to #28736503

commit c11368a57be460de889696f6ff8815fbcacf4db2 upstream

req->flags stores all sqe->flags. After checking that sqe->flags are
valid set if IOSQE* flags, no need to double check it, just forward them
all.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 9f13c35b33fddb186beab9ef21c555a01e45f4d7 upstream

io_file_put() deals with flushing state's file refs, adding "state" to
its name makes it a bit clearer. Also, avoid double check of
state->file in __io_file_get() in some cases.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 3bfa5bcb26f0b52d7ae8416aa0618fff21aceaaf upstream

We only need apoll in the one section, do the juggling with the work
restoration there. This removes a special case further down as well.

No functional changes in this patch.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 7d01bd745a8f52ff2883f661235139ab6e7d23e6 upstream

The "struct io_submit_state *state" parameter is not used, remove it.
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #28612342

commit f9f05395f384ee858520b6c65d7e3e436af20c53 upstream

If the GHES notification type is SDEI, register the provided event
using the SDEI-GHES helper.

SDEI may be one of two types of event, normal and critical. Critical
events can interrupt normal events, so these must have separate
fixmap slots and locks in case both event types are in use.
Signed-off-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28612342

commit f96935d3bc38a5f4b5188b6470a10e3fb8c3f0cc upstream

APEI's Generic Hardware Error Source structures do not describe
whether the SDEI event is shared or private, as this information is
discoverable via the API.

GHES needs to know whether an event is normal or critical to avoid
sharing locks or fixmap entries, but GHES shouldn't have to know about
the SDEI API.

Add a helper to register the GHES using the appropriate normal or
critical callback.
Signed-off-by: NJames Morse <james.morse@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28612342

commit 8fcc4ae6faf8b455eeef00bc9ae70744e3b0f462 upstream

APEI is unable to do all of its error handling work in nmi-context, so
it defers non-fatal work onto the irq_work queue. arch_irq_work_raise()
sends an IPI to the calling cpu, but this is not guaranteed to be taken
before returning to user-space.

Unless the exception interrupted a context with irqs-masked,
irq_work_run() can run immediately. Otherwise return -EINPROGRESS to
indicate ghes_notify_sea() found some work to do, but it hasn't
finished yet.

With this apei_claim_sea() returning '0' means this external-abort was
also notification of a firmware-first RAS error, and that APEI has
processed the CPER records.
Signed-off-by: NJames Morse <james.morse@arm.com>
Tested-by: NTyler Baicar <baicar@os.amperecomputing.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28612342

commit 7f17b4a121d0d50eca22cb1edebf0a157f3e43bf upstream

memory_failure() offlines or repairs pages of memory that have been
discovered to be corrupt. These may be detected by an external
component, (e.g. the memory controller), and notified via an IRQ.
In this case the work is queued as not all of memory_failure()s work
can happen in IRQ context.

If the error was detected as a result of user-space accessing a
corrupt memory location the CPU may take an abort instead. On arm64
this is a 'synchronous external abort', and on a firmware first
system it is replayed using NOTIFY_SEA.

This notification has NMI like properties, (it can interrupt
IRQ-masked code), so the memory_failure() work is queued. If we
return to user-space before the queued memory_failure() work is
processed, we will take the fault again. This loop may cause platform
firmware to exceed some threshold and reboot when Linux could have
recovered from this error.

For NMIlike notifications keep track of whether memory_failure() work
was queued, and make task_work pending to flush out the queue.
To save memory allocations, the task_work is allocated as part of
the ghes_estatus_node, and free()ing it back to the pool is deferred.
Signed-off-by: NJames Morse <james.morse@arm.com>
Tested-by: NTyler Baicar <baicar@os.amperecomputing.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28612342

commit 062022315e8ad9e0628515dfc756ab54b5fdb26b upstream

The GHES code calls memory_failure_queue() from IRQ context to schedule
work on the current CPU so that memory_failure() can sleep.

For synchronous memory errors the arch code needs to know any signals
that memory_failure() will trigger are pending before it returns to
user-space, possibly when exiting from the IRQ.

Add a helper to kick the memory failure queue, to ensure the scheduled
work has happened. This has to be called from process context, so may
have been migrated from the original cpu. Pass the cpu the work was
queued on.

Change memory_failure_work_func() to permit being called on the 'wrong'
cpu.
Signed-off-by: NJames Morse <james.morse@arm.com>
Tested-by: NTyler Baicar <baicar@os.amperecomputing.com>
Acked-by: NNaoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28612342

commit b972d2eaf0c7021579755eec6b2b79e0f5bc7930 upstream

Now that ghes notification helpers provide the fixmap slots and
take the lock themselves, multiple NMI-like notifications can
be used on arm64.

These should be named after their notification method as they can't
all be called 'NMI'. x86's NOTIFY_NMI already is, change the SEA
fixmap entry to be called FIX_APEI_GHES_SEA.

Future patches can add support for FIX_APEI_GHES_SEI and
FIX_APEI_GHES_SDEI_{NORMAL,CRITICAL}.

Because all of ghes.c builds on both architectures, provide a
constant for each fixmap entry that the architecture will never
use.
Signed-off-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28612342

commit d9f608dc156487b55cb17c2ec591b06e53a6de64 upstream

Each struct ghes has an worst-case sized buffer for storing the
estatus. If an error is being processed by ghes_proc() in process
context this buffer will be in use. If the error source then triggers
an NMI-like notification, the same buffer will be used by
in_nmi_queue_one_entry() to stage the estatus data, before
__process_error() copys it into a queued estatus entry.

Merge __process_error()s work into in_nmi_queue_one_entry() so that
the queued estatus entry is used from the beginning. Use the new
ghes_peek_estatus() to know how much memory to allocate from
the ghes_estatus_pool before reading the records.
Reported-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NJames Morse <james.morse@arm.com>
Reviewed-by: NBorislav Petkov <bp@suse.de>

Change since v6:
 * Added a comment explaining the 'ack-error, then goto no_work'.
 * Added missing esatus-clearing, which is necessary after reading the GAS,
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28612342

commit e00a6e3392cb623b7ac4d61c5e1c1234b4520cad upstream

ghes_read_estatus() reads the record address, then the record's
header, then performs some sanity checks before reading the
records into the provided estatus buffer.

To provide this estatus buffer the caller must know the size of the
records in advance, or always provide a worst-case sized buffer as
happens today for the non-NMI notifications.

Add a function to peek at the record's header to find the size. This
will let the NMI path allocate the right amount of memory before reading
the records, instead of using the worst-case size, and having to copy
the records.

Split ghes_read_estatus() to create __ghes_peek_estatus() which
returns the address and size of the CPER records.
Signed-off-by: NJames Morse <james.morse@arm.com>

Changes since v7:
 * Grammar
 * concistent argument ordering

Changes since v6:
 * Additional buf_addr = 0 error handling
 * Moved checking out of peek-estatus
 * Reworded an error message so we can tell them apart
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28612342

commit f2a681b9160b9c80826b3062e71371cfc82b4863 upstream

ghes_read_estatus() checks various lengths in the top-level header to
ensure the CPER records to be read aren't obviously corrupt.

Take the opportunity to make this more user-friendly, printing a
(ratelimited) message about the nature of the header format error.
Suggested-by: NBorislav Petkov <bp@alien8.de>
Signed-off-by: NJames Morse <james.morse@arm.com>
[ rjw: Add missing 'static' ]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28612342

commit f2a7e059aa7a6a22a6f4612f31ee29e726a3bfd0 upstream

The NMI-like notifications scribble over ghes->estatus, before
copying it somewhere else. If this interrupts the ghes_probe() code
calling ghes_proc() on each struct ghes, the data is corrupted.

All the NMI-like notifications should use a queued estatus entry
from the beginning, instead of the ghes version, then copying it.
To do this, break up any use of "ghes->estatus" so that all
functions take the estatus as an argument.

This patch just moves these ghes->estatus dereferences into separate
arguments, no change in behaviour. struct ghes becomes unused in
ghes_clear_estatus() as it only wanted ghes->estatus, which we now
pass directly. This is removed.
Signed-off-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28612342

commit b484079b9f520cc9a0797d885f1cd7f64b72b1b2 upstream

ghes_copy_tofrom_phys() uses a different fixmap slot depending on in_nmi().
This doesn't work when there are multiple NMI-like notifications, that
could interrupt each other.

As with the locking, move the chosen fixmap_idx to the notification helper.
This only matters for NMI-like notifications, anything calling
ghes_proc() can use the IRQ fixmap slot as its already holding an irqsave
spinlock.

This lets us collapse the ghes_ioremap_pfn_*() helpers.
Signed-off-by: NJames Morse <james.morse@arm.com>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28612342

commit 3b880cbe4df5dd78a2b2279dbe16db9d193412ca upstream

ghes_copy_tofrom_phys() takes different locks depending on in_nmi().
This doesn't work if there are multiple NMI-like notifications, that
can interrupt each other.

Now that NOTIFY_SEA is always called in the same context, move the
lock-taking to the notification helper. The helper will always know
which lock to take. This avoids ghes_copy_tofrom_phys() taking a guess
based on in_nmi().

This splits NOTIFY_NMI and NOTIFY_SEA to use different locks. All
the other notifications use ghes_proc(), and are called in process
or IRQ context. Move the spin_lock_irqsave() around their ghes_proc()
calls.
Signed-off-by: NJames Morse <james.morse@arm.com>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28612342

commit d44f1b8dd7e66d80cc4205809e5ace866bd851da upstream

To split up APEIs in_nmi() path, the caller needs to always be
in_nmi(). Add a helper to do the work and claim the notification.

When KVM or the arch code takes an exception that might be a RAS
notification, it asks the APEI firmware-first code whether it wants
to claim the exception. A future kernel-first mechanism may be queried
afterwards, and claim the notification, otherwise we fall through
to the existing default behaviour.

The NOTIFY_SEA code was merged before considering multiple, possibly
interacting, NMI-like notifications and the need to consider kernel
first in the future. Make the 'claiming' behaviour explicit.

Restructuring the APEI code to allow multiple NMI-like notifications
means any notification that might interrupt interrupts-masked
code must always be wrapped in nmi_enter()/nmi_exit(). This will
allow APEI to use in_nmi() to use the right fixmap entries.

Mask SError over this window to prevent an asynchronous RAS error
arriving and tripping 'nmi_enter()'s BUG_ON(in_nmi()).
Signed-off-by: NJames Morse <james.morse@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Tested-by: NTyler Baicar <tbaicar@codeaurora.org>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28612342

commit 0db5e0223035b2c84e6186831fc27511270af812 upstream

To split up APEIs in_nmi() path, the caller needs to always be
in_nmi(). KVM shouldn't have to know about this, pull the RAS plumbing
out into a header file.

Currently guest synchronous external aborts are claimed as RAS
notifications by handle_guest_sea(), which is hidden in the arch codes
mm/fault.c. 32bit gets a dummy declaration in system_misc.h.

There is going to be more of this in the future if/when the kernel
supports the SError-based firmware-first notification mechanism and/or
kernel-first notifications for both synchronous external abort and
SError. Each of these will come with some Kconfig symbols and a
handful of header files.

Create a header file for all this.

This patch gives handle_guest_sea() a 'kvm_' prefix, and moves the
declarations to kvm_ras.h as preparation for a future patch that moves
the ACPI-specific RAS code out of mm/fault.c.
Signed-off-by: NJames Morse <james.morse@arm.com>
Reviewed-by: NPunit Agrawal <punit.agrawal@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Tested-by: NTyler Baicar <tbaicar@codeaurora.org>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28612342

commit 255097c82d821bb2bb18e9c7011841ee7342840f upstream

Now that the estatus queue can be used by more than one notification
method, we can move notifications that have NMI-like behaviour over.

Switch NOTIFY_SEA over to use the estatus queue. This makes it behave
in the same way as x86's NOTIFY_NMI.

Remove Kconfig's ability to turn ACPI_APEI_SEA off if ACPI_APEI_GHES
is selected. This roughly matches the x86 NOTIFY_NMI behaviour, and means
each architecture has at least one user of the estatus-queue, meaning it
doesn't need guarding with ifdef.
Signed-off-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28612342

commit 9c9d08051380ad3f6e6376d4383615771c59fd99 upstream

The estatus-queue code is currently hidden by the NOTIFY_NMI #ifdefs.
Once NOTIFY_SEA starts using the estatus-queue we can stop hiding
it as each architecture has a user that can't be turned off.

Split the existing CONFIG_HAVE_ACPI_APEI_NMI block in two, and move
the SEA code into the gap.

Move the code around ... and changes the stale comment describing
why the status queue is necessary: printk() is no longer the issue,
its the helpers like memory_failure_queue() that aren't nmi safe.
Signed-off-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28612342

commit 06ddeadc8d1c4f704b8956f239263bca75a3add8 upstream

During ghes_proc() we use ghes_ack_error() to tell an external agent
we are done with these records and it can re-use the memory.

rc may hold an error returned by ghes_read_estatus(), ENOENT causes
us to skip ghes_ack_error() (as there is nothing to ack), but rc may
also by EIO, which gets supressed.

ghes_clear_estatus() is where we mark the records as processed for
non GHESv2 error sources, and already spots the ENOENT case as
buf_paddr is set to 0 by ghes_read_estatus().

Move the ghes_ack_error() call in here to avoid extra logic with
the return code in ghes_proc().

This enables GHESv2 acking for NMI-like error sources. This is safe
as the buffer is pre-mapped by map_gen_v2() before the GHES is added
to any NMI handler lists.

This same pre-mapping step means we can't receive an error from
apei_read()/write() here as apei_check_gar() succeeded when it
was mapped, and the mapping was cached, so the address can't be
rejected at runtime. Remove the error-returns as this is now
called from a function with no return.
Signed-off-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28612342

commit ee2eb3d4ee175c2fb5c7f67e84f5fe40a8147d92 upstream

Refactor the estatus queue's pool notification routine from
NOTIFY_NMI's handlers. This will allow another notification
method to use the estatus queue without duplicating this code.

Add rcu_read_lock()/rcu_read_unlock() around the list
list_for_each_entry_rcu() walker. These aren't strictly necessary as
the whole nmi_enter/nmi_exit() window is a spooky RCU read-side
critical section.

in_nmi_queue_one_entry() is separate from the rcu-list walker for a
later caller that doesn't need to walk a list.
Signed-off-by: NJames Morse <james.morse@arm.com>
Reviewed-by: NPunit Agrawal <punit.agrawal@arm.com>
Tested-by: NTyler Baicar <tbaicar@codeaurora.org>
[ rjw: Drop unnecessary err variable in two places ]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28612342

commit 5cc6c68287ae4be22c40b41cf6844746cddebbcc upstream

ghes_read_estatus() sets a flag in struct ghes if the buffer of
CPER records needs to be cleared once the records have been
processed. This flag value is a problem if a struct ghes can be
processed concurrently, as happens at probe time if an NMI arrives
for the same error source. The NMI clears the flag, meaning the
interrupted handler may never do the ghes_estatus_clear() work.

The GHES_TO_CLEAR flags is only set at the same time as
buffer_paddr, which is now owned by the caller and passed to
ghes_clear_estatus(). Use this value as the flag.

A non-zero buf_paddr returned by ghes_read_estatus() means
ghes_clear_estatus() should clear this address. ghes_read_estatus()
already checks for a read of error_status_address being zero,
so CPER records cannot be written here.
Signed-off-by: NJames Morse <james.morse@arm.com>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28612342

commit 7d49f2c75af22f980fd716a13634a16cfb7dd8a7 upstream

ghes_notify_nmi() checks ghes->flags for GHES_TO_CLEAR before going
on to __process_error(). This is pointless as ghes_read_estatus()
will always set this flag if it returns success, which was checked
earlier in the loop. Remove it.
Signed-off-by: NJames Morse <james.morse@arm.com>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28612342

commit eeb2555779471abdbcc6289a52dc54ce513feaf2 upstream

When CPER records are found the address of the records is stashed
in the struct ghes. Once the records have been processed, this
address is overwritten with zero so that it won't be processed
again without being re-populated by firmware.

This goes wrong if a struct ghes can be processed concurrently,
as can happen at probe time when an NMI occurs. If the NMI arrives
on another CPU, the probing CPU may call ghes_clear_estatus() on the
records before the handler had finished with them.
Even on the same CPU, once the interrupted handler is resumed, it
will call ghes_clear_estatus() on the NMIs records, this memory may
have already been re-used by firmware.

Avoid this stashing by letting the caller hold the address. A
later patch will do away with the use of ghes->flags in the
read/clear code too.
Signed-off-by: NJames Morse <james.morse@arm.com>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28612342

commit fb7be08f1a091ec243780bfdad4bf0c492057808 upstream

Adding new NMI-like notifications duplicates the calls that grow
and shrink the estatus pool. This is all pretty pointless, as the
size is capped to 64K. Allocate this for each ghes and drop
the code that grows and shrinks the pool.
Suggested-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NJames Morse <james.morse@arm.com>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28612342

commit e147133a42cb9df6cbc99503fdf58d0e6388bf2a upstream

ghes.c has a memory pool it uses for the estatus cache and the estatus
queue. The cache is initialised when registering the platform driver.
For the queue, an NMI-like notification has to grow/shrink the pool
as it is registered and unregistered.

This is all pretty noisy when adding new NMI-like notifications, it
would be better to replace this with a static pool size based on the
number of users.

As a precursor, move the call that creates the pool from ghes_init(),
into hest.c. Later this will take the number of ghes entries and
consolidate the queue allocations.
Remove ghes_estatus_pool_exit() as hest.c doesn't have anywhere to put
this.

The pool is now initialised as part of ACPI's subsys_initcall():
(acpi_init(), acpi_scan_init(), acpi_pci_root_init(), acpi_hest_init())
Before this patch it happened later as a GHES specific device_initcall().
Signed-off-by: NJames Morse <james.morse@arm.com>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28612342

commit 93066e9aefa16beb10bb4a32c2f1657822b57753 upstream

Subsequent patches will split up ghes_read_estatus(), at which
point passing around the 'silent' flag gets annoying. This is to
suppress prink() messages, which prior to commit 42a0bb3f
("printk/nmi: generic solution for safe printk in NMI"), were
unsafe in NMI context.

This is no longer necessary, remove the flag. printk() messages
are batched in a per-cpu buffer and printed via irq-work, or a call
back from panic().
Signed-off-by: NJames Morse <james.morse@arm.com>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28871358

commit b2c5d16b72df1116f05c9be16a630ac939d34101 upstream

If we have that hook, we know the driver handles bd->last == true in
a smart fashion. If it does, even for multiple hardware queues, it's
a good idea to flush batches of requests to the device, if we have
batches of requests from the submitter.
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #28871358

commit be94f058f2bde6f0b0ee9059a35daa8e15be308f upstream

If we are issuing a list of requests, we know if we're at the last one.
If we fail issuing, ensure that we call ->commits_rqs() to flush any
potential previous requests.
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #28871358

commit 944e7c87967c820a0f34a935b1f2799944099750 upstream

We need this for blk-mq to kick things into gear, if we told it that
we had more IO coming, but then failed to deliver on that promise.
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #28871358

commit 04f3eafda6e05adc56afed4d3ae6e24aaa429058 upstream

Split the command submission and the SQ doorbell ring, and add the
doorbell ring as our ->commit_rqs() hook. This allows a list of
requests to be issued, with nvme only writing the SQ update when
it's necessary. This is more efficient if we have lists of requests
to issue, particularly on virtualized hardware, where writing the
SQ doorbell is more expensive than on real hardware. For those cases,
performance increases of 2-3x have been observed.

The use case for this is plugged IO, where blk-mq flushes a batch of
requests at the time.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #28871358

commit d666ba98f849ad44c4405ecc2180390ebe80f4f9 upstream

blk-mq passes information to the hardware about any given request being
the last that we will issue in this sequence. The point is that hardware
can defer costly doorbell type writes to the last request. But if we run
into errors issuing a sequence of requests, we may never send the request
with bd->last == true set. For that case, we need a hook that tells the
hardware that nothing else is coming right now.

For failures returned by the drivers ->queue_rq() hook, the driver is
responsible for flushing pending requests, if it uses bd->last to
optimize that part. This works like before, no changes there.
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #28871358

Only do it if we have requests for multiple queues in the same
plug.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28739709

commit bef69dd87828ef5d8ecdab8d857cd3a33cf98675 upstream

update_cfs_rq_load_avg() calls cfs_rq_util_change() every time PELT decays,
which might be inefficient when the cpufreq driver has rate limitation.

When a task is attached on a CPU, we have this call path:

update_load_avg()
  update_cfs_rq_load_avg()
    cfs_rq_util_change -- > trig frequency update
  attach_entity_load_avg()
    cfs_rq_util_change -- > trig frequency update

The 1st frequency update will not take into account the utilization of the
newly attached task and the 2nd one might be discarded because of rate
limitation of the cpufreq driver.

update_cfs_rq_load_avg() is only called by update_blocked_averages()
and update_load_avg() so we can move the call to
cfs_rq_util_change/cpufreq_update_util() into these two functions.

It's also interesting to note that update_load_avg() already calls
cfs_rq_util_change() directly for the !SMP case.

This change will also ensure that cpufreq_update_util() is called even
when there is no more CFS rq in the leaf_cfs_rq_list to update, but only
IRQ, RT or DL PELT signals.

[ mingo: Minor updates. ]
Reported-by: NDoug Smythies <dsmythies@telus.net>
Tested-by: NDoug Smythies <dsmythies@telus.net>
Signed-off-by: NVincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NDietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: juri.lelli@redhat.com
Cc: linux-pm@vger.kernel.org
Cc: mgorman@suse.de
Cc: rostedt@goodmis.org
Cc: sargun@sargun.me
Cc: srinivas.pandruvada@linux.intel.com
Cc: tj@kernel.org
Cc: xiexiuqi@huawei.com
Cc: xiezhipeng1@huawei.com
Fixes: 039ae8b ("sched/fair: Fix O(nr_cgroups) in the load balancing path")
Link: https://lkml.kernel.org/r/1574083279-799-1-git-send-email-vincent.guittot@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NYihao Wu <wuyihao@linux.alibaba.com>
Acked-by: NMichael Wang <yun.wang@linux.alibaba.com>

to #28739709

commit 039ae8bcf7a5f4476f4487e6bf816885fb3fb617 upstream

This re-applies the commit reverted here:

  commit c40f7d74c741 ("sched/fair: Fix infinite loop in update_blocked_averages() by reverting a9e7f654")

I.e. now that cfs_rq can be safely removed/added in the list, we can re-apply:

 commit a9e7f654 ("sched/fair: Fix O(nr_cgroups) in load balance path")
Signed-off-by: NVincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: sargun@sargun.me
Cc: tj@kernel.org
Cc: xiexiuqi@huawei.com
Cc: xiezhipeng1@huawei.com
Link: https://lkml.kernel.org/r/1549469662-13614-3-git-send-email-vincent.guittot@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NYihao Wu <wuyihao@linux.alibaba.com>
Acked-by: NMichael Wang <yun.wang@linux.alibaba.com>

to #28739709

commit 31bc6aeaab1d1de8959b67edbed5c7a4b3cdbe7c upstream

Removing a cfs_rq from rq->leaf_cfs_rq_list can break the parent/child
ordering of the list when it will be added back. In order to remove an
empty and fully decayed cfs_rq, we must remove its children too, so they
will be added back in the right order next time.

With a normal decay of PELT, a parent will be empty and fully decayed
if all children are empty and fully decayed too. In such a case, we just
have to ensure that the whole branch will be added when a new task is
enqueued. This is default behavior since :

  commit f6783319737f ("sched/fair: Fix insertion in rq->leaf_cfs_rq_list")

In case of throttling, the PELT of throttled cfs_rq will not be updated
whereas the parent will. This breaks the assumption made above unless we
remove the children of a cfs_rq that is throttled. Then, they will be
added back when unthrottled and a sched_entity will be enqueued.

As throttled cfs_rq are now removed from the list, we can remove the
associated test in update_blocked_averages().
Signed-off-by: NVincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: sargun@sargun.me
Cc: tj@kernel.org
Cc: xiexiuqi@huawei.com
Cc: xiezhipeng1@huawei.com
Link: https://lkml.kernel.org/r/1549469662-13614-2-git-send-email-vincent.guittot@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NYihao Wu <wuyihao@linux.alibaba.com>
Acked-by: NMichael Wang <yun.wang@linux.alibaba.com>

to #29028845

cpuacct_update_latency's declaration was changed since 6dbaddaa,
but was not changed for the case when CONFIG_SCHED_SLI=n. This leads
to a compilation error.

Fixes: 6dbaddaa ("alinux: sched: Add cgroup's scheduling latency histograms")
Signed-off-by: NYihao Wu <wuyihao@linux.alibaba.com>
Acked-by: NMichael Wang <yun.wang@linux.alibaba.com>

fix #28339081

commit edfbcb321faf07ca970e4191abe061deeb7d3788 upstream

The USB buffer allocation code is the only place in the usb core (and in
fact the whole kernel) that uses is_device_dma_capable, while the URB
mapping code uses the uses_dma flag in struct usb_bus.  Switch the buffer
allocation to use the uses_dma flag used by the rest of the USB code,
and create a helper in hcd.h that checks this flag as well as the
CONFIG_HAS_DMA to simplify the caller a bit.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20190811080520.21712-3-hch@lst.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>

fix #28339081

commit dd3ecf17ba70a70d2c9ef9ba725281b84f8eef12 upstream

If the HCD provides a localmem pool we will never use the DMA pools, so
don't create them.

Fixes: b0310c2f09bb ("USB: use genalloc for USB HCs with local memory")
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20190811080520.21712-2-hch@lst.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>