fcebe456 cut and pasted some code to a later point
in create_pending_snapshot(), but didn't switch
to the appropriate error handling for this stage
of the function.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NChris Mason <clm@fb.com>

If this condition in end_extent_writepage() is false:

	if (tree->ops && tree->ops->writepage_end_io_hook)

we will then test an uninitialized "ret" at:

	ret = ret < 0 ? ret : -EIO;

The test for ret is for the case where ->writepage_end_io_hook
failed, and we'd choose that ret as the error; but if
there is no ->writepage_end_io_hook, nothing sets ret.

Initializing ret to 0 should be sufficient; if
writepage_end_io_hook wasn't set, (!uptodate) means
non-zero err was passed in, so we choose -EIO in that case.
Signed-of-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NChris Mason <clm@fb.com>

If tmp = ulist_alloc(GFP_NOFS) fails, we return without
freeing the previously allocated qgroups = ulist_alloc(GFP_NOFS)
and cause a memory leak.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NChris Mason <clm@fb.com>

Often when running the qgroups sanity test, a crash or a hang happened.
This is because the extent buffer the test uses for the root node doesn't
have an header level explicitly set, making it have a random level value.
This is a problem when it's not zero for the btrfs_search_slot() calls
the test ends up doing, resulting in crashes or hangs such as the following:

[ 6454.127192] Btrfs loaded, debug=on, assert=on, integrity-checker=on
(...)
[ 6454.127760] BTRFS: selftest: Running qgroup tests
[ 6454.127964] BTRFS: selftest: Running test_test_no_shared_qgroup
[ 6454.127966] BTRFS: selftest: Qgroup basic add
[ 6480.152005] BUG: soft lockup - CPU#0 stuck for 23s! [modprobe:5383]
[ 6480.152005] Modules linked in: btrfs(+) xor raid6_pq binfmt_misc nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc i2c_piix4 i2c_core pcspkr evbug psmouse serio_raw e1000 [last unloaded: btrfs]
[ 6480.152005] irq event stamp: 188448
[ 6480.152005] hardirqs last  enabled at (188447): [<ffffffff8168ef5c>] restore_args+0x0/0x30
[ 6480.152005] hardirqs last disabled at (188448): [<ffffffff81698e6a>] apic_timer_interrupt+0x6a/0x80
[ 6480.152005] softirqs last  enabled at (188446): [<ffffffff810516cf>] __do_softirq+0x1cf/0x450
[ 6480.152005] softirqs last disabled at (188441): [<ffffffff81051c25>] irq_exit+0xb5/0xc0
[ 6480.152005] CPU: 0 PID: 5383 Comm: modprobe Not tainted 3.15.0-rc8-fdm-btrfs-next-33+ #4
[ 6480.152005] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 6480.152005] task: ffff8802146125a0 ti: ffff8800d0d00000 task.ti: ffff8800d0d00000
[ 6480.152005] RIP: 0010:[<ffffffff81349a63>]  [<ffffffff81349a63>] __write_lock_failed+0x13/0x20
[ 6480.152005] RSP: 0018:ffff8800d0d038e8  EFLAGS: 00000287
[ 6480.152005] RAX: 0000000000000000 RBX: ffffffff8168ef5c RCX: 000005deb8525852
[ 6480.152005] RDX: 0000000000000000 RSI: 0000000000001d45 RDI: ffff8802105000b8
[ 6480.152005] RBP: ffff8800d0d038e8 R08: fffffe12710f63db R09: ffffffffa03196fb
[ 6480.152005] R10: ffff8802146125a0 R11: ffff880214612e28 R12: ffff8800d0d03858
[ 6480.152005] R13: 0000000000000000 R14: ffff8800d0d00000 R15: ffff8802146125a0
[ 6480.152005] FS:  00007f14ff804700(0000) GS:ffff880215e00000(0000) knlGS:0000000000000000
[ 6480.152005] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 6480.152005] CR2: 00007fff4df0dac8 CR3: 00000000d1796000 CR4: 00000000000006f0
[ 6480.152005] Stack:
[ 6480.152005]  ffff8800d0d03908 ffffffff810ae967 0000000000000001 ffff8802105000b8
[ 6480.152005]  ffff8800d0d03938 ffffffff8168e57e ffffffffa0319c16 0000000000000007
[ 6480.152005]  ffff880210500000 ffff880210500100 ffff8800d0d039b8 ffffffffa0319c16
[ 6480.152005] Call Trace:
[ 6480.152005]  [<ffffffff810ae967>] do_raw_write_lock+0x47/0xa0
[ 6480.152005]  [<ffffffff8168e57e>] _raw_write_lock+0x5e/0x80
[ 6480.152005]  [<ffffffffa0319c16>] ? btrfs_tree_lock+0x116/0x270 [btrfs]
[ 6480.152005]  [<ffffffffa0319c16>] btrfs_tree_lock+0x116/0x270 [btrfs]
[ 6480.152005]  [<ffffffffa02b2acb>] btrfs_lock_root_node+0x3b/0x50 [btrfs]
[ 6480.152005]  [<ffffffffa02b81a6>] btrfs_search_slot+0x916/0xa20 [btrfs]
[ 6480.152005]  [<ffffffff811a727f>] ? create_object+0x23f/0x300
[ 6480.152005]  [<ffffffffa02b9958>] btrfs_insert_empty_items+0x78/0xd0 [btrfs]
[ 6480.152005]  [<ffffffffa036041a>] insert_normal_tree_ref.constprop.4+0xa2/0x19a [btrfs]
[ 6480.152005]  [<ffffffffa03605c3>] test_no_shared_qgroup+0xb1/0x1ca [btrfs]
[ 6480.152005]  [<ffffffff8108cad6>] ? local_clock+0x16/0x30
[ 6480.152005]  [<ffffffffa035ef8e>] btrfs_test_qgroups+0x1ae/0x1d7 [btrfs]
[ 6480.152005]  [<ffffffffa03a69d2>] ? ftrace_define_fields_btrfs_space_reservation+0xfd/0xfd [btrfs]
[ 6480.152005]  [<ffffffffa03a6a86>] init_btrfs_fs+0xb4/0x153 [btrfs]
[ 6480.152005]  [<ffffffff81000352>] do_one_initcall+0x102/0x150
[ 6480.152005]  [<ffffffff8103d223>] ? set_memory_nx+0x43/0x50
[ 6480.152005]  [<ffffffff81682668>] ? set_section_ro_nx+0x6d/0x74
[ 6480.152005]  [<ffffffff810d91cc>] load_module+0x1cdc/0x2630
(...)

Therefore initialize the extent buffer as an empty leaf (level 0).

Issue easy to reproduce when btrfs is built as a module via:

    $ for ((i = 1; i <= 1000000; i++)); do rmmod btrfs; modprobe btrfs; done
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NChris Mason <clm@fb.com>

Mark the dereference as protected by lock. Not doing so triggers
an RCU warning since the radix tree assumed that RCU is in use.
Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
Signed-off-by: NChris Mason <clm@fb.com>

Steps to reproduce:

 # mkfs.btrfs -f /dev/sd[b-f] -m raid5 -d raid5
 # mkfs.ext4 /dev/sdc --->corrupt one of btrfs device
 # mount /dev/sdb /mnt -o degraded
 # btrfs scrub start -BRd /mnt

This is because readahead would skip missing device, this is not true
for RAID5/6, because REQ_GET_READ_MIRRORS return 1 for RAID5/6 block
mapping. If expected data locates in missing device, readahead thread
would not call __readahead_hook() which makes event @rc->elems=0
wait forever.

Fix this problem by checking return value of btrfs_map_block(),we
can only skip missing device safely if there are several mirrors.
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

This new ioctl call allows the user to supply a buffer of varying size in which
a tree search can store its results. This is much more flexible if you want to
receive items which are larger than the current fixed buffer of 3992 bytes or
if you want to fetch more items at once. Items larger than this buffer are for
example some of the type EXTENT_CSUM.
Signed-off-by: NGerhard Heift <Gerhard@Heift.Name>
Signed-off-by: NChris Mason <clm@fb.com>
Acked-by: NDavid Sterba <dsterba@suse.cz>

By copying each found item seperatly to userspace, we do not need extra
buffer in the kernel.
Signed-off-by: NGerhard Heift <Gerhard@Heift.Name>
Signed-off-by: NChris Mason <clm@fb.com>
Acked-by: NDavid Sterba <dsterba@suse.cz>

This new function reads the content of an extent directly to user memory.
Signed-off-by: NGerhard Heift <Gerhard@Heift.Name>
Signed-off-by: NChris Mason <clm@fb.com>
Acked-by: NDavid Sterba <dsterba@suse.cz>

If an item in tree_search is too large to be stored in the given buffer, return
the needed size (including the header).
Signed-off-by: NGerhard Heift <Gerhard@Heift.Name>
Signed-off-by: NChris Mason <clm@fb.com>
Acked-by: NDavid Sterba <dsterba@suse.cz>

In copy_to_sk, if an item is too large for the given buffer, it now returns
-EOVERFLOW instead of copying a search_header with len = 0. For backward
compatibility for the first item it still copies such a header to the buffer,
but not any other following items, which could have fitted.

tree_search changes -EOVERFLOW back to 0 to behave similiar to the way it
behaved before this patch.
Signed-off-by: NGerhard Heift <Gerhard@Heift.Name>
Signed-off-by: NChris Mason <clm@fb.com>
Acked-by: NDavid Sterba <dsterba@suse.cz>

rewrite search_ioctl to accept a buffer with varying size
Signed-off-by: NGerhard Heift <Gerhard@Heift.Name>
Signed-off-by: NChris Mason <clm@fb.com>
Acked-by: NDavid Sterba <dsterba@suse.cz>

If the amount of items reached the given limit of nr_items, we can leave
copy_to_sk without updating the key. Also by returning 1 we leave the loop in
search_ioctl without rechecking if we reached the given limit.
Signed-off-by: NGerhard Heift <Gerhard@Heift.Name>
Signed-off-by: NChris Mason <clm@fb.com>
Acked-by: NDavid Sterba <dsterba@suse.cz>

The connection struct with nodeid 0 is the listening socket,
not a connection to another node.  The sctp resend function
was not checking that the nodeid was valid (non-zero), so it
would mistakenly get and resend on the listening connection
when nodeid was zero.
Signed-off-by: NLidong Zhong <lzhong@suse.com>
Signed-off-by: NDavid Teigland <teigland@redhat.com>

Dentry that had been through (or into) __dentry_kill() might be seen
by shrink_dentry_list(); that's normal, it'll be taken off the shrink
list and freed if __dentry_kill() has already finished.  The problem
is, its ->d_parent might be pointing to already freed dentry, so
lock_parent() needs to be careful.

We need to check that dentry hasn't already gone into __dentry_kill()
*and* grab rcu_read_lock() before dropping ->d_lock - the latter makes
sure that whatever we see in ->d_parent after dropping ->d_lock it
won't be freed until we drop rcu_read_lock().
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

no callers left
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

ocfs2 was using a bunch of splice.c guts...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

iter_file_splice_write() - a ->splice_write() instance that gathers the
pipe buffers, builds a bio_vec-based iov_iter covering those and feeds
it to ->write_iter().  A bunch of simple cases coverted to that...

[AV: fixed the braino spotted by Cyrill]
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

There was a bug in debug printout when CONFIG_REISERFS_CHECK was
enabled so one of the assertions in do_balan.c didn't compile. Fix it.

Fixes: 0080e9f9Signed-off-by: NJan Kara <jack@suse.cz>

When o2net-accept-one() rejects an illegal connection, it terminates the
loop picking up the remaining queued connections.  This fix will
continue accepting connections till the queue is emtpy.

Addresses Orabug 17489469.
Signed-off-by: NTariq Saseed <tariq.x.saeed@oracle.com>
Signed-off-by: NSrinivas Eeda <srinivas.eeda@oracle.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The kernel has no concept of capabilities with respect to inodes; inodes
exist independently of namespaces.  For example, inode_capable(inode,
CAP_LINUX_IMMUTABLE) would be nonsense.

This patch changes inode_capable to check for uid and gid mappings and
renames it to capable_wrt_inode_uidgid, which should make it more
obvious what it does.

Fixes CVE-2014-4014.

Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The new call is smp_mb__{before,after}_atomic.  The __ gives us extra
protection from the atomic rays.
Signed-off-by: NChris Mason <clm@fb.com>

Otherwise the kernel oopses when remounting with IPv6 server because
net is dereferenced in dev_get_by_name.

Use net ns of current thread so that dev_get_by_name does not operate on
foreign ns. Changing the address is prohibited anyway so this should not
affect anything.
Signed-off-by: NMateusz Guzik <mguzik@redhat.com>
Cc: linux-nfs@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # 3.4+
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

end_offset and req_offset both return u64 - avoid casting to u32
until it's needed, when it's less than the (u32) size returned by
nfs_generic_pg_test.

Also, fix the comments in pnfs_generic_pg_test.

Running the cthon04 special tests caused this lockup in the
"write/read at 2GB, 4GB edges" test when running against a file layout server:

BUG: soft lockup - CPU#0 stuck for 22s! [bigfile2:823]
Modules linked in: nfs_layout_nfsv41_files rpcsec_gss_krb5 nfsv4 nfs fscache ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_mangle ip6table_filter ip6_tables iptable_nat nf_nat_ipv4 nf_nat iptable_mangle ppdev crc32c_intel aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd serio_raw e1000 shpchp i2c_piix4 i2c_core parport_pc parport nfsd auth_rpcgss oid_registry exportfs nfs_acl lockd sunrpc btrfs xor zlib_deflate raid6_pq mptspi scsi_transport_spi mptscsih mptbase ata_generic floppy autofs4
irq event stamp: 205958
hardirqs last  enabled at (205957): [<ffffffff814a62dc>] restore_args+0x0/0x30
hardirqs last disabled at (205958): [<ffffffff814ad96a>] apic_timer_interrupt+0x6a/0x80
softirqs last  enabled at (205956): [<ffffffff8103ffb2>] __do_softirq+0x1ea/0x2ab
softirqs last disabled at (205951): [<ffffffff8104026d>] irq_exit+0x44/0x9a
CPU: 0 PID: 823 Comm: bigfile2 Not tainted 3.15.0-rc1-branch-pgio_plus+ #3
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013
task: ffff8800792ec480 ti: ffff880078c4e000 task.ti: ffff880078c4e000
RIP: 0010:[<ffffffffa02ce51f>]  [<ffffffffa02ce51f>] nfs_page_group_unlock+0x3e/0x4b [nfs]
RSP: 0018:ffff880078c4fab0  EFLAGS: 00000202
RAX: 0000000000000fff RBX: ffff88006bf83300 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff88006bf83300
RBP: ffff880078c4fab8 R08: 0000000000000001 R09: 0000000000000000
R10: ffffffff8249840c R11: 0000000000000000 R12: 0000000000000035
R13: ffff88007ffc72d8 R14: 0000000000000001 R15: 0000000000000000
FS:  00007f45f11b7740(0000) GS:ffff88007f200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f3a8cb632d0 CR3: 000000007931c000 CR4: 00000000001407f0
Stack:
 ffff88006bf832c0 ffff880078c4fb00 ffffffffa02cec22 ffff880078c4fad8
 00000fff810f9d99 ffff880078c4fca0 ffff88006bf832c0 ffff88006bf832c0
 ffff880078c4fca0 ffff880078c4fd60 ffff880078c4fb28 ffffffffa02cee34
Call Trace:
 [<ffffffffa02cec22>] __nfs_pageio_add_request+0x298/0x34f [nfs]
 [<ffffffffa02cee34>] nfs_pageio_add_request+0x1f/0x42 [nfs]
 [<ffffffffa02d1722>] nfs_do_writepage+0x1b5/0x1e4 [nfs]
 [<ffffffffa02d1764>] nfs_writepages_callback+0x13/0x25 [nfs]
 [<ffffffffa02d1751>] ? nfs_do_writepage+0x1e4/0x1e4 [nfs]
 [<ffffffff810eb32d>] write_cache_pages+0x254/0x37f
 [<ffffffffa02d1751>] ? nfs_do_writepage+0x1e4/0x1e4 [nfs]
 [<ffffffff8149cf9e>] ? printk+0x54/0x56
 [<ffffffff810eacca>] ? __set_page_dirty_nobuffers+0x22/0xe9
 [<ffffffffa016d864>] ? put_rpccred+0x38/0x101 [sunrpc]
 [<ffffffffa02d1ae1>] nfs_writepages+0xb4/0xf8 [nfs]
 [<ffffffff810ec59c>] do_writepages+0x21/0x2f
 [<ffffffff810e36e8>] __filemap_fdatawrite_range+0x55/0x57
 [<ffffffff810e374a>] filemap_write_and_wait_range+0x2d/0x5b
 [<ffffffffa030ba0a>] nfs4_file_fsync+0x3a/0x98 [nfsv4]
 [<ffffffff8114ee3c>] vfs_fsync_range+0x18/0x20
 [<ffffffff810e40c2>] generic_file_aio_write+0xa7/0xbd
 [<ffffffffa02c5c6b>] nfs_file_write+0xf0/0x170 [nfs]
 [<ffffffff81129215>] do_sync_write+0x59/0x78
 [<ffffffff8112956c>] vfs_write+0xab/0x107
 [<ffffffff81129c8b>] SyS_write+0x49/0x7f
 [<ffffffff814acd12>] system_call_fastpath+0x16/0x1b
Reported-by: NAnna Schumaker <Anna.Schumaker@netapp.com>
Signed-off-by: NWeston Andros Adamson <dros@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

The skinny extents are intepreted incorrectly in scrub_print_warning(),
and end up hitting the BUG() in btrfs_extent_inline_ref_size.
Reported-by: NKonstantinos Skarlatos <k.skarlatos@gmail.com>
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <clm@fb.com>

When cloning into a file, we were correctly replacing the extent
items in the target range and removing the extent maps. However
we weren't replacing the extent maps with new ones that point to
the new extents - as a consequence, an incremental fsync (when the
inode doesn't have the full sync flag) was a NOOP, since it relies
on the existence of extent maps in the modified list of the inode's
extent map tree, which was empty. Therefore add new extent maps to
reflect the target clone range.

A test case for xfstests follows.
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NChris Mason <clm@fb.com>

We want to make sure the point is still within the extent item, not to verify
the memory it's pointing to.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <clm@fb.com>

The backref code was looking at nodes as well as leaves when we tried to
populate extent item entries.  This is not good, and although we go away with it
for the most part because we'd skip where disk_bytenr != random_memory,
sometimes random_memory would match and suddenly boom.  This fixes that problem.
Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

In inode.c:btrfs_page_exists_in_range(), if the page we got from
the radix tree is an exception entry, which can't be retried, we
exit the loop with a non-NULL page and then call page_cache_release
against it, which is not ok since it's not a valid page. This could
also make us return true when we shouldn't.
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NChris Mason <clm@fb.com>

In inode.c:btrfs_page_exists_in_range(), if the page we get from the
radix tree is an exception which should make us retry, set page to
NULL in order to really retry, because otherwise we don't get another
loop iteration executed (page != NULL makes the while loop exit).
This also was making us call page_cache_release after exiting the loop,
which isn't correct because page doesn't point to a valid page, and
possibly return true from the function when we shouldn't.
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NChris Mason <clm@fb.com>

In inode.c:btrfs_page_exists_in_range(), if we can't get the page
we need to retry. However we weren't retrying because we weren't
setting page to NULL, which makes the while loop exit immediately
and will make us call page_cache_release after exiting the loop
which is incorrect because our page get didn't succeed. This could
also make us return true when we shouldn't.
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NChris Mason <clm@fb.com>

To return EOPNOTSUPP is more user friendly than to return EINVAL,
and then user-space tool will show that the dev_replace operation
for raid56 is not currently supported rather than showing that
there is an invalid argument.
Signed-off-by: NGui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

Signed-off-by: NAntonio Ospite <ao2@ao2.it>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: linux-btrfs@vger.kernel.org
Signed-off-by: NChris Mason <clm@fb.com>

Several reports about leaf corruption has been floating on the list, one of them
points to __btrfs_drop_extents(), and we find that the leaf becomes corrupted
after __btrfs_drop_extents(), it's really a rare case but it does exist.

The problem turns out to be btrfs_next_leaf() called in __btrfs_drop_extents().

So in btrfs_next_leaf(), we release the current path to re-search the last key of
the leaf for locating next leaf, and we've taken it into account that there might
be balance operations between leafs during this 'unlock and re-lock' dance, so
we check the path again and advance it if there are now more items available.
But things are a bit different if that last key happens to be removed and balance
gets a bigger key as the last one, and btrfs_search_slot will return it with
ret > 0, IOW, nothing change in this leaf except the new last key, then we think
we're okay because there is no more item balanced in, fine, we thinks we can
go to the next leaf.

However, we should return that bigger key, otherwise we deserve leaf corruption,
for example, in endio, skipping that key means that __btrfs_drop_extents() thinks
it has dropped all extent matched the required range and finish_ordered_io can
safely insert a new extent, but it actually doesn't and ends up a leaf
corruption.

One may be asking that why our locking on extent io tree doesn't work as
expected, ie. it should avoid this kind of race situation.  But in
__btrfs_drop_extents(), we don't always find extents which are included within
our locking range, IOW, extents can start before our searching start, in this
case locking on extent io tree doesn't protect us from the race.

This takes the special case into account.
Reviewed-by: NFilipe Manana <fdmanana@gmail.com>
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <clm@fb.com>

We might have had an item with the previous key in the tree right
before we released our path. And after we released our path, that
item might have been pushed to the first slot (0) of the leaf we
were holding due to a tree balance. Alternatively, an item with the
previous key can exist as the only element of a leaf (big fat item).
Therefore account for these 2 cases, so that our callers (like
btrfs_previous_item) don't miss an existing item with a key matching
the previous key we computed above.
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NChris Mason <clm@fb.com>

If the NO_HOLES feature is enabled holes don't have file extent items in
the btree that represent them anymore. This made the clone operation
ignore the gaps that exist between consecutive file extent items and
therefore not create the holes at the destination. When not using the
NO_HOLES feature, the holes were created at the destination.

A test case for xfstests follows.
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <clm@fb.com>

On heavy workloads, we're seeing soft lockup warnings on
root->inode_lock in __btrfs_release_delayed_node. The low hanging fruit
is to reduce the size of the critical section.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>