- 14 7月, 2016 1 次提交
-
-
由 Paul Gortmaker 提交于
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance for the presence of either and replace as needed. Build testing revealed some implicit header usage that was fixed up accordingly. Note that some bool/obj-y instances remain since module.h is the header for some exception table entry stuff, and for things like __init_or_module (code that is tossed when MODULES=n). Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160714001901.31603-4-paul.gortmaker@windriver.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 01 2月, 2016 1 次提交
-
-
由 Huaitong Han 提交于
Most of the magic numbers in x86_capability[] have been converted to 'enum cpuid_leafs', and this patch updates the remaining part. Signed-off-by: NHuaitong Han <huaitong.han@intel.com> Signed-off-by: NBorislav Petkov <bp@suse.de> Cc: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hector Marco-Gisbert <hecmargi@upv.es> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: lguest@lists.ozlabs.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1453750913-4781-3-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 24 4月, 2015 2 次提交
-
-
由 Thomas Gleixner 提交于
We have 3 identical copies of the ioapic domain ops for acpi, mpparse, and sfi. Have a global one in the io_apic code and be done with it. To avoid include hell in io_apic.h, create a private irqdomain header and include the generic irqdomain header from there. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Cohen <david.a.cohen@linux.intel.com> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: sfi-devel@simplefirmware.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh@kernel.org> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/1428978610-28986-32-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Jiang Liu 提交于
Convert IOAPIC driver to support and use hierarchical irqdomain interfaces. It's a little big, but would break bisecting if we split it into multiple patches. Fold in a patch from Andy Shevchenko <andriy.shevchenko@linux.intel.com> to make it bisectable. http://lkml.org/lkml/2014/12/10/622Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com> Tested-by: NJoerg Roedel <jroedel@suse.de> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: sfi-devel@simplefirmware.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: David Cohen <david.a.cohen@linux.intel.com> Link: http://lkml.kernel.org/r/1428905519-23704-38-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 31 7月, 2014 1 次提交
-
-
由 David Rientjes 提交于
Since commit b5660ba7 ("x86, platforms: Remove NUMAQ") removed NUMAQ, the mps_oem_check() apic callback has been obsolete. Remove it. This allows generic_mps_oem_check() to be removed as well. Signed-off-by: NDavid Rientjes <rientjes@google.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302349390.17503@chino.kir.corp.google.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 22 6月, 2014 5 次提交
-
-
由 Jiang Liu 提交于
Release IOAPIC pin associated with PCI device when the PCI device is disabled. Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1402302011-23642-40-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Jiang Liu 提交于
Refine mpparse to use common irqdomain map interface to program IOAPIC pins, so we can unify the callsite to progam IOAPIC pins. Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1402302011-23642-32-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Jiang Liu 提交于
Enhance mpparse to provide basic support of irqdomain. Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1402302011-23642-27-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Jiang Liu 提交于
Enhance function mp_register_ioapic() to support irqdomain. When registering IOAPIC, caller may provide callbacks and parameters for creating irqdomain. The IOAPIC core will create irqdomain later if caller has passed in corresponding parameters. Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: sfi-devel@simplefirmware.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Tony Lindgren <tony@atomide.com> Link: http://lkml.kernel.org/r/1402302011-23642-25-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Jiang Liu 提交于
Use pr_lvl() helper utilities to replace printk(KERN_LVL) for readability, no function changes. Also use pr_cont() to avoid multiple newlines in one printk(). Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1402302011-23642-3-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 30 5月, 2012 1 次提交
-
-
由 Bjorn Helgaas 提交于
Print physical address info in a style consistent with the %pR style used elsewhere in the kernel. For example: -found SMP MP-table at [ffff8800000fce90] fce90 +found SMP MP-table at [mem 0x000fce90-0x000fce9f] mapped at [ffff8800000fce90] -initial memory mapped : 0 - 20000000 +initial memory mapped: [mem 0x00000000-0x1fffffff] -Base memory trampoline at [ffff88000009c000] 9c000 size 8192 +Base memory trampoline [mem 0x0009c000-0x0009dfff] mapped at [ffff88000009c000] -SRAT: Node 0 PXM 0 0-80000000 +SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff] Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 5月, 2012 1 次提交
-
-
由 Paul Gortmaker 提交于
Hardware with MCA bus is limited to 386 and 486 class machines that are now 20+ years old and typically with less than 32MB of memory. A quick search on the internet, and you see that even the MCA hobbyist/enthusiast community has lost interest in the early 2000 era and never really even moved ahead from the 2.4 kernels to the 2.6 series. This deletes anything remaining related to CONFIG_MCA from core kernel code and from the x86 architecture. There is no point in carrying this any further into the future. One complication to watch for is inadvertently scooping up stuff relating to machine check, since there is overlap in the TLA name space (e.g. arch/x86/boot/mca.c). Cc: Thomas Gleixner <tglx@linutronix.de> Cc: James Bottomley <JBottomley@Parallels.com> Cc: x86@kernel.org Acked-by: NIngo Molnar <mingo@elte.hu> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 09 5月, 2012 1 次提交
-
-
由 Jarkko Sakkinen 提交于
Migrated ACPI wakeup code to the real-mode blob. Code existing in .x86_trampoline can be completely removed. Static descriptor table in wakeup_asm.S is courtesy of H. Peter Anvin. Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@intel.com> Link: http://lkml.kernel.org/r/1336501366-28617-7-git-send-email-jarkko.sakkinen@intel.com Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <len.brown@intel.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 05 12月, 2011 1 次提交
-
-
由 Bjorn Helgaas 提交于
In commit f8924e77 ("x86: unify mp_bus_info"), the 32-bit and 64-bit versions of MP_bus_info were rearranged to match each other better. Unfortunately it introduced a regression: prior to that change we used to always set the mp_bus_not_pci bit, then clear it if we found a PCI bus. After it, we set mp_bus_not_pci for ISA buses, clear it for PCI buses, and leave it alone otherwise. In the cases of ISA and PCI, there's not much difference. But ISA is not the only non-PCI bus, so it's better to always set mp_bus_not_pci and clear it only for PCI. Without this change, Dan's Dell PowerEdge 4200 panics on boot with a log indicating interrupt routing trouble unless the "noapic" option is supplied. With this change, the machine boots reliably without "noapic". Fixes http://bugs.debian.org/586494Reported-bisected-and-tested-by: NDan McGrath <troubledaemon@gmail.com> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # 2.6.26+ Cc: Dan McGrath <troubledaemon@gmail.com> Cc: Alexey Starikovskiy <aystarik@gmail.com> [jrnieder@gmail.com: clarified commit message] Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Link: http://lkml.kernel.org/r/20111122215000.GA9151@elie.hsd1.il.comcast.netSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 15 7月, 2011 2 次提交
-
-
由 Tejun Heo 提交于
Other than sanity check and debug message, the x86 specific version of memblock reserve/free functions are simple wrappers around the generic versions - memblock_reserve/free(). This patch adds debug messages with caller identification to the generic versions and replaces x86 specific ones and kills them. arch/x86/include/asm/memblock.h and arch/x86/mm/memblock.c are empty after this change and removed. Signed-off-by: NTejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1310462166-31469-14-git-send-email-tj@kernel.org Cc: Yinghai Lu <yinghai@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
early_reserve_e820() implements its own ad-hoc early allocator using memblock_x86_find_in_range_size(). Use __memblock_alloc_base() instead and remove the unnecessary @startt parameter (it's top-down allocation anyway). Signed-off-by: NTejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1310462166-31469-6-git-send-email-tj@kernel.org Cc: Yinghai Lu <yinghai@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 20 5月, 2011 1 次提交
-
-
由 Suresh Siddha 提交于
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Cc: daniel.blueman@gmail.com Link: http://lkml.kernel.org/r/20110518233157.909013179@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 04 4月, 2011 1 次提交
-
-
由 Rakib Mullick 提交于
check_slot() is only called from replace_intsrc_all() - which is in the .init section. So, put check_slot into the .init section as well, so it can be freed after system boot. Signed-off-by: NRakib Mullick <rakib.mullick@gmail.com> LKML-Reference: <AANLkTing52ntzRcHkODCWDKOfRF=0uhXw5-cCUhx6M54@mail.gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 24 3月, 2011 1 次提交
-
-
由 Rakib Mullick 提交于
'ret' isn't used by check_slot(), gets initialized but has no real use, so remove it. Signed-off-by: NRakib Mullick <rakib.mullick@gmail.com> LKML-Reference: <AANLkTikh3y+is3xixKBdyHhr_cHxzPFJF729Fcvt8+Ns@mail.gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 22 3月, 2011 1 次提交
-
-
由 Rakib Mullick 提交于
When CONFIG_X86_MPPARSE=y and CONFIG_X86_IO_APIC=n, then we get the following warning: arch/x86/kernel/mpparse.c:723: warning: 'check_slot' defined but not used So, put check_slot into CONFIG_X86_IO_APIC context. Its only called from CONFIG_X86_IO_APIC=y context. Signed-off-by: NRakib Mullick <rakib.mullick@gmail.com> LKML-Reference: <AANLkTinsUfGc=NG_GeH_B+zFVu+DXJzZbJKdQLscqfuH@mail.gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 18 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
They were generated by 'codespell' and then manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi> Cc: trivial@kernel.org LKML-Reference: <1300389856-1099-3-git-send-email-lucas.demarchi@profusion.mobi> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 10 12月, 2010 4 次提交
-
-
由 Feng Tang 提交于
assign_to_mp_irq() is copying the struct mpc_intsrc members one by one. That's silly. Use memcpy() and let the compiler figure it out. Same for the identical function assign_to_mpc_intsrc() mp_irq_mpc_intsrc_cmp() is comparing the struct members one by one, but no caller ever checks the different return codes. Use memcmp() instead. Remove the extra printk in MP_ioapic_info() Signed-off-by: NFeng Tang <feng.tang@linux.intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "Alan Cox <alan@linux.intel.com> Cc: Len Brown <len.brown@intel.com> LKML-Reference: <20101208151857.212f0018@feng-i7> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Feng Tang 提交于
There are 3 places defining similar functions of saving IRQ vector info into mp_irqs[] array: mmparse/acpi/mrst. Replace the redundant code by a common function in io_apic.c as it's only called when CONFIG_X86_IO_APIC=y Signed-off-by: NFeng Tang <feng.tang@intel.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <20101207133204.4d913c5a@feng-i7> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Yinghai Lu 提交于
It is almost the same as smp_register_lapic_addr(). We just need to let smp_read_mpc() call smp_register_lapic_addr() when early==1. Add the apic_printk to smp_register_lapic_address() Signed-off-by: NYinghai Lu <yinghai@kernel.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> LKML-Reference: <4CFDF681.3030509@kernel.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Yinghai Lu 提交于
They are the same, move the common function to apic.c to allow further cleanups. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Len Brown <lenb@kernel.org> LKML-Reference: <4CFDF675.4060305@kernel.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 28 8月, 2010 1 次提交
-
-
由 Yinghai Lu 提交于
1. replace find_e820_area with memblock_find_in_range 2. replace reserve_early with memblock_x86_reserve_range 3. replace free_early with memblock_x86_free_range. 4. NO_BOOTMEM will switch to use memblock too. 5. use _e820, _early wrap in the patch, in following patch, will replace them all 6. because memblock_x86_free_range support partial free, we can remove some special care 7. Need to make sure that memblock_find_in_range() is called after memblock_x86_fill() so adjust some calling later in setup.c::setup_arch() -- corruption_check and mptable_update -v2: Move reserve_brk() early Before fill_memblock_area, to avoid overlap between brk and memblock_find_in_range() that could happen We have more then 128 RAM entry in E820 tables, and memblock_x86_fill() could use memblock_find_in_range() to find a new place for memblock.memory.region array. and We don't need to use extend_brk() after fill_memblock_area() So move reserve_brk() early before fill_memblock_area(). -v3: Move find_smp_config early To make sure memblock_find_in_range not find wrong place, if BIOS doesn't put mptable in right place. -v4: Treat RESERVED_KERN as RAM in memblock.memory. and they are already in memblock.reserved already.. use __NOT_KEEP_MEMBLOCK to make sure memblock related code could be freed later. -v5: Generic version __memblock_find_in_range() is going from high to low, and for 32bit active_region for 32bit does include high pages need to replace the limit with memblock.default_alloc_limit, aka get_max_mapped() -v6: Use current_limit instead -v7: check with MEMBLOCK_ERROR instead of -1ULL or -1L -v8: Set memblock_can_resize early to handle EFI with more RAM entries -v9: update after kmemleak changes in mainline Suggested-by: NDavid S. Miller <davem@davemloft.net> Suggested-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Suggested-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 06 8月, 2010 1 次提交
-
-
由 Eric W. Biederman 提交于
This fixes a regression in 2.6.35 from 2.6.34, that is present for select models of Intel cpus when people are using an MP table. The commit cf7500c0 "x86, ioapic: In mpparse use mp_register_ioapic" started calling mp_register_ioapic from MP_ioapic_info. An extremely simple change that was obviously correct. Unfortunately mp_register_ioapic did just a little more than the previous hand crafted code and so we gained this call path. The problem call path is: MP_ioapic_info() mp_register_ioapic() io_apic_unique_id() io_apic_get_unique_id() get_physical_broadcast() modern_apic() lapic_get_version() apic_read(APIC_LVR) Which turned out to be a problem because the local apic was not mapped, at that point, unlike the similar point in the ACPI parsing code. This problem is fixed by mapping the local apic when parsing the mptable as soon as we reasonably can. Looking at the number of places we setup the fixmap for the local apic, I see some serious simplification opportunities. For the moment except for not duplicating the setting up of the fixmap in init_apic_mappings, I have not acted on them. The regression from 2.6.34 is tracked in bug https://bugzilla.kernel.org/show_bug.cgi?id=16173 Cc: <stable@kernel.org> 2.6.35 Reported-by: NDavid Hill <hilld@binarystorm.net> Reported-by: NTvrtko Ursulin <tvrtko.ursulin@sophos.com> Tested-by: NTvrtko Ursulin <tvrtko.ursulin@sophos.com> Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> LKML-Reference: <m1eiee86jg.fsf_-_@fess.ebiederm.org> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 10 6月, 2010 1 次提交
-
-
由 Eric W. Biederman 提交于
When I introduced the global variable gsi_end I thought gsi_end on io_apics was one past the end of the gsi range for the io_apic. After it was pointed out the the range on io_apics was inclusive I changed my global variable to match. That was a big mistake. Inclusive semantics without a range start cannot describe the case when no gsi's are allocated. Describing the case where no gsi's are allocated is important in sfi.c and mpparse.c so that we can assign gsi numbers instead of blindly copying the gsi assignments the BIOS has done as we do in the acpi case. To keep from getting the global variable confused with the gsi range end rename it gsi_top. To allow describing the case where no gsi's are allocated have gsi_top be one place the highest gsi number seen in the system. This fixes an off by one bug in sfi.c: Reported-by: Njacob pan <jacob.jun.pan@linux.intel.com> This fixes the same off by one bug in mpparse.c: This fixes an off unreachable by one bug in acpi/boot.c:irq_to_gsi Reported-by: NYinghai <yinghai.lu@oracle.com> Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> LKML-Reference: <m17hm9jre7.fsf_-_@fess.ebiederm.org> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 05 5月, 2010 1 次提交
-
-
由 Eric W. Biederman 提交于
Long ago MP_ioapic_info was the primary way of setting up our ioapic data structures and mp_register_ioapic was a compatibility shim for acpi code. Now the situation is reversed and and mp_register_ioapic is the primary way of setting up our ioapic data structures. Keep the setting up of ioapic data structures uniform by having mp_register_ioapic call mp_register_ioapic. This changes a few fields: - type: is now hardset to MP_IOAPIC but type had to bey MP_IOAPIC or MP_ioapic_info would not have been called. - flags: is now hard coded to MPC_APIC_USABLE. We require flags to contain at least MPC_APIC_USEBLE in MP_ioapic_info and we don't ever examine flags so dropping a few flags that might possibly exist that we have never used is harmless. - apicaddr: Unchanged - apicver: Read from the ioapic instead of using the cached hardware value in the MP table. The real hardware value will be more accurate. - apicid: Now verified to be unique and changed if it is not. If the BIOS got this right this is a noop. If the BIOS did not fixing things appears to be the better solution. This adds gsi_base and gsi_end values to our ioapics defined with the mpatable, which will make our lives simpler later since we can always assume gsi_base and gsi_end are valid. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> LKML-Reference: <1269936436-7039-10-git-send-email-ebiederm@xmission.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 02 4月, 2010 1 次提交
-
-
由 Andi Kleen 提交于
We found a system where the MP table MPC and MPF structures overlap. That doesn't really matter because the mptable is not used anyways with ACPI, but it leads to a panic in the early allocator due to the overlapping reservations in 2.6.33. Earlier kernels handled this without problems. Simply change these reservations to reserve_early_overlap_ok to avoid the panic. Reported-by: NThomas Renninger <trenn@suse.de> Tested-by: NThomas Renninger <trenn@suse.de> Signed-off-by: NAndi Kleen <ak@linux.intel.com> LKML-Reference: <20100329074111.GA22821@basil.fritz.box> Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: <stable@kernel.org>
-
- 10 2月, 2010 1 次提交
-
-
由 Suresh Siddha 提交于
We need to fall back from logical-flat APIC mode to physical-flat mode when we have more than 8 CPUs. However, in the presence of CPU hotplug(with bios listing not enabled but possible cpus as disabled cpus in MADT), we have to consider the number of possible CPUs rather than the number of current CPUs; otherwise we may cross the 8-CPU boundary when CPUs are added later. 32bit apic code can use more cleanups (like the removal of vendor checks in 32bit default_setup_apic_routing()) and more unifications with 64bit code. Yinghai has some patches in works already. This patch addresses the boot issue that is reported in the virtualization guest context. [ hpa: incorporated function annotation feedback from Yinghai Lu ] Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <1265767304.2833.19.camel@sbs-t61.sc.intel.com> Acked-by: NShaohui Zheng <shaohui.zheng@intel.com> Reviewed-by: NYinghai Lu <yinghai@kernel.org> Cc: <stable@kernel.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 11 12月, 2009 1 次提交
-
-
由 Yinghai Lu 提交于
Jens found the following crash/regression: [ 0.000000] found SMP MP-table at [ffff8800000fdd80] fdd80 [ 0.000000] Kernel panic - not syncing: Overlapping early reservations 12-f011 MP-table mpc to 0-fff BIOS data page and [ 0.000000] Kernel panic - not syncing: Overlapping early reservations 12-f011 MP-table mpc to 6000-7fff TRAMPOLINE and bisected it to b24c2a92 ("x86: Move find_smp_config() earlier and avoid bootmem usage"). It turns out the BIOS is using the first 64k for mptable, without reserving it. So try to find good range for the real-mode trampoline instead of hard coding it, in case some bios tries to use that range for sth. Reported-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NYinghai Lu <yinghai@kernel.org> Tested-by: NJens Axboe <jens.axboe@oracle.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> LKML-Reference: <4B21630A.6000308@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 24 11月, 2009 1 次提交
-
-
由 Yinghai Lu 提交于
Move the find_smp_config() call to before bootmem is initialized. Use reserve_early() instead of reserve_bootmem() in it. This simplifies the code, we only need to call find_smp_config() once and can remove the now unneeded reserve parameter from x86_init_mpparse::find_smp_config. We thus also reduce x86's dependency on bootmem allocations. Signed-off-by: NYinghai Lu <yinghai@kernel.org> LKML-Reference: <4B0BB9F2.70907@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 31 8月, 2009 1 次提交
-
-
由 Thomas Gleixner 提交于
Replace the quirk machinery by a x86_init_ops function which defaults to the standard implementation. Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 27 8月, 2009 5 次提交
-
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
Move smp_read_mpc_oem from quirks to x86_init. Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
The mpc_apic_id setup is handled by a x86_quirk. Make it a x86_init_ops function with a default implementation. Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
The x86 quirkification introduced an extra ugly hackery with a variable pointer in the mpparse code. If the pointer is initialized then it is dereferenced and the variable set to 0 or incremented. Create a x86_init_ops function and let the affected numaq code hold the function. Default init is a setup noop. Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 26 8月, 2009 1 次提交
-
-
由 Cyrill Gorcunov 提交于
We already have APIC_DEFAULT_PHYS_BASE so just to be consistent. Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org> LKML-Reference: <20090824175550.927946757@openvz.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-