commit e5723f95d6b493dd437f1199cacb41459713b32f upstream.

In case of CQHCI, mrq->cmd may be NULL for data requests (non DCMD).
In such case mmc_should_fail_request is directly dereferencing
mrq->cmd while cmd is NULL.
Fix this by checking for mrq->cmd pointer.

Fixes: 72a5af55 ("mmc: core: Add support for handling CQE requests")
Signed-off-by: NRitesh Harjani <riteshh@codeaurora.org>
Cc: stable@vger.kernel.org
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5603731a15ef9ca317c122cc8c959f1dee1798b4 upstream.

In R-Car Gen2 or later, the maximum number of transfer blocks are
changed from 0xFFFF to 0xFFFFFFFF. Therefore, Block Count Register
should use iowrite32().

If another system (U-boot, Hypervisor OS, etc) uses bit[31:16], this
value will not be cleared. So, SD/MMC card initialization fails.

So, check for the bigger register and use apropriate write. Also, mark
the register as extended on Gen2.
Signed-off-by: NTakeshi Saito <takeshi.saito.xv@renesas.com>
[wsa: use max_blk_count in if(), add Gen2, update commit message]
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Cc: stable@kernel.org
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
[Ulf: Fixed build error]
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5c27ff5db1491a947264d6d4e4cbe43ae6535bae upstream.

I have encountered an interrupt storm during the eMMC chip probing (and
the chip finally didn't get detected).  It turned out that U-Boot left
the DMAC interrupts enabled while the Linux driver  didn't use those.
The SDHI driver's interrupt handler somehow assumes that, even if an
SDIO interrupt didn't happen, it should return IRQ_HANDLED.  I think
that if none of the enabled interrupts happened and got handled, we
should return IRQ_NONE -- that way the kernel IRQ code recoginizes
a spurious interrupt and masks it off pretty quickly...

Fixes: 7729c7a2 ("mmc: tmio: Provide separate interrupt handlers")
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Cc: stable@vger.kernel.org
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c9bd505dbd9d3dc80c496f88eafe70affdcf1ba6 upstream.

When using the mmc_spi driver with a card-detect pin, I noticed that the
card was not detected immediately after probe, but only after it was
unplugged and plugged back in (and the CD IRQ fired).

The call tree looks something like this:

mmc_spi_probe
  mmc_add_host
    mmc_start_host
      _mmc_detect_change
        mmc_schedule_delayed_work(&host->detect, 0)
          mmc_rescan
            host->bus_ops->detect(host)
              mmc_detect
                _mmc_detect_card_removed
                  host->ops->get_cd(host)
                    mmc_gpio_get_cd -> -ENOSYS (ctx->cd_gpio not set)
  mmc_gpiod_request_cd
    ctx->cd_gpio = desc

To fix this issue, call mmc_detect_change after the card-detect GPIO/IRQ
is registered.
Signed-off-by: NJonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 94a980c39c8e3f8abaff5d3b5bbcd4ccf1c02c4f ]

Fix a call to userspace_mem_region_find to conform to its spec of
taking an inclusive, inclusive range. It was previously being called
with an inclusive, exclusive range. Also remove a redundant region bounds
check in vm_userspace_mem_region_add. Region overlap checking is already
performed by the call to userspace_mem_region_find.

Tested: Compiled tools/testing/selftests/kvm with -static
	Ran all resulting test binaries on an Intel Haswell test machine
	All tests passed
Signed-off-by: NBen Gardon <bgardon@google.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 619ad846fc3452adaf71ca246c5aa711e2055398 ]

kvm-unit-tests' eventinj "NMI failing on IDT" test results in NMI being
delivered to the host (L1) when it's running nested. The problem seems to
be: svm_complete_interrupts() raises 'nmi_injected' flag but later we
decide to reflect EXIT_NPF to L1. The flag remains pending and we do NMI
injection upon entry so it got delivered to L1 instead of L2.

It seems that VMX code solves the same issue in prepare_vmcs12(), this was
introduced with code refactoring in commit 5f3d5799 ("KVM: nVMX: Rework
event injection and recovery").
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit bb218fbcfaaa3b115d4cd7a43c0ca164f3a96e57 ]

In case of incomplete IPI with invalid interrupt type, the current
SVM driver does not properly emulate the IPI, and fails to boot
FreeBSD guests with multiple vcpus when enabling AVIC.

Fix this by update APIC ICR high/low registers, which also
emulate sending the IPI.
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 93183bdbe73bbdd03e9566c8dc37c9d06b0d0db6 ]

Recently, DMG frequency bands have been extended till 71GHz, so extend
the range check till 20GHz (45-71GHZ), else some channels will be marked
as disabled.
Signed-off-by: NChaitanya Tata <Chaitanya.Tata@bluwireless.co.uk>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7c53eb5d87bc21464da4268c3c0c47457b6d9c9b ]

During refactor in commit 9e478066 ("mac80211: fix MU-MIMO
follow-MAC mode") a new struct 'action' was declared with packed
attribute as:

  struct {
          struct ieee80211_hdr_3addr hdr;
          u8 category;
          u8 action_code;
  } __packed action;

But since struct 'ieee80211_hdr_3addr' is declared with an aligned
keyword as:

  struct ieee80211_hdr {
  	__le16 frame_control;
  	__le16 duration_id;
  	u8 addr1[ETH_ALEN];
  	u8 addr2[ETH_ALEN];
  	u8 addr3[ETH_ALEN];
  	__le16 seq_ctrl;
  	u8 addr4[ETH_ALEN];
  } __packed __aligned(2);

Solve the ambiguity of placing aligned structure in a packed one by
adding the aligned(2) attribute to struct 'action'.

This removes the following warning (W=1):

  net/mac80211/rx.c:234:2: warning: alignment 1 of 'struct <anonymous>' is less than 2 [-Wpacked-not-aligned]

Cc: Johannes Berg <johannes.berg@intel.com>
Suggested-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NMathieu Malaterre <malat@debian.org>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7ed5285396c257fd4070b1e29e7b2341aae2a1ce ]

Following call trace is observed while adding TDLS peer entry in driver
during TDLS setup.

Call Trace:
[<c1301476>] dump_stack+0x47/0x61
[<c10537d2>] __warn+0xe2/0x100
[<fa22415f>] ? sta_apply_parameters+0x49f/0x550 [mac80211]
[<c1053895>] warn_slowpath_null+0x25/0x30
[<fa22415f>] sta_apply_parameters+0x49f/0x550 [mac80211]
[<fa20ad42>] ? sta_info_alloc+0x1c2/0x450 [mac80211]
[<fa224623>] ieee80211_add_station+0xe3/0x160 [mac80211]
[<c1876fe3>] nl80211_new_station+0x273/0x420
[<c170f6d9>] genl_rcv_msg+0x219/0x3c0
[<c170f4c0>] ? genl_rcv+0x30/0x30
[<c170ee7e>] netlink_rcv_skb+0x8e/0xb0
[<c170f4ac>] genl_rcv+0x1c/0x30
[<c170e8aa>] netlink_unicast+0x13a/0x1d0
[<c170ec18>] netlink_sendmsg+0x2d8/0x390
[<c16c5acd>] sock_sendmsg+0x2d/0x40
[<c16c6369>] ___sys_sendmsg+0x1d9/0x1e0

Fixing this by allowing TDLS setup request only when we have completed
association.
Signed-off-by: NBalaji Pothunoori <bpothuno@codeaurora.org>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e95d22c69b2c130ccce257b84daf283fd82d611e ]

The IBM virtual ethernet driver's polling function continues
to process frames after rescheduling NAPI, resulting in a warning
if it exhausted its budget. Do not restart polling after calling
napi_reschedule. Instead let frames be processed in the following
instance.
Signed-off-by: NThomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3b707c3008cad04604c1f50e39f456621821c414 ]

__bpf_redirect() and act_mirred checks this boolean
to determine whether to prefix an ethernet header.
Signed-off-by: NMaciej Żenczykowski <maze@google.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6eea3527e68acc22483f4763c8682f223eb90029 ]

The ax88772_bind() should return error code immediately when the PHY
was not reset properly through ax88772a_hw_reset().
Otherwise, The asix_get_phyid() will block when get the PHY
Identifier from the PHYSID1 MII registers through asix_mdio_read()
due to the PHY isn't ready. Furthermore, it will produce a lot of
error message cause system crash.As follows:
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
 reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to send
 software reset: ffffffb9
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
 reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable
 software MII access
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read
 reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
 reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable
 software MII access
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read
 reg index 0x0000: -71
...
Signed-off-by: NZhang Run <zhang.run@zte.com.cn>
Reviewed-by: NYang Wei <yang.wei9@zte.com.cn>
Tested-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a3c5e2cd79753121f49a8662c1e0a60ddb5486ca ]

The bindings for Qualcomm opp levels changed after being Acked but
before landing.  Thus the code in the GPU driver that was relying on
the old bindings is now broken.

Let's change the code to match the new bindings by adjusting the old
string 'qcom,level' to the new string 'opp-level'.  See the patch
("dt-bindings: opp: Introduce opp-level bindings").

NOTE: we will do additional cleanup to totally remove the string from
the code and use the new dev_pm_opp_get_level() but we'll do it in a
future patch.  This will facilitate getting the important code fix in
sooner without having to deal with cross-maintainer dependencies.

This patch needs to land before the patch ("arm64: dts: sdm845: Add
gpu and gmu device nodes") since if a tree contains the device tree
patch but not this one you'll get a crash at bootup.

Fixes: 4b565ca5 ("drm/msm: Add A6XX device support")
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Reviewed-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 78a61cd42a64f3587862b372a79e1d6aaf131fd7 ]

Bit 6 in the ANACAP field is used to indicate that the ANA group ID
doesn't change while the namespace is attached to the controller.
There is an optimisation in the code to only allocate space
for the ANA group header, as the namespace list won't change and
hence would not need to be refreshed.
However, this optimisation was never carried over to the actual
workflow, which always assumes that the buffer is large enough
to hold the ANA header _and_ the namespace list.
So drop this optimisation and always allocate enough space.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 4c174e6366746ae8d49f9cc409f728eebb7a9ac9 ]

Currently, we have several problems with the timeout
handler:
1. If we timeout on the controller establishment flow, we will hang
because we don't execute the error recovery (and we shouldn't because
the create_ctrl flow needs to fail and cleanup on its own)
2. We might also hang if we get a disconnet on a queue while the
controller is already deleting. This racy flow can cause the controller
disable/shutdown admin command to hang.

We cannot complete a timed out request from the timeout handler without
mutual exclusion from the teardown flow (e.g. nvme_rdma_error_recovery_work).
So we serialize it in the timeout handler and teardown io and admin
queues to guarantee that no one races with us from completing the
request.
Reported-by: NJaesoo Lee <jalee@purestorage.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 17d91256898402daf4425cc541ac9cbf64574d9a ]

Changing mtu, channels, or buffer sizes ops call to netvsc_attach(),
rndis_set_subchannel(), which always reset the hash key to default
value. That will override hash key changed previously. This patch
fixes the problem by save the hash key, then restore it when we re-
add the netvsc device.

Fixes: ff4a4419 ("netvsc: allow get/set of RSS indirection table")
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: NMichael Kelley <mikelley@microsoft.com>
[sl: fix up subject line]
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7c9f335a3ff20557a92584199f3d35c7e992bbe5 ]

These assignments occur in multiple places. The patch refactor them
to a function for simplicity. It also puts the struct to heap area
for future expension.
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: NMichael Kelley <mikelley@microsoft.com>
[sl: fix up subject line]
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b4a10c750424e01b5e37372fef0a574ebf7b56c3 ]

Hyper-V hosts require us to disable RSS before changing RSS key,
otherwise the changing request will fail. This patch fixes the
coding error.

Fixes: ff4a4419 ("netvsc: allow get/set of RSS indirection table")
Reported-by: NWei Hu <weh@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: NMichael Kelley <mikelley@microsoft.com>
[sl: fix up subject line]
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 17b42a20d7ca59377788c6a2409e77569570cc10 ]

The connect_local_phy should return NULL (not negative errno) on
error, since its caller expects it.
Signed-off-by: NAtsushi Nemoto <atsushi.nemoto@sord.co.jp>
Acked-by: NThor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fe35a40e675473eb65f2f5462b82770f324b5689 ]

Assign fc_vport to ln->fc_vport before calling csio_fcoe_alloc_vnp() to
avoid a NULL pointer dereference in csio_vport_set_state().

ln->fc_vport is dereferenced in csio_vport_set_state().
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c41f59884be5cca293ed61f3d64637dbba3a6381 ]

We cannot wait on a completion object in the lpfc_nvme_targetport structure
in the _destroy_targetport() code path because the NVMe/fc transport will
free that structure immediately after the .targetport_delete() callback.
This results in a use-after-free, and a hang if slub_debug=FZPU is enabled.

Fix this by putting the completion on the stack.
Signed-off-by: NEwan D. Milne <emilne@redhat.com>
Acked-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7961cba6f7d8215fa632df3d220e5154bb825249 ]

We cannot wait on a completion object in the lpfc_nvme_lport structure in
the _destroy_localport() code path because the NVMe/fc transport will free
that structure immediately after the .localport_delete() callback.  This
results in a use-after-free, and a hang if slub_debug=FZPU is enabled.

Fix this by putting the completion on the stack.
Signed-off-by: NEwan D. Milne <emilne@redhat.com>
Acked-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7fc5854f8c6efae9e7624970ab49a1eac2faefb1 ]

sync_inodes_sb() can race against cgwb (cgroup writeback) membership
switches and fail to writeback some inodes.  For example, if an inode
switches to another wb while sync_inodes_sb() is in progress, the new
wb might not be visible to bdi_split_work_to_wbs() at all or the inode
might jump from a wb which hasn't issued writebacks yet to one which
already has.

This patch adds backing_dev_info->wb_switch_rwsem to synchronize cgwb
switch path against sync_inodes_sb() so that sync_inodes_sb() is
guaranteed to see all the target wbs and inodes can't jump wbs to
escape syncing.

v2: Fixed misplaced rwsem init.  Spotted by Jiufei.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NJiufei Xue <xuejiufei@gmail.com>
Link: http://lkml.kernel.org/r/dc694ae2-f07f-61e1-7097-7c8411cee12d@gmail.comAcked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8b9433eb4de3c26a9226c981c283f9f4896ae030 ]

On a DIO_SKIP_HOLES filesystem, the ->get_block() method is currently
not allowed to create blocks for an empty inode.  This confusion comes
from trying to bit shift a negative number, so check the size of the
inode first.

The problem is most visible for hfsplus, because the fallback to
buffered I/O doesn't happen and the write fails with EIO.  This is in
part the fault of the module, because it gives a wrong return value on
->get_block(); that will be fixed in a separate patch.
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NErnesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 31eb79db420a3f94c4c45a8c0a05cd30e333f981 ]

Often userspace doesn't know when the kernel will be calling dma_buf_detach
on the buffer.
If userpace starts its CPU access at the same time as the sg list is being
freed it could end up accessing the sg list after it has been freed.

Thread A				Thread B
- DMA_BUF_IOCTL_SYNC IOCT
 - ion_dma_buf_begin_cpu_access
  - list_for_each_entry
					- ion_dma_buf_detatch
					 - free_duped_table
   - dma_sync_sg_for_cpu

Fix this by getting the ion_buffer lock before freeing the sg table memory.

Fixes: 2a55e7b5 ("staging: android: ion: Call dma_map_sg for syncing and mapping")
Signed-off-by: NLiam Mark <lmark@codeaurora.org>
Acked-by: NLaura Abbott <labbott@redhat.com>
Acked-by: NAndrew F. Davis <afd@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5e1bc251cebc84b41b8eb5d2434e54d939a85430 ]

Although TMDS clock is required for HDMI to properly function,
nobody called clk_prepare_enable(). This fixes reference counting
issues and makes sure clock is running when it needs to be running.

Due to TDMS clock being parent clock for DDC clock, TDMS clock
was turned on/off for each EDID probe, causing spurious failures
for certain HDMI/DVI screens.

Fixes: 9c568101 ("drm/sun4i: Add HDMI support")
Signed-off-by: NPriit Laes <priit.laes@paf.com>
[Maxime: Moved the TMDS clock enable earlier]
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122073232.7240-1-plaes@plaes.orgSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 815d835b7ba46685c316b000013367dacb2b461b ]

Using over-sampling ratio, lpuart can accept baud rate upto uartclk / 4.
Signed-off-by: NTomonori Sakita <tomonori.sakita@sord.co.jp>
Signed-off-by: NAtsushi Nemoto <atsushi.nemoto@sord.co.jp>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e8a6ca808c5ed1e2b43ab25f1f2cbd43a7574f73 ]

The geni set/get_mctrl() functions currently do nothing unless
hardware flow control is enabled. Remove this arbitrary limitation.
Suggested-by: NJohan Hovold <johan@kernel.org>
Fixes: 8a8a66a1 ("tty: serial: qcom_geni_serial: Add support for flow control")
Signed-off-by: NMatthias Kaehlcke <mka@chromium.org>
Reviewed-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6d87dc97eb3341de3f7b1efa3156cb0e014f4a96 ]

gfxclk for OD setting is limited to 1980M for non-acg
ASICs of Vega10
Signed-off-by: NKenneth Feng <kenneth.feng@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e158488be27b157802753a59b336142dc0eb0380 ]

Because wake_q_add() can imply an immediate wakeup (cmpxchg failure
case), we must not rely on the wakeup being delayed. However, commit:

  e3851390 ("locking/rwsem: Rework zeroing reader waiter->task")

relies on exactly that behaviour in that the wakeup must not happen
until after we clear waiter->task.

[ peterz: Added changelog. ]
Signed-off-by: NXie Yongji <xieyongji@baidu.com>
Signed-off-by: NZhang Yu <zhangyu31@baidu.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: e3851390 ("locking/rwsem: Rework zeroing reader waiter->task")
Link: https://lkml.kernel.org/r/1543495830-2644-1-git-send-email-xieyongji@baidu.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b061c38bef43406df8e73c5be06cbfacad5ee6ad ]

We must not rely on wake_q_add() to delay the wakeup; in particular
commit:

  1d0dcb3a ("futex: Implement lockless wakeups")

moved wake_q_add() before smp_store_release(&q->lock_ptr, NULL), which
could result in futex_wait() waking before observing ->lock_ptr ==
NULL and going back to sleep again.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 1d0dcb3a ("futex: Implement lockless wakeups")
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 4c4e3731564c8945ac5ac90fc2a1e1f21cb79c92 ]

Notable cmpxchg() does not provide ordering when it fails, however
wake_q_add() requires ordering in this specific case too. Without this
it would be possible for the concurrent wakeup to not observe our
prior state.

Andrea Parri provided:

  C wake_up_q-wake_q_add

  {
	int next = 0;
	int y = 0;
  }

  P0(int *next, int *y)
  {
	int r0;

	/* in wake_up_q() */

	WRITE_ONCE(*next, 1);   /* node->next = NULL */
	smp_mb();               /* implied by wake_up_process() */
	r0 = READ_ONCE(*y);
  }

  P1(int *next, int *y)
  {
	int r1;

	/* in wake_q_add() */

	WRITE_ONCE(*y, 1);      /* wake_cond = true */
	smp_mb__before_atomic();
	r1 = cmpxchg_relaxed(next, 1, 2);
  }

  exists (0:r0=0 /\ 1:r1=0)

  This "exists" clause cannot be satisfied according to the LKMM:

  Test wake_up_q-wake_q_add Allowed
  States 3
  0:r0=0; 1:r1=1;
  0:r0=1; 1:r1=0;
  0:r0=1; 1:r1=1;
  No
  Witnesses
  Positive: 0 Negative: 3
  Condition exists (0:r0=0 /\ 1:r1=0)
  Observation wake_up_q-wake_q_add Never 0 3
Reported-by: NYongji Xie <elohimes@gmail.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6dc080eeb2ba01973bfff0d79844d7a59e12542e ]

For some peculiar reason rcuwait_wake_up() has the right barrier in
the comment, but not in the code.

This mistake has been observed to cause a deadlock in the following
situation:

    P1					P2

    percpu_up_read()			percpu_down_write()
      rcu_sync_is_idle() // false
					  rcu_sync_enter()
					  ...
      __percpu_up_read()

[S] ,-  __this_cpu_dec(*sem->read_count)
    |   smp_rmb();
[L] |   task = rcu_dereference(w->task) // NULL
    |
    |				    [S]	    w->task = current
    |					    smp_mb();
    |				    [L]	    readers_active_check() // fail
    `-> <store happens here>

Where the smp_rmb() (obviously) fails to constrain the store.

[ peterz: Added changelog. ]
Signed-off-by: NPrateek Sood <prsood@codeaurora.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NAndrea Parri <andrea.parri@amarulasolutions.com>
Acked-by: NDavidlohr Bueso <dbueso@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 8f95c90c ("sched/wait, RCU: Introduce rcuwait machinery")
Link: https://lkml.kernel.org/r/1543590656-7157-1-git-send-email-prsood@codeaurora.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a0dc02039a2ee54fb4ae400e0b755ed30e73e58c ]

In ieee80211_rx_h_mesh_fwding, we increment the 'dropped_frames_ttl'
counter when we decrement the ttl to zero.  For unicast frames
destined for other hosts, we stop processing the frame at that point.

For multicast frames, we do not rebroadcast it in this case, but we
do pass the frame up the stack to process it on this STA.  That
doesn't match the usual definition of "dropped," so don't count
those as such.

With this change, something like `ping6 -i0.2 ff02::1%mesh0` from a
peer in a ttl=1 network no longer increments the counter rapidly.
Signed-off-by: NBob Copeland <bobcopeland@fb.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 97715058b70da1262fd07798c8b2e3e894f759dd ]

When CONFIG_NO_AUTO_INLINE was present in linux-next (which added
'-fno-inline-functions' to KBUILD_CFLAGS), an allyesconfig build with
Clang failed at the modpost stage:

ERROR: "is_broadcast_mac_addr" [drivers/staging/rtl8723bs/r8723bs.ko] undefined!
ERROR: "is_zero_mac_addr" [drivers/staging/rtl8723bs/r8723bs.ko] undefined!
ERROR: "is_multicast_mac_addr" [drivers/staging/rtl8723bs/r8723bs.ko] undefined!

These functions were marked as extern inline, meaning that if inlining
doesn't happen, the function will be undefined, as it is above.

This happens to work with GCC because the '-fno-inline-functions' option
respects the __inline attribute so all instances of these functions are
inlined as expected and the definition doesn't actually matter. However,
with Clang and '-fno-inline-functions', a function has to be marked with
the __always_inline attribute to be considered for inlining, which none
of these functions are. Clang tries to find the symbol definition
elsewhere as it was told and fails, which trickles down to modpost.

To make sure that this code compiles regardless of compiler and make the
intention of the code clearer, use 'static' to ensure these functions
are always defined, regardless of inlining. Additionally, silence a
checkpatch warning by switching from '__inline' to 'inline'.
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 129699bb8c7572106b5bbb2407c2daee4727ccad ]

Changes since V1:
* Use dev_info instead of printk
* Use dev_warn instead of BUG_ON

Previously, sysfs_create_group was called before all initialization had
fully run - specifically, before pci_set_drvdata was called. Since the
sysctl group is visible to userspace as soon as sysfs_create_group
returns, a small window of time existed during which a process could read
from an uninitialized/partially-initialized device.

This commit moves the creation of the sysctl group to after all
initialized is completed. This ensures that it's impossible for
userspace to read from a sysctl file before initialization has fully
completed.

To catch any future regressions, I've added a check to ensure
that proc_thermal_emum_mode is never PROC_THERMAL_NONE when a process
tries to read from a sysctl file. Previously, the aforementioned race
condition could result in the 'else' branch
running while PROC_THERMAL_NONE was set,
leading to a null pointer deference.
Signed-off-by: NAaron Hill <aa1ronham@gmail.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ab6c03676cb190156603cf4c5ecf97aa406c9c53 ]

and use smaller/on-stack buffer instead

The motivation for this change was lockdep splat like below.

| potentially unexpected fatal signal 11.
| BUG: sleeping function called from invalid context at ../mm/page_alloc.c:4317
| in_atomic(): 1, irqs_disabled(): 0, pid: 57, name: segv
| no locks held by segv/57.
| Preemption disabled at:
| [<8182f17e>] get_signal+0x4a6/0x7c4
| CPU: 0 PID: 57 Comm: segv Not tainted 4.17.0+ #23
|
| Stack Trace:
|  arc_unwind_core.constprop.1+0xd0/0xf4
|  __might_sleep+0x1f6/0x234
|  __get_free_pages+0x174/0xca0
|  show_regs+0x22/0x330
|  get_signal+0x4ac/0x7c4     # print_fatal_signals() -> preempt_disable()
|  do_signal+0x30/0x224
|  resume_user_mode_begin+0x90/0xd8

So signal handling core calls show_regs() with preemption disabled but
an ensuing GFP_KERNEL page allocator call is flagged by lockdep.

We could have switched to GFP_NOWAIT, but turns out that is not enough
anways and eliding page allocator call leads to less code and
instruction traces to sift thru when debugging pesky crashes.

FWIW, this patch doesn't cure the lockdep splat (which next patch does).
Reviewed-by: NWilliam Kucharski <william.kucharski@oracle.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 4e868f8419cb4cb558c5d428e7ab5629cef864c7 ]

|  CC      mm/nobootmem.o
|In file included from ./include/asm-generic/bug.h:18:0,
|                 from ./arch/arc/include/asm/bug.h:32,
|                 from ./include/linux/bug.h:5,
|                 from ./include/linux/mmdebug.h:5,
|                 from ./include/linux/gfp.h:5,
|                 from ./include/linux/slab.h:15,
|                 from mm/nobootmem.c:14:
|mm/nobootmem.c: In function '__free_pages_memory':
|./include/linux/kernel.h:845:29: warning: comparison of distinct pointer types lacks a cast
|   (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
|                             ^
|./include/linux/kernel.h:859:4: note: in expansion of macro '__typecheck'
|   (__typecheck(x, y) && __no_side_effects(x, y))
|    ^~~~~~~~~~~
|./include/linux/kernel.h:869:24: note: in expansion of macro '__safe_cmp'
|  __builtin_choose_expr(__safe_cmp(x, y), \
|                        ^~~~~~~~~~
|./include/linux/kernel.h:878:19: note: in expansion of macro '__careful_cmp'
| #define min(x, y) __careful_cmp(x, y, <)
|                   ^~~~~~~~~~~~~
|mm/nobootmem.c:104:11: note: in expansion of macro 'min'
|   order = min(MAX_ORDER - 1UL, __ffs(start));

Change __ffs return value from 'int' to 'unsigned long' as it
is done in other implementations (like asm-generic, x86, etc...)
to avoid build-time warnings in places where type is strictly
checked.

As __ffs may return values in [0-31] interval changing return
type to unsigned is valid.
Signed-off-by: NEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c530bb8a726a37811e9fb5d68cd6b5408173b545 ]

The mbi_lock mutex is left uninitialized, so let's use DEFINE_MUTEX
to initialize it statically.

Fixes: 50528752 ("irqchip/gic-v3: Add support for Message Based Interrupts as an MSI controller")
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>