Impact: cleanup

all for_each_irq_desc() usage point have !desc check.
then its check can move into for_each_irq_desc() macro.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: reduce kconfig variable scope and clean up

Bartlomiej pointed out that the config dependencies and comments are not right.

update it depend to NUMA, and fix some comments
Reported-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: improve NUMA handling by migrating irq_desc on smp_affinity changes

if CONFIG_NUMA_MIGRATE_IRQ_DESC is set:

-  make irq_desc to go with affinity aka irq_desc moving etc
-  call move_irq_desc in irq_complete_move()
-  legacy irq_desc is not moved, because they are allocated via static array

for logical apic mode, need to add move_desc_in_progress_in_same_domain,
otherwise it will not be moved ==> also could need two phases to get
irq_desc moved.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: simplify code

Pass irq_desc and cfg around, instead of raw IRQ numbers - this way
we dont have to look it up again and again.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: sanitize MSI irq number ordering from top-down to bottom-up

Increase new MSI IRQs starting from nr_irqs_gsi (which is somewhere below
256), instead of decreasing from NR_IRQS. (The latter method can result
in confusingly high IRQ numbers - if NR_CPUS is set to a high value and
NR_IRQS scales up to a high value.)
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Introduce NR_IRQS_LEGACY instead of hard coded number.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: new feature

Problem on distro kernels: irq_desc[NR_IRQS] takes megabytes of RAM with
NR_CPUS set to large values. The goal is to be able to scale up to much
larger NR_IRQS value without impacting the (important) common case.

To solve this, we generalize irq_desc[NR_IRQS] to an (optional) array of
irq_desc pointers.

When CONFIG_SPARSE_IRQ=y is used, we use kzalloc_node to get irq_desc,
this also makes the IRQ descriptors NUMA-local (to the site that calls
request_irq()).

This gets rid of the irq_cfg[] static array on x86 as well: irq_cfg now
uses desc->chip_data for x86 to store irq_cfg.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix MSIx not enough irq numbers available regression

The manual revert of the sparse_irq patches missed to bring the number
of possible irqs back to the .27 status. This resulted in a regression
when two multichannel network cards were placed in a system with only
one IO_APIC - causing the networking driver to not have the right
IRQ and the device not coming up.

Remove the dynamic allocation logic leftovers and simply return
NR_IRQS in probe_nr_irqs() for now.

   Fixes: http://lkml.org/lkml/2008/11/19/354Reported-by: NJesper Dangaard Brouer <hawk@diku.dk>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NJesper Dangaard Brouer <hawk@diku.dk>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When we migrate an interrupt from one CPU to another, we set the
move_in_progress flag and clean up the vectors later once they're not
being used.  If you're unlucky and call destroy_irq() before the vectors
become un-used, the move_in_progress flag is never cleared, which causes
the interrupt to become unusable.

This was discovered by Jesse Brandeburg for whom it manifested as an
MSI-X device refusing to use MSI-X mode when the driver was unloaded
and reloaded repeatedly.
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

setup_ioapic_dest() is called after the non boot cpus have been
brought up. It sets the irq affinity of all already configured
interrupts to all cpus and ignores affinity settings which were
done by the early bootup code.

If the IRQ_NO_BALANCING or IRQ_AFFINITY_SET flags are set then use the
affinity mask from the irq descriptor and not TARGET_CPUS.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix boot hang on 32-bit systems with more than 224 IO-APIC pins

On some 32-bit systems with a lot of IO-APICs probe_nr_irqs() can
return a value larger than NR_IRQS. This will lead to probe_irq_on()
overrunning the irq_desc array.

I hit this when running net-next-2.6 (close to 2.6.28-rc3) on a
Supermicro dual Xeon system.  NR_IRQS is 224 but probe_nr_irqs() detects
5 IOAPICs and returns 240.  Here are the log messages:

Tue Nov  4 16:53:47 2008 ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Tue Nov  4 16:53:47 2008 IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Tue Nov  4 16:53:47 2008 ACPI: IOAPIC (id[0x02] address[0xfec81000] gsi_base[24])
Tue Nov  4 16:53:47 2008 IOAPIC[1]: apic_id 2, version 32, address 0xfec81000, GSI 24-47
Tue Nov  4 16:53:47 2008 ACPI: IOAPIC (id[0x03] address[0xfec81400] gsi_base[48])
Tue Nov  4 16:53:47 2008 IOAPIC[2]: apic_id 3, version 32, address 0xfec81400, GSI 48-71
Tue Nov  4 16:53:47 2008 ACPI: IOAPIC (id[0x04] address[0xfec82000] gsi_base[72])
Tue Nov  4 16:53:47 2008 IOAPIC[3]: apic_id 4, version 32, address 0xfec82000, GSI 72-95
Tue Nov  4 16:53:47 2008 ACPI: IOAPIC (id[0x05] address[0xfec82400] gsi_base[96])
Tue Nov  4 16:53:47 2008 IOAPIC[4]: apic_id 5, version 32, address 0xfec82400, GSI 96-119
Tue Nov  4 16:53:47 2008 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Tue Nov  4 16:53:47 2008 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Tue Nov  4 16:53:47 2008 Enabling APIC mode:  Flat.  Using 5 I/O APICs
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Acked-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NIngo Molnar <mingo@elte.hu>

Revert the dynarray changes. They need more thought and polishing.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Remove the leftover of sparseirqs.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This code is not ready, but we need to rip it out instead of rebasing
as we would lose the APIC/IO_APIC unification otherwise.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Provide a means for UV interrupt MMRs to be setup with the message to be sent
when an MSI is raised.
Signed-off-by: NDean Nelson <dcn@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

v2: fix hpet compiling error
v3: Bjorn want to use dev_printk instead
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Clean up obscure for() cycle with straight while() form
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Interrupt remapping could lead to NULL dereference in case of
kzalloc failed and memory leak in other way. So fix the
both cases.
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Yinghai Lu reported:

| >  0 add_pin_to_irq: irq 15 --> apic 0 pin 15
| > IOAPIC[0]: Set routing entry (8-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
| >  8-16 8-17 8-18 8-19 8-20 8-21 8-22 8-23 (apicid-pin) not connected
| >  9-0 9-1 9-2 9-3 9-4 9-5 9-6 9-7 9-8 9-9 9-10 9-11 9-12 9-13 9-14 9-15
| > 9-16 9-17 9-18 9-19 9-20 9-21 9-22 9-23 (apicid-pin) not connected
| >
|
| only first one not connected at first, and ...

here is a quick fix for this.
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Replace __DO_ACTION macro with io_apic_modify_irq function.
This allow us to 'grep' definitions being hided by
__DO_ACTION macro:

	__unmask_IO_APIC_irq
	__mask_IO_APIC_irq
	__mask_and_edge_IO_APIC_irq
	__unmask_and_level_IO_APIC_irq
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Acked-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Do not use KERN_DEBUG several times on the same line being printed.
Introduced by mine previous patch, sorry.
Reported-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

By changing printout form we are able to shrink (and clean up) code a bit.

Former printout example:

	init IO_APIC IRQs
	 IO-APIC (apicid-pin) 1-1, 1-2, 1-3 not connected.
	 IO-APIC (apicid-pin) 2-1, 2-2, 2-3 not connected.

New printout example:

	init IO_APIC IRQs
	 1-1 1-2 1-3 (apicid-pin) not connected
	 2-1 2-2 2-3 (apicid-pin) not connected
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Basic HPET MSI setup code. Routines to perform basic MSI read write
in HPET memory map and setting up irq_chip for HPET MSI.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We use irq_cfg_lock lock in SPARSE_IRQ only context so
move it under #ifdef and compiler will be happy.
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Make the code width a bit shorter with ARRAY_SIZE macro.
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

APIC_ARBPRI is a reserved register for XAPIC and beyond.
APIC_RRR is a reserved register except for 82489DX, APIC for Pentium processors.
APIC_EOI is a write only register.
APIC_DFR is reserved in x2apic mode.

Access to these registers in x2apic will result in #GP fault. Fix these
apic register accesses.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

otherwise Xen is _completely_ unusable with 5 or more VCPUs.
(when !CONFIG_HAVE_SPARSE_IRQ).

based on Alex Nixon's patch.

also add +1 offset after redir_entries
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Acked-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: NAlex Nixon <alex.nixon@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Missed two lines when copying.

Fix panic on one of Ingo's machines that need to adjust ioapic id when
acpi off/ 32bit.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Suresh Siddha noticed that we should have a spinlock around it.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

fix warning:

  arch/x86/kernel/io_apic.c: In function ‘print_local_APIC’:
  arch/x86/kernel/io_apic.c:1786: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘u64’
  arch/x86/kernel/io_apic.c:1787: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘u64’

By creating uniform behavior on 32-bit and 64-bit and printing out the ICR
value in two 32-bit words.

Code has changed:

   text	   data	    bss	    dec	    hex	filename
  22901	  19650	  17040	  59591	   e8c7	io_apic.o.before
  22899	  19650	  17040	  59589	   e8c5	io_apic.o.after

Due to the 32-bit cast narrowing the printed out value on 64-bit.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

for !CONFIG_HAVE_SPARSE_IRQ

fix:

 In file included from arch/x86/kernel/early-quirks.c:18:
 include/asm/io_apic.h: In function 'probe_nr_irqs':
 include/asm/io_apic.h:209: error: 'NR_IRQS' undeclared (first use in this function)
 include/asm/io_apic.h:209: error: (Each undeclared identifier is reported only once
 include/asm/io_apic.h:209: error: for each function it appears in.)

v2: fix by Ingo
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Ingo said sparse_irq is some intrusive. need to make it selectable

to make it simple, remove irq_desc as parameter in some functions.
(ack, eoi, set_affinity).
may need to make member if irq_chip to take irq_desc, or struct irq later.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

instead of print that of all APs at the time
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

no user now
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

use code in 64 to replace
	move_native_irq(irq, desc);
in 32 bit
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

use MACRO for 32 bit too
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>