- 26 9月, 2013 2 次提交
-
-
由 David Howells 提交于
Modify public_key_verify_signature() so that it now takes a public_key struct rather than a key struct and supply a wrapper that takes a key struct. The wrapper is then used by the asymmetric key subtype and the modified function is used by X.509 self-signature checking and can be used by other things also. Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NKees Cook <keescook@chromium.org> Reviewed-by: NJosh Boyer <jwboyer@redhat.com>
-
由 David Howells 提交于
Store public key algo ID in public_key struct for reference purposes. This allows it to be removed from the x509_certificate struct and used to find a default in public_key_verify_signature(). Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NKees Cook <keescook@chromium.org> Reviewed-by: NJosh Boyer <jwboyer@redhat.com>
-
- 25 9月, 2013 2 次提交
-
-
由 David Howells 提交于
Move the public-key algorithm pointer array from x509_public_key.c to public_key.c as it isn't X.509 specific. Note that to make this configure correctly, the public key part must be dependent on the RSA module rather than the other way round. This needs a further patch to make use of the crypto module loading stuff rather than using a fixed table. Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NKees Cook <keescook@chromium.org> Reviewed-by: NJosh Boyer <jwboyer@redhat.com>
-
由 David Howells 提交于
Rename the arrays of public key parameters (public key algorithm names, hash algorithm names and ID type names) so that the array name ends in "_name". Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NKees Cook <keescook@chromium.org> Reviewed-by: NJosh Boyer <jwboyer@redhat.com>
-
- 12 9月, 2013 1 次提交
-
-
由 Herbert Xu 提交于
Unfortunately, even with a softdep some distros fail to include the necessary modules in the initrd. Therefore this patch adds a fallback path to restore existing behaviour where we cannot load the new crypto crct10dif algorithm. In order to do this, the underlying crct10dif has been split out from the crypto implementation so that it can be used on the fallback path. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 08 9月, 2013 1 次提交
-
-
由 Herbert Xu 提交于
crypto_larval_lookup should only return a larval if it created one. Any larval created by another entity must be processed through crypto_larval_wait before being returned. Otherwise this will lead to a larval being killed twice, which will most likely lead to a crash. Cc: stable@vger.kernel.org Reported-by: NKees Cook <keescook@chromium.org> Tested-by: NKees Cook <keescook@chromium.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 07 9月, 2013 1 次提交
-
-
由 Herbert Xu 提交于
This patch reinstates commits 67822649 39761214 0b95a7f8 31d93962 2d31e518 Now that module softdeps are in the kernel we can use that to resolve the boot issue which cause the revert. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 02 9月, 2013 1 次提交
-
-
由 Jan-Simon Möller 提交于
v2: Fix bug in statement as pointed out by Herbert Xu. Kudos to pipacs. Author: PaX Team <pageexec at freemail.hu> ML-Post: http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20120507/142707.html URL: http://llvm.linuxfoundation.org Merge: Jan-Simon Möller <dl9pf at gmx.de> Description: Fix for warning: linux/crypto/fcrypt.c:143:47: warning: signed shift result (0x598000000) requires 36 bits to represent, but 'int' only has 32 bits [-Wshift-overflow] Z(0xef), Z(0x70), Z(0xcf), Z(0xc2), Z(0x2a), Z(0xb3), Z(0x61), Z(0xad), ^~~~~~~ linux/crypto/fcrypt.c:113:29: note: expanded from macro 'Z' ^ ~~ linux/include/uapi/linux/byteorder/little_endian.h:38:53: note: expanded from macro '__cpu_to_be32' ^ linux/include/uapi/linux/swab.h:116:21: note: expanded from macro '__swab32' ___constant_swab32(x) : \ ^ linux/include/uapi/linux/swab.h:18:12: note: expanded from macro '___constant_swab32' (((__u32)(x) & (__u32)0x0000ff00UL) << 8) | \ ^ Solution - make sure we don't exceed the 32 bit range. #define Z(x) cpu_to_be32(((x & 0x1f) << 27) | (x >> 5)) Signed-off-by: NJan-Simon Möller <dl9pf@gmx.de> CC: pageexec@freemail.hu CC: llvmlinux@lists.linuxfoundation.org CC: behanw@converseincode.com CC: herbert@gondor.apana.org.au CC: davem@davemloft.net CC: linux-crypto@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 21 8月, 2013 2 次提交
-
-
由 Joel Fernandes 提交于
Crypto layer only passes nbytes to encrypt but in omap-aes driver we need to know number of SG elements to pass to dmaengine slave API. We add function for the same to scatterwalk library. Signed-off-by: NJoel Fernandes <joelf@ti.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Julia Lawall 提交于
Adjust alignment and replace commas by semicolons in automatically generated code. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 20 8月, 2013 1 次提交
-
-
由 Cristian Stoica 提交于
Signed-off-by: NCristian Stoica <cristian.stoica@freescale.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 14 8月, 2013 1 次提交
-
-
由 Andi Kleen 提交于
Tables used from assembler should be marked __visible to let the compiler know. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 01 8月, 2013 1 次提交
-
-
由 Cristian Stoica 提交于
This patch removes redundant execution of the same test suite in cases where alg and driver variables are the same (e.g. when alg_test is called from tcrypt_test) Signed-off-by: NCristian Stoica <cristian.stoica@freescale.com> Reviewed-by: NHoria Geanta <horia.geanta@freescale.com> Reviewed-by: NRuchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 24 7月, 2013 1 次提交
-
-
由 Herbert Xu 提交于
This reverts commits 67822649 39761214 0b95a7f8 31d93962 2d31e518 Unfortunately this change broke boot on some systems that used an initrd which does not include the newly created crct10dif modules. As these modules are required by sd_mod under certain configurations this is a serious problem. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 10 7月, 2013 1 次提交
-
-
由 Chanho Min 提交于
Add support for lz4 and lz4hc compression algorithm using the lib/lz4/* codebase. [akpm@linux-foundation.org: fix warnings] Signed-off-by: NChanho Min <chanho.min@lge.com> Cc: "Darrick J. Wong" <djwong@us.ibm.com> Cc: Bob Pearson <rpearson@systemfabricworks.com> Cc: Richard Weinberger <richard@nod.at> Cc: Herbert Xu <herbert@gondor.hengli.com.au> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 7月, 2013 3 次提交
-
-
There have never been any real users of MEMSET operations since they have been introduced in January 2007 by commit 7405f74b ("dmaengine: refactor dmaengine around dma_async_tx_descriptor"). Therefore remove support for them for now, it can be always brought back when needed. [sebastian.hesselbarth@gmail.com: fix drivers/dma/mv_xor] Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Vinod Koul <vinod.koul@intel.com> Acked-by: NDan Williams <djbw@fb.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Olof Johansson <olof@lixom.net> Cc: Kevin Hilman <khilman@linaro.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kees Cook 提交于
For the workqueue creation interfaces that do not expect format strings, make sure they cannot accidently be parsed that way. Additionally, clean up calls made with a single parameter that would be handled as a format string. Many callers are passing potentially dynamic string content, so use "%s" in those cases to avoid any potential accidents. Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kees Cook 提交于
The template lookup interface does not provide a way to use format strings, so make sure that the interface cannot be abused accidentally. Signed-off-by: NKees Cook <keescook@chromium.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 6月, 2013 1 次提交
-
-
由 Herbert Xu 提交于
On Thu, Jun 20, 2013 at 10:00:21AM +0200, Daniel Borkmann wrote: > After having fixed a NULL pointer dereference in SCTP 1abd165e ("net: > sctp: fix NULL pointer dereference in socket destruction"), I ran into > the following NULL pointer dereference in the crypto subsystem with > the same reproducer, easily hit each time: > > BUG: unable to handle kernel NULL pointer dereference at (null) > IP: [<ffffffff81070321>] __wake_up_common+0x31/0x90 > PGD 0 > Oops: 0000 [#1] SMP > Modules linked in: padlock_sha(F-) sha256_generic(F) sctp(F) libcrc32c(F) [..] > CPU: 6 PID: 3326 Comm: cryptomgr_probe Tainted: GF 3.10.0-rc5+ #1 > Hardware name: Dell Inc. PowerEdge T410/0H19HD, BIOS 1.6.3 02/01/2011 > task: ffff88007b6cf4e0 ti: ffff88007b7cc000 task.ti: ffff88007b7cc000 > RIP: 0010:[<ffffffff81070321>] [<ffffffff81070321>] __wake_up_common+0x31/0x90 > RSP: 0018:ffff88007b7cde08 EFLAGS: 00010082 > RAX: ffffffffffffffe8 RBX: ffff88003756c130 RCX: 0000000000000000 > RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffff88003756c130 > RBP: ffff88007b7cde48 R08: 0000000000000000 R09: ffff88012b173200 > R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000282 > R13: ffff88003756c138 R14: 0000000000000000 R15: 0000000000000000 > FS: 0000000000000000(0000) GS:ffff88012fc60000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b > CR2: 0000000000000000 CR3: 0000000001a0b000 CR4: 00000000000007e0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Stack: > ffff88007b7cde28 0000000300000000 ffff88007b7cde28 ffff88003756c130 > 0000000000000282 ffff88003756c128 ffffffff81227670 0000000000000000 > ffff88007b7cde78 ffffffff810722b7 ffff88007cdcf000 ffffffff81a90540 > Call Trace: > [<ffffffff81227670>] ? crypto_alloc_pcomp+0x20/0x20 > [<ffffffff810722b7>] complete_all+0x47/0x60 > [<ffffffff81227708>] cryptomgr_probe+0x98/0xc0 > [<ffffffff81227670>] ? crypto_alloc_pcomp+0x20/0x20 > [<ffffffff8106760e>] kthread+0xce/0xe0 > [<ffffffff81067540>] ? kthread_freezable_should_stop+0x70/0x70 > [<ffffffff815450dc>] ret_from_fork+0x7c/0xb0 > [<ffffffff81067540>] ? kthread_freezable_should_stop+0x70/0x70 > Code: 41 56 41 55 41 54 53 48 83 ec 18 66 66 66 66 90 89 75 cc 89 55 c8 > 4c 8d 6f 08 48 8b 57 08 41 89 cf 4d 89 c6 48 8d 42 e > RIP [<ffffffff81070321>] __wake_up_common+0x31/0x90 > RSP <ffff88007b7cde08> > CR2: 0000000000000000 > ---[ end trace b495b19270a4d37e ]--- > > My assumption is that the following is happening: the minimal SCTP > tool runs under ``echo 1 > /proc/sys/net/sctp/auth_enable'', hence > it's making use of crypto_alloc_hash() via sctp_auth_init_hmacs(). > It forks itself, heavily allocates, binds, listens and waits in > accept on sctp sockets, and then randomly kills some of them (no > need for an actual client in this case to hit this). Then, again, > allocating, binding, etc, and then killing child processes. > > The problem that might be happening here is that cryptomgr requests > the module to probe/load through cryptomgr_schedule_probe(), but > before the thread handler cryptomgr_probe() returns, we return from > the wait_for_completion_interruptible() function and probably already > have cleared up larval, thus we run into a NULL pointer dereference > when in cryptomgr_probe() complete_all() is being called. > > If we wait with wait_for_completion() instead, this panic will not > occur anymore. This is valid, because in case a signal is pending, > cryptomgr_probe() returns from probing anyway with properly calling > complete_all(). The use of wait_for_completion_interruptible is intentional so that we don't lock up the thread if a bug causes us to never wake up. This bug is caused by the helper thread using the larval without holding a reference count on it. If the helper thread completes after the original thread requesting for help has gone away and destroyed the larval, then we get the crash above. So the fix is to hold a reference count on the larval. Cc: <stable@vger.kernel.org> # 3.6+ Reported-by: NDaniel Borkmann <dborkman@redhat.com> Tested-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 21 6月, 2013 6 次提交
-
-
由 Jussi Kivilinna 提交于
This patch adds unaligned buffer tests for hashes. The first new test is with one byte offset and the second test checks if cra_alignmask for driver is big enough; for example, for testing a case where cra_alignmask is set to 7, but driver really needs buffers to be aligned to 16 bytes. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
This patch adds unaligned buffer tests for AEADs. The first new test is with one byte offset and the second test checks if cra_alignmask for driver is big enough; for example, for testing a case where cra_alignmask is set to 7, but driver really needs buffers to be aligned to 16 bytes. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
This patch adds unaligned buffer tests for blkciphers. The first new test is with one byte offset and the second test checks if cra_alignmask for driver is big enough; for example, for testing a case where cra_alignmask is set to 7, but driver really needs buffers to be aligned to 16 bytes. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
Patch adds check for alg_test_descs list order, so that accidentically misplaced entries are found quicker. Duplicate entries are also checked for. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
This reverts commit cf1521a1. Instruction (vpgatherdd) that this implementation relied on turned out to be slow performer on real hardware (i5-4570). The previous 8-way twofish/AVX implementation is therefore faster and this implementation should be removed. Converting this implementation to use the same method as in twofish/AVX for table look-ups would give additional ~3% speed up vs twofish/AVX, but would hardly be worth of the added code and binary size. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
This reverts commit 60488010. Instruction (vpgatherdd) that this implementation relied on turned out to be slow performer on real hardware (i5-4570). The previous 4-way blowfish implementation is therefore faster and this implementation should be removed. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 05 6月, 2013 2 次提交
-
-
由 Jussi Kivilinna 提交于
It appears that the performance of 'vpgatherdd' is suboptimal for this kind of workload (tested on Core i5-4570) and causes blowfish-avx2 to be significantly slower than blowfish-amd64. So disable the AVX2 implementation to avoid performance regressions. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
It appears that the performance of 'vpgatherdd' is suboptimal for this kind of workload (tested on Core i5-4570) and causes twofish_avx2 to be significantly slower than twofish_avx. So disable the AVX2 implementation to avoid performance regressions. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 28 5月, 2013 1 次提交
-
-
由 Jussi Kivilinna 提交于
'sha512_generic' should set driver name now that there is alternative sha512 provider (sha512_ssse3). Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 24 5月, 2013 2 次提交
-
-
由 Tim Chen 提交于
These are simple tests to do sanity check of CRC T10 DIF hash. The correctness of the transform can be checked with the command modprobe tcrypt mode=47 The speed of the transform can be evaluated with the command modprobe tcrypt mode=320 Set the cpu frequency to constant and turn turbo off when running the speed test so the frequency governor will not tweak the frequency and affects the measurements. Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Tim Chen 提交于
Glue code that plugs the PCLMULQDQ accelerated CRC T10 DIF hash into the crypto framework. The config CRYPTO_CRCT10DIF_PCLMUL should be turned on to enable the feature. The crc_t10dif crypto library function will use this faster algorithm when crct10dif_pclmul module is loaded. Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 20 5月, 2013 1 次提交
-
-
由 Tim Chen 提交于
When CRC T10 DIF is calculated using the crypto transform framework, we wrap the crc_t10dif function call to utilize it. This allows us to take advantage of any accelerated CRC T10 DIF transform that is plugged into the crypto framework. Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 30 4月, 2013 1 次提交
-
-
由 Akinobu Mita 提交于
Use prandom_bytes() to generate random bytes for test data. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Dan Williams <djbw@fb.com> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 4月, 2013 8 次提交
-
-
由 Jussi Kivilinna 提交于
Patch adds AVX2/AES-NI/x86-64 implementation of Camellia cipher, requiring 32 parallel blocks for input (512 bytes). Compared to AVX implementation, this version is extended to use the 256-bit wide YMM registers. For AES-NI instructions data is split to two 128-bit registers and merged afterwards. Even with this additional handling, performance should be higher compared to the AES-NI/AVX implementation. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
Patch adds AVX2/x86-64 implementation of Serpent cipher, requiring 16 parallel blocks for input (256 bytes). Implementation is based on the AVX implementation and extends to use the 256-bit wide YMM registers. Since serpent does not use table look-ups, this implementation should be close to two times faster than the AVX implementation. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
Patch adds AVX2/x86-64 implementation of Twofish cipher, requiring 16 parallel blocks for input (256 bytes). Table look-ups are performed using vpgatherdd instruction directly from vector registers and thus should be faster than earlier implementations. Implementation also uses 256-bit wide YMM registers, which should give additional speed up compared to the AVX implementation. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
Patch adds AVX2/x86-64 implementation of Blowfish cipher, requiring 32 parallel blocks for input (256 bytes). Table look-ups are performed using vpgatherdd instruction directly from vector registers and thus should be faster than earlier implementations. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
The Kconfig setting for glue helper module is CRYPTO_GLUE_HELPER_X86, but recent change for aesni_intel used CRYPTO_GLUE_HELPER instead. Patch corrects this issue. Cc: kbuild-all@01.org Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
Add more optimized XTS code for aesni_intel in 64-bit mode, for smaller stack usage and boost for speed. tcrypt results, with Intel i5-2450M: 256-bit key enc dec 16B 0.98x 0.99x 64B 0.64x 0.63x 256B 1.29x 1.32x 1024B 1.54x 1.58x 8192B 1.57x 1.60x 512-bit key enc dec 16B 0.98x 0.99x 64B 0.60x 0.59x 256B 1.24x 1.25x 1024B 1.39x 1.42x 8192B 1.38x 1.42x I chose not to optimize smaller than block size of 256 bytes, since XTS is practically always used with data blocks of size 512 bytes. This is why performance is reduced in tcrypt for 64 byte long blocks. Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-