- 14 5月, 2017 1 次提交
-
-
由 Kever Yang 提交于
Firefly-rk3399 is a bord from T-Firefly, you can find detail about it here: http://en.t-firefly.com/en/firenow/Firefly_RK3399/ This patch add basic node for the board and make it able to bring up. Peripheral works: - usb hub which connect to ehci controller; - UART2 debug - eMMC - PCIe Not work: - USB 3.0 HOST, type-C port - sdio, sd-card Not test for other peripheral: - HDMI - Ethernet - OPTICAL - WiFi/BT - MIPI CSI/DSI - IR - EDP/DP Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
- 05 4月, 2017 1 次提交
-
-
由 Liang Chen 提交于
This patch add rk3328-evb.dts for RK3328 evaluation board. Tested on RK3328 evb. Signed-off-by: NLiang Chen <cl@rock-chips.com> Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
- 22 3月, 2017 1 次提交
-
-
由 Brian Norris 提交于
Kevin is part of a family of boards called Gru. As best as possible, the properties shared by the Gru family are placed in rk3399-gru.dtsi, while Kevin-specific bits are in rk3399-gru-kevin.dts. This does not add full support for the base Gru board. Working and tested (to some extent): * EC support -- including keyboard, battery, PWM, and probably more * UART / console * Thermal * Touchscreen * Touchpad * Digitizer (regulator still WIP) * PCIe / Wifi * Bluetooth / Webcam * SD card * eMMC * USB2 on TypeC - This works much of the time, but USB3 devices may or may not detect properly. Waiting on proper extcon support for USB3 over TypeC. - Depends on XHCI/DWC3 fixes for ARM64 that still haven't landed * Backlight Not working: * CPUFreq -- relies on special OVP support for our PWM regulator circuits * EC / extcon support -- and with it, USB3/TypeC/DP * DRM -- won't even build on ARM64, so all display, eDP, etc. is not enabled Not tested: * Audio Signed-off-by: NBrian Norris <briannorris@chromium.org> [shared gru/kevin parts on a gru device] Tested-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com> [with a bit of reordering] Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
- 16 10月, 2016 1 次提交
-
-
由 Andy Yan 提交于
PX5 EVB is designed by Rockchip for automotive field with integrated CVBS (TP2825) / MIPI DSI / CSI / LVDS HDMI video input/output interface, audio codec ES8396, WIFI/BT (on RTL8723BS), Gsensor BMA250E and light&proximity sensor STK3410. Signed-off-by: NAndy Yan <andy.yan@rock-chips.com> Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
- 08 8月, 2016 1 次提交
-
-
由 Matthias Brugger 提交于
This patch adds basic support for the Tronsmart orion r86 set-top-box. Signed-off-by: NMatthias Brugger <mbrugger@suse.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
- 29 4月, 2016 1 次提交
-
-
由 Jianqun Xu 提交于
This patch add rk3399-evb.dts for RK3399 evaluation board. Tested on RK3399 evb. Signed-off-by: NJianqun Xu <jay.xu@rock-chips.com> Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
- 01 4月, 2016 1 次提交
-
-
由 Andreas Färber 提交于
The GeekBox contains an MXM3 module with a Rockchip RK3368 SoC. Some connectors are available directly on the module. This adds initial support, namely serial, USB, GMAC, eMMC, IR and TSADC. Signed-off-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
- 02 12月, 2015 1 次提交
-
-
由 Caesar Wang 提交于
This board is similar with the rk3288 evb board but the rk3368 top board. There exist the act8846 as the pmic. Moment, add the balight/thermal/emmc/usb.. stuff, Let the board can happy work. Signed-off-by: NCaesar Wang <wxt@rock-chips.com> Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
- 18 7月, 2015 1 次提交
-
-
由 Heiko Stübner 提交于
In terms of peripherals the rk3368 is quite similar to the rk3288, which makes it possible to have a lot basic components working in the first go. More to follow once I tracked down all the tiny differences that still exist in some parts. With these dts files, the R88 board is able to boot from an attached usb device and most likely from its emmc too, if the emmc uses a standard partition table instead of Rockchip's own one - the emmc itself is detected correctly. Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 22 10月, 2014 1 次提交
-
-
由 Robert Richter 提交于
Moving dts files to vendor subdirs. Acked-by: NRob Herring <robh@kernel.org> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRobert Richter <rrichter@cavium.com>
-