type = x;

@@
expression d, x;
@@
-DRX_GET_MCVERTYPE(d, x);
+x = DRX_ATTR_MCRECORD(d).aux_type;

@@
expression d, x;
@@
-DRX_SET_MCDEV(d, x);
+DRX_ATTR_MCRECORD(d).mc_dev_type = x;

@@
expression d, x;
@@
-DRX_GET_MCDEV(d, x);
+x = DRX_ATTR_MCRECORD(d).mc_dev_type;

@@
expression d, x;
@@
-DRX_SET_MCVERSION(d, x);
+DRX_ATTR_MCRECORD(d).mc_version = x;

@@
expression d, x;
@@
-DRX_GET_MCVERSION(d, x);
+x = DRX_ATTR_MCRECORD(d).mc_version;

@@
expression d, x;
@@
-DRX_SET_MCPATCH(d, x);
+DRX_ATTR_MCRECORD(d).mc_base_version = x;

@@
expression d, x;
@@
-DRX_GET_MCPATCH(d, x);
+x = DRX_ATTR_MCRECORD(d).mc_base_version;

@@
expression d, x;
@@
-DRX_SET_I2CADDR(d, x);
+DRX_ATTR_I2CADDR(d) = x;

@@
expression d, x;
@@
-DRX_GET_I2CADDR(d, x);
+x = DRX_ATTR_I2CADDR(d);

@@
expression d, x;
@@
-DRX_SET_I2CDEVID(d, x);
+DRX_ATTR_I2CDEVID(d) = x;

@@
expression d, x;
@@
-DRX_GET_I2CDEVID(d, x);
+x = DRX_ATTR_I2CDEVID(d);

@@
expression d, x;
@@
-DRX_SET_USEBOOTLOADER(d, x);
+DRX_ATTR_USEBOOTLOADER(d) = x;

@@
expression d, x;
@@
-DRX_GET_USEBOOTLOADER(d, x);
+x = DRX_ATTR_USEBOOTLOADER(d);

@@
expression d, x;
@@
-DRX_SET_CURRENTSTANDARD(d, x);
+DRX_ATTR_CURRENTSTANDARD(d) = x;

@@
expression d, x;
@@
-DRX_GET_CURRENTSTANDARD(d, x);
+x = DRX_ATTR_CURRENTSTANDARD(d);

@@
expression d, x;
@@
-DRX_SET_PREVSTANDARD(d, x);
+DRX_ATTR_PREVSTANDARD(d) = x;

@@
expression d, x;
@@
-DRX_GET_PREVSTANDARD(d, x);
+x = DRX_ATTR_PREVSTANDARD(d);

@@
expression d, x;
@@
-DRX_SET_CACHESTANDARD(d, x);
+DRX_ATTR_CACHESTANDARD(d) = x;

@@
expression d, x;
@@
-DRX_GET_CACHESTANDARD(d, x);
+x = DRX_ATTR_CACHESTANDARD(d);

@@
expression d, x;
@@
-DRX_SET_CURRENTCHANNEL(d, x);
+DRX_ATTR_CURRENTCHANNEL(d) = x;

@@
expression d, x;
@@
-DRX_GET_CURRENTCHANNEL(d, x);
+x = DRX_ATTR_CURRENTCHANNEL(d);

@@
expression d, x;
@@
-DRX_SET_ISOPENED(d, x);
+DRX_ATTR_ISOPENED(d) = x;

@@
expression d, x;
@@
-DRX_GET_ISOPENED(d, x);
+x = DRX_ATTR_ISOPENED(d);

@@
expression d, x;
@@
-DRX_SET_TUNER(d, x);
+DRX_ATTR_TUNER(d) = x;

@@
expression d, x;
@@
-DRX_GET_TUNER(d, x);
+x = DRX_ATTR_TUNER(d);

@@
expression d, x;
@@
-DRX_SET_CAPABILITIES(d, x);
+DRX_ATTR_CAPABILITIES(d) = x;

@@
expression d, x;
@@
-DRX_GET_CAPABILITIES(d, x);
+x = DRX_ATTR_CAPABILITIES(d);

@@
expression d, x;
@@
-DRX_SET_PRODUCTID(d, x);
+DRX_ATTR_PRODUCTID(d) = x;

@@
expression d, x;
@@
-DRX_GET_PRODUCTID(d, x);
+x = DRX_ATTR_PRODUCTID(d);

@@
expression d, x;
@@
-DRX_SET_MFX(d, x);
+DRX_ATTR_PRODUCTID(d) = x;

@@
expression d, x;
@@
-DRX_GET_MFX(d, x);
+x = DRX_ATTR_PRODUCTID(d);

@@
expression d, x;
@@
-DRX_SET_INTERMEDIATEFREQ(d, x);
+DRX_ATTR_INTERMEDIATEFREQ(d) = x;

@@
expression d, x;
@@
-DRX_GET_INTERMEDIATEFREQ(d, x);
+x = DRX_ATTR_INTERMEDIATEFREQ(d);

@@
expression d, x;
@@
-DRX_SET_SYSCLOCKFREQ(d, x);
+DRX_ATTR_SYSCLOCKFREQ(d) = x;

@@
expression d, x;
@@
-DRX_GET_SYSCLOCKFREQ(d, x);
+x = DRX_ATTR_SYSCLOCKFREQ(d);

@@
expression d, x;
@@
-DRX_SET_TUNERRFAGCPOL(d, x);
+DRX_ATTR_TUNERRFAGCPOL(d) = x;

@@
expression d, x;
@@
-DRX_GET_TUNERRFAGCPOL(d, x);
+x = DRX_ATTR_TUNERRFAGCPOL(d);

@@
expression d, x;
@@
-DRX_SET_TUNERIFAGCPOL(d, x);
+DRX_ATTR_TUNERIFAGCPOL(d) = x;

@@
expression d, x;
@@
-DRX_GET_TUNERIFAGCPOL(d, x);
+x = DRX_ATTR_TUNERIFAGCPOL(d);

@@
expression d, x;
@@
-DRX_SET_TUNERSLOWMODE(d, x);
+DRX_ATTR_TUNERSLOWMODE(d) = x;

@@
expression d, x;
@@
-DRX_GET_TUNERSLOWMODE(d, x);
+x = DRX_ATTR_TUNERSLOWMODE(d);

@@
expression d, x;
@@
-DRX_SET_TUNERPORTNR(d, x);
+DRX_ATTR_TUNERSPORTNR(d) = x;
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Instead of using printk's, use the pr_foo() macros.

That fixes some checkpatch warnings and provide a better error,
warning and debug support.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Instead of defining its own set of error codes, use the linux
native ones.

Please note that this patch made a "stupid" error code mapping, just
replacing the codes with the closest one. In special, -EIO is being
used on several places. I'm pretty sure this could be better assigned,
but a change like that would require lots o time and efforts, without
much benefit.

So lets do adjstments at the error codes latter, when we have more
time.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Fix almost all checkpatch.pl warnings/errors on drxj.c, except for:
- 80 cols whitespacing;
- too many leading tabs;
- a false positive at DRXJ_16TO8() macro.
- static char array declaration should probably be static const char
  as adding "const" would cause warnings.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Remove three typedefs from drxj.c, using the following script:

use File::Find;
use strict;

my $dir = shift or die "need a dir";
my $type = shift or die "need type";
my $var = shift or die "need var";

sub handle_file {
	my $file = shift;

	my $out;

	open IN, $file or die "can't open $file";
	$out .= $_ while (<IN>);
	close IN;

	$out =~ s/\btypedef\s+($type)\s+\{([\d\D]+?)\s*\}\s+\b($var)[^\;]+\;/$type $var \{\2\};/;

        # This replaces the typedef declaration for a simple struct declaration - style 1

        # This replaces the typedef declaration for a simple struct declaration - style 2

	# Replace struct occurrences

	$out =~ s,\b($var)_t\s+,$type \1 ,g;
	$out =~ s,\bp_*($var)_t\s+,$type \1 *,g;
	$out =~ s,\b($var)_t\b,$type \1,g;
	$out =~ s,\bp_*($var)_t\b,$type \1 *,g;

	open OUT, ">$file" or die "can't open $file";
	print OUT $out;
	close OUT;
}

sub parse_dir {
	my $file = $File::Find::name;

	return if (!($file =~ /.[ch]$/));

	handle_file $file;
}

find({wanted => \&parse_dir, no_chdir => 1}, $dir);
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Don't need to test boolean x == true or x == false.

That makes the code more compact.

patch generated with make coccicheck and manually reviewed.

While here, remove uneeded ';'.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

CodingStyle fix: don't use parenthesis on return, as it is not
a function.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Using return and goto inside macros is ugly and makes harder to
understand the code and the labels. Remove those macros, and add
a proper error debug message, when something bad happens.

This was generated using the following coccinelle script:

@@
@@
-DUMMY_READ();
+do {
+	u16 dummy;
+	RR16(demod->my_i2c_dev_addr, SCU_RAM_VERSION_HI__A, &dummy);
+} while (0);

@@
expression dev, addr, val;
@@
-WR16(dev, addr, val)
+CHK_ERROR(DRXJ_DAP.write_reg16func(dev, addr, val, 0))

@@
expression dev, addr, val;
@@
-RR16(dev, addr, val)
+CHK_ERROR(DRXJ_DAP.read_reg16func(dev, addr, val, 0))

@@
expression dev, addr, val;
@@
-WR32(dev, addr, val)
+CHK_ERROR(DRXJ_DAP.write_reg32func(dev, addr, val, 0))

@@
expression dev, addr, val;
@@
-RR32(dev, addr, val)
+CHK_ERROR(DRXJ_DAP.read_reg32func(dev, addr, val, 0))

@@
expression dev, addr, val, block;
@@
-WRB(dev, addr, val, block)
+CHK_ERROR(DRXJ_DAP.write_block_func(dev, addr, val, block, 0))

@@
expression dev, addr, val, block;
@@
-RRB(dev, addr, val, block)
+CHK_ERROR(DRXJ_DAP.read_block_func(dev, addr, val, block, 0))

@@
expression dev, addr, val;
@@
-BCWR16(dev, addr, val)
+CHK_ERROR(DRXJ_DAP.write_reg16func(dev, addr, val, DRXDAP_FASI_BROADCAST))

@@
expression dev, addr, val;
@@
-ARR32(dev, addr, val)
+CHK_ERROR(drxj_dap_atomic_read_reg32(dev, addr, val, 0))

@@
expression dev, addr, val;
@@
-SARR16(dev, addr, val)
+CHK_ERROR(drxj_dap_scu_atomic_read_reg16(dev, addr, val, 0))

@@
expression x;
@@
-CHK_ERROR(x);
+rc = x;
+if (rc != DRX_STS_OK) {
+	pr_err("error %d\n", rc);
+	goto rw_error;
+}
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/dvb-frontends/drx39xyj/drxj.c: In function ‘drxj_dap_scu_atomic_read_reg16’:
drivers/media/dvb-frontends/drx39xyj/drxj.c:4170:9: warning: ‘*((void *)&buf+1)’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  word = (u16) (buf[0] + (buf[1] << 8));
         ^
drivers/media/dvb-frontends/drx39xyj/drxj.c:4170:9: warning: ‘buf’ may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/media/dvb-frontends/drx39xyj/drxj.c: In function ‘drxj_dap_atomic_read_reg32.isra.59’:
drivers/media/dvb-frontends/drx39xyj/drxj.c:2186:7: warning: ‘*((void *)&buf+3)’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  word = (u32) buf[3];
       ^
drivers/media/dvb-frontends/drx39xyj/drxj.c:2188:10: warning: ‘*((void *)&buf+2)’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  word |= (u32) buf[2];
          ^
drivers/media/dvb-frontends/drx39xyj/drxj.c:2190:10: warning: ‘*((void *)&buf+1)’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  word |= (u32) buf[1];
          ^
drivers/media/dvb-frontends/drx39xyj/drxj.c:2192:10: warning: ‘buf’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  word |= (u32) buf[0];
          ^
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Some whitespace cleanups.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This were fixed with the help of this small perl script:

	#!/usr/bin/perl
	my $dir = shift or die "need a dir";
	my $type = shift or die "need type";
	my $var = shift or die "need var";
	sub handle_file {
		my $file = shift;
		my $out;
		open IN, $file or die "can't open $file";
		$out .= $_ while (<IN>);
		close IN;
		$out =~ s/\btypedef\s+($type)\s+\{([\d\D]+?)\s*\}\s+\b($var)[^\;]+\;/$type $var \{\2\};/;
		$out =~ s,\b($var)_t\s+,$type \1 ,g;
		$out =~ s,\bp_*($var)_t\s+,$type \1 *,g;
		$out =~ s,\b($var)_t\b,$type \1,g;
		$out =~ s,\bp_*($var)_t\b,$type \1 *,g;
		open OUT, ">$file" or die "can't open $file";
		print OUT $out;
		close OUT;
	}
	sub parse_dir {
		my $file = $File::Find::name;
		return if (!($file =~ /.[ch]$/));
		handle_file $file;
	}
	find({wanted => \&parse_dir, no_chdir => 1}, $dir);

Some manual work were needed.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Most of the changes were done with scripts like:
	for i in drivers/media/dvb-frontends/drx39xyj/*.[ch]; do perl -ne '$var = "drx_sig_quality"; s,\b($var)_t\s+,struct \1 ,g; s,\bp_*($var)_t\s+,struct \1 *,g; s,\b($var)_t\b,struct \1,g; s,\bp_*($var)_t\b,struct \1 *,g; print $_' <$i >a && mv a $i; done
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

None of those vars are used on those functions. Just remove them.

After this patch, there's just one of such warnings:

	drivers/media/dvb-frontends/drx39xyj/drxj.c: In function 'ctrl_get_qam_sig_quality':
	drivers/media/dvb-frontends/drx39xyj/drxj.c:7872:6: warning: variable 'ber_cnt' set but not used [-Wunused-but-set-variable]
	  u32 ber_cnt = 0; /* BER count */

We'll keep it, as BER count will be useful when converting the
frontend to report statistics via DVBv5 API
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This function is not static. Also, it is not used anywhere.
So, drop it.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This time, use checkpatch --strict --fix.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

There's no reason at all to use CamelCase here. Convert all of
them to normal case.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Instead of manually fixing the issues, use the --fix experimental
checkpatch. That solves a bunch of checkpatch issues.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Patch generated with this script:

for i in drivers/media/dvb-frontends/drx39xyj/*.[ch]; do perl -ne 's,(enum|struct|void|int|u32|u64|u16|u8|s8|s16|s32|s64)\s+(\S+)\s+\*[ ]+,\1 \2 *,g; print $_' <$i >a && mv a $i; done
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

There are lots of typedefs there. Let's get rid of them.

Most of the work here is due to this small script:

	if [ "$3" == "" ]; then
		echo "usage: $0 type DRXName drx_name"
	fi
	t=$1; f=$2; g=$3
	for i in *.[ch]; do
		sed s,"p${f}_t","$t $g *",g <$i >a && mv a $i && \
		sed s,"${f}_t","$t $g",g <$i >a && mv a $i
	done

Just kept there the function typedefs, as those are still useful.

Yet, all those tuner_ops can likely be just removed on a latter
cleanup patch.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Most of the work were done by those small scripts:

for i in *; do sed s,pDRXFrequency_t,"s32 *",g <$i >a && mv a $i; done
for i in *; do sed s,DRXFrequency_t,"s32",g <$i >a && mv a $i; done
for i in *; do sed s,pDRXSymbolrate_t,"u32 *",g <$i >a && mv a $i; done
for i in *; do sed s,DRXSymbolrate_t,"u32",g <$i >a && mv a $i; done
for i in *; do sed s,FALSE,false,g <$i >a && mv a $i; done
for i in *; do sed s,TRUE,true,g <$i >a && mv a $i; done
for i in *; do sed s,Bool_t,bool,g <$i >a && mv a $i; done
for i in *; do sed s,pbool,"bool *",g <$i >a && mv a $i; done

The only remaining things there are the return values.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Patch created using this small script:

for j in 8 16 32; do for i in *; do sed s,pu${j}_t,"u$j *",g <$i >a && mv a $i; done; done
for j in 8 16 32; do for i in *; do sed s,ps${j}_t,"s$j *",g <$i >a && mv a $i; done; done
for j in 8 16 32; do for i in *; do sed s,s${j}_t,"s$j",g <$i >a && mv a $i; done; done
for j in 8 16 32; do for i in *; do sed s,u${j}_t,"u$j",g <$i >a && mv a $i; done; done

and fixing the bsp_types.h header.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

After removing the typedef, it is now clear that HICommand() were
abusing of a var that was expecting to be constant:

drivers/media/dvb-frontends/drx39xyj/drxj.c: In function ‘HICommand’:
drivers/media/dvb-frontends/drx39xyj/drxj.c:2272:3: warning: passing argument 1 of ‘drxDapDRXJFunct_g.writeReg16Func’ discards ‘const’ qualifier from pointer target type [enabled by default]
drivers/media/dvb-frontends/drx39xyj/drxj.c:2272:3: note: expected ‘struct i2c_device_addr *’ but argument is of type ‘const struct i2c_device_addr *’
drivers/media/dvb-frontends/drx39xyj/drxj.c:2273:3: warning: passing argument 1 of ‘drxDapDRXJFunct_g.writeReg16Func’ discards ‘const’ qualifier from pointer target type [enabled by default]
drivers/media/dvb-frontends/drx39xyj/drxj.c:2273:3: note: expected ‘struct i2c_device_addr *’ but argument is of type ‘const struct i2c_device_addr *’
drivers/media/dvb-frontends/drx39xyj/drxj.c:2274:3: warning: passing argument 1 of ‘drxDapDRXJFunct_g.writeReg16Func’ discards ‘const’ qualifier from pointer target type [enabled by default]
drivers/media/dvb-frontends/drx39xyj/drxj.c:2274:3: note: expected ‘struct i2c_device_addr *’ but argument is of type ‘const struct i2c_device_addr *’
drivers/media/dvb-frontends/drx39xyj/drxj.c:2275:3: warning: passing argument 1 of ‘drxDapDRXJFunct_g.writeReg16Func’ discards ‘const’ qualifier from pointer target type [enabled by default]
drivers/media/dvb-frontends/drx39xyj/drxj.c:2275:3: note: expected ‘struct i2c_device_addr *’ but argument is of type ‘const struct i2c_device_addr *’
drivers/media/dvb-frontends/drx39xyj/drxj.c:2278:3: warning: passing argument 1 of ‘drxDapDRXJFunct_g.writeReg16Func’ discards ‘const’ qualifier from pointer target type [enabled by default]
drivers/media/dvb-frontends/drx39xyj/drxj.c:2278:3: note: expected ‘struct i2c_device_addr *’ but argument is of type ‘const struct i2c_device_addr *’
drivers/media/dvb-frontends/drx39xyj/drxj.c:2279:3: warning: passing argument 1 of ‘drxDapDRXJFunct_g.writeReg16Func’ discards ‘const’ qualifier from pointer target type [enabled by default]
drivers/media/dvb-frontends/drx39xyj/drxj.c:2279:3: note: expected ‘struct i2c_device_addr *’ but argument is of type ‘const struct i2c_device_addr *’
drivers/media/dvb-frontends/drx39xyj/drxj.c:2291:2: warning: passing argument 1 of ‘drxDapDRXJFunct_g.writeReg16Func’ discards ‘const’ qualifier from pointer target type [enabled by default]
drivers/media/dvb-frontends/drx39xyj/drxj.c:2291:2: note: expected ‘struct i2c_device_addr *’ but argument is of type ‘const struct i2c_device_addr *’
drivers/media/dvb-frontends/drx39xyj/drxj.c:2311:4: warning: passing argument 1 of ‘drxDapDRXJFunct_g.readReg16Func’ discards ‘const’ qualifier from pointer target type [enabled by default]
drivers/media/dvb-frontends/drx39xyj/drxj.c:2311:4: note: expected ‘struct i2c_device_addr *’ but argument is of type ‘const struct i2c_device_addr *’
drivers/media/dvb-frontends/drx39xyj/drxj.c:2315:3: warning: passing argument 1 of ‘drxDapDRXJFunct_g.readReg16Func’ discards ‘const’ qualifier from pointer target type [enabled by default]
drivers/media/dvb-frontends/drx39xyj/drxj.c:2315:3: note: expected ‘struct i2c_device_addr *’ but argument is of type ‘const struct i2c_device_addr *’
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Most of the hard work here were done by this small script:

for i in *; do sed s,pI2CDeviceAddr_t,"struct i2c_device_addr *",g <$i >a && mv a $i; done
for i in *; do sed s,I2CDeviceAddr_t,"struct i2c_device_addr",g <$i >a && mv a $i; done

Only bsp_i2c.h were added by hand.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Do the automatic CodingStyle fixes found at Lindent.

No functional changes.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Relicense the drx-j driver under a standard 3-clause BSD license, which makes
it GPL compatible.

This was done explicitly with permission from Trident Microsystems.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add support for the Trident DRX-J driver, including a card profile for the
PCTV 80e which uses the chip.

Thanks to Trident for allowing the release of this code under a BSD license,
and of course Hauppauge/PCTV for pushing for its release to the community.

[pdickeybeta@gmail.com: modified to fix compilation errors and also to move
 the driver files from the drx39xy subdirectory to the frontends directory]

[m.chehab@samsung.com: fix merge conflicts, commented drx-j compilation and
 added EM28XX_R06_I2C_CLK setup also to the board setup]
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>