- 10 2月, 2017 2 次提交
-
-
git://github.com/awilliam/linux-vfio由 Linus Torvalds 提交于
Pull VFIO fix from Alex Williamson: "Fix regression in attaching groups to existing container for SPAPR IOMMU backend (Alexey Kardashevskiy)" * tag 'vfio-v4.10-final' of git://github.com/awilliam/linux-vfio: vfio/spapr_tce: Set window when adding additional groups to container
-
git://git.armlinux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "A couple more fixes for 4.10: - fix addressing the short regset write issue (Dave Martin) - fix for LPAE systems which leave a pending imprecise data abort before entering the kernel (Alexander Sverdlin)" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8643/3: arm/ptrace: Preserve previous registers for short regset write ARM: 8642/1: LPAE: catch pending imprecise abort on unmask
-
- 09 2月, 2017 11 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit 020eb3da. Gabriel C reports that it causes his machine to not boot, and we haven't tracked down the reason for it yet. Since the bug it fixes has been around for a longish time, we're better off reverting the fix for now. Gabriel says: "It hangs early and freezes with a lot RCU warnings. I bisected it down to : > Ruslan Ruslichenko (1): > x86/ioapic: Restore IO-APIC irq_chip retrigger callback Reverting this one fixes the problem for me.. The box is a PRIMERGY TX200 S5 , 2 socket , 2 x E5520 CPU(s) installed" and Ruslan and Thomas are currently stumped. Reported-and-bisected-by: NGabriel C <nix.or.die@gmail.com> Cc: Ruslan Ruslichenko <rruslich@cisco.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org # for the backport of the original commit Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Daney 提交于
This reverts commit 2cc75154. With this commit in place I get on a Cavium ThunderX (arm64) system: $ if=/dev/hwrng bs=256 count=1 | od -t x1 -A x -v > rng-bad.txt 1+0 records in 1+0 records out 256 bytes (256 B) copied, 9.1171e-05 s, 2.8 MB/s $ dd if=/dev/hwrng bs=256 count=1 | od -t x1 -A x -v >> rng-bad.txt 1+0 records in 1+0 records out 256 bytes (256 B) copied, 9.6141e-05 s, 2.7 MB/s $ cat rng-bad.txt 000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000050 00 00 00 00 37 20 46 ae d0 fc 1c 55 25 6e b0 b8 000060 7c 7e d7 d4 00 0f 6f b2 91 1e 30 a8 fa 3e 52 0e 000070 06 2d 53 30 be a1 20 0f aa 56 6e 0e 44 6e f4 35 000080 b7 6a fe d2 52 70 7e 58 56 02 41 ea d1 9c 6a 6a 000090 d1 bd d8 4c da 35 45 ef 89 55 fc 59 d5 cd 57 ba 0000a0 4e 3e 02 1c 12 76 43 37 23 e1 9f 7a 9f 9e 99 24 0000b0 47 b2 de e3 79 85 f6 55 7e ad 76 13 4f a0 b5 41 0000c0 c6 92 42 01 d9 12 de 8f b4 7b 6e ae d7 24 fc 65 0000d0 4d af 0a aa 36 d9 17 8d 0e 8b 7a 3b b6 5f 96 47 0000e0 46 f7 d8 ce 0b e8 3e c6 13 a6 2c b6 d6 cc 17 26 0000f0 e3 c3 17 8e 9e 45 56 1e 41 ef 29 1a a8 65 c8 3a 000100 000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000050 00 00 00 00 f4 90 65 aa 8b f2 5e 31 01 53 b4 d4 000060 06 c0 23 a2 99 3d 01 e4 b0 c1 b1 55 0f 80 63 cf 000070 33 24 d8 3a 1d 5e cd 2c ba c0 d0 18 6f bc 97 46 000080 1e 19 51 b1 90 15 af 80 5e d1 08 0d eb b0 6c ab 000090 6a b4 fe 62 37 c5 e1 ee 93 c3 58 78 91 2a d5 23 0000a0 63 50 eb 1f 3b 84 35 18 cf b2 a4 b8 46 69 9e cf 0000b0 0c 95 af 03 51 45 a8 42 f1 64 c9 55 fc 69 76 63 0000c0 98 9d 82 fa 76 85 24 da 80 07 29 fe 4e 76 0c 61 0000d0 ff 23 94 4f c8 5c ce 0b 50 e8 31 bc 9d ce f4 ca 0000e0 be ca 28 da e6 fa cc 64 1c ec a8 41 db fe 42 bd 0000f0 a0 e2 4b 32 b4 52 ba 03 70 8e c1 8e d0 50 3a c6 000100 To my untrained mental entropy detector, the first several bytes of each read from /dev/hwrng seem to not be very random (i.e. all zero). When I revert the patch (apply this patch), I get back to what we have in v4.9, which looks like (much more random appearing): $ dd if=/dev/hwrng bs=256 count=1 | od -t x1 -A x -v > rng-good.txt 1+0 records in 1+0 records out 256 bytes (256 B) copied, 0.000252233 s, 1.0 MB/s $ dd if=/dev/hwrng bs=256 count=1 | od -t x1 -A x -v >> rng-good.txt 1+0 records in 1+0 records out 256 bytes (256 B) copied, 0.000113571 s, 2.3 MB/s $ cat rng-good.txt 000000 75 d1 2d 19 68 1f d2 26 a1 49 22 61 66 e8 09 e5 000010 e0 4e 10 d0 1a 2c 45 5d 59 04 79 8e e2 b7 2c 2e 000020 e8 ad da 34 d5 56 51 3d 58 29 c7 7a 8e ed 22 67 000030 f9 25 b9 fb c6 b7 9c 35 1f 84 21 35 c1 1d 48 34 000040 45 7c f6 f1 57 63 1a 88 38 e8 81 f0 a9 63 ad 0e 000050 be 5d 3e 74 2e 4e cb 36 c2 01 a8 14 e1 38 e1 bb 000060 23 79 09 56 77 19 ff 98 e8 44 f3 27 eb 6e 0a cb 000070 c9 36 e3 2a 96 13 07 a0 90 3f 3b bd 1d 04 1d 67 000080 be 33 14 f8 02 c2 a4 02 ab 8b 5b 74 86 17 f0 5e 000090 a1 d7 aa ef a6 21 7b 93 d1 85 86 eb 4e 8c d0 4c 0000a0 56 ac e4 45 27 44 84 9f 71 db 36 b9 f7 47 d7 b3 0000b0 f2 9c 62 41 a3 46 2b 5b e3 80 63 a4 35 b5 3c f4 0000c0 bc 1e 3a ad e4 59 4a 98 6c e8 8d ff 1b 16 f8 52 0000d0 05 5c 2f 52 2a 0f 45 5b 51 fb 93 97 a4 49 4f 06 0000e0 f3 a0 d1 1e ba 3d ed a7 60 8f bb 84 2c 21 94 2d 0000f0 b3 66 a6 61 1e 58 30 24 85 f8 c8 18 c3 77 00 22 000100 000000 73 ca cc a1 d9 bb 21 8d c3 5c f3 ab 43 6d a7 a4 000010 4a fd c5 f4 9c ba 4a 0f b1 2e 19 15 4e 84 26 e0 000020 67 c9 f2 52 4d 65 1f 81 b7 8b 6d 2b 56 7b 99 75 000030 2e cd d0 db 08 0c 4b df f3 83 c6 83 00 2e 2b b8 000040 0f af 61 1d f2 02 35 74 b5 a4 6f 28 f3 a1 09 12 000050 f2 53 b5 d2 da 45 01 e5 12 d6 46 f8 0b db ed 51 000060 7b f4 0d 54 e0 63 ea 22 e2 1d d0 d6 d0 e7 7e e0 000070 93 91 fb 87 95 43 41 28 de 3d 8b a3 a8 8f c4 9e 000080 30 95 12 7a b2 27 28 ff 37 04 2e 09 7c dd 7c 12 000090 e1 50 60 fb 6d 5f a8 65 14 40 89 e3 4c d2 87 8f 0000a0 34 76 7e 66 7a 8e 6b a3 fc cf 38 52 2e f9 26 f0 0000b0 98 63 15 06 34 99 b2 88 4f aa d8 14 88 71 f1 81 0000c0 be 51 11 2b f4 7e a0 1e 12 b2 44 2e f6 8d 84 ea 0000d0 63 82 2b 66 b3 9a fd 08 73 5a c2 cc ab 5a af b1 0000e0 88 e3 a6 80 4b fc db ed 71 e0 ae c0 0a a4 8c 35 0000f0 eb 89 f9 8a 4b 52 59 6f 09 7c 01 3f 56 e7 c7 bf 000100 Signed-off-by: NDavid Daney <david.daney@cavium.com> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge fixes from Andrew Morton: "4 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/slub.c: fix random_seq offset destruction cpumask: use nr_cpumask_bits for parsing functions mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlers kernel/ucount.c: mark user_header with kmemleak_ignore()
-
由 Sean Rees 提交于
Commit 210e7a43 ("mm: SLUB freelist randomization") broke USB hub initialisation as described in https://bugzilla.kernel.org/show_bug.cgi?id=177551. Bail out early from init_cache_random_seq if s->random_seq is already initialised. This prevents destroying the previously computed random_seq offsets later in the function. If the offsets are destroyed, then shuffle_freelist will truncate page->freelist to just the first object (orphaning the rest). Fixes: 210e7a43 ("mm: SLUB freelist randomization") Link: http://lkml.kernel.org/r/20170207140707.20824-1-sean@erifax.orgSigned-off-by: NSean Rees <sean@erifax.org> Reported-by: <userwithuid@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Thomas Garnier <thgarnie@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Commit 513e3d2d ("cpumask: always use nr_cpu_ids in formatting and parsing functions") converted both cpumask printing and parsing functions to use nr_cpu_ids instead of nr_cpumask_bits. While this was okay for the printing functions as it just picked one of the two output formats that we were alternating between depending on a kernel config, doing the same for parsing wasn't okay. nr_cpumask_bits can be either nr_cpu_ids or NR_CPUS. We can always use nr_cpu_ids but that is a variable while NR_CPUS is a constant, so it can be more efficient to use NR_CPUS when we can get away with it. Converting the printing functions to nr_cpu_ids makes sense because it affects how the masks get presented to userspace and doesn't break anything; however, using nr_cpu_ids for parsing functions can incorrectly leave the higher bits uninitialized while reading in these masks from userland. As all testing and comparison functions use nr_cpumask_bits which can be larger than nr_cpu_ids, the parsed cpumasks can erroneously yield false negative results. This made the taskstats interface incorrectly return -EINVAL even when the inputs were correct. Fix it by restoring the parse functions to use nr_cpumask_bits instead of nr_cpu_ids. Link: http://lkml.kernel.org/r/20170206182442.GB31078@htj.duckdns.org Fixes: 513e3d2d ("cpumask: always use nr_cpu_ids in formatting and parsing functions") Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NMartin Steigerwald <martin.steigerwald@teamix.de> Debugged-by: NBen Hutchings <ben.hutchings@codethink.co.uk> Cc: <stable@vger.kernel.org> [4.0+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
Some ->page_mkwrite handlers may return VM_FAULT_RETRY as its return code (GFS2 or Lustre can definitely do this). However VM_FAULT_RETRY from ->page_mkwrite is completely unhandled by the mm code and results in locking and writeably mapping the page which definitely is not what the caller wanted. Fix Lustre and block_page_mkwrite_ret() used by other filesystems (notably GFS2) to return VM_FAULT_NOPAGE instead which results in bailing out from the fault code, the CPU then retries the access, and we fault again effectively doing what the handler wanted. Link: http://lkml.kernel.org/r/20170203150729.15863-1-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz> Reported-by: NAl Viro <viro@ZenIV.linux.org.uk> Reviewed-by: NJinshan Xiong <jinshan.xiong@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Luis R. Rodriguez 提交于
The user_header gets caught by kmemleak with the following splat as missing a free: unreferenced object 0xffff99667a733d80 (size 96): comm "swapper/0", pid 1, jiffies 4294892317 (age 62191.468s) hex dump (first 32 bytes): a0 b6 92 b4 ff ff ff ff 00 00 00 00 01 00 00 00 ................ 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: kmemleak_alloc+0x4a/0xa0 __kmalloc+0x144/0x260 __register_sysctl_table+0x54/0x5e0 register_sysctl+0x1b/0x20 user_namespace_sysctl_init+0x17/0x34 do_one_initcall+0x52/0x1a0 kernel_init_freeable+0x173/0x200 kernel_init+0xe/0x100 ret_from_fork+0x2c/0x40 The BUG_ON()s are intended to crash so no need to clean up after ourselves on error there. This is also a kernel/ subsys_init() we don't need a respective exit call here as this is never modular, so just white list it. Link: http://lkml.kernel.org/r/20170203211404.31458-1-mcgrof@kernel.orgSigned-off-by: NLuis R. Rodriguez <mcgrof@kernel.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Nikolay Borisov <n.borisov.lkml@gmail.com> Cc: Serge Hallyn <serge@hallyn.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI fixes from Bjorn Helgaas: - check MSI affinity vs. number of vectors to avoid memory corruption - drop runtime power management for PCIe hotplug ports for now to avoid regressing hotplug via sysfs * tag 'pci-v4.10-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: pciehp: Add runtime PM support for PCIe hotplug ports" PCI/MSI: Don't apply affinity if there aren't enough vectors left
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Arnd Bergmann: - A relatively large patch restores booting on i.MX platforms that failed to boot after a cleanup was merged for v4.10. - A quirk for USB needs to be enabled on the STi platform - On the Meson platform, we saw memory corruption with part of the memory used by the secure monitor, so we have to stay out of that area. - The same platform also has a problem with ethernet under load, which is fixed by disabling EEE negotiation. - imx6dl has an incorrect pin configuration, which prevents SPI from working. - Two maintainers have lost their access to their email addresses, so we should update the MAINTAINERS file before the release - Renaming one of the orion5x linkstation models to help simplify the debian install. - A couple of fixes for build warnings that were introduced during v4.10-rc. * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: defconfigs: make NF_CT_PROTO_SCTP and NF_CT_PROTO_UDPLITE built-in MAINTAINERS: socfpga: update email for Dinh Nguyen ARM: orion5x: fix Makefile for linkstation-lschl.dtb ARM: dts: orion5x-lschl: More consistent naming on linkstation series ARM: dts: orion5x-lschl: Fix model name MAINTAINERS: change email address from atmel to microchip MAINTAINERS: at91: change email address ARM64: dts: meson-gx: Add firmware reserved memory zones ARM64: dts: meson-gxbb-odroidc2: fix GbE tx link breakage ARM: dts: STiH407-family: set snps,dis_u3_susphy_quirk ARM: dts: imx: Pass 'chosen' and 'memory' nodes ARM: dts: imx6dl: fix GPIO4 range ARM: imx: hide unused variable in #ifdef
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull selinux fix from James Morris: "Fix off-by-one in setprocattr" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: selinux: fix off-by-one in setprocattr
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fix from Jens Axboe: "A single fix that should go into 4.10, fixing a regression on some devices with the WRITE_SAME command" * 'for-linus' of git://git.kernel.dk/linux-block: block: don't try Write Same from __blkdev_issue_zeroout
-
- 08 2月, 2017 9 次提交
-
-
由 Stephen Smalley 提交于
SELinux tries to support setting/clearing of /proc/pid/attr attributes from the shell by ignoring terminating newlines and treating an attribute value that begins with a NUL or newline as an attempt to clear the attribute. However, the test for clearing attributes has always been wrong; it has an off-by-one error, and this could further lead to reading past the end of the allocated buffer since commit bb646cdb ("proc_pid_attr_write(): switch to memdup_user()"). Fix the off-by-one error. Even with this fix, setting and clearing /proc/pid/attr attributes from the shell is not straightforward since the interface does not support multiple write() calls (so shells that write the value and newline separately will set and then immediately clear the attribute, requiring use of echo -n to set the attribute), whereas trying to use echo -n "" to clear the attribute causes the shell to skip the write() call altogether since POSIX says that a zero-length write causes no side effects. Thus, one must use echo -n to set and echo without -n to clear, as in the following example: $ echo -n unconfined_u:object_r:user_home_t:s0 > /proc/$$/attr/fscreate $ cat /proc/$$/attr/fscreate unconfined_u:object_r:user_home_t:s0 $ echo "" > /proc/$$/attr/fscreate $ cat /proc/$$/attr/fscreate Note the use of /proc/$$ rather than /proc/self, as otherwise the cat command will read its own attribute value, not that of the shell. There are no users of this facility to my knowledge; possibly we should just get rid of it. UPDATE: Upon further investigation it appears that a local process with the process:setfscreate permission can cause a kernel panic as a result of this bug. This patch fixes CVE-2017-2618. Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov> [PM: added the update about CVE-2017-2618 to the commit description] Cc: stable@vger.kernel.org # 3.5: d6ea83ecSigned-off-by: NPaul Moore <paul@paul-moore.com> Signed-off-by: NJames Morris <james.l.morris@oracle.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Load correct firmware in rtl8192ce wireless driver, from Jurij Smakov. 2) Fix leak of tx_ring and tx_cq due to overwriting in mlx4 driver, from Martin KaFai Lau. 3) Need to reference count PHY driver module when it is attached, from Mao Wenan. 4) Don't do zero length vzalloc() in ethtool register dump, from Stanislaw Gruszka. 5) Defer net_disable_timestamp() to a workqueue to get out of locking issues, from Eric Dumazet. 6) We cannot drop the SKB dst when IP options refer to them, fix also from Eric Dumazet. 7) Incorrect packet header offset calculations in ip6_gre, again from Eric Dumazet. 8) Missing tcp_v6_restore_cb() causes use-after-free, from Eric too. 9) tcp_splice_read() can get into an infinite loop with URG, and hey it's from Eric once more. 10) vnet_hdr_sz can change asynchronously, so read it once during decision making in macvtap and tun, from Willem de Bruijn. 11) Can't use kernel stack for DMA transfers in USB networking drivers, from Ben Hutchings. 12) Handle csum errors properly in UDP by calling the proper destructor, from Eric Dumazet. 13) For non-deterministic softirq run when scheduling NAPI from a workqueue in mlx4, from Benjamin Poirier. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (28 commits) sctp: check af before verify address in sctp_addr_id2transport sctp: avoid BUG_ON on sctp_wait_for_sndbuf mlx4: Invoke softirqs after napi_reschedule udp: properly cope with csum errors catc: Use heap buffer for memory size test catc: Combine failure cleanup code in catc_probe() rtl8150: Use heap buffers for all register access pegasus: Use heap buffers for all register access macvtap: read vnet_hdr_size once tun: read vnet_hdr_sz once tcp: avoid infinite loop in tcp_splice_read() hns: avoid stack overflow with CONFIG_KASAN ipv6: Fix IPv6 packet loss in scenarios involving roaming + snooping switches ipv6: tcp: add a missing tcp_v6_restore_cb() nl80211: Fix mesh HT operation check mac80211: Fix adding of mesh vendor IEs mac80211: Allocate a sync skcipher explicitly for FILS AEAD mac80211: Fix FILS AEAD protection in Association Request frame ip6_gre: fix ip6gre_err() invalid reads netlabel: out of bound access in cipso_v4_validate() ...
-
由 Hugh Dickins 提交于
Commit 6326fec1 ("mm: Use owner_priv bit for PageSwapCache, valid when PageSwapBacked") aliased PG_swapcache to PG_owner_priv_1 (and depending on PageSwapBacked being true). As a result, the KPF_SWAPCACHE bit in '/proc/kpageflags' should now be synthesized, instead of being shown on unrelated pages which just happen to have PG_owner_priv_1 set. Signed-off-by: NHugh Dickins <hughd@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Xin Long 提交于
Commit 6f29a130 ("sctp: sctp_addr_id2transport should verify the addr before looking up assoc") invoked sctp_verify_addr to verify the addr. But it didn't check af variable beforehand, once users pass an address with family = 0 through sockopt, sctp_get_af_specific will return NULL and NULL pointer dereference will be caused by af->sockaddr_len. This patch is to fix it by returning NULL if af variable is NULL. Fixes: 6f29a130 ("sctp: sctp_addr_id2transport should verify the addr before looking up assoc") Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Kardashevskiy 提交于
If a container already has a group attached, attaching a new group should just program already created IOMMU tables to the hardware via the iommu_table_group_ops::set_window() callback. However commit 6f01cc69 ("vfio/spapr: Add a helper to create default DMA window") did not just simplify the code but also removed the set_window() calls in the case of attaching groups to a container which already has tables so it broke VFIO PCI hotplug. This reverts set_window() bits in tce_iommu_take_ownership_ddw(). Fixes: 6f01cc69 ("vfio/spapr: Add a helper to create default DMA window") Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
-
由 Vineet Gupta 提交于
Reported-by: NJo-Philipp Wich <jo@mein.io> Fixes: 9aed02fe ("ARC: [arcompact] handle unaligned access delay slot") Cc: linux-kernel@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: stable@vger.kernel.org Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Marcelo Ricardo Leitner 提交于
Alexander Popov reported that an application may trigger a BUG_ON in sctp_wait_for_sndbuf if the socket tx buffer is full, a thread is waiting on it to queue more data and meanwhile another thread peels off the association being used by the first thread. This patch replaces the BUG_ON call with a proper error handling. It will return -EPIPE to the original sendmsg call, similarly to what would have been done if the association wasn't found in the first place. Acked-by: NAlexander Popov <alex.popov@linux.com> Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Benjamin Poirier 提交于
mlx4 may schedule napi from a workqueue. Afterwards, softirqs are not run in a deterministic time frame and the following message may be logged: NOHZ: local_softirq_pending 08 The problem is the same as what was described in commit ec13ee80 ("virtio_net: invoke softirqs after __napi_schedule") and this patch applies the same fix to mlx4. Fixes: 07841f9d ("net/mlx4_en: Schedule napi when RX buffers allocation fails") Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NBenjamin Poirier <bpoirier@suse.com> Acked-by: NEric Dumazet <edumazet@google.com> Reviewed-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Dmitry reported that UDP sockets being destroyed would trigger the WARN_ON(atomic_read(&sk->sk_rmem_alloc)); in inet_sock_destruct() It turns out we do not properly destroy skb(s) that have wrong UDP checksum. Thanks again to syzkaller team. Fixes : 7c13f97f ("udp: do fwd memory scheduling on dequeue") Reported-by: NDmitry Vyukov <dvyukov@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 2月, 2017 18 次提交
-
-
由 David S. Miller 提交于
Ben Hutchings says: ==================== net: Fix on-stack USB buffers Allocating USB buffers on the stack is not portable, and no longer works on x86_64 (with VMAP_STACK enabled as per default). This series fixes all the instances I could find where USB networking drivers do that. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Allocating USB buffers on the stack is not portable, and no longer works on x86_64 (with VMAP_STACK enabled as per default). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Allocating USB buffers on the stack is not portable, and no longer works on x86_64 (with VMAP_STACK enabled as per default). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Allocating USB buffers on the stack is not portable, and no longer works on x86_64 (with VMAP_STACK enabled as per default). Fixes: 1da177e4 ("Linux-2.6.12-rc2") References: https://bugs.debian.org/852556Reported-by: NLisandro Damián Nicanor Pérez Meyer <lisandro@debian.org> Tested-by: NLisandro Damián Nicanor Pérez Meyer <lisandro@debian.org> Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Willem de Bruijn says: ==================== read vnet_hdr_sz once Tuntap devices allow concurrent use and update of field vnet_hdr_sz. Read the field once to avoid TOCTOU. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
When IFF_VNET_HDR is enabled, a virtio_net header must precede data. Data length is verified to be greater than or equal to expected header length tun->vnet_hdr_sz before copying. Macvtap functions read the value once, but unless READ_ONCE is used, the compiler may ignore this and read multiple times. Enforce a single read and locally cached value to avoid updates between test and use. Signed-off-by: NWillem de Bruijn <willemb@google.com> Suggested-by: NEric Dumazet <edumazet@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
When IFF_VNET_HDR is enabled, a virtio_net header must precede data. Data length is verified to be greater than or equal to expected header length tun->vnet_hdr_sz before copying. Read this value once and cache locally, as it can be updated between the test and use (TOCTOU). Signed-off-by: NWillem de Bruijn <willemb@google.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> CC: Eric Dumazet <edumazet@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Splicing from TCP socket is vulnerable when a packet with URG flag is received and stored into receive queue. __tcp_splice_read() returns 0, and sk_wait_data() immediately returns since there is the problematic skb in queue. This is a nice way to burn cpu (aka infinite loop) and trigger soft lockups. Again, this gem was found by syzkaller tool. Fixes: 9c55e01c ("[TCP]: Splice receive support.") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm由 Linus Torvalds 提交于
Pull libnvdimm fixes from Dan Williams: "None of these are showstoppers for 4.10 and could wait for 4.11 merge window, but they are low enough risk for this late in the cycle and the fixes have waiting users . They have received a build success notification from the 0day robot, pass the latest ndctl unit tests, and appeared in next: - Fix a crash that can result when SIGINT is sent to a process that is awaiting completion of an address range scrub command. We were not properly cleaning up the workqueue after wait_event_interruptible(). - Fix a memory hotplug failure condition that results from not reserving enough space out of persistent memory for the memmap. By default we align to 2M allocations that the memory hotplug code assumes, but if the administrator specifies a non-default 4K-alignment then we can fail to correctly size the reservation. - A one line fix to improve the predictability of libnvdimm block device names. A common operation is to reconfigure /dev/pmem0 into a different mode. For example, a reconfiguration might set a new mode that reserves some of the capacity for a struct page memmap array. It surprises users if the device name changes to "/dev/pmem0.1" after the mode change and then back to /dev/pmem0 after a reboot. - Add 'const' to some function pointer tables" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm, pfn: fix memmap reservation size versus 4K alignment acpi, nfit: fix acpi_nfit_flush_probe() crash libnvdimm, namespace: do not delete namespace-id 0 nvdimm: constify device_type structures
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management fixes from Rafael Wysocki: "These add a quirk to intel_pstate to work around a firmware setting that leads to frequency scaling issues (discovered recently) on some Intel Kaby Lake processors, fix up the recently added brcmstb-avs cpufreq driver and avoid false-positive warnings from the runtime PM framework triggered by recent changes in i915. Specifics: - Add an intel_pstate driver quirk to work around a firmware setting that leads to frequency scaling issues on desktop Intel Kaby Lake processors in some configurations if the hardware-managed P-states (HWP) feature is in use (Srinivas Pandruvada) - Fix up the recently added brcmstb-avs cpufreq driver: fix a bug related to system suspend and change the sysfs interface to match the user space expectations (Markus Mayer) - Modify the runtime PM framework to avoid false-positive warnings from the might_sleep_if() assertions in it (Rafael Wysocki)" * tag 'pm-4.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / runtime: Avoid false-positive warnings from might_sleep_if() cpufreq: intel_pstate: Disable energy efficiency optimization cpufreq: brcmstb-avs-cpufreq: properly retrieve P-state upon suspend cpufreq: brcmstb-avs-cpufreq: extend sysfs entry brcm_avs_pmap
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm由 Linus Torvalds 提交于
Pull device mapper fixes from Mike Snitzer: - a fix for a race in .request_fn request-based DM request handling vs DM device destruction - an RCU fix for dm-crypt's kernel keyring support that was included in 4.10-rc1 - a -Wbool-operation warning fix for DM multipath * tag 'dm-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm crypt: replace RCU read-side section with rwsem dm rq: cope with DM device destruction while in dm_old_request_fn() dm mpath: cleanup -Wbool-operation warning in choose_pgpath()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media fixes from Mauro Carvalho Chehab: "A few documentation fixes at CEC (with got promoted from staging for 4.10), and one fix on its core." * tag 'media/v4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] cec: fix wrong last_la determination [media] cec-intro.rst: mention the v4l-utils package and CEC utilities [media] cec rst: remove "This API is not yet finalized" notice
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fixes from Herbert Xu: - use-after-free in algif_aead - modular aesni regression when pcbc is modular but absent - bug causing IO page faults in ccp - double list add in ccp - NULL pointer dereference in qat (two patches) - panic in chcr - NULL pointer dereference in chcr - out-of-bound access in chcr * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: chcr - Fix key length for RFC4106 crypto: algif_aead - Fix kernel panic on list_del crypto: aesni - Fix failure when pcbc module is absent crypto: ccp - Fix double add when creating new DMA command crypto: ccp - Fix DMA operations when IOMMU is enabled crypto: chcr - Check device is allocated before use crypto: chcr - Fix panic on dma_unmap_sg crypto: qat - zero esram only for DH85x devices crypto: qat - fix bar discovery for c62x
-
由 Arnd Bergmann 提交于
The use of ACCESS_ONCE() looks like a micro-optimization to force gcc to use an indexed load for the register address, but it has an absolutely detrimental effect on builds with gcc-5 and CONFIG_KASAN=y, leading to a very likely kernel stack overflow aside from very complex object code: hisilicon/hns/hns_dsaf_gmac.c: In function 'hns_gmac_update_stats': hisilicon/hns/hns_dsaf_gmac.c:419:1: error: the frame size of 2912 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] hisilicon/hns/hns_dsaf_ppe.c: In function 'hns_ppe_reset_common': hisilicon/hns/hns_dsaf_ppe.c:390:1: error: the frame size of 1184 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] hisilicon/hns/hns_dsaf_ppe.c: In function 'hns_ppe_get_regs': hisilicon/hns/hns_dsaf_ppe.c:621:1: error: the frame size of 3632 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] hisilicon/hns/hns_dsaf_rcb.c: In function 'hns_rcb_get_common_regs': hisilicon/hns/hns_dsaf_rcb.c:970:1: error: the frame size of 2784 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] hisilicon/hns/hns_dsaf_gmac.c: In function 'hns_gmac_get_regs': hisilicon/hns/hns_dsaf_gmac.c:641:1: error: the frame size of 5728 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] hisilicon/hns/hns_dsaf_rcb.c: In function 'hns_rcb_get_ring_regs': hisilicon/hns/hns_dsaf_rcb.c:1021:1: error: the frame size of 2208 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_comm_init': hisilicon/hns/hns_dsaf_main.c:1209:1: error: the frame size of 1904 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] hisilicon/hns/hns_dsaf_xgmac.c: In function 'hns_xgmac_get_regs': hisilicon/hns/hns_dsaf_xgmac.c:748:1: error: the frame size of 4704 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_update_stats': hisilicon/hns/hns_dsaf_main.c:2420:1: error: the frame size of 1088 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_get_regs': hisilicon/hns/hns_dsaf_main.c:2753:1: error: the frame size of 10768 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] This does not seem to happen any more with gcc-7, but removing the ACCESS_ONCE seems safe anyway and it avoids a serious issue for some people. I have verified that with gcc-5.3.1, the object code we get is better in the new version both with and without CONFIG_KASAN, as we no longer allocate a 1344 byte stack frame for hns_dsaf_get_regs() but otherwise have practically identical object code. With gcc-7.0.0, removing ACCESS_ONCE has no effect, the object code is already good either way. This patch is probably not urgent to get into 4.11 as only KASAN=y builds with certain compilers are affected, but I still think it makes sense to backport into older kernels. Cc: stable@vger.kernel.org Fixes: 511e6bc0 ("net: add Hisilicon Network Subsystem DSAF support") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Lüssing 提交于
When for instance a mobile Linux device roams from one access point to another with both APs sharing the same broadcast domain and a multicast snooping switch in between: 1) (c) <~~~> (AP1) <--[SSW]--> (AP2) 2) (AP1) <--[SSW]--> (AP2) <~~~> (c) Then currently IPv6 multicast packets will get lost for (c) until an MLD Querier sends its next query message. The packet loss occurs because upon roaming the Linux host so far stayed silent regarding MLD and the snooping switch will therefore be unaware of the multicast topology change for a while. This patch fixes this by always resending MLD reports when an interface change happens, for instance from NO-CARRIER to CARRIER state. Signed-off-by: NLinus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
The symbols can no longer be used as loadable modules, leading to a harmless Kconfig warning: arch/arm/configs/imote2_defconfig:60:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE arch/arm/configs/imote2_defconfig:59:warning: symbol value 'm' invalid for NF_CT_PROTO_SCTP arch/arm/configs/ezx_defconfig:68:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE arch/arm/configs/ezx_defconfig:67:warning: symbol value 'm' invalid for NF_CT_PROTO_SCTP Let's make them built-in. Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Christoph Hellwig 提交于
Write Same can return an error asynchronously if it turns out the underlying SCSI device does not support Write Same, which makes a proper fallback to other methods in __blkdev_issue_zeroout impossible. Thus only issue a Write Same from blkdev_issue_zeroout an don't try it at all from __blkdev_issue_zeroout as a non-invasive workaround. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reported-by: NJunichi Nomura <j-nomura@ce.jp.nec.com> Fixes: e73c23ff ("block: add async variant of blkdev_issue_zeroout") Tested-by: NJunichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-