Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 165
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 29 4月, 2018 4 次提交
  3. 27 4月, 2018 1 次提交
    • W
      selftests/bpf: bpf tunnel test. · 933a741e
      由 William Tu 提交于 
      The patch migrates the original tests at samples/bpf/tcbpf2_kern.c
and samples/bpf/test_tunnel_bpf.sh to selftests.  There are a couple
changes from the original:
    1) add ipv6 vxlan, ipv6 geneve, ipv6 ipip tests
    2) simplify the original ipip tests (remove iperf tests)
    3) improve documentation
    4) use bpf_ntoh* and bpf_hton* api

In summary, 'test_tunnel_kern.o' contains the following bpf program:
  GRE: gre_set_tunnel, gre_get_tunnel
  IP6GRE: ip6gretap_set_tunnel, ip6gretap_get_tunnel
  ERSPAN: erspan_set_tunnel, erspan_get_tunnel
  IP6ERSPAN: ip4ip6erspan_set_tunnel, ip4ip6erspan_get_tunnel
  VXLAN: vxlan_set_tunnel, vxlan_get_tunnel
  IP6VXLAN: ip6vxlan_set_tunnel, ip6vxlan_get_tunnel
  GENEVE: geneve_set_tunnel, geneve_get_tunnel
  IP6GENEVE: ip6geneve_set_tunnel, ip6geneve_get_tunnel
  IPIP: ipip_set_tunnel, ipip_get_tunnel
  IP6IP: ipip6_set_tunnel, ipip6_get_tunnel,
         ip6ip6_set_tunnel, ip6ip6_get_tunnel
  XFRM: xfrm_get_state
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
      933a741e
  5. 25 4月, 2018 6 次提交
  7. 20 4月, 2018 1 次提交
    • M
      bpf: btf: Add BTF tests · c0fa1b6c
      由 Martin KaFai Lau 提交于 
      This patch tests the BTF loading, map_create with BTF
and the changes in libbpf.

-r: Raw tests that test raw crafted BTF data
-f: Test LLVM compiled bpf prog with BTF data
-g: Test BPF_OBJ_GET_INFO_BY_FD for btf_fd
-p: Test pretty print

The tools/testing/selftests/bpf/Makefile will probe
for BTF support in llc and pahole before generating
debug info (-g) and convert them to BTF.  You can supply
the BTF supported binary through the following make variables:
LLC, BTF_PAHOLE and LLVM_OBJCOPY.

LLC: The lastest llc with -mattr=dwarfris support for the bpf target.
     It is only in the master of the llvm repo for now.
BTF_PAHOLE: The modified pahole with BTF support:
	    https://github.com/iamkafai/pahole/tree/btf
	    To add a BTF section: "pahole -J bpf_prog.o"
LLVM_OBJCOPY: Any llvm-objcopy should do
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Acked-by: NAlexei Starovoitov <ast@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
      c0fa1b6c
  9. 19 4月, 2018 3 次提交
    • Y
      tools/bpf: fix test_sock and test_sock_addr.sh failure · 0a0a7e00
      由 Yonghong Song 提交于 
      The bpf selftests test_sock and test_sock_addr.sh failed
in my test machine. The failure looks like:
    $ ./test_sock
    Test case: bind4 load with invalid access: src_ip6 .. [PASS]
    Test case: bind4 load with invalid access: mark .. [PASS]
    Test case: bind6 load with invalid access: src_ip4 .. [PASS]
    Test case: sock_create load with invalid access: src_port .. [PASS]
    Test case: sock_create load w/o expected_attach_type (compat mode) .. [FAIL]
    Test case: sock_create load w/ expected_attach_type .. [FAIL]
    Test case: attach type mismatch bind4 vs bind6 .. [FAIL]
    ...
    Summary: 4 PASSED, 12 FAILED
    $ ./test_sock_addr.sh
    Wait for testing IPv4/IPv6 to become available .....
    ERROR: Timeout waiting for test IP to become available.

In test_sock, bpf program loads failed due to hitting memlock limits.
In test_sock_addr.sh, my test machine is a ipv6 only test box and using
"ping" without specifying address family for an ipv6 address does not work.

This patch fixed the issue by including header bpf_rlimit.h in test_sock.c
and test_sock_addr.c, and specifying address family for ping command.

Cc: Andrey Ignatov <rdna@fb.com>
Signed-off-by: NYonghong Song <yhs@fb.com>
Acked-by: NAndrey Ignatov <rdna@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
      0a0a7e00
    • N
      bpf: add bpf_xdp_adjust_tail sample prog · c6ffd1ff
      由 Nikita V. Shirokov 提交于 
      adding bpf's sample program which is using bpf_xdp_adjust_tail helper
by generating ICMPv4 "packet to big" message if ingress packet's size is
bigger then 600 bytes
Signed-off-by: NNikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
      c6ffd1ff
    • N
      bpf: adding tests for bpf_xdp_adjust_tail · 0367d0a2
      由 Nikita V. Shirokov 提交于 
      adding selftests for bpf_xdp_adjust_tail helper. in this synthetic test
we are testing that 1) if data_end < data helper will return EINVAL
2) for normal use case packet's length would be reduced.
Signed-off-by: NNikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
      0367d0a2
  11. 11 4月, 2018 1 次提交
  13. 31 3月, 2018 3 次提交
    • A
      selftests/bpf: Selftest for sys_bind post-hooks. · 1d436885
      由 Andrey Ignatov 提交于 
      Add selftest for attach types `BPF_CGROUP_INET4_POST_BIND` and
`BPF_CGROUP_INET6_POST_BIND`.

The main things tested are:
* prog load behaves as expected (valid/invalid accesses in prog);
* prog attach behaves as expected (load- vs attach-time attach types);
* `BPF_CGROUP_INET_SOCK_CREATE` can be attached in a backward compatible
  way;
* post-hooks return expected result and errno.

Example:
  # ./test_sock
  Test case: bind4 load with invalid access: src_ip6 .. [PASS]
  Test case: bind4 load with invalid access: mark .. [PASS]
  Test case: bind6 load with invalid access: src_ip4 .. [PASS]
  Test case: sock_create load with invalid access: src_port .. [PASS]
  Test case: sock_create load w/o expected_attach_type (compat mode) ..
  [PASS]
  Test case: sock_create load w/ expected_attach_type .. [PASS]
  Test case: attach type mismatch bind4 vs bind6 .. [PASS]
  Test case: attach type mismatch bind6 vs bind4 .. [PASS]
  Test case: attach type mismatch default vs bind4 .. [PASS]
  Test case: attach type mismatch bind6 vs sock_create .. [PASS]
  Test case: bind4 reject all .. [PASS]
  Test case: bind6 reject all .. [PASS]
  Test case: bind6 deny specific IP & port .. [PASS]
  Test case: bind4 allow specific IP & port .. [PASS]
  Test case: bind4 allow all .. [PASS]
  Test case: bind6 allow all .. [PASS]
  Summary: 16 PASSED, 0 FAILED
Signed-off-by: NAndrey Ignatov <rdna@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
      1d436885
    • A
      selftests/bpf: Selftest for sys_connect hooks · 622adafb
      由 Andrey Ignatov 提交于 
      Add selftest for BPF_CGROUP_INET4_CONNECT and BPF_CGROUP_INET6_CONNECT
attach types.

Try to connect(2) to specified IP:port and test that:
* remote IP:port pair is overridden;
* local end of connection is bound to specified IP.

All combinations of IPv4/IPv6 and TCP/UDP are tested.

Example:
  # tcpdump -pn -i lo -w connect.pcap 2>/dev/null &
  [1] 478
  # strace -qqf -e connect -o connect.trace ./test_sock_addr.sh
  Wait for testing IPv4/IPv6 to become available ... OK
  Load bind4 with invalid type (can pollute stderr) ... REJECTED
  Load bind4 with valid type ... OK
  Attach bind4 with invalid type ... REJECTED
  Attach bind4 with valid type ... OK
  Load connect4 with invalid type (can pollute stderr) libbpf: load bpf \
    program failed: Permission denied
  libbpf: -- BEGIN DUMP LOG ---
  libbpf:
  0: (b7) r2 = 23569
  1: (63) *(u32 *)(r1 +24) = r2
  2: (b7) r2 = 16777343
  3: (63) *(u32 *)(r1 +4) = r2
  invalid bpf_context access off=4 size=4
  [ 1518.404609] random: crng init done

  libbpf: -- END LOG --
  libbpf: failed to load program 'cgroup/connect4'
  libbpf: failed to load object './connect4_prog.o'
  ... REJECTED
  Load connect4 with valid type ... OK
  Attach connect4 with invalid type ... REJECTED
  Attach connect4 with valid type ... OK
  Test case #1 (IPv4/TCP):
          Requested: bind(192.168.1.254, 4040) ..
             Actual: bind(127.0.0.1, 4444)
          Requested: connect(192.168.1.254, 4040) from (*, *) ..
             Actual: connect(127.0.0.1, 4444) from (127.0.0.4, 56068)
  Test case #2 (IPv4/UDP):
          Requested: bind(192.168.1.254, 4040) ..
             Actual: bind(127.0.0.1, 4444)
          Requested: connect(192.168.1.254, 4040) from (*, *) ..
             Actual: connect(127.0.0.1, 4444) from (127.0.0.4, 56447)
  Load bind6 with invalid type (can pollute stderr) ... REJECTED
  Load bind6 with valid type ... OK
  Attach bind6 with invalid type ... REJECTED
  Attach bind6 with valid type ... OK
  Load connect6 with invalid type (can pollute stderr) libbpf: load bpf \
    program failed: Permission denied
  libbpf: -- BEGIN DUMP LOG ---
  libbpf:
  0: (b7) r6 = 0
  1: (63) *(u32 *)(r1 +12) = r6
  invalid bpf_context access off=12 size=4

  libbpf: -- END LOG --
  libbpf: failed to load program 'cgroup/connect6'
  libbpf: failed to load object './connect6_prog.o'
  ... REJECTED
  Load connect6 with valid type ... OK
  Attach connect6 with invalid type ... REJECTED
  Attach connect6 with valid type ... OK
  Test case #3 (IPv6/TCP):
          Requested: bind(face:b00c:1234:5678::abcd, 6060) ..
             Actual: bind(::1, 6666)
          Requested: connect(face:b00c:1234:5678::abcd, 6060) from (*, *)
             Actual: connect(::1, 6666) from (::6, 37458)
  Test case #4 (IPv6/UDP):
          Requested: bind(face:b00c:1234:5678::abcd, 6060) ..
             Actual: bind(::1, 6666)
          Requested: connect(face:b00c:1234:5678::abcd, 6060) from (*, *)
             Actual: connect(::1, 6666) from (::6, 39315)
  ### SUCCESS
  # egrep 'connect\(.*AF_INET' connect.trace | \
  > egrep -vw 'htons\(1025\)' | fold -b -s -w 72
  502   connect(7, {sa_family=AF_INET, sin_port=htons(4040),
  sin_addr=inet_addr("192.168.1.254")}, 128) = 0
  502   connect(8, {sa_family=AF_INET, sin_port=htons(4040),
  sin_addr=inet_addr("192.168.1.254")}, 128) = 0
  502   connect(9, {sa_family=AF_INET6, sin6_port=htons(6060),
  inet_pton(AF_INET6, "face:b00c:1234:5678::abcd", &sin6_addr),
  sin6_flowinfo=0, sin6_scope_id=0}, 128) = 0
  502   connect(10, {sa_family=AF_INET6, sin6_port=htons(6060),
  inet_pton(AF_INET6, "face:b00c:1234:5678::abcd", &sin6_addr),
  sin6_flowinfo=0, sin6_scope_id=0}, 128) = 0
  # fg
  tcpdump -pn -i lo -w connect.pcap 2> /dev/null
  # tcpdump -r connect.pcap -n tcp | cut -c 1-72
  reading from file connect.pcap, link-type EN10MB (Ethernet)
  17:57:40.383533 IP 127.0.0.4.56068 > 127.0.0.1.4444: Flags [S], seq 1333
  17:57:40.383566 IP 127.0.0.1.4444 > 127.0.0.4.56068: Flags [S.], seq 112
  17:57:40.383589 IP 127.0.0.4.56068 > 127.0.0.1.4444: Flags [.], ack 1, w
  17:57:40.384578 IP 127.0.0.1.4444 > 127.0.0.4.56068: Flags [R.], seq 1,
  17:57:40.403327 IP6 ::6.37458 > ::1.6666: Flags [S], seq 406513443, win
  17:57:40.403357 IP6 ::1.6666 > ::6.37458: Flags [S.], seq 2448389240, ac
  17:57:40.403376 IP6 ::6.37458 > ::1.6666: Flags [.], ack 1, win 342, opt
  17:57:40.404263 IP6 ::1.6666 > ::6.37458: Flags [R.], seq 1, ack 1, win
Signed-off-by: NAndrey Ignatov <rdna@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
      622adafb
    • A
      selftests/bpf: Selftest for sys_bind hooks · e50b0a6f
      由 Andrey Ignatov 提交于 
      Add selftest to work with bpf_sock_addr context from
`BPF_PROG_TYPE_CGROUP_SOCK_ADDR` programs.

Try to bind(2) on IP:port and apply:
* loads to make sure context can be read correctly, including narrow
  loads (byte, half) for IP and full-size loads (word) for all fields;
* stores to those fields allowed by verifier.

All combination from IPv4/IPv6 and TCP/UDP are tested.

Both scenarios are tested:
* valid programs can be loaded and attached;
* invalid programs can be neither loaded nor attached.

Test passes when expected data can be read from context in the
BPF-program, and after the call to bind(2) socket is bound to IP:port
pair that was written by BPF-program to the context.

Example:
  # ./test_sock_addr
  Attached bind4 program.
  Test case #1 (IPv4/TCP):
          Requested: bind(192.168.1.254, 4040) ..
             Actual: bind(127.0.0.1, 4444)
  Test case #2 (IPv4/UDP):
          Requested: bind(192.168.1.254, 4040) ..
             Actual: bind(127.0.0.1, 4444)
  Attached bind6 program.
  Test case #3 (IPv6/TCP):
          Requested: bind(face:b00c:1234:5678::abcd, 6060) ..
             Actual: bind(::1, 6666)
  Test case #4 (IPv6/UDP):
          Requested: bind(face:b00c:1234:5678::abcd, 6060) ..
             Actual: bind(::1, 6666)
  ### SUCCESS
Signed-off-by: NAndrey Ignatov <rdna@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
      e50b0a6f
  15. 29 3月, 2018 1 次提交
  17. 20 3月, 2018 6 次提交
  19. 15 3月, 2018 1 次提交
  21. 27 2月, 2018 2 次提交
  23. 24 2月, 2018 2 次提交
    • D
      bpf: add various jit test cases · 23d191a8
      由 Daniel Borkmann 提交于 
      Add few test cases that check the rnu-time results under JIT.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
      23d191a8
    • D
      bpf: allow xadd only on aligned memory · ca369602
      由 Daniel Borkmann 提交于 
      The requirements around atomic_add() / atomic64_add() resp. their
JIT implementations differ across architectures. E.g. while x86_64
seems just fine with BPF's xadd on unaligned memory, on arm64 it
triggers via interpreter but also JIT the following crash:

  [  830.864985] Unable to handle kernel paging request at virtual address ffff8097d7ed6703
  [...]
  [  830.916161] Internal error: Oops: 96000021 [#1] SMP
  [  830.984755] CPU: 37 PID: 2788 Comm: test_verifier Not tainted 4.16.0-rc2+ #8
  [  830.991790] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.29 07/17/2017
  [  830.998998] pstate: 80400005 (Nzcv daif +PAN -UAO)
  [  831.003793] pc : __ll_sc_atomic_add+0x4/0x18
  [  831.008055] lr : ___bpf_prog_run+0x1198/0x1588
  [  831.012485] sp : ffff00001ccabc20
  [  831.015786] x29: ffff00001ccabc20 x28: ffff8017d56a0f00
  [  831.021087] x27: 0000000000000001 x26: 0000000000000000
  [  831.026387] x25: 000000c168d9db98 x24: 0000000000000000
  [  831.031686] x23: ffff000008203878 x22: ffff000009488000
  [  831.036986] x21: ffff000008b14e28 x20: ffff00001ccabcb0
  [  831.042286] x19: ffff0000097b5080 x18: 0000000000000a03
  [  831.047585] x17: 0000000000000000 x16: 0000000000000000
  [  831.052885] x15: 0000ffffaeca8000 x14: 0000000000000000
  [  831.058184] x13: 0000000000000000 x12: 0000000000000000
  [  831.063484] x11: 0000000000000001 x10: 0000000000000000
  [  831.068783] x9 : 0000000000000000 x8 : 0000000000000000
  [  831.074083] x7 : 0000000000000000 x6 : 000580d428000000
  [  831.079383] x5 : 0000000000000018 x4 : 0000000000000000
  [  831.084682] x3 : ffff00001ccabcb0 x2 : 0000000000000001
  [  831.089982] x1 : ffff8097d7ed6703 x0 : 0000000000000001
  [  831.095282] Process test_verifier (pid: 2788, stack limit = 0x0000000018370044)
  [  831.102577] Call trace:
  [  831.105012]  __ll_sc_atomic_add+0x4/0x18
  [  831.108923]  __bpf_prog_run32+0x4c/0x70
  [  831.112748]  bpf_test_run+0x78/0xf8
  [  831.116224]  bpf_prog_test_run_xdp+0xb4/0x120
  [  831.120567]  SyS_bpf+0x77c/0x1110
  [  831.123873]  el0_svc_naked+0x30/0x34
  [  831.127437] Code: 97fffe97 17ffffec 00000000 f9800031 (885f7c31)

Reason for this is because memory is required to be aligned. In
case of BPF, we always enforce alignment in terms of stack access,
but not when accessing map values or packet data when the underlying
arch (e.g. arm64) has CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS set.

xadd on packet data that is local to us anyway is just wrong, so
forbid this case entirely. The only place where xadd makes sense in
fact are map values; xadd on stack is wrong as well, but it's been
around for much longer. Specifically enforce strict alignment in case
of xadd, so that we handle this case generically and avoid such crashes
in the first place.

Fixes: 17a52670 ("bpf: verifier (add verifier core)")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
      ca369602
  25. 23 2月, 2018 1 次提交
    • D
      bpf, arm64: fix out of bounds access in tail call · 16338a9b
      由 Daniel Borkmann 提交于 
      I recently noticed a crash on arm64 when feeding a bogus index
into BPF tail call helper. The crash would not occur when the
interpreter is used, but only in case of JIT. Output looks as
follows:

  [  347.007486] Unable to handle kernel paging request at virtual address fffb850e96492510
  [...]
  [  347.043065] [fffb850e96492510] address between user and kernel address ranges
  [  347.050205] Internal error: Oops: 96000004 [#1] SMP
  [...]
  [  347.190829] x13: 0000000000000000 x12: 0000000000000000
  [  347.196128] x11: fffc047ebe782800 x10: ffff808fd7d0fd10
  [  347.201427] x9 : 0000000000000000 x8 : 0000000000000000
  [  347.206726] x7 : 0000000000000000 x6 : 001c991738000000
  [  347.212025] x5 : 0000000000000018 x4 : 000000000000ba5a
  [  347.217325] x3 : 00000000000329c4 x2 : ffff808fd7cf0500
  [  347.222625] x1 : ffff808fd7d0fc00 x0 : ffff808fd7cf0500
  [  347.227926] Process test_verifier (pid: 4548, stack limit = 0x000000007467fa61)
  [  347.235221] Call trace:
  [  347.237656]  0xffff000002f3a4fc
  [  347.240784]  bpf_test_run+0x78/0xf8
  [  347.244260]  bpf_prog_test_run_skb+0x148/0x230
  [  347.248694]  SyS_bpf+0x77c/0x1110
  [  347.251999]  el0_svc_naked+0x30/0x34
  [  347.255564] Code: 9100075a d280220a 8b0a002a d37df04b (f86b694b)
  [...]

In this case the index used in BPF r3 is the same as in r1
at the time of the call, meaning we fed a pointer as index;
here, it had the value 0xffff808fd7cf0500 which sits in x2.

While I found tail calls to be working in general (also for
hitting the error cases), I noticed the following in the code
emission:

  # bpftool p d j i 988
  [...]
  38:   ldr     w10, [x1,x10]
  3c:   cmp     w2, w10
  40:   b.ge    0x000000000000007c              <-- signed cmp
  44:   mov     x10, #0x20                      // #32
  48:   cmp     x26, x10
  4c:   b.gt    0x000000000000007c
  50:   add     x26, x26, #0x1
  54:   mov     x10, #0x110                     // #272
  58:   add     x10, x1, x10
  5c:   lsl     x11, x2, #3
  60:   ldr     x11, [x10,x11]                  <-- faulting insn (f86b694b)
  64:   cbz     x11, 0x000000000000007c
  [...]

Meaning, the tests passed because commit ddb55992 ("arm64:
bpf: implement bpf_tail_call() helper") was using signed compares
instead of unsigned which as a result had the test wrongly passing.

Change this but also the tail call count test both into unsigned
and cap the index as u32. Latter we did as well in 90caccdd
("bpf: fix bpf_tail_call() x64 JIT") and is needed in addition here,
too. Tested on HiSilicon Hi1616.

Result after patch:

  # bpftool p d j i 268
  [...]
  38:	ldr	w10, [x1,x10]
  3c:	add	w2, w2, #0x0
  40:	cmp	w2, w10
  44:	b.cs	0x0000000000000080
  48:	mov	x10, #0x20                  	// #32
  4c:	cmp	x26, x10
  50:	b.hi	0x0000000000000080
  54:	add	x26, x26, #0x1
  58:	mov	x10, #0x110                 	// #272
  5c:	add	x10, x1, x10
  60:	lsl	x11, x2, #3
  64:	ldr	x11, [x10,x11]
  68:	cbz	x11, 0x0000000000000080
  [...]

Fixes: ddb55992 ("arm64: bpf: implement bpf_tail_call() helper")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
      16338a9b
  27. 22 2月, 2018 3 次提交
  29. 15 2月, 2018 3 次提交
  31. 14 2月, 2018 2 次提交
    • Y
      tools/bpf: adjust rlimit RLIMIT_MEMLOCK for test_tcpbpf_user · 615a9474
      由 Yonghong Song 提交于 
      The default rlimit RLIMIT_MEMLOCK is 64KB. In certain cases,
e.g. in a test machine mimicking our production system, this test may
fail due to unable to charge the required memory for map creation:
   # ./test_tcpbpf_user
   libbpf: failed to create map (name: 'global_map'): Operation not permitted
   libbpf: failed to load object 'test_tcpbpf_kern.o'
   FAILED: load_bpf_file failed for: test_tcpbpf_kern.o

Changing the default rlimit RLIMIT_MEMLOCK to unlimited makes
the test always pass.
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
      615a9474
    • J
      selftests/bpf: fix Makefile for cgroup_helpers.c · 41757dcb
      由 Jesper Dangaard Brouer 提交于 
      The current selftests Makefile construct result in cgroup_helpers.c
gets compiled together with all the TEST_GEN_PROGS. And it also result
in invoking the libbpf Makefile two times (tools/lib/bpf).

These issues were introduced in commit 9d1f1594 ("bpf: move
cgroup_helpers from samples/bpf/ to tools/testing/selftesting/bpf/").

The only test program that requires the cgroup helpers is 'test_dev_cgroup'.

Thus, create a make target $(OUTPUT)/test_dev_cgroup that extend[1]
the 'prerequisite' for the 'stem' %-style pattern in ../lib.mk,
for this particular test program.

Reviewers notice the make-rules in tools/testing/selftests/lib.mk
differ from the normal kernel kbuild rules, and it is practical
to use 'make -p' to follow how these 'Implicit/static pattern stem'
gets expanded.

[1] https://www.gnu.org/software/make/manual/html_node/Static-Usage.html

Fixes: 9d1f1594 ("bpf: move cgroup_helpers from samples/bpf/ to tools/testing/selftesting/bpf/")
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
      41757dcb