1. 14 4月, 2015 1 次提交
  2. 13 4月, 2015 3 次提交
  3. 12 4月, 2015 6 次提交
  4. 11 4月, 2015 9 次提交
  5. 10 4月, 2015 4 次提交
    • L
      nios2: fix cache coherency issue when debug with gdb · 4a89c308
      Ley Foon Tan 提交于
      Remove the end address checking for flushda function. We need to flush
      each address line for flushda instruction, from start to end address.
      This is because flushda instruction only flush the cache if tag and line
      fields are matched.
      
      Change to use ldwio instruction (bypass cache) to load the instruction
      that causing trap. Our interest is the actual instruction that executed
      by the processor, this should be uncached.
      Note, EA address might be an userspace cached address.
      Signed-off-by: NLey Foon Tan <lftan@altera.com>
      4a89c308
    • L
      Merge tag 'pm+acpi-4.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm · e5e02de0
      Linus Torvalds 提交于
      Pull power management and ACPI fixes from Rafael Wysocki:
       "These are stable-candidate fixes of some recently reported issues in
        the cpufreq core, cpuidle core, the ACPI cpuidle driver and the
        hibernate core.
      
        Specifics:
      
         - Revert a 3.17 hibernate commit that was supposed to fix an issue
           related to e820 reserved regions, but broke resume from hibernation
           on Lenovo x230 (Rafael J Wysocki).
      
         - Prevent the ACPI cpuidle driver from overwriting the name and
           description of the C0 state set by the core when the list of
           C-states changes (Thomas Schlichter).
      
         - Remove the no longer needed state_count field from struct
           cpuidle_device which prevents the list of C-states shown by the
           sysfs interface from becoming incorrect when the current number of
           them is different from the number of C-states on boot (Bartlomiej
           Zolnierkiewicz).
      
         - The cpufreq core updates the policy object of the only online CPU
           during system resume to make it reflect the current hardware state,
           but it always assumes that CPU to be CPU0 which need not be the
           case, so fix the code to avoid that assumption (Viresh Kumar)"
      
      * tag 'pm+acpi-4.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
        Revert "PM / hibernate: avoid unsafe pages in e820 reserved regions"
        cpuidle: ACPI: do not overwrite name and description of C0
        cpuidle: remove state_count field from struct cpuidle_device
        cpufreq: Schedule work for the first-online CPU on resume
      e5e02de0
    • R
      Merge branches 'pm-sleep', 'pm-cpufreq' and 'pm-cpuidle' · b2d5fb97
      Rafael J. Wysocki 提交于
      * pm-sleep:
        Revert "PM / hibernate: avoid unsafe pages in e820 reserved regions"
      
      * pm-cpufreq:
        cpufreq: Schedule work for the first-online CPU on resume
      
      * pm-cpuidle:
        cpuidle: ACPI: do not overwrite name and description of C0
        cpuidle: remove state_count field from struct cpuidle_device
      b2d5fb97
    • L
      Merge tag 'pci-v4.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci · 3cfb2f79
      Linus Torvalds 提交于
      Pull PCI fixes from Bjorn Helgaas:
       "Here are some fixes for v4.0.  I apologize for how late they are.  We
        were hoping for some better fixes, but couldn't get them polished in
        time.  These fix:
      
         - a Xen domU oops with PCI passthrough devices
         - a sparc T5 boot failure
         - a STM SPEAr13xx crash (use after initdata freed)
         - a cpcihp hotplug driver thinko
         - an AER thinko that printed stack junk
      
        Details:
      
        Enumeration
          - Don't look for ACPI hotplug parameters if ACPI is disabled (Bjorn Helgaas)
      
        Resource management
          - Revert "sparc/PCI: Clip bridge windows to fit in upstream windows" (Bjorn Helgaas)
      
        AER
          - Avoid info leak in __print_tlp_header() (Rasmus Villemoes)
      
        PCI device hotplug
          - Add missing curly braces in cpci_configure_slot() (Dan Carpenter)
      
        ST Microelectronics SPEAr13xx host bridge driver
          - Drop __initdata from spear13xx_pcie_driver (Matwey V. Kornilov)
      
      * tag 'pci-v4.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
        Revert "sparc/PCI: Clip bridge windows to fit in upstream windows"
        PCI: Don't look for ACPI hotplug parameters if ACPI is disabled
        PCI: cpcihp: Add missing curly braces in cpci_configure_slot()
        PCI/AER: Avoid info leak in __print_tlp_header()
        PCI: spear: Drop __initdata from spear13xx_pcie_driver
      3cfb2f79
  6. 09 4月, 2015 15 次提交
    • D
      ALSA: usb - Creative USB X-Fi Pro SB1095 volume knob support · 3dc8523f
      Dmitry M. Fedin 提交于
      Adds an entry for Creative USB X-Fi to the rc_config array in
      mixer_quirks.c to allow use of volume knob on the device.
      Adds support for newer X-Fi Pro card, known as "Model No. SB1095"
      with USB ID "041e:3237"
      Signed-off-by: NDmitry M. Fedin <dmitry.fedin@gmail.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      3dc8523f
    • A
      ocfs2: _really_ sync the right range · 64b4e252
      Al Viro 提交于
      "ocfs2 syncs the wrong range" had been broken; prior to it the
      code was doing the wrong thing in case of O_APPEND, all right,
      but _after_ it we were syncing the wrong range in 100% cases.
      *ppos, aka iocb->ki_pos is incremented prior to that point,
      so we are always doing sync on the area _after_ the one we'd
      written to.
      
      Spotted by Joseph Qi <joseph.qi@huawei.com> back in January;
      unfortunately, I'd missed his mail back then ;-/
      
      Cc: stable@vger.kernel.org
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      64b4e252
    • L
      nios2: add missing ptrace registers defines · e3e29f99
      Ley Foon Tan 提交于
      These are all register available in nios2.
      Signed-off-by: NLey Foon Tan <lftan@altera.com>
      e3e29f99
    • L
      Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux · 20624d17
      Linus Torvalds 提交于
      Pull drm fixes from Dave Airlie:
       "Final drm fixes: one core locking imbalance regression, and a bunch of
        i915 baytrail s/r fixes"
      
      * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
        drm: fix drm_mode_getconnector() locking imbalance regression
        drm/i915/vlv: remove wait for previous GFX clk disable request
        drm/i915/chv: Remove Wait for a previous gfx force-off
        drm/i915/vlv: save/restore the power context base reg
      20624d17
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client · 9a08da1c
      Linus Torvalds 提交于
      Pull ceph revert from Sage Weil:
       "This corrects a recent misadventure with __GFP_MEMALLOC and
        PF_MEMALLOC; it turns out it's not a good fit for RBD and we're better
        off relying on dirty page throttling"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
        Revert "libceph: use memalloc flags for net IO"
      9a08da1c
    • L
      Merge branch 'akpm' (patches from Andrew) · b97fdef8
      Linus Torvalds 提交于
      Merge misc fixes from Andrew Morton:
       "Three fixes"
      
      * emailed patches from Andrew Morton <akpm@linux-foundation.org>:
        mm: numa: disable change protection for vma(VM_HUGETLB)
        include/linux/dmapool.h: declare struct device
        mm: move zone lock to a different cache line than order-0 free page lists
      b97fdef8
    • L
      Copy the kernel module data from user space in chunks · 3afe9f84
      Linus Torvalds 提交于
      Unlike most (all?) other copies from user space, kernel module loading
      is almost unlimited in size.  So we do a potentially huge
      "copy_from_user()" when we copy the module data from user space to the
      kernel buffer, which can be a latency concern when preemption is
      disabled (or voluntary).
      
      Also, because 'copy_from_user()' clears the tail of the kernel buffer on
      failures, even a *failed* copy can end up wasting a lot of time.
      
      Normally neither of these are concerns in real life, but they do trigger
      when doing stress-testing with trinity.  Running in a VM seems to add
      its own overheadm causing trinity module load testing to even trigger
      the watchdog.
      
      The simple fix is to just chunk up the module loading, so that it never
      tries to copy insanely big areas in one go.  That bounds the latency,
      and also the amount of (unnecessarily, in this case) cleared memory for
      the failure case.
      Reported-by: NSasha Levin <sasha.levin@oracle.com>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      3afe9f84
    • L
      x86: clean up/fix 'copy_in_user()' tail zeroing · cae2a173
      Linus Torvalds 提交于
      The rule for 'copy_from_user()' is that it zeroes the remaining kernel
      buffer even when the copy fails halfway, just to make sure that we don't
      leave uninitialized kernel memory around.  Because even if we check for
      errors, some kernel buffers stay around after thge copy (think page
      cache).
      
      However, the x86-64 logic for user copies uses a copy_user_generic()
      function for all the cases, that set the "zerorest" flag for any fault
      on the source buffer.  Which meant that it didn't just try to clear the
      kernel buffer after a failure in copy_from_user(), it also tried to
      clear the destination user buffer for the "copy_in_user()" case.
      
      Not only is that pointless, it also means that the clearing code has to
      worry about the tail clearing taking page faults for the user buffer
      case.  Which is just stupid, since that case shouldn't happen in the
      first place.
      
      Get rid of the whole "zerorest" thing entirely, and instead just check
      if the destination is in kernel space or not.  And then just use
      memset() to clear the tail of the kernel buffer if necessary.
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      cae2a173
    • D
      Merge tag 'drm-intel-fixes-2015-04-08' of git://anongit.freedesktop.org/drm-intel into drm-fixes · f4274e23
      Dave Airlie 提交于
      three commits, all cc: stable, to address Baytrail
      suspend/resume issues.
      
      * tag 'drm-intel-fixes-2015-04-08' of git://anongit.freedesktop.org/drm-intel:
        drm/i915/vlv: remove wait for previous GFX clk disable request
        drm/i915/chv: Remove Wait for a previous gfx force-off
        drm/i915/vlv: save/restore the power context base reg
      f4274e23
    • A
    • A
      [regression] ocfs2: do *not* increment ->ki_pos twice · cf1b5ea1
      Al Viro 提交于
      generic_file_direct_write() already does that.  Broken by
      "ocfs2: do not fallback to buffer I/O write if appending"
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      cf1b5ea1
    • T
      ALSA: hda - Fix headphone pin config for Lifebook T731 · cc7016ab
      Takashi Iwai 提交于
      Some BIOS version of Fujitsu Lifebook T731 seems to set up the
      headphone pin (0x21) without the assoc number 0x0f while it's set only
      to the output on the docking port (0x1a).  With the recent commit
      [03ad6a8c: ALSA: hda - Fix "PCM" name being used on one DAC when
       there are two DACs], this resulted in the weird mixer element
      mapping where the headphone on the laptop is assigned as a shared
      volume with the speaker and the docking port is assigned as an
      individual headphone.
      
      This patch improves the situation by correcting the headphone pin
      config to the more appropriate value.
      Reported-and-tested-by: NTaylor Smock <smocktaylor@gmail.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      cc7016ab
    • B
      Defer processing of REQ_PREEMPT requests for blocked devices · bba0bdd7
      Bart Van Assche 提交于
      SCSI transport drivers and SCSI LLDs block a SCSI device if the
      transport layer is not operational. This means that in this state
      no requests should be processed, even if the REQ_PREEMPT flag has
      been set. This patch avoids that a rescan shortly after a cable
      pull sporadically triggers the following kernel oops:
      
      BUG: unable to handle kernel paging request at ffffc9001a6bc084
      IP: [<ffffffffa04e08f2>] mlx4_ib_post_send+0xd2/0xb30 [mlx4_ib]
      Process rescan-scsi-bus (pid: 9241, threadinfo ffff88053484a000, task ffff880534aae100)
      Call Trace:
       [<ffffffffa0718135>] srp_post_send+0x65/0x70 [ib_srp]
       [<ffffffffa071b9df>] srp_queuecommand+0x1cf/0x3e0 [ib_srp]
       [<ffffffffa0001ff1>] scsi_dispatch_cmd+0x101/0x280 [scsi_mod]
       [<ffffffffa0009ad1>] scsi_request_fn+0x411/0x4d0 [scsi_mod]
       [<ffffffff81223b37>] __blk_run_queue+0x27/0x30
       [<ffffffff8122a8d2>] blk_execute_rq_nowait+0x82/0x110
       [<ffffffff8122a9c2>] blk_execute_rq+0x62/0xf0
       [<ffffffffa000b0e8>] scsi_execute+0xe8/0x190 [scsi_mod]
       [<ffffffffa000b2f3>] scsi_execute_req+0xa3/0x130 [scsi_mod]
       [<ffffffffa000c1aa>] scsi_probe_lun+0x17a/0x450 [scsi_mod]
       [<ffffffffa000ce86>] scsi_probe_and_add_lun+0x156/0x480 [scsi_mod]
       [<ffffffffa000dc2f>] __scsi_scan_target+0xdf/0x1f0 [scsi_mod]
       [<ffffffffa000dfa3>] scsi_scan_host_selected+0x183/0x1c0 [scsi_mod]
       [<ffffffffa000edfb>] scsi_scan+0xdb/0xe0 [scsi_mod]
       [<ffffffffa000ee13>] store_scan+0x13/0x20 [scsi_mod]
       [<ffffffff811c8d9b>] sysfs_write_file+0xcb/0x160
       [<ffffffff811589de>] vfs_write+0xce/0x140
       [<ffffffff81158b53>] sys_write+0x53/0xa0
       [<ffffffff81464592>] system_call_fastpath+0x16/0x1b
       [<00007f611c9d9300>] 0x7f611c9d92ff
      Reported-by: NMax Gurtuvoy <maxg@mellanox.com>
      Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
      Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
      bba0bdd7
    • J
      be2iscsi: Fix kernel panic when device initialization fails · 2e7cee02
      John Soni Jose 提交于
      Kernel panic was happening as iscsi_host_remove() was called on
      a host which was not yet added.
      Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
      Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
      2e7cee02
    • T
      ALSA: bebob: fix to processing in big-endian machine for sending cue · a053fc31
      Takashi Sakamoto 提交于
      Some M-Audio devices require to receive bootup command just after
      powering on, while codes in BeBoB driver doesn't work properly in
      big-endian machine because the command should be aligned by
      little-endian.
      
      This commit fixes this bug. This fix should go to stable kernel.
      
      Cc: Takayuki Shiroma <t.shiroma.oki@gmail.com>
      Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      a053fc31
  7. 08 4月, 2015 2 次提交