Add MAINTAINERS entries for new scx200_hrt and pc8736x_gpio drivers, and
take over maintenance of scx200_gpio, authored by Christer Weinigel (which
I've hacked at), who no longer has the hardware.

Also take over hwmon/pc87360, authored by Jean Delvare, who's dropped
maintenance to dedicate more time to hwmon subsystem.
Signed-off-by: NJim Cromie <jim.cromie@gmail.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Christer Weinigel <christer@weinigel.se>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Trivial typo fix in the "syntax error if percpu macros are incorrectly
used" patch.  I misspelled "identifier" in all places.  D'Oh!

Thanks to Dirk Mueller to point this out.
Signed-off-by: NJan Blunck <jblunck@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

annotate, fix the bogus argument of vmap() in it.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The recent header cleanup removed PAGE_SIZE from the exported information as
it depends on the configuration.

BTW This has possibly other consequences, as the core dump code is using
PAGE_SIZE directly, which may need fixing as well.
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

avoid unnecessary xchg() use in set_mb()
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Jump to the correct exit label after exception
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- cleanup asm of string functions
- deinline strncat()/strncmp()
- provide non-inlined strcpy()
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Provide a tickadj compatibility define for archs still using it.
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a way for a no_page() handler to request a retry of the faulting
instruction.  It goes back to userland on page faults and just tries again
in get_user_pages().  I added a cond_resched() in the loop in that later
case.

The problem I have with signal and spufs is an actual bug affecting apps and I
don't see other ways of fixing it.

In addition, we are having issues with infiniband and 64k pages (related to
the way the hypervisor deals with some HV cards) that will require us to muck
around with the MMU from within the IB driver's no_page() (it's a pSeries
specific driver) and return to the caller the same way using NOPAGE_REFAULT.

And to add to this, the graphics folks have been following a new approach of
memory management that involves transparently swapping objects between video
ram and main meory.  To do that, they need installing PTEs from a no_page()
handler as well and that also requires returning with NOPAGE_REFAULT.

(For the later, they are currently using io_remap_pfn_range to install one PTE
from no_page() which is a bit racy, we need to add a check for the PTE having
already been installed afer taking the lock, but that's ok, they are only at
the proof-of-concept stage.  I'll send a patch adding a "clean" function to do
that, we can use that from spufs too and get rid of the sparsemem hacks we do
to create struct page for SPEs.  Basically, that provides a generic solution
for being able to have no_page() map hardware devices, which is something that
I think sound driver folks have been asking for some time too).

All of these things depend on having the NOPAGE_REFAULT exit path from
no_page() handlers.
Signed-off-by: NBenjamin Herrenchmidt <benh@kernel.crashing.org>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Reduce the NUMA text size of mm/slab.o a little on x86 by using a local
variable to store the result of numa_node_id().

    text    data     bss     dec     hex filename
   16858    2584      16   19458    4c02 mm/slab.o (before)
   16804    2584      16   19404    4bcc mm/slab.o (after)

[akpm@osdl.org: use better names]
[pbadari@us.ibm.com: fix that]
Cc: Christoph Lameter <christoph@lameter.com>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is a more correct fix for the way the ohci hcd was referencing pt_regs
in the unlink paths.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Modules might want this.

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Tim and Ananiev report that the recent WARN_ON_ONCE changes cause increased
cache misses with the tbench workload.  Apparently due to the access to the
newly-added static variable.

Rearrange the code so that we don't touch that variable unless the warning is
going to trigger.

Also rework the logic so that the static variable starts out at zero, so we
can move it into bss.

It would seem logical to mark the static variable as __read_mostly too.  But
it would be wrong, because that would put it back into the vmlinux image, and
the kernel will never read from this variable in normal operation anyway.
Unless the compiler or hardware go and do some prefetching on us?

For some reason this patch shrinks softirq.o text by 40 bytes.

Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Ananiev, Leonid I" <leonid.i.ananiev@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Squash this warning:

  kernel/audit.c: In function 'kauditd_thread':
  kernel/audit.c:367: warning: no return statement in function returning non-void

We might as test kthread_should_stop(), although it's not very pointful at
present.

The code which starts this thread looks racy - the kernel could start multiple
threads.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix up some of the buildbreaks from the irq handler changes.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* git://git.infradead.org/~dhowells/irq-2.6:
  IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
  IRQ: Typedef the IRQ handler function type
  IRQ: Typedef the IRQ flow handler function type

The UDF filesystem can't be mounted in read-write mode any more,
because of forgotten braces.
Signed-off-by: NPeter Osterlund <petero2@telia.com>
[ Duh! ]
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Include linux/kallsyms.h unconditionally for print_symbol().
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6:
  [PATCH] i386: fix rwsem build bug on CONFIG_M386=y
  [PATCH] x86-64: Annotate interrupt frame backlink in interrupt handlers
  [PATCH] x86-64: Fix FPU corruption
  [PATCH] x86: Terminate the kernel stacks for the unwinder
  [PATCH] i386: Fix PCI BIOS config space access
  [PATCH] x86-64: Calgary IOMMU: print PCI bus numbers in hex
  [PATCH] x86-64: Calgary IOMMU: Update Jon's contact info
  [PATCH] x86-64: Calgary IOMMU: Fix off by one when calculating register space location
  [PATCH] x86-64: Calgary IOMMU: deobfuscate calgary_init
  [PATCH] i386: Update defconfig
  [PATCH] x86-64: Update defconfig

[ Manually skipped commits that incorrectly ignored AC in kernel space.
  The alignment fault is defined to only happen for CPL3 anyway  - Linus ]

commit 0181944f adds a
'extended_error_logging' global variable to qla2xxx which is defined by
qla4xxx too.

Trying to build both drivers results in the following error:

  LD      drivers/scsi/built-in.o
  drivers/scsi/qla4xxx/built-in.o: In function `qla4xxx_slave_configure':
  drivers/scsi/qla4xxx/ql4_os.c:1433: multiple definition of `extended_error_logging'
  drivers/scsi/qla2xxx/built-in.o:drivers/scsi/qla2xxx/qla_os.c:2166:
  first defined here
  make[2]: *** [drivers/scsi/built-in.o] Error 1
  make[1]: *** [drivers/scsi] Error 2
  make: *** [drivers] Error 2

The following patch simply adds a qla2_ (qla4_ respectively) prefix to
the variable name.
Signed-off-by: NFrederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

CONFIG_M386 turns on spinlock-based generic rwsems - which surprises the
semaphore.S rwsem stubs. Tested both with and without CONFIG_M386.
Reported-by: NKlaus Knopper <knopper@knopper.net>
Triaged-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndi Kleen <ak@suse.de>

Add correct CFI annotation to the backlink on top of the interrupt stack.
Signed-off-by: NAndi Kleen <ak@suse.de>

This reverts an earlier patch that was found to cause FPU
state corruption. I think the corruption happens because
unlazy_fpu() can cause FPU exceptions and when it happens
after the current switch some processing would affect
the state in the wrong process.

Thanks to  Douglas Crosher and Tom Hughes for testing.

Cc: jbeulich@novell.com
Signed-off-by: NAndi Kleen <ak@suse.de>

Always make sure RIP/EIP is 0 in the registers stored on the top
of the stack of a kernel thread. This makes sure the unwinder code
won't try a fallback but knows the stack has ended.

AK: this patch is a bit mysterious. in theory they should be terminated
anyways, but it seems to fix at least one crash. Anyways double termination
probably doesn't hurt.
Signed-off-by: NAndi Kleen <ak@suse.de>

Got broken by a earlier change.

Also add a printk when no pci config method could be found.

Cc: gregkh@suse.de
Signed-off-by: NAndi Kleen <ak@suse.de>

Make the references to the bus number in hex instead of decimal, as
that is the way that lspci prints out the bus numbers.
Signed-off-by: NJon Mason <jdmason@kudzu.us>
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Also add copyright for work done after leaving IBM.
Signed-off-by: NJon Mason <jdmason@kudzu.us>
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

The purpose of the code being modified is to determine the location
of the calgary chip address space.  This is done by a magical formula
of FE0MB-8MB*OneBasedChassisNumber+1MB*(RioNodeId-ChassisBase) to
find the offset where BIOS puts it.  In this formula,
OneBasedChassisNumber corresponds to the NUMA node, and rionodeid is
always 2 or 3 depending on which chip in the system it is.  The
problem was that we had an off by one error that caused us to account
some busses to the wrong chip and thus give them the wrong address
space.

Fixes RH bugzilla #203971.
Signed-off-by: NJon Mason <jdmason@kudzu.us>
Signed-off-bu: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

calgary_init's for loop does not correspond to the actual device being
checked, which makes its upperbound check for array overflow useless.
Changing this to a do-while loop is the correct way of doing this.
There should be no possibility of spinning forever in this loop, as
pci_get_device states that it will go through all iterations, then
return NULL (thus breaking the loop).
Signed-off-by: NJon Mason <jdmason@kudzu.us>
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NAndi Kleen <ak@suse.de>

Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)

Typedef the IRQ handler function type.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
(cherry picked from 1356d1e5fd256997e3d3dce0777ab787d0515c7a commit)

Typedef the IRQ flow handler function type.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
(cherry picked from 8e973fbdf5716b93a0a8c0365be33a31ca0fa351 commit)

Merge window closed..

There is a bug in the current version of the itmtouch USB touchscreen
driver.  The if statment that checks if pressure is being applied to the
touch screen is now missing a ! (not), so events are no longer being
reported correctly.

The original source code for this line was as follows:

	#define UCP(x) ((unsigned char*)(x))
	#define UCOM(x,y,z) ((UCP((x)->transfer_buffer)[y]) & (z))

	...
	if (!UCOM(urb, 7, 0x20)) {

And was cleaned to:

	unsigned char *data = urb->transfer_buffer;
	....
	 if (data[7] & 0x20) {

(note the lack of '!')

This has been tested on an LG L1510BF and an LG1510SF touch screen.
Signed-off-by: NMark Assad <massad@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* master.kernel.org:/pub/scm/linux/kernel/git/willy/parisc-2.6:
  [PA-RISC] Fix time.c for new do_timer() calling convention
  [PA-RISC] Fix must_check warnings in drivers.c
  [PA-RISC] Fix parisc_newuname()
  [PA-RISC] Remove warning from pci.c
  [PA-RISC] Fix filldir warnings
  [PA-RISC] Fix sys32_sysctl
  [PA-RISC] Fix sba_iommu compilation

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] cell: fix bugs found by sparse
  [POWERPC] spiderpic: enable new style devtree support
  [POWERPC] Update cell_defconfig
  [POWERPC] spufs: add infrastructure for finding elf objects
  [POWERPC] spufs: support new OF device tree format
  [POWERPC] spufs: add support for read/write on cntl
  [POWERPC] spufs: remove support for ancient firmware
  [POWERPC] spufs: make mailbox functions handle multiple elements
  [POWERPC] spufs: use correct pg_prot for mapping SPU local store
  [POWERPC] spufs: Add infrastructure needed for gang scheduling
  [POWERPC] spufs: implement error event delivery to user space
  [POWERPC] spufs: fix context switch during page fault
  [POWERPC] spufs: scheduler support for NUMA.
  [POWERPC] spufs: cell spu problem state mapping updates

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (54 commits)
  [SCSI] Initial Commit of qla4xxx
  [SCSI] raid class: handle component-add errors
  [SCSI] SCSI megaraid_sas: handle thrown errors
  [SCSI] SCSI aic94xx: handle sysfs errors
  [SCSI] SCSI st: fix error handling in module init, sysfs
  [SCSI] SCSI sd: fix module init/exit error handling
  [SCSI] SCSI osst: add error handling to module init, sysfs
  [SCSI] scsi: remove hosts.h
  [SCSI] scsi: Scsi_Cmnd convertion in aic7xxx_old.c
  [SCSI] megaraid_sas: sets ioctl timeout and updates version,changelog
  [SCSI] megaraid_sas: adds tasklet for cmd completion
  [SCSI] megaraid_sas: prints pending cmds before setting hw_crit_error
  [SCSI] megaraid_sas: function pointer for disable interrupt
  [SCSI] megaraid_sas: frame count optimization
  [SCSI] megaraid_sas: FW transition and q size changes
  [SCSI] qla2xxx: Update version number to 8.01.07-k2.
  [SCSI] qla2xxx: Stall mid-layer error handlers while rport is blocked.
  [SCSI] qla2xxx: Add MODULE_FIRMWARE tags.
  [SCSI] qla2xxx: Add support for host port state FC transport attribute.
  [SCSI] qla2xxx: Add support for fabric name FC transport attribute.
  ...