- 18 5月, 2013 6 次提交
-
-
由 Sachin Kamat 提交于
version.h header inclusion is not necessary as detected by checkversion.pl. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
The commit 823aa873 Author: stephen hemminger <stephen@networkplumber.org> Date: Sat Apr 27 11:31:57 2013 +0000 vxlan: allow choosing destination port per vxlan introduced per-vxlan UDP port configuration but only did half of the necessary work. It added per vxlan destination for sending, but overlooked the handling of multiple ports for incoming traffic. This patch changes the listening port management to handle multiple incoming UDP ports. The earlier per-namespace structure is now a hash list per namespace. It is also now possible to define the same virtual network id but with different UDP port values which can be useful for migration. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Emilio López 提交于
Clean up the code a bit to initialize the variables directly when defining them. Signed-off-by: NEmilio López <emilio@elopez.com.ar> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Emilio López 提交于
Clean up the code a bit to initialize the variables directly when defining them. Signed-off-by: NEmilio López <emilio@elopez.com.ar> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Emilio López 提交于
Clean up the code a bit to initialize the variables directly when defining them. Signed-off-by: NEmilio López <emilio@elopez.com.ar> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Emilio López 提交于
Clean up the code a bit to initialize the variables directly when defining them. Signed-off-by: NEmilio López <emilio@elopez.com.ar> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 5月, 2013 4 次提交
-
-
git://gitorious.org/linux-can/linux-can-next由 David S. Miller 提交于
Marc Kleine-Budde says: ==================== this is a pull-request for net-next/master. It consists of 4 patches by Jingoo Han, which remove the unnecessary platform_set_drvdata() and a patch by Laurent Navet converting the grcan driver to use devm_ioremap_resource(). ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 govindarajulu.v 提交于
This patch removes unnecessary #if 0 code from 3c509.c Signed-off-by: Ngovindarajulu.v <govindarajulu90@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wolfram Sang 提交于
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: NWolfram Sang <wsa@the-dreams.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
tcp_fixup_rcvbuf() contains a loop to estimate initial socket rcv space needed for a given mss. With large MTU (like 64K on lo), we can loop ~500 times and consume a lot of cpu cycles. perf top of 200 concurrent netperf -t TCP_CRR 5.62% netperf [kernel.kallsyms] [k] tcp_init_buffer_space 1.71% netperf [kernel.kallsyms] [k] _raw_spin_lock 1.55% netperf [kernel.kallsyms] [k] kmem_cache_free 1.51% netperf [kernel.kallsyms] [k] tcp_transmit_skb 1.50% netperf [kernel.kallsyms] [k] tcp_ack Lets use a 100% factor, and remove the loop. 100% is needed anyway for tcp_adv_win_scale=1 default value, and is also the maximum factor. Refs: commit b49960a0 ("tcp: change tcp_adv_win_scale and tcp_rmem[2]") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 5月, 2013 5 次提交
-
-
由 Jingoo Han 提交于
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Jingoo Han 提交于
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Jingoo Han 提交于
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Jingoo Han 提交于
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Laurent Navet 提交于
Replace a call to deprecated devm_request_and_ioremap by devm_ioremap_resource. dev_err() message is no more needed since it's already displayed in devm_ioremap_resource(). Signed-off-by: NLaurent Navet <laurent.navet@gmail.com> Acked-by: NAndreas Larsson <andreas@gaisler.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
- 14 5月, 2013 3 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "Several small bug fixes all over: 1) be2net driver uses wrong payload length when submitting MAC list get requests to the chip. From Sathya Perla. 2) Fix mwifiex memory leak on driver unload, from Amitkumar Karwar. 3) Prevent random memory access in batman-adv, from Marek Lindner. 4) batman-adv doesn't check for pskb_trim_rcsum() errors, also from Marek Lindner. 5) Fix fec crashes on rapid link up/down, from Frank Li. 6) Fix inner protocol grovelling in GSO, from Pravin B Shelar. 7) Link event validation fix in qlcnic from Rajesh Borundia. 8) Not all FEC chips can support checksum offload, fix from Shawn Guo. 9) EXPORT_SYMBOL + inline doesn't make any sense, from Denis Efremov. 10) Fix race in passthru mode during device removal in macvlan, from Jiri Pirko. 11) Fix RCU hash table lookup socket state race in ipv6, leading to NULL pointer derefs, from Eric Dumazet. 12) Add several missing HAS_DMA kconfig dependencies, from Geert Uyttterhoeven. 13) Fix bogus PCI resource management in 3c59x driver, from Sergei Shtylyov. 14) Fix info leak in ipv6 GRE tunnel driver, from Amerigo Wang. 15) Fix device leak in ipv6 IPSEC policy layer, from Cong Wang. 16) DMA mapping leak fix in qlge from Thadeu Lima de Souza Cascardo. 17) Missing iounmap on probe failure in bna driver, from Wei Yongjun." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits) bna: add missing iounmap() on error in bnad_init() qlge: fix dma map leak when the last chunk is not allocated xfrm6: release dev before returning error ipv6,gre: do not leak info to user-space virtio_net: use default napi weight by default emac: Fix EMAC soft reset on 460EX/GT 3c59x: fix PCI resource management caif: CAIF_VIRTIO should depend on HAS_DMA net/ethernet: MACB should depend on HAS_DMA net/ethernet: ARM_AT91_ETHER should depend on HAS_DMA net/wireless: ATH9K should depend on HAS_DMA net/ethernet: STMMAC_ETH should depend on HAS_DMA net/ethernet: NET_CALXEDA_XGMAC should depend on HAS_DMA ipv6: do not clear pinet6 field macvlan: fix passthru mode race between dev removal and rx path ipv4: ip_output: remove inline marking of EXPORT_SYMBOL functions net/mlx4: Strengthen VLAN tags/priorities enforcement in VST mode net/mlx4_core: Add missing report on VST and spoof-checking dev caps net: fec: enable hardware checksum only on imx6q-fec qlcnic: Fix validation of link event command. ...
-
由 Wei Yongjun 提交于
Add the missing iounmap() before return from bnad_init() in the error handling case. Introduced by commit 01b54b14 (bna: tx rx cleanup fix). Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
qlge allocates chunks from a page that it maps and unmaps that page when the last chunk is released. When the driver is unloaded or the card is removed, all chunks are released and the page is unmapped for the last chunk. However, when the last chunk of a page is not allocated and the device is removed, that page is not unmapped. In fact, its last reference is not put and there's also a page leak. This bug prevents a device from being properly hotplugged. When the DMA API debug option is enabled, the following messages show the pending DMA allocation after we remove the driver. This patch fixes the bug by unmapping and putting the page from the ring if its last chunk has not been allocated. pci 0005:98:00.0: DMA-API: device driver has pending DMA allocations while released from device [count=1] One of leaked entries details: [device address=0x0000000060a80000] [size=65536 bytes] [mapped with DMA_FROM_DEVICE] [mapped as page] ------------[ cut here ]------------ WARNING: at lib/dma-debug.c:746 Modules linked in: qlge(-) rpadlpar_io rpaphp pci_hotplug fuse [last unloaded: qlge] NIP: c0000000003fc3ec LR: c0000000003fc3e8 CTR: c00000000054de60 REGS: c0000003ee9c74e0 TRAP: 0700 Tainted: G O (3.7.2) MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI> CR: 28002424 XER: 00000001 SOFTE: 1 CFAR: c0000000007a39c8 TASK = c0000003ee8d5c90[8406] 'rmmod' THREAD: c0000003ee9c4000 CPU: 31 GPR00: c0000000003fc3e8 c0000003ee9c7760 c000000000c789f8 00000000000000ee GPR04: 0000000000000000 00000000000000ef 0000000000004000 0000000000010000 GPR08: 00000000000000be c000000000b22088 c000000000c4c218 00000000007c0000 GPR12: 0000000028002422 c00000000ff26c80 0000000000000000 000001001b0f1b40 GPR16: 00000000100cb9d8 0000000010093088 c000000000cdf910 0000000000000001 GPR20: 0000000000000000 c000000000dbfc00 0000000000000000 c000000000dbfb80 GPR24: c0000003fafc9d80 0000000000000001 000000000001ff80 c0000003f38f7888 GPR28: c000000000ddfc00 0000000000000400 c000000000bd7790 c000000000ddfb80 NIP [c0000000003fc3ec] .dma_debug_device_change+0x22c/0x2b0 LR [c0000000003fc3e8] .dma_debug_device_change+0x228/0x2b0 Call Trace: [c0000003ee9c7760] [c0000000003fc3e8] .dma_debug_device_change+0x228/0x2b0 (unreliable) [c0000003ee9c7840] [c00000000079a098] .notifier_call_chain+0x78/0xf0 [c0000003ee9c78e0] [c0000000000acc20] .__blocking_notifier_call_chain+0x70/0xb0 [c0000003ee9c7990] [c0000000004a9580] .__device_release_driver+0x100/0x140 [c0000003ee9c7a20] [c0000000004a9708] .driver_detach+0x148/0x150 [c0000003ee9c7ac0] [c0000000004a8144] .bus_remove_driver+0xc4/0x150 [c0000003ee9c7b60] [c0000000004aa58c] .driver_unregister+0x8c/0xe0 [c0000003ee9c7bf0] [c0000000004090b4] .pci_unregister_driver+0x34/0xf0 [c0000003ee9c7ca0] [d000000002231194] .qlge_exit+0x1c/0x34 [qlge] [c0000003ee9c7d20] [c0000000000e36d8] .SyS_delete_module+0x1e8/0x290 [c0000003ee9c7e30] [c0000000000098d4] syscall_exit+0x0/0x94 Instruction dump: 7f26cb78 e818003a e87e81a0 e8f80028 e9180030 796b1f24 78001f24 7d6a5a14 7d2a002a e94b0020 483a7595 60000000 <0fe00000> 2fb80000 40de0048 80120050 ---[ end trace 4294f9abdb01031d ]--- Mapped at: [<d000000002222f54>] .ql_update_lbq+0x384/0x580 [qlge] [<d000000002227bd0>] .ql_clean_inbound_rx_ring+0x300/0xc60 [qlge] [<d0000000022288cc>] .ql_napi_poll_msix+0x39c/0x5a0 [qlge] [<c0000000006b3c50>] .net_rx_action+0x170/0x300 [<c000000000081840>] .__do_softirq+0x170/0x300 Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Acked-by: NJitendra Kalsaria <Jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 5月, 2013 11 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi由 Linus Torvalds 提交于
Pull spi updates from Mark Brown: "A few driver specific fixes plus improved error handling in the generic DT GPIO chipselect handling - not exciting but useful." * tag 'spi-v3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi/spi-atmel: BUG: fix doesn' support 16 bits transfers using PIO spi/davinci: fix module build error spi: Return error from of_spi_register_master on bad "cs-gpios" property spi: Initialize cs_gpio and cs_gpios with -ENOENT spi/atmel: fix speed_hz check in atmel_spi_transfer()
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Just a few straggling fixes I hoovered up, and an intel fixes pull from Daniel which fixes some regressions, and some mgag200 fixes from Matrox." * 'drm-next' of git://people.freedesktop.org/~airlied/linux: drm/mgag200: Fix framebuffer base address programming drm/mgag200: Convert counter delays to jiffies drm/mgag200: Fix writes into MGA1064_PIX_CLK_CTL register drm/mgag200: Don't change unrelated registers during modeset drm: Only print a debug message when the polled connector has changed drm: Make the HPD status updates debug logs more readable drm: Use names of ioctls in debug traces drm: Remove pointless '-' characters from drm_fb_helper documentation drm: Add kernel-doc for drm_fb_helper_funcs->initial_config drm: refactor call to request_module drm: Don't prune modes loudly when a connector is disconnected drm: Add missing break in the command line mode parsing code drm/i915: clear the stolen fb before resuming Revert "drm/i915: Calculate correct stolen size for GEN7+" drm/i915: hsw: fix link training for eDP on port-A Revert "drm/i915: revert eDP bpp clamping code changes" drm: don't check modeset locks in panic handler drm/i915: Fix pipe enabled mask for pipe C in WM calculations drm/mm: fix dump table BUG drm/i915: Always normalize return timeout for wait_timeout_ioctl
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux由 Linus Torvalds 提交于
Pull virtio/lguest fixes from Rusty Russell: "Missing license tag and some fallout from the lguest pagetable rework" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: lguest: clear cached last cpu when guest_set_pgd() called. Add missing module license tag to vring helpers.
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Christopher Harvey 提交于
Higher bits of the base address of framebuffers weren't being programmed properly. This caused framebuffers that didn't happen to be allocated at a low enough address to not be displayed properly. Signed-off-by: NChristopher Harvey <charvey@matrox.com> Signed-off-by: NMathieu Larouche <mathieu.larouche@matrox.com> Acked-by: NJulia Lemire <jlemire@matrox.com> Tested-by: NJulia Lemire <jlemire@matrox.com> Cc: stable@vger.kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Christopher Harvey 提交于
Signed-off-by: NChristopher Harvey <charvey@matrox.com> Acked-by: NJulia Lemire <jlemire@matrox.com> Tested-by: NJulia Lemire <jlemire@matrox.com> Acked-by: NMathieu Larouche <mathieu.larouche@matrox.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Christopher Harvey 提交于
The original line, WREG_DAC(MGA1064_PIX_CLK_CTL_CLK_DIS, tmp); wrote tmp into MGA1064_PIX_CLK_CTL_CLK_DIS, where MGA1064_PIX_CLK_CTL_CLK_DIS is an offset into MGA1064_PIX_CLK_CTL. Change the line to write properly into MGA1064_PIX_CLK_CTL. There were other chunks of code nearby that use the same pattern (but work correctly), so this patch updates them all to use this new (slightly more efficient) write pattern. The WREG_DAC macro was causing the DAC_INDEX register to be set to the same value twice. WREG8(DAC_DATA, foo) takes advantage of the fact that DAC_INDEX is already at the value we want. Signed-off-by: NChristopher Harvey <charvey@matrox.com> Acked-by: NJulia Lemire <jlemire@matrox.com> Tested-by: NJulia Lemire <jlemire@matrox.com> Acked-by: NMathieu Larouche <mathieu.larouche@matrox.com> Cc: stable@vger.kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Christopher Harvey 提交于
Registers in indices below 0x18 are totally unrelated to modesetting, so don't write 0's, or anything else into them on modeset. Most of these registers are hardware cursor related, so this existing code interferes with hardware cursor development. Signed-off-by: NChristopher Harvey <charvey@matrox.com> Tested-by: NJulia Lemire <jlemire@matrox.com> Acked-by: NJulia Lemire <jlemire@matrox.com> Acked-by: NMathieu Larouche <mathieu.larouche@matrox.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Lespiau, Damien 提交于
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Lespiau, Damien 提交于
Instead of just printing "status updated from 1 to 2", make those enum numbers immediately readable. v2: Also patch output_poll_execute() (Daniel Vetter) v3: Use drm_get_connector_status_name (Ville Syrjälä) Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (for v1) Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 12 5月, 2013 11 次提交
-
-
由 Cong Wang 提交于
We forget to call dev_put() on error path in xfrm6_fill_dst(), its caller doesn't handle this. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amerigo Wang 提交于
There is a hole in struct ip6_tnl_parm2, so we have to zero the struct on stack before copying it to user-space. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amerigo Wang 提交于
Since commit 82dc3c63 ("net: introduce NAPI_POLL_WEIGHT") we warn drivers when they use napi weight higher than NAPI_POLL_WEIGHT, but virtio_net still uses 128 by default. This patch makes its default value to NAPI_POLL_WEIGHT. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petri Gynther 提交于
Fix EMAC soft reset on 460EX/GT to select the right PHY clock source before and after the soft reset. EMAC with PHY should use the clock from PHY during soft reset. EMAC without PHY should use the internal clock during soft reset. PPC460EX/GT Embedded Processor Advanced User's Manual section 28.10.1 Mode Register 0 (EMACx_MR0) states: Note: The PHY must provide a TX Clk in order to perform a soft reset of the EMAC. If none is present, select the internal clock (SDR0_ETH_CFG[EMACx_PHY_CLK] = 1). After a soft reset, select the external clock. Without the fix, 460EX/GT-based boards with RGMII PHYs attached to EMACs experience EMAC interrupt storm and system watchdog reset when issuing "ifconfig eth0 down" + "ifconfig eth0 up" a few times. The system enters endless loop of serving emac_irq() with EMACx_ISR register stuck at value 0x10000000 (Rx parity error). With the fix, the above issue is no longer observed. Signed-off-by: NPetri Gynther <pgynther@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
The driver wrongly claimed I/O ports at an address returned by pci_iomap() -- even if it was passed an MMIO address. Fix this by claiming/releasing all PCI resources in the PCI driver's probe()/remove() methods instead and get rid of 'must_free_region' flag weirdness (why would Cardbus claim anything for us?). Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace由 Linus Torvalds 提交于
Pull tracing/kprobes update from Steven Rostedt: "The majority of these changes are from Masami Hiramatsu bringing kprobes up to par with the latest changes to ftrace (multi buffering and the new function probes). He also discovered and fixed some bugs in doing so. When pulling in his patches, I also found a few minor bugs as well and fixed them. This also includes a compile fix for some archs that select the ring buffer but not tracing. I based this off of the last patch you took from me that fixed the merge conflict error, as that was the commit that had all the changes I needed for this set of changes." * tag 'trace-fixes-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/kprobes: Support soft-mode disabling tracing/kprobes: Support ftrace_event_file base multibuffer tracing/kprobes: Pass trace_probe directly from dispatcher tracing/kprobes: Increment probe hit-count even if it is used by perf tracing/kprobes: Use bool for retprobe checker ftrace: Fix function probe when more than one probe is added ftrace: Fix the output of enabled_functions debug file ftrace: Fix locking in register_ftrace_function_probe() tracing: Add helper function trace_create_new_event() to remove duplicate code tracing: Modify soft-mode only if there's no other referrer tracing: Indicate enabled soft-mode in enable file tracing/kprobes: Fix to increment return event probe hit-count ftrace: Cleanup regex_lock and ftrace_lock around hash updating ftrace, kprobes: Fix a deadlock on ftrace_regex_lock ftrace: Have ftrace_regex_write() return either read or error tracing: Return error if register_ftrace_function_probe() fails for event_enable_func() tracing: Don't succeed if event_enable_func did not register anything ring-buffer: Select IRQ_WORK
-
由 Geert Uytterhoeven 提交于
If NO_DMA=y: drivers/built-in.o: In function `cfv_destroy_genpool': drivers/net/caif/caif_virtio.c:364: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `cfv_create_genpool': drivers/net/caif/caif_virtio.c:397: undefined reference to `dma_alloc_coherent' Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geert Uytterhoeven 提交于
If NO_DMA=y: drivers/built-in.o: In function `macb_free_consistent': drivers/net/ethernet/cadence/macb.c:878: undefined reference to `dma_free_coherent' drivers/net/ethernet/cadence/macb.c:883: undefined reference to `dma_free_coherent' drivers/net/ethernet/cadence/macb.c:888: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `macb_alloc_consistent': drivers/net/ethernet/cadence/macb.c:905: undefined reference to `dma_alloc_coherent' drivers/built-in.o: In function `macb_tx_interrupt': drivers/net/ethernet/cadence/macb.c:515: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `macb_tx_error_task': drivers/net/ethernet/cadence/macb.c:457: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `macb_start_xmit': drivers/net/ethernet/cadence/macb.c:838: undefined reference to `dma_map_single' Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geert Uytterhoeven 提交于
If NO_DMA=y: drivers/built-in.o: In function `at91ether_start': drivers/net/ethernet/cadence/at91_ether.c:49: undefined reference to `dma_alloc_coherent' drivers/net/ethernet/cadence/at91_ether.c:60: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `at91ether_interrupt': drivers/net/ethernet/cadence/at91_ether.c:250: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `at91ether_start_xmit': drivers/net/ethernet/cadence/at91_ether.c:169: undefined reference to `dma_map_single' drivers/built-in.o: In function `at91ether_close': drivers/net/ethernet/cadence/at91_ether.c:145: undefined reference to `dma_free_coherent' Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geert Uytterhoeven 提交于
If NO_DMA=y: drivers/built-in.o: In function `ath9k_beacon_generate': drivers/net/wireless/ath/ath9k/beacon.c:146: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath9k/beacon.c:174: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/beacon.c:176: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath9k_beacon_remove_slot': drivers/net/wireless/ath/ath9k/beacon.c:252: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_descdma_setup': drivers/net/wireless/ath/ath9k/init.c:382: undefined reference to `dmam_alloc_coherent' drivers/built-in.o: In function `ath_edma_get_buffers': drivers/net/wireless/ath/ath9k/recv.c:616: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_get_next_rx_buf': drivers/net/wireless/ath/ath9k/recv.c:740: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_rx_edma_cleanup': drivers/net/wireless/ath/ath9k/recv.c:176: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_cleanup': drivers/net/wireless/ath/ath9k/recv.c:340: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_edma_buf_link': drivers/net/wireless/ath/ath9k/recv.c:122: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_rx_tasklet': drivers/net/wireless/ath/ath9k/recv.c:1275: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:1277: undefined reference to `dma_mapping_error' drivers/net/wireless/ath/ath9k/recv.c:1283: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_edma_init': drivers/net/wireless/ath/ath9k/recv.c:226: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:229: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath_rx_init': drivers/net/wireless/ath/ath9k/recv.c:303: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:306: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath_tx_complete_buf': drivers/net/wireless/ath/ath9k/xmit.c:2088: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_txstatus_setup': drivers/net/wireless/ath/ath9k/xmit.c:2344: undefined reference to `dmam_alloc_coherent' drivers/built-in.o: In function `ath_tx_set_retry': drivers/net/wireless/ath/ath9k/xmit.c:307: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_tx_setup_buffer': drivers/net/wireless/ath/ath9k/xmit.c:1887: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/xmit.c:1889: undefined reference to `dma_mapping_error' Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-