- 07 4月, 2011 3 次提交
-
-
由 Joerg Roedel 提交于
These functions all operate on protection domains and not on singe IOMMUs. Represent that in their name. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
The logic to reset the command buffer caused more problems than it actually helped. The logic jumped in when the IOMMU hardware doesn't execute commands anymore but the reasons for this are usually not fixed by just resetting the command buffer. So the code can be removed to reduce complexity. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
This patch cleans up the implementation of completion-wait command sending. It also switches the completion indicator from the MMIO bit to a memory store which can be checked without IOMMU locking. As a side effect this patch makes the __iommu_queue_command function obsolete and so it is removed too. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
- 06 4月, 2011 23 次提交
-
-
由 Joerg Roedel 提交于
This patch reworks the processing of invalidate-pages commands to the IOMMU. The function building the the command is extended so we can get rid of another function. It was also renamed to match with the other function names. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
This patch moves command building for the invalidate-dte command into its own function. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
This patch introduces a seperate function for building completion-wait commands. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-2.6-block: ide: always ensure that blk_delay_queue() is called if we have pending IO block: fix request sorting at unplug dm: improve block integrity support fs: export empty_aops ide: ide_requeue_and_plug() reinstate "always plug" behaviour blk-throttle: don't call xchg on bool ufs: remove unessecary blk_flush_plug block: make the flush insertion use the tail of the dispatch list block: get rid of elv_insert() interface block: dump request state on seeing a corrupted request completion
-
由 Eric Paris 提交于
On an error path in inotify_init1 a normal user can trigger a double free of struct user. This is a regression introduced by a2ae4cc9 ("inotify: stop kernel memory leak on file creation failure"). We fix this by making sure that if a group exists the user reference is dropped when the group is cleaned up. We should not explictly drop the reference on error and also drop the reference when the group is cleaned up. The new lifetime rules are that an inotify group lives from inotify_new_group to the last fsnotify_put_group. Since the struct user and inotify_devs are directly tied to this lifetime they are only changed/updated in those two locations. We get rid of all special casing of struct user or user->inotify_devs. Signed-off-by: NEric Paris <eparis@redhat.com> Cc: stable@kernel.org (2.6.37 and up) Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jens Axboe 提交于
Just because we are not requeuing a request does not mean that some aren't pending. So always issue a blk_delay_queue() if either we are requeueing OR there's pending IO. This fixes a boot problem for some IDE boxes. Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Konstantin Khlebnikov 提交于
Comparison function for list_sort() must be anticommutative, otherwise it is not sorting in ordinary meaning. But fortunately list_sort() always check ((*cmp)(priv, a, b) <= 0) it not distinguish negative and zero, so comparison function can implement only less-or-equal instead of full three-way comparison. Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Mike Snitzer 提交于
The current block integrity (DIF/DIX) support in DM is verifying that all devices' integrity profiles match during DM device resume (which is past the point of no return). To some degree that is unavoidable (stacked DM devices force this late checking). But for most DM devices (which aren't stacking on other DM devices) the ideal time to verify all integrity profiles match is during table load. Introduce the notion of an "initialized" integrity profile: a profile that was blk_integrity_register()'d with a non-NULL 'blk_integrity' template. Add blk_integrity_is_initialized() to allow checking if a profile was initialized. Update DM integrity support to: - check all devices with _initialized_ integrity profiles match during table load; uninitialized profiles (e.g. for underlying DM device(s) of a stacked DM device) are ignored. - disallow a table load that would result in an integrity profile that conflicts with a DM device's existing (in-use) integrity profile - avoid clearing an existing integrity profile - validate all integrity profiles match during resume; but if they don't all we can do is report the mismatch (during resume we're past the point of no return) Signed-off-by: NMike Snitzer <snitzer@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Jens Axboe 提交于
With the ->sync_page() hook gone, we have a few users that add their own static address_space_operations without any functions defined. fs/inode.c already has an empty_aops that it uses for init purposes. Lets export that and use it in the places where an otherwise empty aops was defined. Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Jens Axboe 提交于
We see stalls if we don't always ensure that the queue gets run again. Even if rq == NULL, we could have other pending requests in the queue. Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Andreas Schwab 提交于
xchg does not work portably with smaller than 32bit types. Signed-off-by: NAndreas Schwab <schwab@linux-m68k.org> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Christoph Hellwig 提交于
We already flush the per-process plugging list when context switching, so a blk_flush_plug call just before a yield() is not needed. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Jens Axboe 提交于
It's not a preempt type request, in fact we have to insert it behind requests that do specify INSERT_FRONT. Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Jens Axboe 提交于
Merge it with __elv_add_request(), it's pretty pointless to have a function with only two callers. The main interface is elv_add_request()/__elv_add_request(). Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Jens Axboe 提交于
Currently we just dump a non-informative 'request botched' message. Lets actually try and print something sane to help debug issues around this. Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6由 Linus Torvalds 提交于
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: drm/i915/lvds: Remove 0xa0 DDC probe for LVDS drm/i915/crt: Remove 0xa0 probe for VGA
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: rpckbd - fix a leak of the IRQ during init failure Input: wacom - add support for Lenovo tablet ID (0xE6) Input: i8042 - downgrade selftest error message to dbg() Input: synaptics - fix crash in synaptics_module_init() Input: spear-keyboard - fix inverted condition in interrupt handler Input: uinput - allow for 0/0 min/max on absolute axes. Input: sparse-keymap - report KEY_UNKNOWN for unknown scan codes Input: sparse-keymap - report scancodes with key events Input: h3600_ts_input - fix a spelling error Input: wacom - report resolution for pen devices Input: wacom - constify wacom_features for a new missed Bamboo models
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pseries: Fix build without CONFIG_HOTPLUG_CPU powerpc: Set nr_cpu_ids early and use it to free PACAs powerpc/pseries: Don't register global initcall powerpc/kexec: Fix mismatched ifdefs for PPC64/SMP. edac/mpc85xx: Limit setting/clearing of HID1[RFXE] to e500v1/v2 cores powerpc/85xx: Update dts for PCIe memory maps to match u-boot of Px020RDB
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: don't warn in btrfs_add_orphan Btrfs: fix free space cache when there are pinned extents and clusters V2 Btrfs: Fix uninitialized root flags for subvolumes btrfs: clear __GFP_FS flag in the space cache inode Btrfs: fix memory leak in start_transaction() Btrfs: fix memory leak in btrfs_ioctl_start_sync() Btrfs: fix subvol_sem leak in btrfs_rename() Btrfs: Fix oops for defrag with compression turned on Btrfs: fix /proc/mounts info. Btrfs: fix compiler warning in file.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits) ipv6: Don't pass invalid dst_entry pointer to dst_release(). mlx4: fix kfree on error path in new_steering_entry() tcp: len check is unnecessarily devastating, change to WARN_ON sctp: malloc enough room for asconf-ack chunk sctp: fix auth_hmacs field's length of struct sctp_cookie net: Fix dev dev_ethtool_get_rx_csum() for forced NETIF_F_RXCSUM usbnet: use eth%d name for known ethernet devices starfire: clean up dma_addr_t size test iwlegacy: fix bugs in change_interface carl9170: Fix tx aggregation problems with some clients iwl3945: disable hw scan by default wireless: rt2x00: rt2800usb.c add and identify ids iwl3945: do not deprecate software scan mac80211: fix aggregation frame release during timeout cfg80211: fix BSS double-unlinking (continued) cfg80211:: fix possible NULL pointer dereference mac80211: fix possible NULL pointer dereference mac80211: fix NULL pointer dereference in ieee80211_key_alloc() ath9k: fix a chip wakeup related crash in ath9k_start mac80211: fix a crash in minstrel_ht in HT mode with no supported MCS rates ...
-
由 Chris Wilson 提交于
This is a revert of 428d2e82. This is broken in the same manner as for VGA: trying to write to an invalid address on the (currently 7-bit) i2c bus. One notable failure appears to be for MacBooks. The scary part was that it gave the appearance of working (i.e. reporting the absence of the panel) on various all-in-one machines with ghost LVDS panels and not failing for laptops. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Acked-by: NDave Airlie <airlied@linux.ie> Signed-off-by: NKeith Packard <keithp@keithp.com>
-
由 Chris Wilson 提交于
This is a moral revert of 6ec3d0c0. Following the fix to reset the GMBUS controller after a NAK, we finally utilize the 0xa0 probe for a CRT connection. And discover that the code is broken. Shock. There are a number of issues, but following a key insight from Dave Airlie, that 0xA0 is an invalid address on a 7-bit bus (though not if we were to enable 10-bit addressing), and would look like the EDID port 0x50, it is possible to see where the confusion starts. In short, a write to 0xA0 is accepted by the GMBUS controller which we interpreted as meaning the existence of a connection (a slave on the other end of the wire ACKing the write). That was false. During testing with a broken GMBUS implementation, which never reset an earlier NAK, this test always reported a NAK and so we proceeded on to the next test. Reported-and-tested-by: NSitsofe Wheeler <sitsofe@yahoo.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=35904Reported-and-tested-by: NRiccardo Magliocchetti <riccardo.magliocchetti@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=32612Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Acked-by: NDave Airlie <airlied@linux.ie> Signed-off-by: NKeith Packard <keithp@keithp.com>
-
- 05 4月, 2011 14 次提交
-
-
由 Matt Evans 提交于
Signed-off-by: NMatt Evans <matt@ozlabs.au.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Ryan Grimm 提交于
Without this, "holes" in the CPU numbering can cause us to free too many PACAs Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Paul Gortmaker 提交于
Commit b3df895a "powerpc/kexec: Add support for FSL-BookE" introduced the original PPC_STD_MMU_64 checks around the function crash_kexec_wait_realmode(). Then commit c2be0548 "powerpc: Fix default_machine_crash_shutdown #ifdef botch" changed the ifdef around the calling site to add a check on SMP, but the ifdef around the function itself was left unchanged, leaving an unused function for PPC_STD_MMU_64=y and SMP=n Rather than have two ifdefs that can get out of sync like this, simply put the corrected conditional around the function and use a stub to get rid of one set of ifdefs completely. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
-
由 Josef Bacik 提交于
When I moved the orphan adding to btrfs_truncate I missed the fact that during orphan cleanup we just add the orphan items to the orphan list without going through btrfs_orphan_add, which results in lots of warnings on mount if you have any orphan items that need to be truncated. Just remove this warning since it's ok, this will allow all of the normal space accounting take place. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Josef Bacik 提交于
I noticed a huge problem with the free space cache that was presenting as an early ENOSPC. Turns out when writing the free space cache out I forgot to take into account pinned extents and more importantly clusters. This would result in us leaking free space everytime we unmounted the filesystem and remounted it. I fix this by making sure to check and see if the current block group has a cluster and writing out any entries that are in the cluster to the cache, as well as writing any pinned extents we currently have to the cache since those will be available for us to use the next time the fs mounts. This patch also adds a check to the end of load_free_space_cache to make sure we got the right amount of free space cache, and if not make sure to clear the cache and re-cache the old fashioned way. Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Li Zefan 提交于
root_item->flags and root_item->byte_limit are not initialized when a subvolume is created. This bug is not revealed until we added readonly snapshot support - now you mount a btrfs filesystem and you may find the subvolumes in it are readonly. To work around this problem, we steal a bit from root_item->inode_item->flags, and use it to indicate if those fields have been properly initialized. When we read a tree root from disk, we check if the bit is set, and if not we'll set the flag and initialize the two fields of the root item. Reported-by: NAndreas Philipp <philipp.andreas@gmail.com> Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Tested-by: NAndreas Philipp <philipp.andreas@gmail.com> cc: stable@kernel.org Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Miao Xie 提交于
the object id of the space cache inode's key is allocated from the relative root, just like the regular file. So we can't identify space cache inode by checking the object id of the inode's key, and we have to clear __GFP_FS flag at the time we look up the space cache inode. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yoshinori Sano 提交于
Free btrfs_trans_handle when join_transaction() fails in start_transaction() Signed-off-by: NYoshinori Sano <yoshinori.sano@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Tsutomu Itoh 提交于
Call btrfs_end_transaction() if btrfs_commit_transaction_async() fails. Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Johann Lombardi 提交于
btrfs_rename() does not release the subvol_sem if the transaction failed to start. Signed-off-by: NJohann Lombardi <johann@whamcloud.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Li Zefan 提交于
When we defrag a file, whose size can be fit into an inline extent, with compression enabled, the compress type is set to be fs_info->compress_type, which is 0 if the btrfs filesystem is mounted without compress option. This leads to oops. Reported-by: NDaniel Blueman <daniel.blueman@gmail.com> Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Tsutomu Itoh 提交于
Some mount options are not displayed by /proc/mounts. This patch displays the option such as compress_type by /proc/mounts. Ex. [before] $ mount | grep sdc2 /dev/sdc2 on /test12 type btrfs (rw,space_cache,compress=lzo) $ cat /proc/mounts | grep sdc2 /dev/sdc2 /test12 btrfs rw,relatime,compress 0 0 [after] $ mount | grep sdc2 /dev/sdc2 on /test12 type btrfs (rw,space_cache,compress=lzo) $ cat /proc/mounts | grep sdc2 /dev/sdc2 /test12 btrfs rw,relatime,compress=lzo,space_cache 0 0 Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-