By moving sockmap_test from shell script into C we can run it directly
from selftests, but we can also push the input/output around in proper
structures.

However, keep the CLI options around because they are useful for
debugging when a paticular pattern of msghdr or sockmap options
trips up the sockmap code path.
Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Since test_sock_addr is not supposed to run by itself,
remove it from TEST_GEN_PROGS and add it to
TEST_GEN_PROGS_EXTENDED. This way, run_tests will
not run test_sock_addr. The corresponding test to run
is test_sock_addr.sh.
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Fixes: c0fa1b6c ("bpf: btf: Add BTF tests")
Signed-off-by: NAnders Roxell <anders.roxell@linaro.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Paul Chaignon says:

====================
Currently, helpers that expect ARG_PTR_TO_MAP_KEY and ARG_PTR_TO_MAP_VALUE
can only access stack and packet memory.  This patchset allows these
helpers to directly access map values by passing registers of type
PTR_TO_MAP_VALUE.

The first patch changes the verifier; the second adds new test cases.

The first three versions of this patchset were sent on the iovisor-dev
mailing list only.

Changelogs:
  Changes in v5:
    - Refactor using check_helper_mem_access.
  Changes in v4:
    - Rebase.
  Changes in v3:
    - Bug fixes.
    - Negative test cases.
  Changes in v2:
    - Additional test cases for adjusted maps.
====================
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This patch adds new test cases for accesses to map values from map
helpers.
Signed-off-by: NPaul Chaignon <paul.chaignon@orange.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Helpers that expect ARG_PTR_TO_MAP_KEY and ARG_PTR_TO_MAP_VALUE can only
access stack and packet memory.  Allow these helpers to directly access
map values by passing registers of type PTR_TO_MAP_VALUE.

This change removes the need for an extra copy to the stack when using a
map value to perform a second map lookup, as in the following:

struct bpf_map_def SEC("maps") infobyreq = {
    .type = BPF_MAP_TYPE_HASHMAP,
    .key_size = sizeof(struct request *),
    .value_size = sizeof(struct info_t),
    .max_entries = 1024,
};
struct bpf_map_def SEC("maps") counts = {
    .type = BPF_MAP_TYPE_HASHMAP,
    .key_size = sizeof(struct info_t),
    .value_size = sizeof(u64),
    .max_entries = 1024,
};
SEC("kprobe/blk_account_io_start")
int bpf_blk_account_io_start(struct pt_regs *ctx)
{
    struct info_t *info = bpf_map_lookup_elem(&infobyreq, &ctx->di);
    u64 *count = bpf_map_lookup_elem(&counts, info);
    (*count)++;
}
Signed-off-by: NPaul Chaignon <paul.chaignon@orange.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Eyal Birger says:

====================
This patchset adds support for fetching XFRM state information from
an eBPF program called from TC.

The first patch introduces a helper for fetching an XFRM state from the
skb's secpath. The XFRM state is modeled using a new virtual struct which
contains the SPI, peer address, and reqid values of the state; This struct
can be extended in the future to provide additional state information.

The second patch adds a test example in test_tunnel_bpf.sh. The sample
validates the correct extraction of state information by the eBPF program.

v3:
  - Kept SPI and peer IPv4 address in state in network byte order
    following suggestion from Alexei Starovoitov
v2:
  - Fixed two comments by Daniel Borkmann:
    - disallow reserved flags in helper call
    - avoid compiling in helper code when CONFIG_XFRM is off
====================
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Add a test for fetching xfrm state parameters from a tc program running
on ingress.
Signed-off-by: NEyal Birger <eyal.birger@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This commit introduces a helper which allows fetching xfrm state
parameters by eBPF programs attached to TC.

Prototype:
bpf_skb_get_xfrm_state(skb, index, xfrm_state, size, flags)

skb: pointer to skb
index: the index in the skb xfrm_state secpath array
xfrm_state: pointer to 'struct bpf_xfrm_state'
size: size of 'struct bpf_xfrm_state'
flags: reserved for future extensions

The helper returns 0 on success. Non zero if no xfrm state at the index
is found - or non exists at all.

struct bpf_xfrm_state currently includes the SPI, peer IPv4/IPv6
address and the reqid; it can be further extended by adding elements to
its end - indicating the populated fields by the 'size' argument -
keeping backwards compatibility.

Typical usage:

struct bpf_xfrm_state x = {};
bpf_skb_get_xfrm_state(skb, 0, &x, sizeof(x), 0);
...
Signed-off-by: NEyal Birger <eyal.birger@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This patch cleans up btf.h in uapi:
1) Rename "name" to "name_off" to better reflect it is an offset to the
   string section instead of a char array.
2) Remove unused value BTF_FLAGS_COMPR and BTF_MAGIC_SWAP
Suggested-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

In commit 6870de43 ("bpf: make virtio compatible w/
bpf_xdp_adjust_tail") i didn't account for vi->hdr_len during new
packet's length calculation after bpf_prog_run in receive_mergeable.
because of this all packets, if they were passed to the kernel,
were truncated by 12 bytes.

Fixes:6870de43 ("bpf: make virtio compatible w/ bpf_xdp_adjust_tail")
Reported-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NNikita V. Shirokov <tehnerd@tehnerd.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

The conversion of rndis friendly name to utf8 uses a standard
kernel routine which is optional in config. Therefore build
would fail for some configurations. Resolve by selecting needed
library.

Fixes: 0fe554a4 ("hv_netvsc: propogate Hyper-V friendly name into interface alias")
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Conflicts were simple overlapping changes in microchip
driver.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

David Ahern says:

====================
net/ipv6: Another followup to the fib6_info change

Last one - for this week.

Patches 1, 2 and 7 are more cleanup patches - removing dead code,
moving code from a header to near its single caller, and updating
function name.

Patches 3-5 do some refactoring leading up to patch 6 which fixes
a NULL dereference. I have only managed to trigger a panic once, so
I can not definitively confirm it addresses the problem but it seems
pretty clear that it is a race on removing a 'from' reference on
an rt6_info and another path using that 'from' value to do
cookie checking.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Dan reported an imbalance in fib6_check on use of f6i and checking
whether it is null. Since fib6_check is only called if f6i is non-null,
remove the unnecessary check.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a dst entry is created from a fib entry, the 'from' in rt6_info
is set to the fib entry. The 'from' reference is used most notably for
cookie checking - making sure stale dst entries are updated if the
fib entry is changed.

When a fib entry is deleted, the pcpu routes on it are walked releasing
the fib6_info reference. This is needed for the fib6_info cleanup to
happen and to make sure all device references are released in a timely
manner.

There is a race window when a FIB entry is deleted and the 'from' on the
pcpu route is dropped and the pcpu route hits a cookie check. Handle
this race using rcu on from.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Code move only; no functional change intended.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A later patch protects 'from' in rt6_info and this simplifies the
locking needed by it.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A later patch protects 'from' in rt6_info and this simplifies the
locking needed by it.

With the move, the fib6_info_hold for the uncached_rt is no longer
needed since the rcu_lock is still held.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

rt6_get_cookie_safe takes a fib6_info and checks the sernum of
the node. Update the name to reflect its purpose.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

rt6_clean_expires and rt6_set_expires are no longer used. Removed them.
rt6_update_expires has 1 caller in route.c, so move it from the header.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-04-21

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Initial work on BPF Type Format (BTF) is added, which is a meta
   data format which describes the data types of BPF programs / maps.
   BTF has its roots from CTF (Compact C-Type format) with a number
   of changes to it. First use case is to provide a generic pretty
   print capability for BPF maps inspection, later work will also
   add BTF to bpftool. pahole support to convert dwarf to BTF will
   be upstreamed as well (https://github.com/iamkafai/pahole/tree/btf),
   from Martin.

2) Add a new xdp_bpf_adjust_tail() BPF helper for XDP that allows
   for changing the data_end pointer. Only shrinking is currently
   supported which helps for crafting ICMP control messages. Minor
   changes in drivers have been added where needed so they recalc
   the packet's length also when data_end was adjusted, from Nikita.

3) Improve bpftool to make it easier to feed hex bytes via cmdline
   for map operations, from Quentin.

4) Add support for various missing BPF prog types and attach types
   that have been added to kernel recently but neither to bpftool
   nor libbpf yet. Doc and bash completion updates have been added
   as well for bpftool, from Andrey.

5) Proper fix for avoiding to leak info stored in frame data on page
   reuse for the two bpf_xdp_adjust_{head,meta} helpers by disallowing
   to move the pointers into struct xdp_frame area, from Jesper.

6) Follow-up compile fix from BTF in order to include stdbool.h in
   libbpf, from Björn.

7) Few fixes in BPF sample code, that is, a typo on the netdevice
   in a comment and fixup proper dump of XDP action code in the
   tracepoint exception, from Wang and Jesper.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull thermal fixes from Eduardo Valentin:
 "A couple of fixes for the thermal subsystem"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  dt-bindings: thermal: Remove "cooling-{min|max}-level" properties
  dt-bindings: thermal: remove no longer needed samsung thermal properties

Pull MMC fixes from Ulf Hansson:
 "A couple of MMC host fixes:

   - sdhci-pci: Fixup tuning for AMD for eMMC HS200 mode

   - renesas_sdhi_internal_dmac: Avoid data corruption by limiting
     DMA RX"

* tag 'mmc-v4.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: renesas_sdhi_internal_dmac: limit DMA RX for old SoCs
  mmc: sdhci-pci: Only do AMD tuning for HS200

Pull MD fixes from Shaohua Li:
 "Three small fixes for MD:

   - md-cluster fix for faulty device from Guoqing

   - writehint fix for writebehind IO for raid1 from Mariusz

   - a live lock fix for interrupted recovery from Yufen"

* tag 'md/4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  raid1: copy write hint from master bio to behind bio
  md/raid1: exit sync request if MD_RECOVERY_INTR is set
  md-cluster: don't update recovery_offset for faulty device

In do_mount() when the MS_* flags are being converted to MNT_* flags,
MS_RDONLY got accidentally convered to SB_RDONLY.

Undo this change.

Fixes: e462ec50 ("VFS: Differentiate mount flags (MS_*) from internal superblock flags")
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

AFS server records get removed from the net->fs_servers tree when
they're deleted, but not from the net->fs_addresses{4,6} lists, which
can lead to an oops in afs_find_server() when a server record has been
removed, for instance during rmmod.

Fix this by deleting the record from the by-address lists before posting
it for RCU destruction.

The reason this hasn't been noticed before is that the fileserver keeps
probing the local cache manager, thereby keeping the service record
alive, so the oops would only happen when a fileserver eventually gets
bored and stops pinging or if the module gets rmmod'd and a call comes
in from the fileserver during the window between the server records
being destroyed and the socket being closed.

The oops looks something like:

  BUG: unable to handle kernel NULL pointer dereference at 000000000000001c
  ...
  Workqueue: kafsd afs_process_async_call [kafs]
  RIP: 0010:afs_find_server+0x271/0x36f [kafs]
  ...
  Call Trace:
   afs_deliver_cb_init_call_back_state3+0x1f2/0x21f [kafs]
   afs_deliver_to_call+0x1ee/0x5e8 [kafs]
   afs_process_async_call+0x5b/0xd0 [kafs]
   process_one_work+0x2c2/0x504
   worker_thread+0x1d4/0x2ac
   kthread+0x11f/0x127
   ret_from_fork+0x24/0x30

Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:

 1) Unbalanced refcounting in TIPC, from Jon Maloy.

 2) Only allow TCP_MD5SIG to be set on sockets in close or listen state.
    Once the connection is established it makes no sense to change this.
    From Eric Dumazet.

 3) Missing attribute validation in neigh_dump_table(), also from Eric
    Dumazet.

 4) Fix address comparisons in SCTP, from Xin Long.

 5) Neigh proxy table clearing can deadlock, from Wolfgang Bumiller.

 6) Fix tunnel refcounting in l2tp, from Guillaume Nault.

 7) Fix double list insert in team driver, from Paolo Abeni.

 8) af_vsock.ko module was accidently made unremovable, from Stefan
    Hajnoczi.

 9) Fix reference to freed llc_sap object in llc stack, from Cong Wang.

10) Don't assume netdevice struct is DMA'able memory in virtio_net
    driver, from Michael S. Tsirkin.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits)
  net/smc: fix shutdown in state SMC_LISTEN
  bnxt_en: Fix memory fault in bnxt_ethtool_init()
  virtio_net: sparse annotation fix
  virtio_net: fix adding vids on big-endian
  virtio_net: split out ctrl buffer
  net: hns: Avoid action name truncation
  docs: ip-sysctl.txt: fix name of some ipv6 variables
  vmxnet3: fix incorrect dereference when rxvlan is disabled
  llc: hold llc_sap before release_sock()
  MAINTAINERS: Direct networking documentation changes to netdev
  atm: iphase: fix spelling mistake: "Tansmit" -> "Transmit"
  net: qmi_wwan: add Wistron Neweb D19Q1
  net: caif: fix spelling mistake "UKNOWN" -> "UNKNOWN"
  net: stmmac: Disable ACS Feature for GMAC >= 4
  net: mvpp2: Fix DMA address mask size
  net: change the comment of dev_mc_init
  net: qualcomm: rmnet: Fix warning seen with fill_info
  tun: fix vlan packet truncation
  tipc: fix infinite loop when dumping link monitor summary
  tipc: fix use-after-free in tipc_nametbl_stop
  ...

Pull vfs fixes from Al Viro:
 "Assorted fixes.

  Some of that is only a matter with fault injection (broken handling of
  small allocation failure in various mount-related places), but the
  last one is a root-triggerable stack overflow, and combined with
  userns it gets really nasty ;-/"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Don't leak MNT_INTERNAL away from internal mounts
  mm,vmscan: Allow preallocating memory for register_shrinker().
  rpc_pipefs: fix double-dput()
  orangefs_kill_sb(): deal with allocation failures
  jffs2_kill_sb(): deal with failed allocations
  hypfs_kill_super(): deal with failed allocations

Merge tag 'ecryptfs-4.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs

Pull eCryptfs fixes from Tyler Hicks:
 "Minor cleanups and a bug fix to completely ignore unencrypted
  filenames in the lower filesystem when filename encryption is enabled
  at the eCryptfs layer"

* tag 'ecryptfs-4.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
  eCryptfs: don't pass up plaintext names when using filename encryption
  ecryptfs: fix spelling mistake: "cadidate" -> "candidate"
  ecryptfs: lookup: Don't check if mount_crypt_stat is NULL

 - isofs memory leak fix

 - two fsnotify fixes of event mask handling

 - udf fix of UTF-16 handling

 - couple other smaller cleanups

* tag 'for_v4.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Fix leak of UTF-16 surrogates into encoded strings
  fs: ext2: Adding new return type vm_fault_t
  isofs: fix potential memory leak in mount option parsing
  MAINTAINERS: add an entry for FSNOTIFY infrastructure
  fsnotify: fix typo in a comment about mark->g_list
  fsnotify: fix ignore mask logic in send_to_group()
  isofs compress: Remove VLA usage
  fs: quota: Replace GFP_ATOMIC with GFP_KERNEL in dquot_init
  fanotify: fix logic of events on child

Pull HID updates from Jiri Kosina:

 - suspend/resume handling fix for Raydium I2C-connected touchscreen
   from Aaron Ma

 - protocol fixup for certain BT-connected Wacoms from Aaron Armstrong
   Skomra

 - battery level reporting fix on BT-connected mice from Dmitry Torokhov

 - hidraw race condition fix from Rodrigo Rivas Costa

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: i2c-hid: fix inverted return value from i2c_hid_command()
  HID: i2c-hid: Fix resume issue on Raydium touchscreen device
  HID: wacom: bluetooth: send exit report for recent Bluetooth devices
  HID: hidraw: Fix crash on HIDIOCGFEATURE with a destroyed device
  HID: input: fix battery level reporting on BT mice

Pull livepatching fix from Jiri Kosina:
 "Shadow variable API list_head initialization fix from Petr Mladek"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  livepatch: Allow to call a custom callback when freeing shadow variables
  livepatch: Initialize shadow variables safely by a custom callback

Currently, the tun driver, in absence of an eBPF steering program,
always compute the rxhash in its rx path, even when such value
is later unused due to additional checks (

This changeset moves the all the related checks just before the
__skb_get_hash_symmetric(), so that the latter is no more computed
when unneeded.

Also replace an unneeded RCU section with rcu_access_pointer().
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to dump lan78xx family registers using ethtool, add
support at lan78xx driver level.
Signed-off-by: NRaghuram Chary J <raghuramchary.jallipalli@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Phil Elwell says:

====================
lan78xx: Read configuration from Device Tree

The Microchip LAN78XX family of devices are Ethernet controllers with
a USB interface. Despite being discoverable devices it can be useful to
be able to configure them from Device Tree, particularly in low-cost
applications without an EEPROM or programmed OTP.

This patch set adds support for reading the MAC address and LED modes from
Device Tree.

v4:
- Rename nodes in bindings doc.

v3:
- Move LED setting into PHY driver.

v2:
- Use eth_platform_get_mac_address.
- Support up to 4 LEDs, and move LED mode constants into dt-bindings header.
- Improve bindings document.
- Remove EEE support.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Microchip LAN78XX family of devices are Ethernet controllers with
a USB interface. Despite being discoverable devices it can be useful to
be able to configure them from Device Tree, particularly in low-cost
applications without an EEPROM or programmed OTP.

Document the supported properties in a bindings file.
Signed-off-by: NPhil Elwell <phil@raspberrypi.org>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for DT property "microchip,led-modes", a vector of zero
to four cells (u32s) in the range 0-15, each of which sets the mode
for one of the LEDs. Some possible values are:

    0=link/activity          1=link1000/activity
    2=link100/activity       3=link10/activity
    4=link100/1000/activity  5=link10/1000/activity
    6=link10/100/activity    14=off    15=on

These values are given symbolic constants in a dt-bindings header.

Also use the presence of the DT property to indicate that the
LEDs should be enabled - necessary in the event that no valid OTP
or EEPROM is available.
Signed-off-by: NPhil Elwell <phil@raspberrypi.org>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a standard mechanism for locating and using a MAC address from
the Device Tree. Use this facility in the lan78xx driver to support
applications without programmed EEPROM or OTP. At the same time,
regularise the handling of the different address sources.
Signed-off-by: NPhil Elwell <phil@raspberrypi.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use cpumask_local_spread to provide interrupt affinity hints
for each queue. This will spread interrupts across NUMA local
CPUs first, extending to remote nodes if needed.
Signed-off-by: NBert Kenward <bkenward@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>