NXP LPC32xx has three interrupt controllers, namely root Main
Interrupt Controller (MIC) and two supplementary Sub Interrupt
Controllers (SIC1 and SIC2), four interrupt outputs from SIC1 and SIC2
are connected to MIC.
Acked-by: NRob Herring <robh@kernel.org>
Acked-by: NSylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>

According to Data Manual(SPRS915P) of AM57x, TI QSPI controller on
DRA74(rev 1.1+)/DRA72 EVM can support up to 64MHz in MODE-0, whereas
MODE-3 is limited to 48MHz. Hence, switch to MODE-0 for better
throughput.
Signed-off-by: NVignesh R <vigneshr@ti.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>

Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>

Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>

Under the OX810SE, this same controller is used as "Reference Peripheral
Specification" Interrupt Controller, so add new compatible string to support
the Oxford Semiconductor OX810SE SoC Interrupt Controller.
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>

The MiQi is a rk3288-based devboard from Shenzen based mqmaker, with a
footprint the size of a credit card.

Main available outside connections are 4 usb ports, hdmi, gigabit
ethernet and two expansion headers.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Add vendor-prefix for Shenzen-based mqmaker Inc.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Acked-by: NRob Herring <robh@kernel.org>

Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>

Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Acked-by: NRob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>

Interrupt DMA11 is the shared interrupt for DMA channels 11 to 14
Interrupt DMA12 is the shared interrupt triggering for any DMA channel
(this also includes DMA channel 15)
Signed-off-by: NMartin Sperl <kernel@martin.sperl.org>
Reviewed-by: NEric Anholt <eric@anholt.net>
Acked-by: NRob Herring <robh@kernel.org>

The Renesas R-Car System Controller provides power management for the
CPU cores and various coprocessors, following the generic PM domain
bindings in Documentation/devicetree/bindings/power/power_domain.txt.

This supports R-Car Gen1 (H1), Gen2, and Gen3.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

ASPEED Technology Inc is a fabless IC-design company.  Their web site
is http://www.aspeedtech.com/.

Tyan is a manufactuer of server and workstation platforms.
Signed-off-by: NJoel Stanley <joel@jms.id.au>

Document the 'fsl,sdma-event-remap' property and provide an example of
its usage.

Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

This adds the amazon vendor prefix for Amazon.com, Inc.
Signed-off-by: NPaul Kocialkowski <contact@paulk.fr>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NTony Lindgren <tony@atomide.com>

The AM572x-IDK board is a board based on TI's AM5728 SOC
which has a dual core 1.5GHz A15 processor. This board is a
development platform for the Industrial market with:
- 2GB of DDR3L
- Dual 1Gbps Ethernet
- HDMI,
- PRU-ICSS
- uSD
- 16GB eMMC
- CAN
- RS-485
- PCIe
- USB3.0
- Video Input Port
- Industrial IO port and expansion connector

The link to the data sheet and TRM can be found here:

http://www.ti.com/product/AM5728

This patch creates a common dtsi file that will provide a common board
dtsi file to define the nodes that are common to AM57xx (including the
upcoming AM5718) IDK boards.

Initial support is only for basic peripherals
Signed-off-by: NSchuyler Patton <spatton@ti.com>
Signed-off-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

TI's Industrial Communication Engine EVM is a low cost hardware mainly
developed for industrial communication type applications using serial
or Ethernet based interfaces. This platform features TI's AM3359 with
800MHz single core Cortex-A8 processor, 256MB DDR3, 64MB SPI flash,
8MB NOR Flash, mmc, usb, can, dual Ethernet ports.

For more information, look at HW user guide[1], Data manual[2].

Just add basic support for the moment.

[1] http://processors.wiki.ti.com/index.php/AM335x_Industrial_Communication_Engine_EVM_Rev2_1_HW_User_Guide
[2] http://www.ti.com/lit/ds/symlink/am3359.pdfSigned-off-by: NLokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

DT bindings should either use a unit address and a reg property
or none of them. Since either of them aren't really useful for
such a simple device like this one remove the unit address.
Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
Acked-by: NRob Herring <robh@kernel.org>

The ARM Versatile has an optional daughterboard, if this is
mounted, we need to be able to access its system controller.
Put in a documentation blurb for this.

Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Signed-off-by: NAntony Pavlov <antonynpavlov@gmail.com>
Acked-by: NRob Herring <robh@kernel.org>
Cc: Alban Bedel <albeu@free.fr>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12869/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch adds the Device Tree source for Samsung ARTIK5 module[1]
based on Exynos3250 SoC. The ARTIK5 module includes the following
devices:
 - Application Processor (Samsung Exynos3250)
 - WiFi/BT Combo chip (Broadcom4354)
 - PMIC (Samsung S2MPS14)
 - eMMC (4GB)
 - DRAM LPDDR3 (512MB)
 - Connectors pin (60 Pins x 3 set)

Also, this patch adds the ARTIK5 evaluation board[2] dts file which includes
the ARTIK5 module[1] and have the devices such as sound codec, sd card port,
ethernet port, uart port and so on.

[1] https://www.artik.io/hardware/artik-5
[2] http://www.digikey.com/product-search/en?FV=ffecca14Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>

mfio 84 to 89 are described wrongly, fix it to describe
the right pin and add them to right pin-mux group.

The correct order is:
	pll1_lock => mips_pll	-- MFIO_83
	pll2_lock => audio_pll	-- MFIO_84
	pll3_lock => rpu_v_pll	-- MFIO_85
	pll4_lock => rpu_l_pll	-- MFIO_86
	pll5_lock => sys_pll	-- MFIO_87
	pll6_lock => wifi_pll	-- MFIO_88
	pll7_lock => bt_pll	-- MFIO_89

Cc: linux-gpio@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: James Hartley <James.Hartley@imgtec.com>
Cc: <stable@vger.kernel.org> # v4.2+
Fixes: cefc03e5("pinctrl: Add Pistachio SoC pin control driver")
Signed-off-by: NGovindraj Raja <Govindraj.Raja@imgtec.com>
Acked-by: NAndrew Bresticker <abrestic@chromium.org>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This SFR node is looked up by the I2S controller driver to tune the
SFR_I2SCLKSEL register.
Signed-off-by: NCyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Add devicetree bindings for Rockchip grf which found on
Rockchip SoCs.
Signed-off-by: NJianqun Xu <jay.xu@rock-chips.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

This adds the necessary data for handling io voltage domains on the rk3399.
As interesting tidbit, the rk3399 contains two separate iodomain areas.
One in the regular General Register Files (GRF) and one in PMUGRF in the
pmu power domain.
Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Acked-by: NKevin Hilman <khilman@baylibre.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Add device tree support to the rtc-mcp795 driver.
Signed-off-by: NEmil Bartczak <emilbart@gmail.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

Message Manager is a hardware block used to communicate with various
processor systems within certain Texas Instrument's Keystone
generation SoCs.

This hardware engine is used to transfer messages from various compute
entities(or processors) within the SoC. It is designed to be self
contained without needing software initialization for operation.
Signed-off-by: NNishanth Menon <nm@ti.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NJassi Brar <jaswinder.singh@linaro.org>

A mbigen hardware module can contain more than one device node. These device
nodes contain the same register definition.

mbigen_dev1:intc_dev1 {
	...
	reg = <0x0 0xc0080000 0x0 0x10000>;
	...
};

mbigen_dev2:intc_dev2 {
	...
	reg = <0x0 0xc0080000 0x0 0x10000>;
	...
};

In this case both devices try to request the same resource resulting in a
resource conflict.

To address this problem the devices need to be subnodes of the mbigen hardware
module, which then contains the unique register space.

[ tglx: Massaged changelog ]
Suggested-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NMa Jun <majun258@huawei.com>
Cc: jason@lakedaemon.net
Cc: marc.zyngier@arm.com
Cc: Catalin.Marinas@arm.com
Cc: guohanjun@huawei.com
Cc: Will.Deacon@arm.com
Cc: huxinwei@huawei.com
Cc: lizefan@huawei.com
Cc: dingtianhong@huawei.com
Cc: zhaojunhua@hisilicon.com
Cc: liguozhu@hisilicon.com
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20160203111602.GA1234@leverpostej
Link: http://lkml.kernel.org/r/1458203641-17172-2-git-send-email-majun258@huawei.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

eGalax_eMPIA Technology Inc (EETI) is a company specialized in
touchscreen controller solutions.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NRob Herring <robh@kernel.org>

Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Add a new pseudo-board, within the existing SH boards/machine-vectors
framework, which does not represent any actual hardware but instead
requires all hardware to be described by the device tree blob provided
by the boot loader. Changes made are thus non-invasive and do not risk
breaking support for legacy boards.

New hardware, including the open-hardware J2 and associated SoC
devices, will use device free from the outset. Legacy SH boards can
transition to device tree once all their hardware has device tree
bindings, driver support for device tree, and a dts file for the
board.

It is intented that, once all boards are supported in the new
framework, the existing machine-vectors framework should be removed
and the new device tree setup code integrated directly.
Signed-off-by: NRich Felker <dalias@libc.org>

This patch adds phys and phy-names for sdhci-of-arasan as required
properties for arasan,sdhci-5.1, and details the example as well.
Signed-off-by: NShawn Lin <shawn.lin@rock-chips.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

This patch adds the following property for arc_emac.

1) phy-reset-gpios:
The phy-reset-gpio is an optional property for arc emac device tree boot.
Change the binding document to match the driver code.

2) phy-reset-duration:
Different boards may require different phy reset duration. Add property
phy-reset-duration for device tree probe, so that the boards that need
a longer reset duration can specify it in their device tree.

Anyway, we can add the above property for arc emac.
Signed-off-by: NCaesar Wang <wxt@rock-chips.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc; Alexander Kochetkov <al.kochet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the rk3036 SoCs to match driver for document since the emac driver
has supported the rk3036 SoCs.

This patch adds the rk3036/rk3066/rk3188 SoCS to compatible for rockchip
emac ducument. Also, that will suit for other SoCs in the future.
Signed-off-by: NCaesar Wang <wxt@rock-chips.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexander Kochetkov <al.kochet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The Active-semi ACT8945A PMIC is a Multi-Function Device, it has
two subdevices:
 - Regulator
 - Charger

This patch adds documentation for ACT8945A DT bindings.
Signed-off-by: NWenyou Yang <wenyou.yang@atmel.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The TPS65086 PMIC contains several regulators and a GPO controller.
Add bindings for the TPS65086 PMIC.
Signed-off-by: NAndrew F. Davis <afd@ti.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Add a reference platform driver for PCI RC IP Protoyping Kits based on the
ARC SDP.

[bhelgaas: changelog, split patch up, MAINTAINERS update]
Signed-off-by: NJoao Pinto <jpinto@synopsys.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NPratyush Anand <pratyush.anand@gmail.com>

Add binding for generic parallel-in/serial-out shift register devices
used as GPIO.
Signed-off-by: NAndrew F. Davis <afd@ti.com>
Acked-by: NRob Herring <robh@kernel.org>
[Clarified ngpios semantic]
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Different platform may have different number of lanes
for the UFS link.
Add parameter to device tree specifying how many lanes
should be configured for the UFS link.
Reviewed-by: NHannes Reinecke <hare@suse.de>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NGilad Broner <gbroner@codeaurora.org>
Signed-off-by: NYaniv Gardi <ygardi@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>