__blk_mq_requeue_request() covers two cases:

- one is that the requeued request is added to hctx->dispatch, such as
blk_mq_dispatch_rq_list()

- another case is that the request is requeued to io scheduler, such as
blk_mq_requeue_request().

We should call io sched's .requeue_request callback only for the 2nd
case.

Cc: Paolo Valente <paolo.valente@linaro.org>
Cc: Omar Sandoval <osandov@fb.com>
Fixes: bd166ef1 ("blk-mq-sched: add framework for MQ capable IO schedulers")
Cc: stable@vger.kernel.org
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Acked-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This removes the dependency on interrupts to wake up task. Set task
state as TASK_RUNNING, if need_resched() returns true,
while polling for IO completion.
Earlier, polling task used to sleep, relying on interrupt to wake it up.
This made some IO take very long when interrupt-coalescing is enabled in
NVMe.

Reference:
http://lists.infradead.org/pipermail/linux-nvme/2018-February/015435.html

Changes since v2->v3:
	-using __set_current_state() instead of set_current_state()

Changes since v1->v2:
	-setting task state once in blk_poll, instead of multiple
callers.
Signed-off-by: NNitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This status is returned from driver to block layer if device related
resource is unavailable, but driver can guarantee that IO dispatch
will be triggered in future when the resource is available.

Convert some drivers to return BLK_STS_DEV_RESOURCE.  Also, if driver
returns BLK_STS_RESOURCE and SCHED_RESTART is set, rerun queue after
a delay (BLK_MQ_DELAY_QUEUE) to avoid IO stalls.  BLK_MQ_DELAY_QUEUE is
3 ms because both scsi-mq and nvmefc are using that magic value.

If a driver can make sure there is in-flight IO, it is safe to return
BLK_STS_DEV_RESOURCE because:

1) If all in-flight IOs complete before examining SCHED_RESTART in
blk_mq_dispatch_rq_list(), SCHED_RESTART must be cleared, so queue
is run immediately in this case by blk_mq_dispatch_rq_list();

2) if there is any in-flight IO after/when examining SCHED_RESTART
in blk_mq_dispatch_rq_list():
- if SCHED_RESTART isn't set, queue is run immediately as handled in 1)
- otherwise, this request will be dispatched after any in-flight IO is
  completed via blk_mq_sched_restart()

3) if SCHED_RESTART is set concurently in context because of
BLK_STS_RESOURCE, blk_mq_delay_run_hw_queue() will cover the above two
cases and make sure IO hang can be avoided.

One invariant is that queue will be rerun if SCHED_RESTART is set.
Suggested-by: NJens Axboe <axboe@kernel.dk>
Tested-by: NLaurence Oberman <loberman@redhat.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Make sure that calling blk_mq_run_hw_queue() or
blk_mq_kick_requeue_list() triggers a queue run without delay even
if blk_mq_delay_run_hw_queue() has been called recently and if its
delay has not yet expired.
Reviewed-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Most blk-mq functions have a name that follows the pattern blk_mq_${action}.
However, the function name blk_mq_request_direct_issue is an exception.
Hence rename this function. This patch does not change any functionality.
Reviewed-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If we run into blk_mq_request_direct_issue(), when queue is busy, we
don't want to dispatch this request into hctx->dispatch_list, and
what we need to do is to return the queue busy info to caller, so
that caller can deal with it well.

Fixes: 396eaf21 ("blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback")
Reported-by: NLaurence Oberman <loberman@redhat.com>
Reviewed-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

After commit:

923218f6 ("blk-mq: don't allocate driver tag upfront for flush rq")

we no longer use the 'can_block' argument in
blk_mq_sched_insert_request(). Kill it.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Added actual commit message as to why it's being removed.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blk_insert_cloned_request() is called in the fast path of a dm-rq driver
(e.g. blk-mq request-based DM mpath).  blk_insert_cloned_request() uses
blk_mq_request_bypass_insert() to directly append the request to the
blk-mq hctx->dispatch_list of the underlying queue.

1) This way isn't efficient enough because the hctx spinlock is always
used.

2) With blk_insert_cloned_request(), we completely bypass underlying
queue's elevator and depend on the upper-level dm-rq driver's elevator
to schedule IO.  But dm-rq currently can't get the underlying queue's
dispatch feedback at all.  Without knowing whether a request was issued
or not (e.g. due to underlying queue being busy) the dm-rq elevator will
not be able to provide effective IO merging (as a side-effect of dm-rq
currently blindly destaging a request from its elevator only to requeue
it after a delay, which kills any opportunity for merging).  This
obviously causes very bad sequential IO performance.

Fix this by updating blk_insert_cloned_request() to use
blk_mq_request_direct_issue().  blk_mq_request_direct_issue() allows a
request to be issued directly to the underlying queue and returns the
dispatch feedback (blk_status_t).  If blk_mq_request_direct_issue()
returns BLK_SYS_RESOURCE the dm-rq driver will now use DM_MAPIO_REQUEUE
to _not_ destage the request.  Whereby preserving the opportunity to
merge IO.

With this, request-based DM's blk-mq sequential IO performance is vastly
improved (as much as 3X in mpath/virtio-scsi testing).
Signed-off-by: NMing Lei <ming.lei@redhat.com>
[blk-mq.c changes heavily influenced by Ming Lei's initial solution, but
they were refactored to make them less fragile and easier to read/review]
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

No functional change.  Just makes code flow more logically.

In following commit, __blk_mq_try_issue_directly() will be used to
return the dispatch result (blk_status_t) to DM.  DM needs this
information to improve IO merging.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We know this WARN_ON is harmless and in reality it may be trigged,
so convert it to printk() and dump_stack() to avoid to confusing
people.

Also add comment about two releated races here.

Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Stefan Haberland <sth@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "jianchao.wang" <jianchao.w.wang@oracle.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When hctx->next_cpu is set from possible online CPUs, there is one
race in which hctx->next_cpu may be set as >= nr_cpu_ids, and finally
break workqueue.

The race can be triggered in the following two sitations:

1) when one CPU is becoming DEAD, blk_mq_hctx_notify_dead() is called
to dispatch requests from the DEAD cpu context, but at that
time, this DEAD CPU has been cleared from 'cpu_online_mask', so all
CPUs in hctx->cpumask may become offline, and cause hctx->next_cpu set
a bad value.

2) blk_mq_delay_run_hw_queue() is called from CPU B, and found the queue
should be run on the other CPU A, then CPU A may become offline at the
same time and all CPUs in hctx->cpumask become offline.

This patch deals with this issue by re-selecting next CPU, and making
sure it is set correctly.

Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Stefan Haberland <sth@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: N"jianchao.wang" <jianchao.w.wang@oracle.com>
Tested-by: N"jianchao.wang" <jianchao.w.wang@oracle.com>
Fixes: 20e4d813 ("blk-mq: simplify queue mapping & schedule with each possisble CPU")
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

A previous commit moved the clearing of rq->rq_flags later,
but we may have already set RQF_MQ_INFLIGHT when that happens.
Ensure that we correctly initialize rq->rq_flags to the
right value.

This is based on an original fix by Ming, just rewritten to not
require a conditional.

Fixes: 7c3fb70f ("block: rearrange a few request fields for better cache layout")
Reviewed-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The previous patch assigns interrupt vectors to all possible CPUs, so
now hctx can be mapped to possible CPUs, this patch applies this fact
to simplify queue mapping & schedule so that we don't need to handle
CPU hotplug for dealing with physical CPU plug & unplug. With this
simplication, we can work well on physical CPU plug & unplug, which
is a normal use case for VM at least.

Make sure we allocate blk_mq_ctx structures for all possible CPUs, and
set hctx->numa_node for possible CPUs which are mapped to this hctx. And
only choose the online CPUs for schedule.
Reported-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Tested-by: NStefan Haberland <sth@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Fixes: 4b855ad3 ("blk-mq: Create hctx for each present CPU")
(merged the three into one because any single one may not work, and fix
selecting online CPUs for scheduler)
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch does not change any functionality but makes the
blk_mq_mark_tag_wait() code slightly easier to read.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch avoids that sparse reports the following:

block/blk-mq.c:637:33: warning: context imbalance in 'hctx_unlock' - unexpected unlock
block/blk-mq.c:642:9: warning: context imbalance in 'hctx_lock' - wrong count at exit
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Move completion related items (like the call single data) near the
end of the struct, instead of mixing them in with the initial
queueing related fields.

Move queuelist below the bio structures. Then we have all
queueing related bits in the first cache line.

This yields a 1.5-2% increase in IOPS for a null_blk test, both for
sync and for high thread count access. Sync test goes form 975K to
992K, 32-thread case from 20.8M to 21.2M IOPS.
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We only have one atomic flag left. Instead of using an entire
unsigned long for that, steal the bottom bit of the deadline
field that we already reserved.

Remove ->atomic_flags, since it's now unused.
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We reduce the resolution of request expiry, but since we're already
using jiffies for this where resolution depends on the kernel
configuration and since the timeout resolution is coarse anyway,
that should be fine.
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We don't need this to be an atomic flag, it can be a regular
flag. We either end up on the same CPU for the polling, in which
case the state is sane, or we did the sleep which would imply
the needed barrier to ensure we see the right state.
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

It is nontrivial to derive from the blk-mq source code when
blk_mq_tags.active_queues is decremented. Hence add a comment that
explains this.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Change "nedeing" into "needing" and "caes" into "cases".

Fixes: commit f906a6a0 ("blk-mq: improve tag waiting setup for non-shared tags")
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In some stupider versions of gcc, it complains:

block/blk-mq.c: In function ‘blk_mq_complete_request’:
./include/linux/srcu.h:175:2: warning: ‘srcu_idx’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  __srcu_read_unlock(sp, idx);
  ^
block/blk-mq.c:620:6: note: ‘srcu_idx’ was declared here
  int srcu_idx;
      ^

which is completely bogus, since we only use srcu_idx when
hctx->flags & BLK_MQ_F_BLOCKING is set, and that's the case where
hctx_lock() has initialized it.

Just set it to '0' in the normal path in hctx_lock() to silence
this annoying warning.

Fixes: 04ced159 ("blk-mq: move hctx lock/unlock into a helper")
Fixes: 5197c05e ("blk-mq: protect completion path with RCU")
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The RCU protection has been expanded to cover both queueing and
completion paths making ->queue_rq_srcu a misnomer.  Rename it to
->srcu as suggested by Bart.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Bart Van Assche <Bart.VanAssche@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

After the recent updates to use generation number and state based
synchronization, we can easily replace REQ_ATOM_STARTED usages by
adding an extra state to distinguish completed but not yet freed
state.

Add MQ_RQ_COMPLETE and replace REQ_ATOM_STARTED usages with
blk_mq_rq_state() tests.  REQ_ATOM_STARTED no longer has any users
left and is removed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

After the recent updates to use generation number and state based
synchronization, blk-mq no longer depends on REQ_ATOM_COMPLETE except
to avoid firing the same timeout multiple times.

Remove all REQ_ATOM_COMPLETE usages and use a new rq_flags flag
RQF_MQ_TIMEOUT_EXPIRED to avoid firing the same timeout multiple
times.  This removes atomic bitops from hot paths too.

v2: Removed blk_clear_rq_complete() from blk_mq_rq_timed_out().

v3: Added RQF_MQ_TIMEOUT_EXPIRED flag.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: "jianchao.wang" <jianchao.w.wang@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

With issue/complete and timeout paths now using the generation number
and state based synchronization, blk_abort_request() is the only one
which depends on REQ_ATOM_COMPLETE for arbitrating completion.

There's no reason for blk_abort_request() to be a completely separate
path.  This patch makes blk_abort_request() piggyback on the timeout
path instead of trying to terminate the request directly.

This removes the last dependency on REQ_ATOM_COMPLETE in blk-mq.

Note that this makes blk_abort_request() asynchronous - it initiates
abortion but the actual termination will happen after a short while,
even when the caller owns the request.  AFAICS, SCSI and ATA should be
fine with that and I think mtip32xx and dasd should be safe but not
completely sure.  It'd be great if people who know the drivers take a
look.

v2: - Add comment explaining the lack of synchronization around
      ->deadline update as requested by Bart.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Asai Thambi SP <asamymuthupa@micron.com>
Cc: Stefan Haberland <sth@linux.vnet.ibm.com>
Cc: Jan Hoeppner <hoeppner@linux.vnet.ibm.com>
Cc: Bart Van Assche <Bart.VanAssche@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blk_mq_check_inflight() and blk_mq_poll_hybrid_sleep() test
REQ_ATOM_COMPLETE to determine the request state.  Both uses are
speculative and we can test REQ_ATOM_STARTED and blk_mq_rq_state() for
equivalent results.  Replace the tests.  This will allow removing
REQ_ATOM_COMPLETE usages from blk-mq.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, blk-mq timeout path synchronizes against the usual
issue/completion path using a complex scheme involving atomic
bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence
rules.  Unfortunately, it contains quite a few holes.

There's a complex dancing around REQ_ATOM_STARTED and
REQ_ATOM_COMPLETE between issue/completion and timeout paths; however,
they don't have a synchronization point across request recycle
instances and it isn't clear what the barriers add.
blk_mq_check_expired() can easily read STARTED from N-2'th iteration,
deadline from N-1'th, blk_mark_rq_complete() against Nth instance.

In fact, it's pretty easy to make blk_mq_check_expired() terminate a
later instance of a request.  If we induce 5 sec delay before
time_after_eq() test in blk_mq_check_expired(), shorten the timeout to
2s, and issue back-to-back large IOs, blk-mq starts timing out
requests spuriously pretty quickly.  Nothing actually timed out.  It
just made the call on a recycle instance of a request and then
terminated a later instance long after the original instance finished.
The scenario isn't theoretical either.

This patch replaces the broken synchronization mechanism with a RCU
and generation number based one.

1. Each request has a u64 generation + state value, which can be
   updated only by the request owner.  Whenever a request becomes
   in-flight, the generation number gets bumped up too.  This provides
   the basis for the timeout path to distinguish different recycle
   instances of the request.

   Also, marking a request in-flight and setting its deadline are
   protected with a seqcount so that the timeout path can fetch both
   values coherently.

2. The timeout path fetches the generation, state and deadline.  If
   the verdict is timeout, it records the generation into a dedicated
   request abortion field and does RCU wait.

3. The completion path is also protected by RCU (from the previous
   patch) and checks whether the current generation number and state
   match the abortion field.  If so, it skips completion.

4. The timeout path, after RCU wait, scans requests again and
   terminates the ones whose generation and state still match the ones
   requested for abortion.

   By now, the timeout path knows that either the generation number
   and state changed if it lost the race or the completion will yield
   to it and can safely timeout the request.

While it's more lines of code, it's conceptually simpler, doesn't
depend on direct use of subtle memory ordering or coherence, and
hopefully doesn't terminate the wrong instance.

While this change makes REQ_ATOM_COMPLETE synchronization unnecessary
between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't
removed yet as it's still used in other places.  Future patches will
move all state tracking to the new mechanism and remove all bitops in
the hot paths.

Note that this patch adds a comment explaining a race condition in
BLK_EH_RESET_TIMER path.  The race has always been there and this
patch doesn't change it.  It's just documenting the existing race.

v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao.
    - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter.
    - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter.

v3: - Fixed possible extended seqcount / u64_stats_sync read looping
      spotted by Peter.
    - MQ_RQ_IDLE was incorrectly being set in complete_request instead
      of free_request.  Fixed.

v4: - Rebased on top of hctx_lock() refactoring patch.
    - Added comment explaining the use of hctx_lock() in completion path.

v5: - Added comments requested by Bart.
    - Note the addition of BLK_EH_RESET_TIMER race condition in the
      commit message.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: "jianchao.wang" <jianchao.w.wang@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <Bart.VanAssche@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, blk-mq protects only the issue path with RCU.  This patch
puts the completion path under the same RCU protection.  This will be
used to synchronize issue/completion against timeout by later patches,
which will also add the comments.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Move the RCU vs SRCU logic into lock/unlock helpers, which makes
the actual functional bits within the locked region much easier
to read.

tj: Reordered in front of timeout revamp patches and added the missing
    blk_mq_run_hw_queue() conversion.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

HW queues may be unmapped in some cases, such as blk_mq_update_nr_hw_queues(),
then we need to check it before calling blk_mq_tag_idle(), otherwise
the following kernel oops can be triggered, so fix it by checking if
the hw queue is unmapped since it doesn't make sense to idle the tags
any more after hw queues are unmapped.

[  440.771298] Workqueue: nvme-wq nvme_rdma_del_ctrl_work [nvme_rdma]
[  440.779104] task: ffff894bae755ee0 ti: ffff893bf9bc8000 task.ti: ffff893bf9bc8000
[  440.788359] RIP: 0010:[<ffffffffb730e2b4>]  [<ffffffffb730e2b4>] __blk_mq_tag_idle+0x24/0x40
[  440.798697] RSP: 0018:ffff893bf9bcbd10  EFLAGS: 00010286
[  440.805538] RAX: 0000000000000000 RBX: ffff895bb131dc00 RCX: 000000000000011f
[  440.814426] RDX: 00000000ffffffff RSI: 0000000000000120 RDI: ffff895bb131dc00
[  440.823301] RBP: ffff893bf9bcbd10 R08: 000000000001b860 R09: 4a51d361c00c0000
[  440.832193] R10: b5907f32b4cc7003 R11: ffffd6cabfb57000 R12: ffff894bafd1e008
[  440.841091] R13: 0000000000000001 R14: ffff895baf770000 R15: 0000000000000080
[  440.849988] FS:  0000000000000000(0000) GS:ffff894bbdcc0000(0000) knlGS:0000000000000000
[  440.859955] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  440.867274] CR2: 0000000000000008 CR3: 000000103d098000 CR4: 00000000001407e0
[  440.876169] Call Trace:
[  440.879818]  [<ffffffffb7309d68>] blk_mq_exit_hctx+0xd8/0xe0
[  440.887051]  [<ffffffffb730dc40>] blk_mq_free_queue+0xf0/0x160
[  440.894465]  [<ffffffffb72ff679>] blk_cleanup_queue+0xd9/0x150
[  440.901881]  [<ffffffffc08a802b>] nvme_ns_remove+0x5b/0xb0 [nvme_core]
[  440.910068]  [<ffffffffc08a811b>] nvme_remove_namespaces+0x3b/0x60 [nvme_core]
[  440.919026]  [<ffffffffc08b817b>] __nvme_rdma_remove_ctrl+0x2b/0xb0 [nvme_rdma]
[  440.928079]  [<ffffffffc08b8237>] nvme_rdma_del_ctrl_work+0x17/0x20 [nvme_rdma]
[  440.937126]  [<ffffffffb70ab58a>] process_one_work+0x17a/0x440
[  440.944517]  [<ffffffffb70ac3a8>] worker_thread+0x278/0x3c0
[  440.951607]  [<ffffffffb70ac130>] ? manage_workers.isra.24+0x2a0/0x2a0
[  440.959760]  [<ffffffffb70b352f>] kthread+0xcf/0xe0
[  440.966055]  [<ffffffffb70b3460>] ? insert_kthread_work+0x40/0x40
[  440.973715]  [<ffffffffb76d8658>] ret_from_fork+0x58/0x90
[  440.980586]  [<ffffffffb70b3460>] ? insert_kthread_work+0x40/0x40
[  440.988229] Code: 5b 41 5c 5d c3 66 90 0f 1f 44 00 00 48 8b 87 20 01 00 00 f0 0f ba 77 40 01 19 d2 85 d2 75 08 c3 0f 1f 80 00 00 00 00 55 48 89 e5 <f0> ff 48 08 48 8d 78 10 e8 7f 0f 05 00 5d c3 0f 1f 00 66 2e 0f
[  441.011620] RIP  [<ffffffffb730e2b4>] __blk_mq_tag_idle+0x24/0x40
[  441.019301]  RSP <ffff893bf9bcbd10>
[  441.024052] CR2: 0000000000000008
Reported-by: NZhang Yi <yizhan@redhat.com>
Tested-by: NZhang Yi <yizhan@redhat.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In both elevator_switch_mq() and blk_mq_update_nr_hw_queues(), sched tags
can be allocated, and q->nr_hw_queue is used, and race is inevitable, for
example: blk_mq_init_sched() may trigger use-after-free on hctx, which is
freed in blk_mq_realloc_hw_ctxs() when nr_hw_queues is decreased.

This patch fixes the race be holding q->sysfs_lock.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reported-by: NYi Zhang <yi.zhang@redhat.com>
Tested-by: NYi Zhang <yi.zhang@redhat.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blk_mq_pci_map_queues() may not map one CPU into any hw queue, but its
previous map isn't cleared yet, and may point to one stale hw queue
index.

This patch fixes the following issue by clearing the mapping table before
setting it up in blk_mq_pci_map_queues().

This patches fixes this following issue reported by Zhang Yi:

[  101.202734] BUG: unable to handle kernel NULL pointer dereference at 0000000094d3013f
[  101.211487] IP: blk_mq_map_swqueue+0xbc/0x200
[  101.216346] PGD 0 P4D 0
[  101.219171] Oops: 0000 [#1] SMP
[  101.222674] Modules linked in: sunrpc ipmi_ssif vfat fat intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate intel_uncore mxm_wmi intel_rapl_perf iTCO_wdt ipmi_si ipmi_devintf pcspkr iTCO_vendor_support sg dcdbas ipmi_msghandler wmi mei_me lpc_ich shpchp mei acpi_power_meter dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ahci libahci crc32c_intel libata tg3 nvme nvme_core megaraid_sas ptp i2c_core pps_core dm_mirror dm_region_hash dm_log dm_mod
[  101.284881] CPU: 0 PID: 504 Comm: kworker/u25:5 Not tainted 4.15.0-rc2 #1
[  101.292455] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.5.5 08/16/2017
[  101.301001] Workqueue: nvme-wq nvme_reset_work [nvme]
[  101.306636] task: 00000000f2c53190 task.stack: 000000002da874f9
[  101.313241] RIP: 0010:blk_mq_map_swqueue+0xbc/0x200
[  101.318681] RSP: 0018:ffffc9000234fd70 EFLAGS: 00010282
[  101.324511] RAX: ffff88047ffc9480 RBX: ffff88047e130850 RCX: 0000000000000000
[  101.332471] RDX: ffffe8ffffd40580 RSI: ffff88047e509b40 RDI: ffff88046f37a008
[  101.340432] RBP: 000000000000000b R08: ffff88046f37a008 R09: 0000000011f94280
[  101.348392] R10: ffff88047ffd4d00 R11: 0000000000000000 R12: ffff88046f37a008
[  101.356353] R13: ffff88047e130f38 R14: 000000000000000b R15: ffff88046f37a558
[  101.364314] FS:  0000000000000000(0000) GS:ffff880277c00000(0000) knlGS:0000000000000000
[  101.373342] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  101.379753] CR2: 0000000000000098 CR3: 000000047f409004 CR4: 00000000001606f0
[  101.387714] Call Trace:
[  101.390445]  blk_mq_update_nr_hw_queues+0xbf/0x130
[  101.395791]  nvme_reset_work+0x6f4/0xc06 [nvme]
[  101.400848]  ? pick_next_task_fair+0x290/0x5f0
[  101.405807]  ? __switch_to+0x1f5/0x430
[  101.409988]  ? put_prev_entity+0x2f/0xd0
[  101.414365]  process_one_work+0x141/0x340
[  101.418836]  worker_thread+0x47/0x3e0
[  101.422921]  kthread+0xf5/0x130
[  101.426424]  ? rescuer_thread+0x380/0x380
[  101.430896]  ? kthread_associate_blkcg+0x90/0x90
[  101.436048]  ret_from_fork+0x1f/0x30
[  101.440034] Code: 48 83 3c ca 00 0f 84 2b 01 00 00 48 63 cd 48 8b 93 10 01 00 00 8b 0c 88 48 8b 83 20 01 00 00 4a 03 14 f5 60 04 af 81 48 8b 0c c8 <48> 8b 81 98 00 00 00 f0 4c 0f ab 30 8b 81 f8 00 00 00 89 42 44
[  101.461116] RIP: blk_mq_map_swqueue+0xbc/0x200 RSP: ffffc9000234fd70
[  101.468205] CR2: 0000000000000098
[  101.471907] ---[ end trace 5fe710f98228a3ca ]---
[  101.482489] Kernel panic - not syncing: Fatal exception
[  101.488505] Kernel Offset: disabled
[  101.497752] ---[ end Kernel panic - not syncing: Fatal exception
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Suggested-by: NChristoph Hellwig <hch@lst.de>
Reported-by: NYi Zhang <yi.zhang@redhat.com>
Tested-by: NYi Zhang <yi.zhang@redhat.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Dispatch may still be in-progress after queue is frozen, so we have to
quiesce queue before switching IO scheduler and updating nr_requests.

Also when switching io schedulers, blk_mq_run_hw_queue() may still be
called somewhere(such as from nvme_reset_work()), and io scheduler's
per-hctx data may not be setup yet, so cause oops even inside
blk_mq_hctx_has_pending(), such as it can be run just between:

        ret = e->ops.mq.init_sched(q, e);
AND
        ret = e->ops.mq.init_hctx(hctx, i)

inside blk_mq_init_sched().

This reverts commit 7a148c2f(block: don't call blk_mq_quiesce_queue()
after queue is frozen) basically, and makes sure blk_mq_hctx_has_pending
won't be called if queue is quiesced.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Fixes: 7a148c2f(block: don't call blk_mq_quiesce_queue() after queue is frozen)
Reported-by: NYi Zhang <yi.zhang@redhat.com>
Tested-by: NYi Zhang <yi.zhang@redhat.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Now we track legacy requests with .q_usage_counter in commit 055f6e18
("block: Make q_usage_counter also track legacy requests"), but that
commit never runs and drains legacy queue before waiting for this counter
becoming zero, then IO hang is caused in the test of pulling disk during IO.

This patch fixes the issue by draining requests before waiting for
q_usage_counter becoming zero, both Mauricio and chenxiang reported this
issue, and observed that it can be fixed by this patch.

Link: https://marc.info/?l=linux-block&m=151192424731797&w=2
Fixes: 055f6e18("block: Make q_usage_counter also track legacy requests")
Cc: Wen Xiong <wenxiong@us.ibm.com>
Tested-by: N"chenxiang (M)" <chenxiang66@hisilicon.com>
Tested-by: NMauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Now that we have a NUMA-aware version of kmalloc_array() we can use it
instead of kmalloc_node() without an overflow check in the size
calculation.

Link: http://lkml.kernel.org/r/20170927082038.3782-3-jthumshirn@suse.deSigned-off-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NChristoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: Mike Marciniszyn <infinipath@intel.com>
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Various typos and/or spelling errors in comments. Fixes a few > 80 char
lines as well.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If we run out of driver tags, we currently treat shared and non-shared
tags the same - both cases hook into the tag waitqueue. This is a bit
more costly than it needs to be on unshared tags, since we have to both
grab the hctx lock, and the waitqueue lock (and disable interrupts).
For the non-shared case, we can simply mark the queue as needing a
restart.

Split blk_mq_dispatch_wait_add() to account for both cases, and
rename it to blk_mq_mark_tag_wait() to better reflect what it
does now.

Without this patch, shared and non-shared performance is about the same
with 4 fio thread hammering on a single null_blk device (~410K, at 75%
sys). With the patch, the shared case is the same, but the non-shared
tags case runs at 431K at 71% sys.
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently we are inconsistent in when we decide to run the queue. Using
blk_mq_run_hw_queues() we check if the hctx has pending IO before
running it, but we don't do that from the individual queue run function,
blk_mq_run_hw_queue(). This results in a lot of extra and pointless
queue runs, potentially, on flush requests and (much worse) on tag
starvation situations. This is observable just looking at top output,
with lots of kworkers active. For the !async runs, it just adds to the
CPU overhead of blk-mq.

Move the has-pending check into the run function instead of having
callers do it.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Several block layer and NVMe core functions accept a combination
of BLK_MQ_REQ_* flags through the 'flags' argument but there is
no verification at compile time whether the right type of block
layer flags is passed. Make it possible for sparse to verify this.
This patch does not change any functionality.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Tested-by: NOleksandr Natalenko <oleksandr@natalenko.name>
Cc: linux-nvme@lists.infradead.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>