The ERRATA_MIDR_REV_RANGE macro assigns ARM64_CPUCAP_LOCAL_CPU_ERRATUM
to the '.type' field of the 'struct arm64_cpu_capabilities', so there's
no need to assign it explicitly as well.
Signed-off-by: NWill Deacon <will.deacon@arm.com>

arm64 requires break-before-make. Originally, before
setting up new pmd/pud entry for huge mapping, in few
cases, the modifying pmd/pud entry was still valid
and pointing to next level page table as we only
clear off leaf PTE in unmap leg.

 a) This was resulting into stale entry in TLBs (as few
    TLBs also cache intermediate mapping for performance
    reasons)
 b) Also, modifying pmd/pud was the only reference to
    next level page table and it was getting lost without
    freeing it. So, page leaks were happening.

Implement pud_free_pmd_page() and pmd_free_pte_page() to
enforce BBM and also free the leaking page tables.

Implementation requires,
 1) Clearing off the current pud/pmd entry
 2) Invalidation of TLB
 3) Freeing of the un-used next level page tables
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NChintan Pandya <cpandya@codeaurora.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Add an interface to invalidate intermediate page tables
from TLB for kernel.
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NChintan Pandya <cpandya@codeaurora.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Merge branch 'x86/mm' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into aarch64/for-next/core

Pull in core ioremap changes from -tip, since we depend on these for
re-enabling huge I/O mappings on arm64.
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Patching kernel instructions at runtime requires other CPUs to undergo
a context synchronisation event via an explicit ISB or an IPI in order
to ensure that the new instructions are visible. This is required even
for "hotpatch" instructions such as NOP and BL, so avoid optimising in
this case and always go via stop_machine() when performing general
patching.

ftrace isn't quite as strict, so it can continue to call the nosync
code directly.
Signed-off-by: NWill Deacon <will.deacon@arm.com>

When invalidating the instruction cache for a kernel mapping via
flush_icache_range(), it is also necessary to flush the pipeline for
other CPUs so that instructions fetched into the pipeline before the
I-cache invalidation are discarded. For example, if module 'foo' is
unloaded and then module 'bar' is loaded into the same area of memory,
a CPU could end up executing instructions from 'foo' when branching into
'bar' if these instructions were fetched into the pipeline before 'foo'
was unloaded.

Whilst this is highly unlikely to occur in practice, particularly as
any exception acts as a context-synchronizing operation, following the
letter of the architecture requires us to execute an ISB on each CPU
in order for the new instruction stream to be visible.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Now that users have been migrated to PSR_AA32, kill the unused
COMPAT_PSR definitions.

The only difference we need a definition for is COMPAT_PSR_DIT_BIT,
which differs from PSR_AA32_DIT_BIT.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Some code cares about the SPSR_ELx format for exceptions taken from
AArch32 to inspect or manipulate the SPSR_ELx value, which is already in
the SPSR_ELx format, and not in the AArch32 PSR format.

To separate these from cases where we care about the AArch32 PSR format,
migrate these cases to use the PSR_AA32_* definitions rather than
COMPAT_PSR_*.

There should be no functional change as a result of this patch.

Note that arm64 KVM does not support a compat KVM API, and always uses
the SPSR_ELx format, even for AArch32 guests.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NChristoffer Dall <christoffer.dall@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Some code cares about the SPSR_ELx format for exceptions taken from
AArch32 to inspect or manipulate the SPSR_ELx value, which is already in
the SPSR_ELx format, and not in the AArch32 PSR format.

To separate these from cases where we care about the AArch32 PSR format,
migrate these cases to use the PSR_AA32_* definitions rather than
COMPAT_PSR_*.

There should be no functional change as a result of this patch.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The SPSR_ELx format for exceptions taken from AArch32 is slightly
different to the AArch32 PSR format.

Map between the two in the compat ptrace code.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Fixes: 7206dc93 ("arm64: Expose Arm v8.4 features")
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The SPSR_ELx format for exceptions taken from AArch32 differs from the
AArch32 PSR format. Thus, we must translate between the two when setting
up a compat sigframe, or restoring context from a compat sigframe.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Fixes: 7206dc93 ("arm64: Expose Arm v8.4 features")
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Currently valid_user_regs() treats SPSR_ELx.DIT as a RES0 bit, causing
it to be zeroed upon exception return, rather than preserved. Thus, code
relying on DIT will not function as expected, and may expose an
unexpected timing sidechannel.

Let's remove DIT from the set of RES0 bits, such that it is preserved.
At the same time, the related comment is updated to better describe the
situation, and to take into account the most recent documentation of
SPSR_ELx, in ARM DDI 0487C.a.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Fixes: 7206dc93 ("arm64: Expose Arm v8.4 features")
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The AArch32 CPSR/SPSR format is *almost* identical to the AArch64
SPSR_ELx format for exceptions taken from AArch32, but the two have
diverged with the addition of DIT, and we need to treat the two as
logically distinct.

This patch adds new definitions for the SPSR_ELx format for exceptions
taken from AArch32, with a consistent PSR_AA32_ prefix. The existing
COMPAT_PSR_ definitions will be used for the PSR format as seen from
AArch32.

Definitions of DIT are provided for both, and inline functions are
provided to map between the two formats. Note that for SPSR_ELx, the
(RES0) J bit has been re-allocated as the DIT bit.

Once users of the COMPAT_PSR definitions have been migrated over to the
PSR_AA32 definitions, the (majority of) the former will be removed, so
no efforts is made to avoid duplication until then.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Track mismatches in the cache type register (CTR_EL0), other
than the D/I min line sizes and trap user accesses if there are any.

Fixes: be68a8aa ("arm64: cpufeature: Fix CTR_EL0 field definitions")
Cc: <stable@vger.kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

If there is a mismatch in the I/D min line size, we must
always use the system wide safe value both in applications
and in the kernel, while performing cache operations. However,
we have been checking more bits than just the min line sizes,
which triggers false negatives. We may need to trap the user
accesses in such cases, but not necessarily patch the kernel.

This patch fixes the check to do the right thing as advertised.
A new capability will be added to check mismatches in other
fields and ensure we trap the CTR accesses.

Fixes: be68a8aa ("arm64: cpufeature: Fix CTR_EL0 field definitions")
Cc: <stable@vger.kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

When running with CONFIG_PREEMPT=n, the spinlock fastpaths fit inside
64 bytes, which typically coincides with the L1 I-cache line size.

Inline the spinlock fastpaths, like we do already for rwlocks.
Signed-off-by: NWill Deacon <will.deacon@arm.com>

It's fair to say that our ticket lock has served us well over time, but
it's time to bite the bullet and start using the generic qspinlock code
so we can make use of explicit MCS queuing and potentially better PV
performance in future.
Signed-off-by: NWill Deacon <will.deacon@arm.com>

We can provide an implementation of smp_cond_load_relaxed using READ_ONCE
and __cmpwait_relaxed.
Signed-off-by: NWill Deacon <will.deacon@arm.com>

ioremap() calls pud_free_pmd_page() / pmd_free_pte_page() when it creates
a pud / pmd map.  The following preconditions are met at their entry.
 - All pte entries for a target pud/pmd address range have been cleared.
 - System-wide TLB purges have been peformed for a target pud/pmd address
   range.

The preconditions assure that there is no stale TLB entry for the range.
Speculation may not cache TLB entries since it requires all levels of page
entries, including ptes, to have P & A-bits set for an associated address.
However, speculation may cache pud/pmd entries (paging-structure caches)
when they have P-bit set.

Add a system-wide TLB purge (INVLPG) to a single page after clearing
pud/pmd entry's P-bit.

SDM 4.10.4.1, Operation that Invalidate TLBs and Paging-Structure Caches,
states that:
  INVLPG invalidates all paging-structure caches associated with the
  current PCID regardless of the liner addresses to which they correspond.

Fixes: 28ee90fe ("x86/mm: implement free pmd/pte page interfaces")
Signed-off-by: NToshi Kani <toshi.kani@hpe.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: mhocko@suse.com
Cc: akpm@linux-foundation.org
Cc: hpa@zytor.com
Cc: cpandya@codeaurora.org
Cc: linux-mm@kvack.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: Joerg Roedel <joro@8bytes.org>
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20180627141348.21777-4-toshi.kani@hpe.com

The following kernel panic was observed on ARM64 platform due to a stale
TLB entry.

 1. ioremap with 4K size, a valid pte page table is set.
 2. iounmap it, its pte entry is set to 0.
 3. ioremap the same address with 2M size, update its pmd entry with
    a new value.
 4. CPU may hit an exception because the old pmd entry is still in TLB,
    which leads to a kernel panic.

Commit b6bdb751 ("mm/vmalloc: add interfaces to free unmapped page
table") has addressed this panic by falling to pte mappings in the above
case on ARM64.

To support pmd mappings in all cases, TLB purge needs to be performed
in this case on ARM64.

Add a new arg, 'addr', to pud_free_pmd_page() and pmd_free_pte_page()
so that TLB purge can be added later in seprate patches.

[toshi.kani@hpe.com: merge changes, rewrite patch description]
Fixes: 28ee90fe ("x86/mm: implement free pmd/pte page interfaces")
Signed-off-by: NChintan Pandya <cpandya@codeaurora.org>
Signed-off-by: NToshi Kani <toshi.kani@hpe.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: mhocko@suse.com
Cc: akpm@linux-foundation.org
Cc: hpa@zytor.com
Cc: linux-mm@kvack.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: Will Deacon <will.deacon@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20180627141348.21777-3-toshi.kani@hpe.com

ioremap() supports pmd mappings on x86-PAE.  However, kernel's pmd
tables are not shared among processes on x86-PAE.  Therefore, any
update to sync'd pmd entries need re-syncing.  Freeing a pte page
also leads to a vmalloc fault and hits the BUG_ON in vmalloc_sync_one().

Disable free page handling on x86-PAE.  pud_free_pmd_page() and
pmd_free_pte_page() simply return 0 if a given pud/pmd entry is present.
This assures that ioremap() does not update sync'd pmd entries at the
cost of falling back to pte mappings.

Fixes: 28ee90fe ("x86/mm: implement free pmd/pte page interfaces")
Reported-by: NJoerg Roedel <joro@8bytes.org>
Signed-off-by: NToshi Kani <toshi.kani@hpe.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: mhocko@suse.com
Cc: akpm@linux-foundation.org
Cc: hpa@zytor.com
Cc: cpandya@codeaurora.org
Cc: linux-mm@kvack.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20180627141348.21777-2-toshi.kani@hpe.com

Currently machine_kexec() doesn't reset to EL2 in the case of a
crashdump kernel. This leaves potentially dodgy state active at EL2, and
means that if the crashdump kernel attempts to online secondary CPUs,
these will be booted as mismatched ELs.

Let's reset to EL2, as we do in all other cases, and simplify things. If
EL2 state is corrupt, things are already sufficiently bad that kdump is
unlikely to work, and it's best-effort regardless.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

I've got this infinite stacktrace when debugging another problem:
[  908.795225] INFO: rcu_preempt detected stalls on CPUs/tasks:
[  908.796176]  1-...!: (1 GPs behind) idle=952/1/4611686018427387904 softirq=1462/1462 fqs=355
[  908.797692]  2-...!: (1 GPs behind) idle=f42/1/4611686018427387904 softirq=1550/1551 fqs=355
[  908.799189]  (detected by 0, t=2109 jiffies, g=130, c=129, q=235)
[  908.800284] Task dump for CPU 1:
[  908.800871] kworker/1:1     R  running task        0    32      2 0x00000022
[  908.802127] Workqueue: writecache-writeabck writecache_writeback [dm_writecache]
[  908.820285] Call trace:
[  908.824785]  __switch_to+0x68/0x90
[  908.837661]  0xfffffe00603afd90
[  908.844119]  0xfffffe00603afd90
[  908.850091]  0xfffffe00603afd90
[  908.854285]  0xfffffe00603afd90
[  908.863538]  0xfffffe00603afd90
[  908.865523]  0xfffffe00603afd90

The machine just locked up and kept on printing the same line over and
over again. This patch fixes it.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: NPeng Donglin <dolinux.peng@gmail.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Pull btrfs fixes from David Sterba:
 "We have a few regression fixes for qgroup rescan status tracking and
  the vm_fault_t conversion that mixed up the error values"

* tag 'for-4.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: fix mount failure when qgroup rescan is in progress
  Btrfs: fix regression in btrfs_page_mkwrite() from vm_fault_t conversion
  btrfs: quota: Set rescan progress to (u64)-1 if we hit last leaf

Pull vfs fix from Al Viro:
 "Followup to procfs-seq_file series this window"

This fixes a memory leak by making sure that proc seq files release any
private data on close.  The 'proc_seq_open' has to be properly paired
with 'proc_seq_release' that releases the extra private data.

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  proc: add proc_seq_release

Pull staging/IIO fixes from Greg KH:
 "Here are a few small staging and IIO driver fixes for 4.18-rc3.

  Nothing major or big, all just fixes for reported problems since
  4.18-rc1. All of these have been in linux-next this week with no
  reported problems"

* tag 'staging-4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: android: ion: Return an ERR_PTR in ion_map_kernel
  staging: comedi: quatech_daqp_cs: fix no-op loop daqp_ao_insn_write()
  iio: imu: inv_mpu6050: Fix probe() failure on older ACPI based machines
  iio: buffer: fix the function signature to match implementation
  iio: mma8452: Fix ignoring MMA8452_INT_DRDY
  iio: tsl2x7x/tsl2772: avoid potential division by zero
  iio: pressure: bmp280: fix relative humidity unit

Pull tty/serial fixes from Greg KH:
 "Here are five fixes for the tty core and some serial drivers.

  The tty core ones fix some security and other issues reported by the
  syzbot that I have taken too long in responding to (sorry Tetsuo!).

  The 8350 serial driver fix resolves an issue of devices that used to
  work properly stopping working as they shouldn't have been added to a
  blacklist.

  All of these have been in linux-next for a few days with no reported
  issues"

* tag 'tty-4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vt: prevent leaking uninitialized data to userspace via /dev/vcs*
  serdev: fix memleak on module unload
  serial: 8250_pci: Remove stalled entries in blacklist
  n_tty: Access echo_* variables carefully.
  n_tty: Fix stall at n_tty_receive_char_special().

Pull USB fixes from Greg KH:
 "Here is a number of USB gadget and other driver fixes for 4.18-rc3.

  There's a bunch of them here, most of them being gadget driver and
  xhci host controller fixes for reported issues (as normal), but there
  are also some new device ids, and some fixes for the typec code.

  There is an acpi core patch in here that was acked by the acpi
  maintainer as it is needed for the typec fixes in order to properly
  solve a problem in that driver.

  All of these have been in linux-next this week with no reported
  issues"

* tag 'usb-4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
  usb: chipidea: host: fix disconnection detect issue
  usb: typec: tcpm: fix logbuffer index is wrong if _tcpm_log is re-entered
  typec: tcpm: Fix a msecs vs jiffies bug
  NFC: pn533: Fix wrong GFP flag usage
  usb: cdc_acm: Add quirk for Uniden UBC125 scanner
  staging/typec: fix tcpci_rt1711h build errors
  usb: typec: ucsi: Fix for incorrect status data issue
  usb: typec: ucsi: acpi: Workaround for cache mode issue
  acpi: Add helper for deactivating memory region
  usb: xhci: increase CRS timeout value
  usb: xhci: tegra: fix runtime PM error handling
  usb: xhci: remove the code build warning
  xhci: Fix kernel oops in trace_xhci_free_virt_device
  xhci: Fix perceived dead host due to runtime suspend race with event handler
  dwc2: gadget: Fix ISOC IN DDMA PID bitfield value calculation
  usb: gadget: dwc2: fix memory leak in gadget_init()
  usb: gadget: composite: fix delayed_status race condition when set_interface
  usb: dwc2: fix isoc split in transfer with no data
  usb: dwc2: alloc dma aligned buffer for isoc split in
  usb: dwc2: fix the incorrect bitmaps for the ports of multi_tt hub
  ...

Pull dma mapping fixlet from Christoph Hellwig:
 "Add a missing export required by riscv and unicore"

* tag 'dma-mapping-4.18-2' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: export swiotlb_dma_ops

Pull parisc fixes and cleanups from Helge Deller:
 "Nothing exiting in this patchset, just

   - small cleanups of header files

   - default to 4 CPUs when building a SMP kernel

   - mark 16kB and 64kB page sizes broken

   - addition of the new io_pgetevents syscall"

* 'parisc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Build kernel without -ffunction-sections
  parisc: Reduce debug output in unwind code
  parisc: Wire up io_pgetevents syscall
  parisc: Default to 4 SMP CPUs
  parisc: Convert printk(KERN_LEVEL) to pr_lvl()
  parisc: Mark 16kB and 64kB page sizes BROKEN
  parisc: Drop struct sigaction from not exported header file

Pull ARM SoC fixes from Olof Johansson:
 "A smaller batch for the end of the week (let's see if I can keep the
  weekly cadence going for once).

  All medium-grade fixes here, nothing worrisome:

   - Fixes for some fairly old bugs around SD card write-protect
     detection and GPIO interrupt assignments on Davinci.

   - Wifi module suspend fix for Hikey.

   - Minor DT tweaks to fix inaccuracies for Amlogic platforms, one
     of which solves booting with third-party u-boot"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: dts: hikey960: Define wl1837 power capabilities
  arm64: dts: hikey: Define wl1835 power capabilities
  ARM64: dts: meson-gxl: fix Mali GPU compatible string
  ARM64: dts: meson-axg: fix ethernet stability issue
  ARM64: dts: meson-gx: fix ATF reserved memory region
  ARM64: dts: meson-gxl-s905x-p212: Add phy-supply for usb0
  ARM64: dts: meson: fix register ranges for SD/eMMC
  ARM64: dts: meson: disable sd-uhs modes on the libretech-cc
  ARM: dts: da850: Fix interrups property for gpio
  ARM: davinci: board-da850-evm: fix WP pin polarity for MMC/SD

Merge tag 'kbuild-fixes-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - introduce __diag_* macros and suppress -Wattribute-alias warnings
   from GCC 8

 - fix stack protector test script for x86_64

 - fix line number handling in Kconfig

 - document that '#' starts a comment in Kconfig

 - handle P_SYMBOL property in dump debugging of Kconfig

 - correct help message of LD_DEAD_CODE_DATA_ELIMINATION

 - fix occasional segmentation faults in Kconfig

* tag 'kbuild-fixes-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: loop boundary condition fix
  kbuild: reword help of LD_DEAD_CODE_DATA_ELIMINATION
  kconfig: handle P_SYMBOL in print_symbol()
  kconfig: document Kconfig source file comments
  kconfig: fix line numbers for if-entries in menu tree
  stack-protector: Fix test with 32-bit userland and CONFIG_64BIT=y
  powerpc: Remove -Wattribute-alias pragmas
  disable -Wattribute-alias warning for SYSCALL_DEFINEx()
  kbuild: add macro for controlling warnings to linux/compiler.h

Pull x86 fixes from Ingo Molnar:
 "The biggest diffstat comes from self-test updates, plus there's entry
  code fixes, 5-level paging related fixes, console debug output fixes,
  and misc fixes"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Clean up the printk()s in show_fault_oops()
  x86/mm: Drop unneeded __always_inline for p4d page table helpers
  x86/efi: Fix efi_call_phys_epilog() with CONFIG_X86_5LEVEL=y
  selftests/x86/sigreturn: Do minor cleanups
  selftests/x86/sigreturn/64: Fix spurious failures on AMD CPUs
  x86/entry/64/compat: Fix "x86/entry/64/compat: Preserve r8-r11 in int $0x80"
  x86/mm: Don't free P4D table when it is folded at runtime
  x86/entry/32: Add explicit 'l' instruction suffix
  x86/mm: Get rid of KERN_CONT in show_fault_oops()

Pull perf fixes from Ingo Molnar:
 "Tooling fixes mostly, plus a build warning fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  perf/core: Move inline keyword at the beginning of declaration
  tools/headers: Pick up latest kernel ABIs
  perf tools: Fix crash caused by accessing feat_ops[HEADER_LAST_FEATURE]
  perf script: Fix crash because of missing evsel->priv
  perf script: Add missing output fields in a hint
  perf bench: Fix numa report output code
  perf stat: Remove duplicate event counting
  perf alias: Rebuild alias expression string to make it comparable
  perf alias: Remove trailing newline when reading sysfs files
  perf tools: Fix a clang 7.0 compilation error
  tools include uapi: Synchronize bpf.h with the kernel
  tools include uapi: Update if_link.h to pick IFLA_{BRPORT_ISOLATED,VXLAN_TTL_INHERIT}
  tools include powerpc: Update arch/powerpc/include/uapi/asm/unistd.h copy to get 'rseq' syscall
  perf tools: Update x86's syscall_64.tbl, adding 'io_pgetevents' and 'rseq'
  tools headers uapi: Synchronize drm/drm.h
  perf intel-pt: Fix packet decoding of CYC packets
  perf tests: Add valid callback for parse-events test
  perf tests: Add event parsing error handling to parse events test
  perf report powerpc: Fix crash if callchain is empty
  perf test session topology: Fix test on s390
  ...

Pull selinux fix from Paul Moore:
 "One fairly straightforward patch to fix a longstanding issue where a
  process could stall while accessing files in selinuxfs and block
  everyone else due to a held mutex.

  The patch passes all our tests and looks to apply cleanly to your
  current tree"

* tag 'selinux-pr-20180629' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: move user accesses in selinuxfs out of locked regions

Pull block fixes from Jens Axboe:
 "Small set of fixes for this series. Mostly just minor fixes, the only
  oddball in here is the sg change.

  The sg change came out of the stall fix for NVMe, where we added a
  mempool and limited us to a single page allocation. CONFIG_SG_DEBUG
  sort-of ruins that, since we'd need to account for that. That's
  actually a generic problem, since lots of drivers need to allocate SG
  lists. So this just removes support for CONFIG_SG_DEBUG, which I added
  back in 2007 and to my knowledge it was never useful.

  Anyway, outside of that, this pull contains:

   - clone of request with special payload fix (Bart)

   - drbd discard handling fix (Bart)

   - SATA blk-mq stall fix (me)

   - chunk size fix (Keith)

   - double free nvme rdma fix (Sagi)"

* tag 'for-linus-20180629' of git://git.kernel.dk/linux-block:
  sg: remove ->sg_magic member
  drbd: Fix drbd_request_prepare() discard handling
  blk-mq: don't queue more if we get a busy return
  block: Fix cloning of requests with a special payload
  nvme-rdma: fix possible double free of controller async event buffer
  block: Fix transfer when chunk sectors exceeds max

Pull powerpc fixes from Michael Ellerman:
 "Two regression fixes, and a new syscall wire-up:

   - A fix for the recent conversion to time64_t in the powermac RTC
     routines, which caused time to go backward.

   - Another fix for fallout from the split PMD PTL conversion.

   - Wire up the new io_pgetevents() syscall.

  Thanks to: Aneesh Kumar K.V, Arnd Bergmann, Breno Leitao, Mathieu
  Malaterre"

* tag 'powerpc-4.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/powermac: Fix rtc read/write functions
  powerpc/mm/32: Fix pgtable_page_dtor call
  powerpc: Wire up io_pgetevents

Merge tag 'davinci-fixes-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes

This fixes polarity of SD card write-protect pin on DA850 EVM
and fixes interrupt property for DA850 SoC GPIO as defined in
device-tree.

Both of these are not introduced with v4.18 merge but have
existed prior.

* tag 'davinci-fixes-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: dts: da850: Fix interrups property for gpio
  ARM: davinci: board-da850-evm: fix WP pin polarity for MMC/SD
Signed-off-by: NOlof Johansson <olof@lixom.net>