There are no in-tree users, so remove them.
Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add the name set by set_irq_chip_and_handler_name() to the output of
/proc/interrupts, like so:

db1200 ~ # cat /proc/interrupts
           CPU0
  8:         52     Alchemy-IC0-hilevel   serial
 10:        171     Alchemy-IC0-hilevel   au1xxx-mmc
 11:         47     Alchemy-IC0-hilevel   Au1xxx dbdma
 18:          1     Alchemy-IC0-hilevel   au1550-spi
 29:    1250997     Alchemy-IC0-riseedge  timer
 37:        211     Alchemy-IC0-hilevel   ehci_hcd:usb1, ohci_hcd:usb2
 38:          0     Alchemy-IC0-hilevel   lcd
 72:       2623     DB1200 CPLD-level     ide0
 73:        257     DB1200 CPLD-level     eth0
 84:          1     DB1200 CPLD-level     sd_insert
 85:          0     DB1200 CPLD-level     sd_eject

ERR:          0
Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Tested on Db1200.
Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch attempts to modernize core Alchemy interrupt handling code.

- add irq_chips for irq controllers instead of irq type,
- add a set_type() hook to change irq trigger type during runtime,
- add a set_wake() hook to control GPIO0..7 based wakeup,
- use linux' IRQF_TRIGGER_ constants instead of homebrew ones,
- enable GENERIC_HARDIRQS_NO__DO_IRQ.
- simplify plat_irq_dispatch
- merge au1xxx_irqmap into irq.c file, the only place where its
  contents are referenced.
- board_init_irq() is now mandatory for every board; use it to register
  the remaining (gpio-based) interrupt sources; update all boards
  accordingly.

Run-tested on Db1200 and other Au1200 based platforms.
Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 delete mode 100644 arch/mips/alchemy/common/au1xxx_irqmap.c

Not every alchemy-based board might want these options forced on it,
and most of this stuff seems to be intended for devboard code anyway.
Remove commandline mangling code out of common chip code and instead
add relevant sections to all in-tree boards to not change existing
behaviour.
Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Share some code and merge small files:
- Extract the prom init code from all devboard files (they only differ in
  memory configuration).
- Merge the irq configuration into board setup code.
- Merge smaller files into board setup code.
Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 delete mode 100644 arch/mips/alchemy/devboards/db1x00/init.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1000/init.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1000/irqmap.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1100/init.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1100/irqmap.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1200/init.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1500/init.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1500/irqmap.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1550/init.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1550/irqmap.c
 create mode 100644 arch/mips/alchemy/devboards/prom.c

This should ease sharing of common devboard code.
Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NTomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NTomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

We add a dev parameter to plat_unmap_dma_mem(), and hooks for
plat_dma_supported() and plat_extra_sync_for_device() which should be
nop changes for all existing targets.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Expand the case statement for build_tlb_write_entry so that it does
the right thing on Cavium CPU variants.
Signed-off-by: NTomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: NPaul Gortmaker <Paul.Gortmaker@windriver.com>
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

For Cavium OCTEON, compute the return epc value for OCTEON specific
branch instructions.
Signed-off-by: NTomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

For OCTEON, implement a save and restore of the multiplier state
across context switches.
Signed-off-by: NTomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NTomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: NPaul Gortmaker <Paul.Gortmaker@windriver.com>
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NTomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add in the cop2 and cvmseg state info to the known proc reg
data for Cavium so that it can be tracked, saved, restored.
Signed-off-by: NTomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NTomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Take all the OCTEON specific files that were added, and hook them into
the build system for the arch/mips.  For versions of GCC that lack
OCTEON support, override gas target architecture.
Signed-off-by: NTomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Follow precedent of other boards, and hook-up the CPU specific cache
init.
Signed-off-by: NTomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add OCTEON constants to asm/cpu.h and asm/module.h.

Add probe function for Cavium OCTEON CPUs and hook it up.
Signed-off-by: NTomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Gas from binutils 2.19 fails to compile some cop1 instructions with
-march=octeon.  Since the cop1 instructions are present in mips1, use
that arch instead.  This will be fixed in binutils 2.20.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

If on Cavium, be aware of cop2 and hwrena during do_cpu().
Signed-off-by: NTomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: NPaul Gortmaker <Paul.Gortmaker@windriver.com>
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

For Cavium CPU, we treat the same as R10000, in that all hazards
are dealt with in hardware.
Signed-off-by: NTomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: NPaul Gortmaker <Paul.Gortmaker@windriver.com>
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

These are the rest of the new files needed to add OCTEON processor
support to the Linux kernel.  Other than Makefile and Kconfig which
should be obvious, we have:

csrc-octeon.c   -- Clock source driver for OCTEON.
dma-octeon.c    -- Helper functions for mapping DMA memory.
flash_setup.c   -- Register on-board flash with the MTD subsystem.
octeon-irq.c    -- OCTEON interrupt controller managment.
octeon-memcpy.S -- Optimized memcpy() implementation.
serial.c        -- Register 8250 platform driver and early console.
setup.c         -- Early architecture initialization.
smp.c           -- OCTEON SMP support.
octeon_switch.S -- Scheduler context switch for OCTEON.
c-octeon.c      -- OCTEON cache controller support.
cex-oct.S       -- OCTEON cache exception handler.

asm/mach-cavium-octeon/*.h -- Architecture include files.
Signed-off-by: NTomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/cavium-octeon/Kconfig
 create mode 100644 arch/mips/cavium-octeon/Makefile
 create mode 100644 arch/mips/cavium-octeon/csrc-octeon.c
 create mode 100644 arch/mips/cavium-octeon/dma-octeon.c
 create mode 100644 arch/mips/cavium-octeon/flash_setup.c
 create mode 100644 arch/mips/cavium-octeon/octeon-irq.c
 create mode 100644 arch/mips/cavium-octeon/octeon-memcpy.S
 create mode 100644 arch/mips/cavium-octeon/serial.c
 create mode 100644 arch/mips/cavium-octeon/setup.c
 create mode 100644 arch/mips/cavium-octeon/smp.c
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/irq.h
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/war.h
 create mode 100644 arch/mips/include/asm/octeon/octeon.h
 create mode 100644 arch/mips/kernel/octeon_switch.S
 create mode 100644 arch/mips/mm/c-octeon.c
 create mode 100644 arch/mips/mm/cex-oct.S

MIPS: Add Cavium OCTEON processor support files to arch/mips/cavium-octeon/executive and asm/octeon.

These files are used to coordinate resource sharing between all of
the programs running on the OCTEON SOC.  The OCTEON processor has many
CPU cores (current parts have up to 16, but more are possible).  It
also has a variety of on-chip hardware blocks for things like network
acceleration, encryption and RAID.

One typical configuration is to run Linux on several of the CPU cores,
and other dedicated applications on the other cores.

Resource allocation between the various programs running on the system
(Linux kernel and other dedicated applications) needs to be
coordinated.  The code we use to do this we call the 'executive'.  All
of this resource allocation and sharing code is gathered together in
the executive directory.

Included in the patch set are the following files:

cvmx-bootmem.c and cvmx-sysinfo.c -- Coordinate memory allocation.
All memory used by the Linux kernel is obtained here at boot time.

cvmx-l2c.c -- Coordinates operations on the shared level 2 cache.

octeon-model.c  -- Probes chip capabilities and version.

The corresponding headers are in asm/octeon.
Signed-off-by: NTomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/cavium-octeon/executive/Makefile
 create mode 100644 arch/mips/cavium-octeon/executive/cvmx-bootmem.c
 create mode 100644 arch/mips/cavium-octeon/executive/cvmx-l2c.c
 create mode 100644 arch/mips/cavium-octeon/executive/cvmx-sysinfo.c
 create mode 100644 arch/mips/cavium-octeon/executive/octeon-model.c
 create mode 100644 arch/mips/include/asm/octeon/cvmx-asm.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-bootinfo.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-bootmem.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-l2c.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-packet.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-spinlock.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-sysinfo.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx.h
 create mode 100644 arch/mips/include/asm/octeon/octeon-feature.h
 create mode 100644 arch/mips/include/asm/octeon/octeon-model.h

Here we define the addresses and bit-fields of the Configuration and
Status Registers (CSRs) for some of the hardware functional units on
the OCTEON SOC.

Definitions are needed for:

CIU  -- Central Interrupt Unit.
GPIO -- General Purpose Input Output.
IOB  -- Input / Output {Busing,Bridge}.
IPD  -- Input Packet Data unit.
L2C  -- Level-2 Cache controller.
L2D  -- Level-2 Data cache.
L2T  -- Level-2 cache Tag.
LED  -- Light Emitting Diode controller.
MIO  -- Miscellaneous Input / Output.
POW  -- Packet Order / Work unit.
Signed-off-by: NTomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Since memsize is unsigned, it would seem better to use strict_strtoul that
strict_strtol.

A simplified version of the semantic patch that makes this change is as
follows: (http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@s2@
long e;
position p;
@@

strict_strtol@p(...,&e)

@@
position p != s2.p;
type T;
T e;
@@

- strict_strtol@p
+ strict_strtoul
  (...,&e)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NAnirban Sinha <asinha@zeugmasystems.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

It is useful for diagnosing boot performance to see where async function
calls are waiting on serialization...  this patch adds this
functionality to the bootgraph.pl script.

The waiting time is shown as a half transparent, gray bar through the
block that is waiting.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In a discussio with Jeff Garzik, he mentioned that the serialization
for the libata port probes only needs to be within the domain of a host.
This means that for the first port of each host (with ID 0), we don't
need to wait, so we can relax our serialization a little.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds a per host flag that allows drivers to opt in into
having its busses scanned in parallel.

Drivers that do not set this flag get their ports scanned in
the "original" sequence.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (36 commits)
  x86: fix section mismatch warnings in mcheck/mce_amd_64.c
  x86: offer frame pointers in all build modes
  x86: remove duplicated #include's
  x86: k8 numa register active regions later
  x86: update Alan Cox's email addresses
  x86: rename all fields of mpc_table mpc_X to X
  x86: rename all fields of mpc_oemtable oem_X to X
  x86: rename all fields of mpc_bus mpc_X to X
  x86: rename all fields of mpc_cpu mpc_X to X
  x86: rename all fields of mpc_intsrc mpc_X to X
  x86: rename all fields of mpc_lintsrc mpc_X to X
  x86: rename all fields of mpc_iopic mpc_X to X
  x86: irqinit_64.c init_ISA_irqs should be static
  Documentation/x86/boot.txt: payload length was changed to payload_length
  x86: setup_percpu.c fix style problems
  x86: irqinit_64.c fix style problems
  x86: irqinit_32.c fix style problems
  x86: i8259.c fix style problems
  x86: irq_32.c fix style problems
  x86: ioport.c fix style problems
  ...

Merge branch 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  [IA64] fix typo in cpumask_of_pcibus()
  x86: fix x86_32 builds for summit and es7000 arch's
  cpumask: use work_on_cpu in acpi-cpufreq.c for read_measured_perf_ctrs
  cpumask: use work_on_cpu in acpi-cpufreq.c for drv_read and drv_write
  cpumask: use cpumask_var_t in acpi-cpufreq.c
  cpumask: use work_on_cpu in acpi/cstate.c
  cpumask: convert struct cpufreq_policy to cpumask_var_t
  cpumask: replace CPUMASK_ALLOC etc with cpumask_var_t
  x86: cleanup remaining cpumask_t ops in smpboot code
  cpumask: update pci_bus_show_cpuaffinity to use new cpumask API
  cpumask: update local_cpus_show to use new cpumask API
  ia64: cpumask fix for is_affinity_mask_valid()

Commit c4be0c1d added the ability for
write_super_lockfs to return errors, and renamed them to match.  But
btrfs didn't get converted.

Do the minimal conversion to make it compile again.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The 'rb_first()', 'rb_last()', 'rb_next()' and 'rb_prev()' calls
take a pointer to an RB node or RB root. They do not change the
pointed objects, so add a 'const' qualifier in order to make life
of the users of these functions easier.

Indeed, if I have my own constant pointer &const struct my_type *p,
and I call 'rb_next(&p->rb)', I get a GCC warning:

warning: passing argument 1 of ‘rb_next’ discards qualifiers from pointer target type
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The sensor can be accessed via various buses.  In particular, SPI, I²C
and, on HP laptops, via a specific ACPI API (the only one currently
supported).  Separate this latest platform from the core of the sensor
driver to allow support for the other bus type.  The second, and more
direct goal is actually to be able to merge this part with the
hp-disk-leds driver, which has the same ACPI PNP number.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It removes XFS specific ioctl interfaces and request codes
for freeze feature.

This patch has been supplied by David Chinner.
Signed-off-by: NDave Chinner <dgc@sgi.com>
Signed-off-by: NTakashi Sato <t-sato@yk.jp.nec.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: <xfs-masters@oss.sgi.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The ioctls for the generic freeze feature are below.
o Freeze the filesystem
  int ioctl(int fd, int FIFREEZE, arg)
    fd: The file descriptor of the mountpoint
    FIFREEZE: request code for the freeze
    arg: Ignored
    Return value: 0 if the operation succeeds. Otherwise, -1

o Unfreeze the filesystem
  int ioctl(int fd, int FITHAW, arg)
    fd: The file descriptor of the mountpoint
    FITHAW: request code for unfreeze
    arg: Ignored
    Return value: 0 if the operation succeeds. Otherwise, -1
    Error number: If the filesystem has already been unfrozen,
                  errno is set to EINVAL.

[akpm@linux-foundation.org: fix CONFIG_BLOCK=n]
Signed-off-by: NTakashi Sato <t-sato@yk.jp.nec.com>
Signed-off-by: NMasayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com>
Cc: <xfs-masters@oss.sgi.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>