If current IO cannot be completed due to some transient errors,
LD may want to ask generic layer to resend the request through
pnfs again.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <loghyr@primarydata.com>

Pass ds_commit_idx through the nfs commit path. It's used to select
the commit bucket when using pnfs and is ignored when not using pnfs.
Several functions had to be changed: nfs_retry_commit,
nfs_mark_request_commit, pnfs_mark_request_commit and the pnfs layout
driver .mark_request_commit functions.
Signed-off-by: NTom Haynes <loghyr@primarydata.com>

This is needed to support mirrored writes - the first write can't just
trash the lseg, we need to keep it around until all mirrors have
written.
Signed-off-by: NWeston Andros Adamson <dros@primarydata.com>

And if we are to return the same type of layouts, don't bother
sending more layoutgets.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

It marks all matching layout segments as NFS_LSEG_LAYOUTRETURN,
which is an indicator for pnfs_put_lseg() to send layoutreturn,
and also prevents pnfs_update_layout() from using the returning
segments. Once it is set, it never gets cleared.

It also sets proper io failure bit so that pnfs path can be retried
after PNFS_LAYOUTGET_RETRY_TIMEOUT second.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

Per RFC 5661 Errata 3208:
| A client MAY always forget its layout state and associated
| layout stateid at any time (See also section 12.5.5.1).
| In such case, the client MUST use a non-layout stateid for the next
| LAYOUTGET operation. This will signal the server that the client has
| no more layouts on the file and its respective layout state can be
| released before issuing a new layout in response to LAYOUTGET.

In order to make such a signal unique to server, client needs to serialize
all layoutgets using non-layout stateid. We implement this by serializing
layoutgets when client has no layout segments at hand.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

flexfile layout may need to set such when making DS connections.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

They can be reused by flexfile layout as well.

Also add a code such that if read fails on one DS and
there are other DSes available to use, don't resend
through MDS but through pNFS so that client can read
from other DSes.
Reviewed-by: NJeff Layton <jlayton@primarydata.com>
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

flexfile layout may use different auth flavor as specified by MDS.
Reviewed-by: NJeff Layton <jlayton@primarydata.com>
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

It can be reused by flexfiles layout client.
Reviewed-by: NJeff Layton <jlayton@primarydata.com>
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

It can be reused by flexfile layout.
Reviewed-by: NJeff Layton <jlayton@primarydata.com>
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

Also pull nfs4_pnfs_ds_addr and nfs4_pnfs_ds to generic pnfs.

They can all be reused by flexfile layout as well.
Reviewed-by: NJeff Layton <jlayton@primarydata.com>
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

Acked-by: NJeff Layton <jlayton@primarydata.com>
Signed-off-by: NTom Haynes <loghyr@primarydata.com>

The flexfilelayout driver will share some common code
with the filelayout driver. This set of changes refactors
that common code out to avoid any module depenencies.
Signed-off-by: NTom Haynes <loghyr@primarydata.com>

You cannot call pnfs_put_lseg_async() more than once per lseg, so it
is really an inappropriate way to deal with a refcount issue.

Instead, replace it with a function that decrements the refcount, and
puts the final 'free' operation (which is incompatible with locks) on
the workqueue.

Cc: Weston Andros Adamson <dros@primarydata.com>
Fixes: e6cf82d1: pnfs: add pnfs_put_lseg_async
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

nfs4_insert_deviceid_node() was removed in 661373b1Signed-off-by: NTom Haynes <loghyr@primarydata.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Both blocks layout and objects layout want to use it to avoid CB_LAYOUTRECALL
but that should only happen if client is doing truncation to a smaller size.
For other cases, we let server decide if it wants to recall client's layouts.
Change PNFS_LAYOUTRET_ON_SETATTR to follow the logic and not to send
layoutreturn unnecessarily.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Boaz Harrosh <boaz@plexistor.com>
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

The current GETDEVICELIST implementation is buggy in that it doesn't handle
cursors correctly, and in that it returns an error if the server returns
NFSERR_NOTSUPP.  Given that there is no actual need for GETDEVICELIST,
it has various issues and might get removed for NFSv4.2 stop using it in
the blocklayout driver, and thus the Linux NFS client as whole.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

This will be used by the block layout driver when splitting extents.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

At a simple helper to issue a GETDEVICELIST operation and pre-load
the device id cache based on the result.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Add support to the common pNFS core to issue GETDEVICEINFO calls on
a device ID cache miss.  The code is taken from the well debugged
file layout implementation and calls out to the layoutdriver through
a new alloc_deviceid_node method.  The calling conventions for
nfs4_find_get_deviceid are changed so that all information needed to
send a GETDEVICEINFO request is passed to the common code.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

If a layout driver keeps per-inode state outside of the layout segments it
needs to be notified of any layout returns or recalls on an inode, and not
just about the freeing of layout segments.  Add a method to acomplish this,
which will allow the block layout driver to handle the case of truncated
and re-expanded files properly.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Like all block based filesystems, the pNFS block layout driver can't read
or write at a byte granularity and thus has to perform read-modify-write
cycles on writes smaller than this granularity.

Add a flag so that the core NFS code always reads a whole page when
starting a smaller write, so that we can do it in the place where the VFS
expects it instead of doing in very deadlock prone way in the writeback
handler.

Note that in theory we could do less than page size reads here for disks
that have a smaller sector size which are served by a server with a smaller
pnfs block size.  But so far that doesn't seem like a worthwhile
optimization.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Currently there is no XDR buffer space allocated for the per-layout driver
layoutcommit payload, which leads to server buffer overflows in the
blocklayout driver even under simple workloads.  As we can't do per-layout
sizes for XDR operations we'll have to splice a previously encoded list
of pages into the XDR stream, similar to how we handle ACL buffers.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

After we issued a layoutreturn operations the may free the layout stateid
and will thus cause bad stateid error when the client uses it again.

We currently try to avoid this case by chosing the open stateid if not
lsegs are present for this inode.  But various places can hold refererence
on lsegs and thus cause the list not to be empty shortly after a layout
return.  Add an explicit flag to mark the current layout stateid invalid
and force usage of the openstateid after we did a full file layoutreturn.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Track lwb in nfs_commit_data so that we can use it to setup
layoutcommit in commit_done callback.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

This is useful when lsegs need to be released while holding locks.
Signed-off-by: NWeston Andros Adamson <dros@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

nfs_page_find_head_request_locked looks through the regular nfs commit lists
when the page is swapped out, but doesn't look through the pnfs commit lists.

I'm not sure if anyone has hit any issues caused by this.
Suggested-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NWeston Andros Adamson <dros@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Clean up pnfs_read_done_resend_to_mds and pnfs_write_done_resend_to_mds:
 - instead of passing all arguments from a nfs_pgio_header, just pass the header
 - share the common code
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NWeston Andros Adamson <dros@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

struct nfs_pgio_data only exists as a member of nfs_pgio_header, but is
passed around everywhere, because there used to be multiple _data structs
per _header. Many of these functions then use the _data to find a pointer
to the _header.  This patch cleans this up by merging the nfs_pgio_data
structure into nfs_pgio_header and passing nfs_pgio_header around instead.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NWeston Andros Adamson <dros@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

This is a step toward allowing pg_test to inform the the
coalescing code to reduce the size of requests so they may fit in
whatever scheme the pg_test callback wants to define.

For now, just return the size of the request if there is space, or 0
if there is not.  This shouldn't change any behavior as it acts
the same as when the pg_test functions returned bool.
Signed-off-by: NWeston Andros Adamson <dros@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

At this point, the only difference between nfs_read_data and
nfs_write_data is the write verifier.
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

The read_pageio_init method is just a very convoluted way to grab the
right nfs_pageio_ops vector.  The vector to chose is not a choice of
protocol version, but just a pNFS vs MDS I/O choice that can simply be
done inside nfs_pageio_init_read based on the presence of a layout
driver, and a new force_mds flag to the special case of falling back
to MDS I/O on a pNFS-capable volume.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

The write_pageio_init method is just a very convoluted way to grab the
right nfs_pageio_ops vector.  The vector to chose is not a choice of
protocol version, but just a pNFS vs MDS I/O choice that can simply be
done inside nfs_pageio_init_write based on the presence of a layout
driver, and a new force_mds flag to the special case of falling back
to MDS I/O on a pNFS-capable volume.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Mostly scripted conversion of the smp_mb__* barriers.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

If a LAYOUTCOMMIT is outstanding, then chances are that the metadata
server may still be returning incorrect values for the change attribute,
ctime, mtime and/or size.
Just ignore those attributes for now, and wait for the LAYOUTCOMMIT
rpc call to finish.
Reported-by: Nshaobingqing <shaobingqing@bwstor.com.cn>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

The GETDEVICEINFO gdia_maxcount represents all of the data being returned
within the GETDEVICEINFO4resok structure and includes the XDR overhead.

The CREATE_SESSION ca_maxresponsesize is the maximum reply and includes the RPC
headers (including security flavor credentials and verifiers).

Split out the struct pnfs_device field maxcount which is the gdia_maxcount
from the pglen field which is the reply (the total) buffer length.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This is not strictly needed, since get_deviceinfo is not allowed to
return NFS4ERR_ACCESS or NFS4ERR_WRONG_CRED, but lets do it anyway
for consistency with other pNFS operations.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In order to be able to safely return the layout in nfs4_proc_setattr,
we need to block new uses of the layout, wait for all outstanding
users of the layout to complete, commit the layout and then return it.

This patch adds a helper in order to do all this safely.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>