During S3 or S4 resume or PCI reset, ATS regs aren't restored correctly.
This patch enables ATS at the device state restore if PCI device has ATS
capability.
Signed-off-by: NXudong Hao <xudong.hao@intel.com>
Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This warning was recently reported to me:

------------[ cut here ]------------
WARNING: at lib/kobject.c:595 kobject_put+0x50/0x60()
Hardware name: VMware Virtual Platform
kobject: '(null)' (ffff880027b0df40): is not initialized, yet kobject_put() is
being called.
Modules linked in: vmxnet3(+) vmw_balloon i2c_piix4 i2c_core shpchp raid10
vmw_pvscsi
Pid: 630, comm: modprobe Tainted: G        W   3.1.6-1.fc16.x86_64 #1
Call Trace:
 [<ffffffff8106b73f>] warn_slowpath_common+0x7f/0xc0
 [<ffffffff8106b836>] warn_slowpath_fmt+0x46/0x50
 [<ffffffff810da293>] ? free_desc+0x63/0x70
 [<ffffffff812a9aa0>] kobject_put+0x50/0x60
 [<ffffffff812e4c25>] free_msi_irqs+0xd5/0x120
 [<ffffffff812e524c>] pci_enable_msi_block+0x24c/0x2c0
 [<ffffffffa017c273>] vmxnet3_alloc_intr_resources+0x173/0x240 [vmxnet3]
 [<ffffffffa0182e94>] vmxnet3_probe_device+0x615/0x834 [vmxnet3]
 [<ffffffff812d141c>] local_pci_probe+0x5c/0xd0
 [<ffffffff812d2cb9>] pci_device_probe+0x109/0x130
 [<ffffffff8138ba2c>] driver_probe_device+0x9c/0x2b0
 [<ffffffff8138bceb>] __driver_attach+0xab/0xb0
 [<ffffffff8138bc40>] ? driver_probe_device+0x2b0/0x2b0
 [<ffffffff8138bc40>] ? driver_probe_device+0x2b0/0x2b0
 [<ffffffff8138a8ac>] bus_for_each_dev+0x5c/0x90
 [<ffffffff8138b63e>] driver_attach+0x1e/0x20
 [<ffffffff8138b240>] bus_add_driver+0x1b0/0x2a0
 [<ffffffffa0188000>] ? 0xffffffffa0187fff
 [<ffffffff8138c246>] driver_register+0x76/0x140
 [<ffffffff815ca414>] ? printk+0x51/0x53
 [<ffffffffa0188000>] ? 0xffffffffa0187fff
 [<ffffffff812d2996>] __pci_register_driver+0x56/0xd0
 [<ffffffffa018803a>] vmxnet3_init_module+0x3a/0x3c [vmxnet3]
 [<ffffffff81002042>] do_one_initcall+0x42/0x180
 [<ffffffff810aad71>] sys_init_module+0x91/0x200
 [<ffffffff815dccc2>] system_call_fastpath+0x16/0x1b
---[ end trace 44593438a59a9558 ]---
Using INTx interrupt, #Rx queues: 1.

It occurs when populate_msi_sysfs fails, which in turn causes free_msi_irqs to
be called.  Because populate_msi_sysfs fails, we never registered any of the
msi irq sysfs objects, but free_msi_irqs still calls kobject_del and kobject_put
on each of them, which gets flagged in the above stack trace.

The fix is pretty straightforward.  We can key of the parent pointer in the
kobject.  It is only set if the kobject_init_and_add succededs in
populate_msi_sysfs.  If anything fails there, each kobject has its parent reset
to NULL
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
CC: Bjorn Helgaas <bhelgaas@google.com>
CC: Greg Kroah-Hartman <gregkh@suse.de>
CC: linux-pci@vger.kernel.org
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Just fix this help text.
Signed-off-by: NP. Christeas <xrg@linux.gr>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

When the runtime PM is activated on PCI, if a device switches state
frequently (e.g. an EHCI controller with autosuspending USB devices
connected) the PCI configuration traces might be very verbose in the
kernel log.  Let's guard those traces with DEBUG condition.
Acked-by: N"Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NVincent Palatin <vpalatin@chromium.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

All users of pci_create_bus() have been converted to pci_create_root_bus(),
so remove it.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Convert from pci_scan_bus() to pci_scan_root_bus() and remove root bus
fixups.  This fixes the problem of "early" and "header" quirks
seeing incorrect root bus resources.

This arch was unusual because it filled in bus->resource[0..3] in
pcibios_init(), then overwrote them, applied io_space.offset and
checked for unset resources in pcibios_fixup_bus().  I moved all of
that to a new pci_controller_apertures() that we can use before
scanning the root bus.

CC: Chris Zankel <chris@zankel.net>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

x86 has two kinds of PCI root bus scanning:

(1) ACPI-based, using _CRS resources.  This used pci_create_bus(), not
    pci_scan_bus(), because ACPI hotplug needed to split the
    pci_bus_add_devices() into a separate host bridge .start() method.

    This patch parses the _CRS resources earlier, so we can build a list of
    resources and pass it to pci_create_root_bus().

    Note that as before, we parse the _CRS even if we aren't going to use
    it so we can print it for debugging purposes.

(2) All other, which used either default resources (ioport_resource and
    iomem_resource) or information read from the hardware via amd_bus.c or
    similar.  This used pci_scan_bus().

    This patch converts x86_pci_root_bus_res_quirks() (previously called
    from pcibios_fixup_bus()) to x86_pci_root_bus_resources(), which builds
    a list of resources before we call pci_scan_root_bus().

    We also use x86_pci_root_bus_resources() if we have ACPI but are
    ignoring _CRS.

CC: Yinghai Lu <yinghai.lu@oracle.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This doesn't change any functionality, but it makes a subsequent patch
slightly simpler.

pci_scan_bus(NULL, ...) and pci_scan_bus_parented() are identical except
that pci_scan_bus() also calls pci_bus_add_devices():

  pci_scan_bus_parented
    pci_create_bus
    pci_scan_child_bus

  pci_scan_bus
    pci_create_bus
    pci_scan_child_bus
    pci_bus_add_devices

All callers of pcibios_scan_root() call pci_bus_add_devices() explicitly,
and we don't pass a parent device, so we might as well use pci_scan_bus().
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

We currently read the CNB20LE aperture information in a PCI quirk,
which happens after we've already created the root bus.  This patch
changes it to read the apertures earlier so we can create the root
bus with the correct resources.

I believe the CNB20LE lives at "pci 0000:00:00" based on
https://lkml.org/lkml/2010/8/13/220

CC: Ira W. Snyder <iws@ovro.caltech.edu>
CC: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Convert from pci_scan_bus_parented() to pci_scan_root_bus() and remove root
bus resource fixups.  This fixes the problem of "early" and "header" quirks
seeing incorrect root bus resources.

pci_scan_root_bus() also includes the pci_bus_add_devices() so we don't
need to do that separately.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Convert from pci_create_bus() to pci_create_root_bus().  This way the root
bus resources are correct immediately.  This patch doesn't fix a problem
because sparc fixed the resources before scanning the bus, but it makes
sparc more consistent with other architectures.

v2: fix build error (from sfr)
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Convert from pci_scan_bus() to pci_scan_root_bus() and remove root bus
resource fixups.  This fixes the problem of "early" and "header" quirks
seeing incorrect root bus resources.

CC: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Convert from pci_create_bus() to pci_create_root_bus().  This way the root
bus resources are correct immediately.  This patch doesn't fix a problem
because powerpc fixed the resources before scanning the bus, but it makes
powerpc more consistent with other architectures.

v2: fix build error with resource pointer passing

CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

No functional change.  This is so we can use pcibios_phb_map_io_space()
before we have a struct pci_bus.

v2: fix map io phb typo

CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Supply root bus resources to pci_create_root_bus() so they're correct
immediately.  This fixes the problem of "early" and "header" quirks seeing
incorrect root bus resources.

CC: linux-parisc@vger.kernel.org
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

No functional change here; just converting from pci_scan_bus_parented()
to pci_create_bus() to make a future patch simpler.

CC: linux-parisc@vger.kernel.org
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This moves the truncate_pat_collision() call out of the pcibios_fixup_bus()
path so that when a future patch builds a list of root bus resources for
pci_create_bus(), it can use the truncated LMMIO range.

truncate_pat_collision() used to be called in this path:

    pci_scan_bus_parented
      pci_create_bus
      pci_scan_child_bus
        pcibios_fixup_bus
	  lba_fixup_bus
	    truncate_pat_collision

All of the PAT and lba_dev resource setup must be done before we call
pci_scan_bus_parented(), so it should be safe to move the
truncate_pat_collision() to just before pci_scan_bus_parented().

CC: linux-parisc@vger.kernel.org
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Supply root bus resources to pci_create_root_bus() so they're correct
immediately.  This fixes the problem of "early" and "header" quirks seeing
incorrect root bus resources.

CC: linux-parisc@vger.kernel.org
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

No functional change here; just converting from pci_scan_bus_parented()
to pci_create_bus() to make a future patch simpler.

CC: linux-parisc@vger.kernel.org
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Convert from pci_scan_bus() to pci_scan_root_bus() and remove root bus
resource fixups.  This fixes the problem of "early" and "header" quirks
seeing incorrect root bus resources.

CC: David Howells <dhowells@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Convert from pci_scan_bus() to pci_scan_root_bus() and remove root bus
resource fixups.  This fixes the problem of "early" and "header" quirks
seeing incorrect root bus resources.

Based on original patch by Deng-Cheng Zhu.

Reference: https://lkml.org/lkml/2011/8/26/89
CC: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NDeng-Cheng Zhu <dczhu@mips.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Microblaze doesn't need to replace pci_scan_child_bus() or do anything
special before pci_bus_add_devices(), so we can use the more generic PCI
path in pci_scan_root_bus().

CC: Michal Simek <monstr@monstr.eu>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Convert from pci_create_bus() to pci_create_root_bus().  This way the root
bus resources are correct immediately.  This patch doesn't fix a problem
because microblaze fixed the resources before scanning the bus, but it makes
microblaze more consistent with other architectures.  It also allows us to
use the pci_scan_root_bus() path safely.

CC: Michal Simek <monstr@monstr.eu>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

CC: Michal Simek <monstr@monstr.eu>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

The pci_bus_for_each_resource() iterator sets "res" itself, so there's
no need to look it up in the bus->resource[] table.

Logically part of 89a74ecc and 8a66da71.

CC: Michal Simek <monstr@monstr.eu>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Convert from pci_create_bus() to pci_create_root_bus().  This way the root
bus resources are correct immediately.  This fixes the problem of "early"
and "header" quirks seeing incorrect root bus resources.

We can't use pci_scan_root_bus() because, like x86, ACPI hotplug currently
requires pci_bus_add_devices() in a separate host bridge .start() method.

v2: fix compile error by using window resource pointer instead

CC: Tony Luck <tony.luck@intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This doesn't change any functionality, but it makes a subsequent patch
slightly simpler.

CC: Tony Luck <tony.luck@intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Convert from pci_scan_bus() to pci_scan_root_bus() and remove root bus
resource fixups.  This fixes the problem of "early" and "header" quirks
seeing incorrect root bus resources.

Note that peer root buses are scanned with pci_scan_bus() (which is now
deprecated), so they have the default ioport_resource and iomem_resource
resources.  This is unchanged from before, but these resources are
incorrect, and I don't know how to discover the correct ones.

CC: David Howells <dhowells@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Convert from pci_scan_bus() to pci_scan_root_bus() and remove root bus
resource fixups.  This fixes the problem of "early" and "header" quirks
seeing incorrect root bus resources.

CC: Russell King <linux@arm.linux.org.uk>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Convert from pci_scan_bus() to pci_scan_root_bus() and remove root bus
resource fixups.  This fixes the problem of "early" and "header" quirks
seeing incorrect root bus resources.

v2: fix up conversion

CC: linux-alpha@vger.kernel.org
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Users of pci_scan_bus_parented() should be converted to use either
    pci_scan_root_bus() (preferred, but also calls pci_bus_add_devices)
or
    pci_create_root_bus()
    pci_scan_child_bus()

Since pci_scan_bus_parented(), I'm marking it deprecated now and will
actually remove it later.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This converts pci_scan_bus_parented() to use pci_create_root_bus()
instead of pci_create_bus().  The new bus still has the default (incorrect)
resources, so this patch doesn't help fix that problem, but it does remove
one more use of pci_create_bus().
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

I plan to deprecate pci_scan_bus_parented(), so use pci_create_root_bus()
directly instead.  pci_scan_bus() itself will be removed as soon as all
callers are gone, so this is just an interim step.

v2: export pci_scan_bus
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

"Early" and "header" quirks often use incorrect bus resources because they
see the default resources assigned by pci_create_bus(), before the
architecture fixes them up (typically in pcibios_fixup_bus()).  Regions
reserved by these quirks end up with the wrong parents.

Here's the standard path for scanning a PCI root bus:

  pci_scan_bus or pci_scan_bus_parented
    pci_create_bus                     <-- A create with default resources
    pci_scan_child_bus
      pci_scan_slot
        pci_scan_single_device
          pci_scan_device
            pci_setup_device
              pci_fixup_device(early)  <-- B
          pci_device_add
            pci_fixup_device(header)   <-- C
      pcibios_fixup_bus                <-- D fill in correct resources

Early and header quirks at B and C use the default (incorrect) root bus
resources rather than those filled in at D.

This patch adds a new pci_scan_root_bus() function that sets the bus
resources correctly from a supplied list of resources.

I intend to remove pci_scan_bus() and pci_scan_bus_parented() after
fixing all callers.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

pci_create_bus() assigns ioport_resource and iomem_resource as the default
bus resources, i.e., the entire address space.  Architectures fix these
later, typically in pcibios_fixup_bus() or after pci_scan_bus_parented()
returns, but code that runs in the interim sees incorrect resource
information.

This patch adds a new pci_create_root_bus() that sets the bus resources
correctly from a supplied list of resources.

I intend to remove pci_create_bus() after changing all callers.

Based on original patch by Deng-Cheng Zhu.

Reference: http://www.spinics.net/lists/mips/msg41654.html
Reference: https://lkml.org/lkml/2011/8/26/88Signed-off-by: NDeng-Cheng Zhu <dczhu@mips.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Show the bus number and resources for every root bus we create.  This
will become more interesting when we supply the correct resources
instead of using the defaults (ioport_resource and iomem_resource).
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

We'd like to supply a list of resources when we create a new PCI bus,
e.g., the root bus under a PCI host bridge.  These are helpers for
constructing that list.

These are exported because the plan is to replace this exported interface:
    pci_scan_bus_parented()
with this one:
    pci_add_resource(resources, ...)
    pci_scan_root_bus(..., resources)
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

The SRIOV capability, namely page size and total_vfs of a device are
configured during enumeration phase of the device.  This can potentially
interfere with the PCI operations of the platform, if the IOV capability
of the device is not enabled.

The following patch postpones the configuration of the IOV capability of
the device to a later point, when the IOV capability is explicitly
enabled by the device driver.

The patch is tested on x86 and power platform.
Tested-by: NDonald Dutile <ddutile@redhat.com>
Signed-off-by: NRam Pai <linuxram@us.ibm.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

During debugging pcie hotplug with SRIOV with pcie switch, I found
pci_stop_bus_device() is called several times for some child devices.

So change original pci_remove_bus_device() to __pci_remove_bus_device(),
and make it only do remove work, and add a new pci_remove_bus_device
that calls pci_stop_bus_device() one time, and then call
__pci_remove_bus_device().
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>