This implements optional MSI-X support in virtio_pci.
MSI-X is used whenever the host supports at least 2 MSI-X
vectors: 1 for configuration changes and 1 for virtqueues.
Per-virtqueue vectors are allocated if enough vectors
available.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (+ whitespace, style)

This reorganizes virtio-pci code in vp_interrupt slightly, so that
it's easier to add per-vq MSI support on top.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

This replaces find_vq/del_vq with find_vqs/del_vqs virtio operations,
and updates all drivers. This is needed for MSI support, because MSI
needs to know the total number of vectors upfront.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (+ lguest/9p compile fixes)

Add a linked list of all virtqueues for a virtio device: this helps for
debugging and is also needed for upcoming interface change.

Also, add a "name" field for clearer debug messages.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

The host really shouldn't be notifying us of config changes
before the device status is VIRTIO_CONFIG_S_DRIVER or
VIRTIO_CONFIG_S_DRIVER_OK.

However, if we do happen to be interrupted while we're not
attached to a driver, we really shouldn't oops. Prevent
this simply by checking that device->driver is non-NULL
before trying to notify the driver of config changes.

Problem observed by doing a "set_link virtio.0 down" with
QEMU before the net driver had been loaded.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We shouldn't be statically allocating the root device object,
so dynamically allocate it using root_device_register()
instead.

Also avoids this warning from 'rmmod virtio_pci':

  Device 'virtio-pci' does not have a release() function, it is broken and must be fixed
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add a release() function for virtio_pci devices so as to avoid:

  Device 'virtio0' does not have a release() function, it is broken and must be fixed

Move the code to free the resources associated with the device
from virtio_pci_remove() into this new function. virtio_pci_remove()
now merely unregisters the device which should cause the final
ref to be dropped and virtio_pci_release_dev() to be called.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Reported-by: NMichael Tokarev <mjt@tls.msk.ru>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

This allows each virtio user to hand in the alignment appropriate to
their virtio_ring structures.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>

That doesn't work for non-4k guests which are now appearing.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

The virtio PCI devices don't depend on the guest page size.  This matters
now PowerPC virtio is gaining ground (they like 64k pages).
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

This patch is part of a larger patch series which will remove
the "char bus_id[20]" name string from struct device. The device
name is managed in the kobject anyway, and without any size
limitation, and just needlessly copied into "struct device".

To set and read the device name dev_name(dev) and dev_set_name(dev)
must be used. If your code uses static kobjects, which it shouldn't
do, "const char *init_name" can be used to statically provide the
name the registered device should have. At registration time, the
init_name field is cleared, to enforce the use of dev_name(dev) to
access the device name at a later time.

We need to get rid of all occurrences of bus_id in the entire tree
to be able to enable the new interface. Please apply this patch,
and possibly convert any remaining remaining occurrences of bus_id.

We want to submit a patch to -next, which will remove bus_id from
"struct device", to find the remaining pieces to convert, and finally
switch over to the new api, which will remove the 20 bytes array
and does no longer have a size limitation.
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

kzalloc() does not guarantee page alignment, and in fact this broke when
I enabled CONFIG_SLUB_DEBUG_ON.

(Thanks to Anthony Liguori for spotting the missing kfree sub)
Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (fixed kfree)
Tested-by: NAnthony Liguori <aliguori@us.ibm.com>

To prepare for virtio_ring transport feature bits, hook in a call in
all the users to manipulate them.  This currently just clears all the
bits, since it doesn't understand any features.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Rather than explicitly handing the features to the lower-level, we just
hand the virtio_device and have it set the features.  This make it clear
that it has the chance to manipulate the features of the device at this
point (and that all feature negotiation is already done).
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Anthony Liguori points out that three different transports use the virtio code,
but each one keeps its own counter to set the virtio_device's index field.  In
theory (though not in current practice) this means that names could be
duplicated, and that risk grows as more transports are created.

So we move the selection of the unique virtio_device.index into the common code
in virtio.c, which has the side-benefit of removing duplicate code.

The only complexity is that lguest and S/390 use the index to uniquely identify
the device in case of catastrophic failure before register_virtio_device() is
called: now we use the offset within the descriptor page as a unique identifier
for the printks.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chris Lalancette <clalance@redhat.com>
Cc: Anthony Liguori <anthony@codemonkey.ws>

The common virtio code sets the bus_id, overriding anything virtio_pci
sets anyway.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chris Lalancette <clalance@redhat.com>
Cc: Anthony Liguori <anthony@codemonkey.ws>

A recent proposed feature addition to the virtio block driver revealed
some flaws in the API: in particular, we assume that feature
negotiation is complete once a driver's probe function returns.

There is nothing in the API to require this, however, and even I
didn't notice when it was violated.

So instead, we require the driver to specify what features it supports
in a table, we can then move the feature negotiation into the virtio
core.  The intersection of device and driver features are presented in
a new 'features' bitmap in the struct virtio_device.

Note that this highlights the difference between Linux unsigned-long
bitmaps where each unsigned long is in native endian, and a
straight-forward little-endian array of bytes.

Drivers can still remove feature bits in their probe routine if they
really have to.

API changes:
- dev->config->feature() no longer gets and acks a feature.
- drivers should advertise their features in the 'feature_table' field
- use virtio_has_feature() for extra sanity when checking feature bits
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

drivers/virtio/virtio_pci.c:148:2: warning: returning void-valued expression
drivers/virtio/virtio_pci.c:155:2: warning: returning void-valued expression
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make sure to call unregister_virtio_device() when a virtio device is removed.
Otherwise, virtio_pci.ko cannot be rmmod'd.

This was spotted by Marcelo Tosatti.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

virtio-pci acquires its spin lock in an interrupt context so it's necessary
to use spin_lock_irqsave/restore variants.  This patch fixes guest SMP when
using virtio devices in KVM.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

As Avi pointed out, as we continue to massage the virtio PCI ABI, we can make
things a little more friendly to users by utilizing the PCI revision field to
indicate which version of the ABI we're using.  This is a hard ABI version
and incrementing it will cause the guest driver to break.

This is the necessary changes to virtio_pci to support this.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

This is a PCI device that implements a transport for virtio.  It allows virtio
devices to be used by QEMU based VMMs like KVM or Xen.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>