- 20 2月, 2013 12 次提交
-
-
由 Liu Bo 提交于
commit d53ba474 (Btrfs: use commit root when loading free space cache) has remove the deadlock check, and the related comments can be removed as well. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Josef Bacik 提交于
If we start running low on metadata space we will try to allocate a chunk, which could then try to allocate a chunk to add the device entry. The thing is we allocate a chunk before we try really hard to make the allocation, so we should be able to find space for the device entry. Add a flag to the trans handle so we know we're currently allocating a chunk so we can just bail out if we try to allocate another chunk. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Josef Bacik 提交于
Since we don't actually copy the extent information from the source tree in the fast case we don't need to wait for ordered io to be completed in order to fsync, we just need to wait for the io to be completed. So when we're logging our file just attach all of the ordered extents to the log, and then when the log syncs just wait for IO_DONE on the ordered extents and then write the super. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Miao Xie 提交于
This patch fixes the following problem: - improper return value - unnecessary read-only check Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Miao Xie 提交于
Use wrapper page_offset to get byte-offset into filesystem object for page. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Miao Xie 提交于
We may try to flush some dirty pages when there is no enough space to reserve. But it is possible that this operation fails, in order to get enough space to reserve successfully, we will sync all the delalloc file. This operation is safe, we needn't worry about the case that the filesystem goes from r/w to r/o. because the filesystem should guarantee all the dirty pages have been written into the disk after it becomes readonly, so the sync operation will do nothing if the filesystem is already readonly. Though it may waste lots of time, as a corner case, we needn't care. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Miao Xie 提交于
Locking and unlocking delayed ref mutex are in the different functions, and the name of lock functions is not uniform, so the readability is not so good, this patch optimizes the lock logic and makes it more readable. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Miao Xie 提交于
We're running into having 50-100 orphans left over with xfstests 83 because of ENOSPC when trying to start the transaction for the inode update. But in fact, it makes no sense in updating the inode for the new size while we're deleting the stupid thing. This patch fixes this problem. Reported-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Miao Xie 提交于
The delayed item commit code in several functions is similar, so cleanup it. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Miao Xie 提交于
Since we do not want to delay the async transaction commit, we should use common work, not delayed work. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
-
由 Miao Xie 提交于
We clear the transaction object and the trans handle when they are about to be freed, it is unnecessary, cleanup it. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
-
由 Miao Xie 提交于
The delayed reference allocation is in the fast path of the IO, so use slabs to improve the speed of the allocation. And besides that, it can do check for leaked objects when the module is removed. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
-
- 16 2月, 2013 1 次提交
-
-
由 David Sterba 提交于
btrfs_scan_one_device is calling set_blocksize() which can race with a concurrent process making dirty page cache pages. It can end up dropping dirty page cache pages on the floor, which isn't very nice when someone is just running btrfs dev scan to find filesystems on the box. Now that udev is registering btrfs devices as it discovers them, we can actually end up racing with our own mkfs program too. When this happens, we drop some of the important blocks written by mkfs. This commit changes scan_one_device to read the super out of the page cache instead of trying to use bread. This way we don't have to care about the blocksize of the device. This also drops the invalidate_bdev() call. It wasn't very polite to invalidate during the scan either. mkfs is putting the super into the page cache, there's no reason to invalidate at this point. Signed-off-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
- 15 2月, 2013 1 次提交
-
-
由 Arne Jansen 提交于
When replaying a log tree with qgroups enabled, tree_mod_log_rewind does a sanity-check of the number of items against the maximum possible number. It calculates that number with the nodesize of fs_root. Unfortunately fs_root is not yet set at this stage. So instead use the nodesize from tree_root, which is already initialized. Signed-off-by: NArne Jansen <sensille@gmx.net> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
- 07 2月, 2013 1 次提交
-
-
由 Chris Mason 提交于
Dave Sterba triggered a lockdep complaint about lock ordering between the sb_internal lock and the cleaner semaphore. btrfs_lookup_dentry() checks for orphans if we're looking up the inode for a subvolume, and subvolume creation is triggering the lookup with a transaction running. This commit moves the d_instantiate after the transaction closes. Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
- 06 2月, 2013 7 次提交
-
-
由 Jan Schmidt 提交于
When btrfs_qgroup_reserve returned a failure, we were missing a counter operation for BTRFS_I(inode)->outstanding_extents++, leading to warning messages about outstanding extents and space_info->bytes_may_use != 0. Additionally, the error handling code didn't take into account that we dropped the inode lock which might require more cleanup. Luckily, all the cleanup code we need is already there and can be shared with reserve_metadata_bytes, which is exactly what this patch does. Reported-by: NLev Vainblat <lev@zadarastorage.com> Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
We specifically do not update the disk i_size if there are ordered extents outstanding for any area between the current disk_i_size and our ordered extent so that we do not expose stale data. The problem is the check we have only checks if the ordered extent starts at or after the current disk_i_size, which doesn't take into account an ordered extent that starts before the current disk_i_size and ends past the disk_i_size. Fix this by checking if the extent ends past the disk_i_size. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Josef Bacik 提交于
If we have an ordered extent before the ordered extent we are currently completing that is after the current disk_i_size we will put our i_size update into that ordered extent so that we do not expose stale data. The problem is that if our disk i_size is updated past the previous ordered extent we won't update the i_size with the pending i_size update. So check the pending i_size update and if its above the current disk i_size we need to go ahead and try to update. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Liu Bo 提交于
While running snapshot testscript created by Mitch and David, the race between autodefrag and snapshot deletion can lead to corruption of dead_root list so that we can get crash on btrfs_clean_old_snapshots(). And besides autodefrag, scrub also does the same thing, ie. read root first and get inode. Here is the story(take autodefrag as an example): (1) when we delete a snapshot or subvolume, it will set its root's refs to zero and do a iput() on its own inode, and if this inode happens to be the only active in-meory one in root's inode rbtree, it will add itself to the global dead_roots list for later cleanup. (2) after (1), the autodefrag thread may read another inode for defrag and the inode is just in the deleted snapshot/subvolume, but all of these are without checking if the root is still valid(refs > 0). So the end up result is adding the deleted snapshot/subvolume's root to the global dead_roots list AGAIN. Fortunately, we already have a srcu lock to avoid the race, ie. subvol_srcu. So all we need to do is to take the lock to protect 'read root and get inode', since we synchronize to wait for the rcu grace period before adding something to the global dead_roots list. Reported-by: NMitch Harder <mitch.harder@sabayonlinux.org> Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Miao Xie 提交于
When we fail to start a transaction, we need to release the reserved free space and qgroup space, fix it. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Reviewed-by: NJan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Miao Xie 提交于
If the checks at the beginning of btrfs_file_aio_write() fail, we needn't decrease ->sync_writers, because we have not increased it. Fix it. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Josef Bacik 提交于
You can run into this problem where if somebody is fsyncing and writing out the existing extents you will have removed the extent map from the em tree, but it's still valid for the current fsync so we go ahead and write it. The problem is we unconditionally try to merge it back into the em tree, but if we've removed it from the em tree that will cause use after free problems. Fix this to only merge if we are still a part of the tree. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
- 02 2月, 2013 1 次提交
-
-
由 Eric Sandeen 提交于
If we remove a missing device, bdev is null, and if we send that off to btrfs_kobject_uevent we'll panic. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
- 25 1月, 2013 8 次提交
-
-
由 Miao Xie 提交于
btrfs_start_delalloc_inodes() locks the delalloc_inodes list, fetches the first inode, unlocks the list, triggers btrfs_alloc_delalloc_work/ btrfs_queue_worker for this inode, and then it locks the list, checks the head of the list again. But because we don't delete the first inode that it deals with before, it will fetch the same inode. As a result, this function allocates a huge amount of btrfs_delalloc_work structures, and OOM happens. Fix this problem by splice this delalloc list. Reported-by: NAlex Lyakas <alex.btrfs@zadarastorage.com> Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Miao Xie 提交于
The max device number of single profile is 1, not 0 (0 means 'as many as possible'). Fix it. Cc: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Reviewed-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Miao Xie 提交于
First, though the current transaction->aborted check can stop the commit early and avoid unnecessary operations, it is too early, and some transaction handles don't end, those handles may set transaction->aborted after the check. Second, when we commit the transaction, we will wake up some worker threads to flush the space cache and inode cache. Those threads also allocate some transaction handles and may set transaction->aborted if some serious error happens. So we need more check for ->aborted when committing the transaction. Fix it. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Miao Xie 提交于
We may access and update transaction->aborted on the different CPUs without lock, so we need ACCESS_ONCE() wrapper to prevent the compiler from creating unsolicited accesses and make sure we can get the right value. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Josef Bacik 提交于
I noticed a WARN_ON going off when adding csums because we were going over the amount of csum bytes that should have been allowed for an ordered extent. This is a leftover from when we used to hold the csums privately for direct io, but now we use the normal ordered sum stuff so we need to make sure and check if we've moved on to another extent so that the csums are added to the right extent. Without this we could end up with csums for bytenrs that don't have extents to cover them yet. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Liu Bo 提交于
For compressed extents, the range of checksum is covered by disk length, and the disk length is different with ram length, so we need to use disk length instead to get us the right checksum. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Josef Bacik 提交于
A user reported a BUG_ON(ret) that occured during tree log replay. Ret was -EAGAIN, so what I think happened is that we removed an extent that covered a bitmap entry and an extent entry. We remove the part from the bitmap and return -EAGAIN and then search for the next piece we want to remove, which happens to be an entire extent entry, so we just free the sucker and return. The problem is ret is still set to -EAGAIN so we trip the BUG_ON(). The user used btrfs-zero-log so I'm not 100% sure this is what happened so I've added a WARN_ON() to catch the other possibility. Thanks, Reported-by: NJan Steffens <jan.steffens@gmail.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Josef Bacik 提交于
We drop the extent map tree lock while we're logging extents, so somebody could come in and merge another extent into this one and screw up our logging, or they could even remove us from the list which would keep us from logging the extent or freeing our ref on it, so we need to make sure to not clear LOGGING until after the extent is logged, and then we can merge it to adjacent extents. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
- 22 1月, 2013 3 次提交
-
-
由 Ilya Dryomov 提交于
Commit 3fed40cc ("Btrfs: cleanup duplicated division functions"), which was merged into 3.8-rc1, has introduced a regression by removing logic that was guarding us against bad user input. Bring it back. Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Arne Jansen 提交于
Currently you can just destroy a qgroup even though it is in use by other qgroups or has qgroups assigned to it. This patch prevents destruction of qgroups unless they are completely unused. Otherwise destroy will return EBUSY. Reported-by: NEric Hopper <hopper@omnifarious.org> Signed-off-by: NArne Jansen <sensille@gmx.net> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Arne Jansen 提交于
If a qgroup that has still assignments is deleted by the user, the corresponding relations are left in the tree. This leads to an unmountable filesystem. With this patch, those relations are simple ignored. Reported-by: NEric Hopper <hopper@omnifarious.org> Signed-off-by: NArne Jansen <sensille@gmx.net> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
- 20 1月, 2013 5 次提交
-
-
由 Ilya Dryomov 提交于
Operation-specific check (whether subvol is readonly or not) should go after the mutual exclusiveness check. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Fix unlock order in btrfs_ioctl_rm_dev(). Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Fix unlock order in btrfs_ioctl_resize(). Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
The error code that is returned in response to starting a mutually exclusive operation when there is one already running got silently changed from EINVAL to EINPROGRESS by 5ac00add. Returning EINPROGRESS to, say, add_dev, when rm_dev is running is misleading. Furthermore, the operation itself may want to use EINPROGRESS for other purposes. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Balance pause/resume logic got broken by 5ac00add (went in into 3.8-rc1 as part of dev-replace merge). Offending commit took a stab at making mutually exclusive volume operations (add_dev, rm_dev, resize, balance, replace_dev) not block behind volume_mutex if another such operation is in progress and instead return an error right away. Balancing front-end relied on the blocking behaviour, so the fix is ugly, but short of a complete rework, it's the best we can do. Reported-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
- 15 1月, 2013 1 次提交
-
-
由 Eric Sandeen 提交于
truncate() vs. ftruncate() differ in the VFS; truncate() doesn't set (ATTR_CTIME | ATTR_MTIME), and it's up to the fs to do the timestamp updates if the size changes. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
-