Signed-off-by: NDavid Mackey <tdmackey@twitter.com>
Signed-off-by: NVinson Lee <vlee@twitter.com>
Acked-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

These const tables are currently marked __devinitdata, but
Documentation/PCI/pci.txt says:

"o The ID table array should be marked __devinitconst; this is done
automatically if the table is declared with DEFINE_PCI_DEVICE_TABLE()."

So use DEFINE_PCI_DEVICE_TABLE(x).

Based on PaX and earlier work by Andi Kleen.
Signed-off-by: NLionel Debroux <lionel_debroux@yahoo.fr>
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

No functionality change, this is done so that in a follow-on patch all
queued-up MCEs can be decoded after registering on the chain.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

on i386:
	ERROR: "__udivdi3" [drivers/edac/i7core_edac.ko] undefined!\

In both get_sdram_scrub_rate() and set_sdram_scrub_rate()
Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Get a more reliable DCLK value from DMI, name the SCRUBINTERVAL mask
and guard against potential overflow in the scrub rate computations.
Signed-off-by: NNils Carlson <nils.carlson@ericsson.com>

Nehalem-EX uses a different memory controller. However, as the
memory controller is not visible on some Nehalem/Nehalem-EP, we
need to indirectly probe via a X58 PCI device. The same devices
are found on (some) Nehalem-EX. So, on those machines, the
probe routine needs to return -ENODEV, as the actual Memory
Controller registers won't be detected.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove edac_mce pieces and use the normal MCE decoder notifier chain by
retaining the same functionality with considerably less code.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

mce->socketid and cpu_data(mce->cpu).phys_proc_id are the same,
compare with mce_setup (in mce.c):
	m->cpu = m->extcpu = smp_processor_id();
        ...
	m->socketid = cpu_data(m->extcpu).phys_proc_id;

This makes it easier for example for XEN patches to hook into
the MCE subsystem.
Compile tested on x86_64.
Signed-off-by: NThomas Renninger <trenn@suse.de>
CC: JBeulich@novell.com
CC: linux-edac@vger.kernel.org
CC: Mauro Carvalho Chehab <mchehab@redhat.com>

Xeon 35xx doesn't mention memory scrub. It seems that only Xeon 55xx
and above supports it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add scrubbing support to i7core_edac, tested on intel Xeon L5638.
Signed-off-by: NSamuel Gabrielsson <samuel.gabrielsson@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Error injection needs the pci device 0:0. So, we need to revert
this changeset: 79daef20.

Tests need to be made to be sure that refcount won't be wrong
as noticed before.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

CC: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Based on a patch from the PaX Team, found during a clang analysis pass.
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Cc: PaX Team <pageexec@freemail.hu>
Cc: stable@kernel.org [v2.6.35+]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The kernel already prints its build timestamp during boot, no need to
repeat it in random drivers and produce different object files each
time.

Cc: Doug Thompson <dougthompson@xmission.com>
Cc: bluesmoke-devel@lists.sourceforge.net
Cc: linux-edac@vger.kernel.org
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>

Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Due to the nature of i7core, we need to probe and attach all PCI
devices used by this driver during the first time probe is called.
However, PCI core will call the probe routine one time for each CPU
socket. If we return -EINVAL to those calls, it would seem that the
driver fails, when, in fact, there's no more devices left to initialize.

Changing the return code to -ENODEV solves this issue.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

At pci_xeon_fixup(), it waits for a null-terminated table, while at
i7core_get_all_devices, it just do a for 0..ARRAY_SIZE. As other tables
are zero-terminated, change it to be terminate with 0 as well, and fixes
a bug where it may be running out of the table elements.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

That's a nasty bug that took me a lot of time to track, and whose
solution took just one line to solve. The best fragrances and the worse
poisons are shipped on the smalest bottles.

The drivers/pci/quick.c implements the pci_get_device function. The normal
behavior is that you call it, the function returns you a pdev pointer
and increment pdev->kobj.kref.refcount of the pci device. However,
if you want to keep searching an object, you need to pass the previous
pdev function to the search.

When you use a not null pointer to pdev "from" field, pci_get_device
will decrement pdev->kobj.kref.refcount, assuming that the driver won't
be using the previous pdev.

The solution is simple: we just need to call pci_dev_get() manually,
for the pdev's that the driver will actually use.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Probably due to a bug or some testing logic at PCI level, device
refcount for <bus>:00.0 device is decremented at the end of the
pci_get_device, made by i7core_get_all_devices(). The fact is that
the first versions of the driver relied on those devices to probe
for Nehalem, but the current versions don't use it at all.

So, let's just remove those devices from the driver, making it simpler
and fixing the bug.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

i7core_unregister_mci() checks internally when mci=NULL. There's no
need to test it outside.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

changeset c91d57ba9ce5b5c93a7077e2f72510eb1f9131c4 moved the init
of the priv pointer to the end of the probe routine. However, we need
them before that, otherwise, we hit an OOPS:

[   67.743453] EDAC DEBUG: mci_bind_devs: Associated fn 0.0, dev = ffff88011b46e000, socket 0
[   67.751861] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
[   67.759685] IP: [<ffffffffa017e484>] i7core_probe+0x979/0x130c [i7core_edac]
[   67.766721] PGD 10bd38067 PUD 10bd37067 PMD 0
[   67.771178] Oops: 0000 [#1] SMP
[   67.774414] last sysfs file: /sys/devices/system/cpu/cpu1/cache/index2/shared_cpu_map
[   67.782213] CPU 1
[   67.784042] Modules linked in: i7core_edac(+) edac_core cpufreq_ondemand binfmt_misc dm_multipath video output pci_slot snd_hda_codd
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

A local is enough.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

We can check the number of channels in i7core_register_mci.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

In i7core_probe, when setup of mci for 2nd or later socket failed,
we should cleanup prepared mci for 1st socket or so before "put" of
all devices.

So let have i7core_unregister_mci that can be shared between here
and i7core_remove.

While here fix a typo "hanler".
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

We already have saved pointers.  Use shorter ones.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Prevent i7core_remove from running multiple times.
Otherwise value proved will be negative and something will be wrong.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Release resources properly.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The flag is_registered is not initialized until mci_bind_devs()
is called.  Refer it properly.

The mci->dev and mci->edac_check is required in edac_mc_add_mc(),
so prepare them just before the call.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

We already do 'get' for all sockets at once. So do 'put' in the
same way.

And let args of the 'get' function to void since it handles
only the single, static and known size table pci_dev_table[].
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Have a couple of method.
while here sort out lines in the i7core_register_mci() a bit.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Have a method to make a couple with alloc_i7core_dev() previously
introduced.  Using in pair will help proper resource handling.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

It's nice to have a method for a single purpose.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Since we need to pass the index of the entry, pass the table itself
instead of passing individual members of the table.

While here make it static.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

commit 47251b4d960bdfa648b0d06dbc6d445f41cb3906 have changed
the logic for unexplained reasons.  It looks strange that it
can release i7core_dev without calling i7core_put_devices()
that releases i7core_dev->pdev.

Fix the part.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The legacy PCI probe sometimes cause hangs. Better to have it
disabled by default, and have a parameter to enable it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>