vfs_mkdir() gets int, but immediately drops everything that might not
fit into umode_t and that's the only caller of ->mkdir()...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Seeing that just about every destructor got that INIT_LIST_HEAD() copied into
it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once();
the cost of taking it into inode_init_always() will be negligible for pipes
and sockets and negative for everything else.  Not to mention the removal of
boilerplate code from ->destroy_inode() instances...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Replace remaining direct i_nlink updates with a new set_nlink()
updater function.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Tested-by: NToshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

..to allow forcing of either compression scheme.  This will override
compiled-in defaults.  jffs2_compress is reworked a bit, as the lzo/zlib
override shares lots of code w/ the PRIORITY mode.

v2: update show_options accordingly.
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@intel.com>

Currently jffs2 has compile-time constants (and .config options)
controlling whether or not the various compression/decompression
drivers are built in and enabled.  This is fine for embedded
systems, but it clashes with distribution kernels.  Distro kernels
tend to turn on everything; this causes OpenFirmware to fall
over, as it understands ZLIB-compressed inodes.  Booting a kernel
that has LZO compression enabled, writing to the boot partition,
and then rebooting causes OFW to fail to read the kernel from
the filesystem.  This is because LZO compression has priority
when writing new data to jffs2, if LZO is enabled.

This patch adds mount option parsing, and a single supported
option ("compr=none").  This adds the flexibility of being
able to specify which compressor overrides on a per-superblock
basis.  For now, we can simply disable compression;
additional flexibility coming soon.

v2: kill some printks, and implement show_options as suggested
by Artem Bityutskiy.
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@intel.com>

These modes are not necessarily for OOB only. Particularly, MTD_OOB_RAW
affected operations on in-band page data as well. To clarify these
options and to emphasize that their effect is applied per-operation, we
change the primary prefix to MTD_OPS_.
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@intel.com>

Use a helper to test if a mutex is held instead of a hack with
mutex_trylock().
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: NArtem Bityutskiy <dedekind1@gmail.com>

kfree() deals gracefully with NULL pointers, so it's pointless to test for
one prior to calling it.
This removes such a test from jffs2_scan_medium().
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NArtem Bityutskiy <dedekind1@gmail.com>

... so that &inode->i_mode could be passed to it
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

so we can pass &inode->i_mode to it
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

it's S_ISLNK(mode), TYVM...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Replace the ->check_acl method with a ->get_acl method that simply reads an
ACL from disk after having a cache miss.  This means we can replace the ACL
checking boilerplate code with a single implementation in namei.c.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

new helper: posix_acl_create(&acl, gfp, mode_p).  Replaces acl with
modified clone, on failure releases acl and replaces with NULL.
Returns 0 or -ve on error.  All callers of posix_acl_create_masq()
switched.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

new helper: posix_acl_chmod(&acl, gfp, mode).  Replaces acl with modified
clone or with NULL if that has failed; returns 0 or -ve on error.  All
callers of posix_acl_chmod_masq() switched to that - they'd been doing
exactly the same thing.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This moves logic for checking the cached ACL values from low-level
filesystems into generic code.  The end result is a streamlined ACL
check that doesn't need to load the inode->i_op->check_acl pointer at
all for the common cached case.

The filesystems also don't need to check for a non-blocking RCU walk
case in their acl_check() functions, because that is all handled at a
VFS layer.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

casting int * to mode_t * is not a good thing - on a *lot* of big-endian
architectures mode_t happens to be smaller than int and there it breaks
quite spectaculary...

Fucked-up-by: commit cfc8dc6fSigned-off-by: NAl Viro <viro@zeniv.linux.org.uk>

We don't generate IN_DELETE_SELF on victim of overwriting rename() if
it happens to be a directory.  Trivially fixed by doing to ->i_nlink
what we do ->pino_nlink a couple of lines later in jffs2_rename().
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

No idea why these were split in the first place...
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Btrfs needs to be able to control how filemap_write_and_wait_range() is called
in fsync to make it less of a painful operation, so push down taking i_mutex and
the calling of filemap_write_and_wait() down into the ->fsync() handlers.  Some
file systems can drop taking the i_mutex altogether it seems, like ext3 and
ocfs2.  For correctness sake I just pushed everything down in all cases to make
sure that we keep the current behavior the same for everybody, and then each
individual fs maintainer can make up their mind about what to do from there.
Thanks,
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... and simplify the living hell out of callers
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

not used in the instances anymore.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This patch changes the security_inode_init_security API by adding a
filesystem specific callback to write security extended attributes.
This change is in preparation for supporting the initialization of
multiple LSM xattrs and the EVM xattr.  Initially the callback function
walks an array of xattrs, writing each xattr separately, but could be
optimized to write multiple xattrs at once.

For existing security_inode_init_security() calls, which have not yet
been converted to use the new callback function, such as those in
reiserfs and ocfs2, this patch defines security_old_inode_init_security().
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>

jffs2 does not have problems with references to unlinked directories.

CC: David Woodhouse <dwmw2@infradead.org>
CC: linux-mtd@lists.infradead.org
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Tell the filesystem if we just updated timestamp (I_DIRTY_SYNC) or
anything else, so that the filesystem can track internally if it
needs to push out a transaction for fdatasync or not.

This is just the prototype change with no user for it yet.  I plan
to push large XFS changes for the next merge window, and getting
this trivial infrastructure in this window would help a lot to avoid
tree interdependencies.

Also remove incorrect comments that ->dirty_inode can't block.  That
has been changed a long time ago, and many implementations rely on it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Only a few file systems need this.  Start by pushing it down into each
rename method (except gfs2 and xfs) so that it can be dealt with on a
per-fs basis.
Acked-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Only a few file systems need this.  Start by pushing it down into each
fs rmdir method (except gfs2 and xfs) so it can be dealt with on a per-fs
basis.

This does not change behavior for any in-tree file systems.
Acked-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Replace direct call to kmalloc for a potentially large, contiguous
buffer allocation with one to mtd_kmalloc_up_to which helps ensure the
operation can succeed under low-memory, highly- fragmented situations
albeit somewhat more slowly.
Signed-off-by: NGrant Erickson <marathon96@gmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Remove unused 'jffs2_sb_info *c' variable from 'jffs2_lookup()'
and 'jffs2_readdir()'.
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>

And give it a kernel-doc comment.

[akpm@linux-foundation.org: btrfs changed in linux-next]
Signed-off-by: NSerge E. Hallyn <serge.hallyn@canonical.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: NDavid Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Instead of always creating a huge (268K) deflate_workspace with the
maximum compression parameters (windowBits=15, memLevel=8), allow the
caller to obtain a smaller workspace by specifying smaller parameter
values.

For example, when capturing oops and panic reports to a medium with
limited capacity, such as NVRAM, compression may be the only way to
capture the whole report.  In this case, a small workspace (24K works
fine) is a win, whether you allocate the workspace when you need it (i.e.,
during an oops or panic) or at boot time.

I've verified that this patch works with all accepted values of windowBits
(positive and negative), memLevel, and compression level.
Signed-off-by: NJim Keniston <jkenisto@us.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David Miller <davem@davemloft.net>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NTracey Dent <tdent48227@gmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

SELinux would like to implement a new labeling behavior of newly created
inodes.  We currently label new inodes based on the parent and the creating
process.  This new behavior would also take into account the name of the
new object when deciding the new label.  This is not the (supposed) full path,
just the last component of the path.

This is very useful because creating /etc/shadow is different than creating
/etc/passwd but the kernel hooks are unable to differentiate these
operations.  We currently require that userspace realize it is doing some
difficult operation like that and than userspace jumps through SELinux hoops
to get things set up correctly.  This patch does not implement new
behavior, that is obviously contained in a seperate SELinux patch, but it
does pass the needed name down to the correct LSM hook.  If no such name
exists it is fine to pass NULL.
Signed-off-by: NEric Paris <eparis@redhat.com>

Signed-off-by: NNick Piggin <npiggin@kernel.dk>

RCU free the struct inode. This will allow:

- Subsequent store-free path walking patch. The inode must be consulted for
  permissions when walking, so an RCU inode reference is a must.
- sb_inode_list_lock to be moved inside i_lock because sb list walkers who want
  to take i_lock no longer need to take sb_inode_list_lock to walk the list in
  the first place. This will simplify and optimize locking.
- Could remove some nested trylock loops in dcache code
- Could potentially simplify things a bit in VM land. Do not need to take the
  page lock to follow page->mapping.

The downsides of this is the performance cost of using RCU. In a simple
creat/unlink microbenchmark, performance drops by about 10% due to inability to
reuse cache-hot slab objects. As iterations increase and RCU freeing starts
kicking over, this increases to about 20%.

In cases where inode lifetimes are longer (ie. many inodes may be allocated
during the average life span of a single inode), a lot of this cache reuse is
not applicable, so the regression caused by this patch is smaller.

The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU,
however this adds some complexity to list walking and store-free path walking,
so I prefer to implement this at a later date, if it is shown to be a win in
real situations. I haven't found a regression in any non-micro benchmark so I
doubt it will be a problem.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

It says FB instead of FS (file system).
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

do_verify_xattr_datum(), do_load_xattr_datum(), load_xattr_datum()
and verify_xattr_ref() should return negative value on error.
Sometimes they return EIO that is positive.  Change this to -EIO.
Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>