- 09 4月, 2017 3 次提交
-
-
由 Florian Fainelli 提交于
All DSA tag receive functions need to unshare the skb before mangling it, move this to the generic dsa_switch_rcv() function which will allow us to make the tag receive function return their mangled skb without caring about freeing a NULL skb. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
dsa_switch_rcv() already tests for dst == NULL, so there is no need to duplicate the same check within the tag receive functions. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steffen Klassert 提交于
All available gso_type flags are currently in use, so extend gso_type from 'unsigned short' to 'unsigned int' to be able to add further flags. We reorder the struct skb_shared_info to use two bytes of the four byte hole before dataref. All fields before dataref are cleared, i.e. four bytes more than before the change. The remaining two byte hole is moved to the beginning of the structure, this protects us from immediate overwites on out of bound writes to the sk_buff head. Structure layout on x86-64 before the change: struct skb_shared_info { unsigned char nr_frags; /* 0 1 */ __u8 tx_flags; /* 1 1 */ short unsigned int gso_size; /* 2 2 */ short unsigned int gso_segs; /* 4 2 */ short unsigned int gso_type; /* 6 2 */ struct sk_buff * frag_list; /* 8 8 */ struct skb_shared_hwtstamps hwtstamps; /* 16 8 */ u32 tskey; /* 24 4 */ __be32 ip6_frag_id; /* 28 4 */ atomic_t dataref; /* 32 4 */ /* XXX 4 bytes hole, try to pack */ void * destructor_arg; /* 40 8 */ skb_frag_t frags[17]; /* 48 272 */ /* --- cacheline 5 boundary (320 bytes) --- */ /* size: 320, cachelines: 5, members: 12 */ /* sum members: 316, holes: 1, sum holes: 4 */ }; Structure layout on x86-64 after the change: struct skb_shared_info { short unsigned int _unused; /* 0 2 */ unsigned char nr_frags; /* 2 1 */ __u8 tx_flags; /* 3 1 */ short unsigned int gso_size; /* 4 2 */ short unsigned int gso_segs; /* 6 2 */ struct sk_buff * frag_list; /* 8 8 */ struct skb_shared_hwtstamps hwtstamps; /* 16 8 */ unsigned int gso_type; /* 24 4 */ u32 tskey; /* 28 4 */ __be32 ip6_frag_id; /* 32 4 */ atomic_t dataref; /* 36 4 */ void * destructor_arg; /* 40 8 */ skb_frag_t frags[17]; /* 48 272 */ /* --- cacheline 5 boundary (320 bytes) --- */ /* size: 320, cachelines: 5, members: 13 */ }; Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 4月, 2017 16 次提交
-
-
由 Felix Manlunas 提交于
For security reasons, NIC firmware does not allow VF to set its VLAN if PF set it already. Firmware allows VF to set its VLAN if PF did not set it. After the VF instructs the firmware to set the VLAN, VF always indicates (via return 0) that the operation is successful--even for the times when it isn't. Put in a mechanism for the VF's set VLAN function to receive the firmware response code, then make that function return -EPERM if the firmware forbids the operation. Make that mechanism available for other functions that may, in the future, be interested in receiving the response code from the firmware. That mechanism involves adding new fields to struct octnic_ctrl_pkt, so make all users of struct octnic_ctrl_pkt initialize the struct to zero before using it; otherwise, the mechanism might act on uninitialized garbage. Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com> Signed-off-by: NDerek Chickles <derek.chickles@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 K. Y. Srinivasan 提交于
Prior to opening the channel we should have all the state setup to handle interrupts. The current code does not do that; fix the bug. This bug can result in faults in the interrupt path. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
The SMI clause 22 & 45 read/write operations are local to the global2.c file, so make them static. This eliminates the following warning: drivers/net/dsa/mv88e6xxx/global2.c:571:5: warning: no previous prototype for 'mv88e6xxx_g2_smi_phy_read_c45' [-Wmissing-prototypes] int mv88e6xxx_g2_smi_phy_read_c45(struct mv88e6xxx_chip *chip, int addr, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/dsa/mv88e6xxx/global2.c:602:5: warning: no previous prototype for 'mv88e6xxx_g2_smi_phy_read_c22' [-Wmissing-prototypes] int mv88e6xxx_g2_smi_phy_read_c22(struct mv88e6xxx_chip *chip, int addr, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/dsa/mv88e6xxx/global2.c:635:5: warning: no previous prototype for 'mv88e6xxx_g2_smi_phy_write_c45' [-Wmissing-prototypes] int mv88e6xxx_g2_smi_phy_write_c45(struct mv88e6xxx_chip *chip, int addr, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/dsa/mv88e6xxx/global2.c:664:5: warning: no previous prototype for 'mv88e6xxx_g2_smi_phy_write_c22' [-Wmissing-prototypes] int mv88e6xxx_g2_smi_phy_write_c22(struct mv88e6xxx_chip *chip, int addr, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Suggested-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
It's rather confusing that the netlink message flags are numbered 1, 2, 4, 8, 16, 32, <unused>, 0x100. Make that more understandable by numbering the lower ones with hex constants as well. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
On the case where nn->eth_port is null the warning message is printing the port by dereferencing this null pointer. Remove the deference to avoid a crash when printing the warning message. Detected by CoverityScan, CID#1426198 ("Dereference after null check") Fixes: ce22f5a2 ("nfp: separate high level and low level NSP headers") Signed-off-by: NColin Ian King <colin.king@canonical.com> Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Chenbo Feng says: ==================== New getsockopt option to retrieve socket cookie In the current kernel socket cookie implementation, there is no simple and direct way to retrieve the socket cookie based on file descriptor. A process mat need to get it from sock fd if it want to correlate with sock_diag output or use a bpf map with new socket cookie function. If userspace wants to receive the socket cookie for a given socket fd, it must send a SOCK_DIAG_BY_FAMILY dump request and look for the 5-tuple. This is slow and can be ambiguous in the case of sockets that have the same 5-tuple (e.g., tproxy / transparent sockets, SO_REUSEPORT sockets, etc.). As shown in the example program. The xt_eBPF program is using socket cookie to record the network traffics statistics and with the socket cookie retrieved by getsockopt. The program can directly access to a specific socket data without scanning the whole bpf map. ==================== Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chenbo Feng 提交于
Added a per socket traffic monitoring option to illustrate the usage of new getsockopt SO_COOKIE. The program is based on the socket traffic monitoring program using xt_eBPF and in the new option the data entry can be directly accessed using socket cookie. The cookie retrieved allow us to lookup an element in the eBPF for a specific socket. Signed-off-by: NChenbo Feng <fengc@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chenbo Feng 提交于
Introduce a new getsockopt operation to retrieve the socket cookie for a specific socket based on the socket fd. It returns a unique non-decreasing cookie for each socket. Tested: https://android-review.googlesource.com/#/c/358163/Acked-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NChenbo Feng <fengc@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux由 David S. Miller 提交于
Saeed Mahameed says: ==================== mlx5-updates-2017-04-16 This patchset provides some updates for the mlx5 drivers. From Majd, 1st patch, Adds ConnectX-6 and ConnectX-6 VF PCI IDs support. From Guy, 2nd patch, Adds RXFCS scatter support. 3rd patch, Small cleanup to make a function static. From Eran, 4th patch, Adds 4 zeros padding to ethtool FW version. 6th patch, Trevial code reuse cleanup From Inbar, 5th patch, Show board id in ethtool driver information From Saeed, 7th patch, Set default RX moderation parameters on driver load as a small fix for the latest fail-safe config feature. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thanneeru Srinivasulu 提交于
Adding support for TSO and checksum hardware offloads for ipv6. Signed-off-by: NThanneeru Srinivasulu <tsrinivasulu@cavium.com> Signed-off-by: NSunil Goutham <sgoutham@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Sean Wang says: ==================== net-next: dsa: add Mediatek MT7530 support MT7530 is a 7-ports Gigabit Ethernet Switch that could be found on Mediatek router platforms such as MT7623A or MT7623N which includes 7-port Gigabit Ethernet MAC and 5-port Gigabit Ethernet PHY. Among these ports, The port from 0 to 4 are the user ports connecting with the remote devices while the port 5 and 6 are the CPU ports connecting into Mediatek Ethernet GMAC. The patch series integrated Mediatek MT7530 into DSA support which includes the most of the essential callbacks such as tag insertion for port distinguishing, port control, bridge offloading, STP setup and ethtool operations to allow DSA to model each user port into independently standalone netdevice as the other DSA driver had done. Changes since v1: - rebased into 4.11-rc1 - refined binding document including below five items - changed the type of mediatek,mcm into bool - used reset controller binding for MCM reset and removed "mediatek,ethsys" property from binding - reused CPU port's ethernet Phandle instead of creating new one and removed "mediatek,ethernet" property from binding - aligned naming for GPIO reset with dsa/marvell.txt - added phy-mode as required property child nodes within ports container - handled gpio reset with devm_gpiod_* API - refined comment words - removed condition for CDM setting since the setup looks both fine for all cases - allowed of_find_net_device_by_node() working with pointing the device node into real netdev instance - fixed Kbuild warnings Changes since v2: - reuse readx_poll_timeout() to poll - add proper macro instead of hard coding - treat inconsistent cpu port as warning - remove the usage for regmap-debugfs - show error message when invalid id is found - put the logic for the setup of trgmii into adjut_link() - refine and reuse logic between port_[disable,enable], and default port setup - correct typo Changes since v3: - used struct as the parameter for readx_poll_timeout() and kill extra lpriv defined - moved around function to get out of an additional declaration - fixed kbuild errors caused by missing proper include in the latest tree ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
MT7530 is a 7-ports Gigabit Ethernet Switch that could be found on Mediatek router platforms such as MT7623A or MT7623N platform which includes 7-port Gigabit Ethernet MAC and 5-port Gigabit Ethernet PHY. Among these ports, The port from 0 to 4 are the user ports connecting with the remote devices while the port 5 and 6 are the CPU ports connecting into Mediatek Ethernet GMAC. For port 6, it can communicate with the CPU via Mediatek Ethernet GMAC through either the TRGMII or RGMII which could be controlled by phy-mode in the dt-bindings to specify which mode is preferred to use. And for port 5, only RGMII can be specified. However, currently, only port 6 is being supported in this DSA driver. The driver is made with the reference to qca8k and other existing DSA driver. The most of the essential callbacks of the DSA are already support in the driver, including tag insert for user port distinguishing, port control, bridge offloading, STP setup and ethtool operation to allow DSA to model each user port into a standalone netdevice as the other DSA driver had done. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Signed-off-by: NLanden Chao <Landen.Chao@mediatek.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
the patch adds the setup of the corresponding device node of GMAC into the netdev instance which could allow other modules such as DSA to find the instance through the node in dt-bindings using of_find_net_device_by_node() call. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
The patch adds the setup for allowing CDM can recognize these packets with carrying port-distinguishing tag. Otherwise, these tagging packets will be handled incorrectly by CDM. The setup is also working out for general untag packets as well. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Signed-off-by: NLanden Chao <Landen.Chao@mediatek.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
Add the support for the 4-bytes tag for DSA port distinguishing inserted allowing receiving and transmitting the packet via the particular port. The tag is being added after the source MAC address in the ethernet header. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Signed-off-by: NLanden Chao <Landen.Chao@mediatek.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
Add device-tree binding for Mediatek MT7530 switch. Cc: devicetree@vger.kernel.org Signed-off-by: NSean Wang <sean.wang@mediatek.com> Acked-by: NRob Herring <robh@kernel.org> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 4月, 2017 21 次提交
-
-
由 Florian Larysch 提交于
inet_rtm_getroute synthesizes a skeletal ICMP skb, which is passed to ip_route_input when iif is given. If a multipath route is present for the designated destination, fib_multipath_hash ends up being called with that skb. However, as that skb contains no information beyond the protocol type, the calculated hash does not match the one we would see for a real packet. There is currently no way to fix this for layer 4 hashing, as RTM_GETROUTE doesn't have the necessary information to create layer 4 headers. To fix this for layer 3 hashing, set appropriate saddr/daddrs in the skb and also change the protocol to UDP to avoid special treatment for ICMP. Signed-off-by: NFlorian Larysch <fl@n621.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Joao Pinto says: ==================== net: stmmac: adding multiple buffers This patch adds multiple buffers to stmmac in a more fragmented way, in order to make problem debug easier. I would kindly request to people to test this patch in their HWs in order to check if everything's functional. Thank you. ==================== Tested-by: NCorentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joao Pinto 提交于
This patch adds the napi variable to the stmmac_rx_queue structure and forces that operations like netif_queue_stopped, netif_wake_queue, netif_stop_queue, netdev_reset_queue and netdev_sent_queue be made by queue. Signed-off-by: NJoao Pinto <jpinto@synopsys.com> Tested-by: NNiklas Cassel <niklas.cassel@axis.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joao Pinto 提交于
This patch adds the structure stmmac_tx_queue which contains tx queues specific data (previously in stmmac_priv). Signed-off-by: NJoao Pinto <jpinto@synopsys.com> Tested-by: NNiklas Cassel <niklas.cassel@axis.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joao Pinto 提交于
This patch adds the structure stmmac_rx_queue which contains rx queues specific data (previously in stmmac_priv). Signed-off-by: NJoao Pinto <jpinto@synopsys.com> Tested-by: NNiklas Cassel <niklas.cassel@axis.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joao Pinto 提交于
This patch breaks several functions into RX and TX scopes, which will be useful when adding multiple buffers mechanism. Signed-off-by: NJoao Pinto <jpinto@synopsys.com> Tested-by: NNiklas Cassel <niklas.cassel@axis.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Tobias Klauser says: ==================== Use net_device_stats from struct net_device Along the lines of previous patches, switch (almost) all remaining net drivers to use net_device_stats from net_device instead of including a copy of it in their netdev_priv struct. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
Instead of using a private copy of struct net_device_stats in struct pegasus, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Cc: Petko Manolov <petkan@nucleusys.com> Cc: linux-usb@vger.kernel.org Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
Instead of using a private copy of struct net_device_stats in struct kaweth_device, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Cc: linux-usb@vger.kernel.org Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
Instead of using a private copy of struct net_device_stats in struct typhoon, use stats from struct net_device. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
Instead of using a private copy of struct net_device_stats in struct de_private, use stats from struct net_device. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
Instead of using a private copy of struct net_device_stats in struct happy_meal, use stats from struct net_device. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
Instead of using a private copy of struct net_device_stats in struct bigmac, use stats from struct net_device. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
Instead of using a private copy of struct net_device_stats in struct w90p910_ether, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
Instead of using a private copy of struct net_device_stats in struct _mace_private, use stats from struct net_device. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
Instead of using a private copy of struct net_device_stats in struct moxart_mac_priv_t, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
Instead of using a private copy of struct net_device_stats in struct macb, use stats from struct net_device. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
Instead of using a private copy of struct net_device_stats in struct emac_instance, use stats from struct net_device. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
Instead of using a private copy of struct net_device_stats in struct netdev_private, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function and the #ifdef'ed increment of the collisions16 counter which doesn't exist in struct net_device_stats. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
Instead of using a private copy of struct net_device_stats in struct port_info, use stats from struct net_device. Cc: Santosh Raspatur <santosh@chelsio.com> Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
Instead of using a private copy of struct net_device_stats in struct port_info, use stats from struct net_device. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-