Various improvements of qdio error reporting to the
upper-layer drivers (qeth, zfcp):

- Split QDIO_ERROR_ACTIVATE_CHECK_CONDITION into:

  QDIO_ERROR_ACTIVATE: qdio termination interrupt
  QDIO_ERROR_GET_BUF_STATE: QIOASSIST eqbs error
  QDIO_ERROR_SET_BUF_STATE: QIOASSIST sqbs error

  Add QDIO_ERROR_FATAL / QDIO_ERROR_TEMPORARY masks
  to ease recovery decision in upper-layer drivers.

- Don't (ab-)use qdio handler errors as return codes
  for do_QDIO but use standard error codes:

  -ENOBUFS: temporary target CC=2 condition
  -EBUSY: unresolved SIGA-W CC=2 busy condition
  -EIO: I/O error (CC=1, CC=3)

- Remove unneeded memory clobber from SIGA-R
- Remove EX_TABLE entry on SIGA-W, we want to see these errors
Reviewed-by: NUrsula Braun <ursula.braun@de.ibm.com>
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Remove duplicate definition accidentally introduced in 104ea556
and re-group definitions nicely.
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The scheduler depends on receiving the CPU_STARTING notification, without
which we end up into a lot of trouble. So add the missing call to
notify_cpu_starting() in the bringup code.
Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The scheduler depends on receiving the CPU_STARTING notification, without
which we end up into a lot of trouble. So add the missing call to
notify_cpu_starting() in the bringup code.
Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-and-Tested-by: NMikulas Patocka <mpatocka@redhat.com>
Acked-and-Tested-by: NTobias Ulmer <tobiasu@tmux.org>
Tested-by: NJohn David Anglin <dave.anglin@bell.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Export handle_edge_irq() and irq_to_desc() to modules to allow them to
do things such as

	__irq_set_handler_locked(...., handle_edge_irq);

This fixes

	ERROR: "handle_edge_irq" [drivers/gpio/gpio-pch.ko] undefined!
	ERROR: "irq_to_desc" [drivers/gpio/gpio-pch.ko] undefined!

when gpio-pch is being built as a module.

This was introduced by commit df9541a6 ("gpio: pch9: Use proper flow
type handlers") that added

	__irq_set_handler_locked(d->irq, handle_edge_irq);

but handle_edge_irq() was not exported for modules (and inlined
__irq_set_handler_locked() requires irq_to_desc() exported as well)
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull media fixes from Mauro Carvalho Chehab:
 "For a some fix patches for v3.4, including a regression fix at DVB core"

Fix up trivial conflicts in Documentation/feature-removal-schedule.txt

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] gspca - sonixj: Fix a zero divide in isoc interrupt
  [media] media: videobuf2-dma-contig: include header for exported symbols
  [media] media: videobuf2-dma-contig: quiet sparse noise about plain integer as NULL pointer
  [media] media: vb2-memops: Export vb2_get_vma symbol
  [media] s5p-fimc: Correct memory allocation for VIDIOC_CREATE_BUFS
  [media] s5p-fimc: Fix locking in subdev set_crop op
  [media] dvb_frontend: fix a regression with DVB-S zig-zag
  [media] fintek-cir: change || to &&
  [media] V4L: Schedule V4L2_CID_HCENTER, V4L2_CID_VCENTER controls for removal
  [media] rc: Postpone ISR registration
  [media] marvell-cam: fix an ARM build error
  [media] V4L: soc-camera: protect hosts during probing from overzealous user-space

Pull networking fixes from David Miller:
 "The main purpose of this pull request is to fix up the erroneous
  bonding patch I applied last round.  I meant to apply v4 of the patch
  from Jiri but I applied v3 by accident.  Mea culpa.

  Also, eagle eyed Dan Carpenter noticed that openvswitch has one of
  those "X = alloc(); if (!Y)" mistakes, test the proper pointer
  instead."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  openvswitch: checking wrong variable in queue_userspace_packet()
  bonding: Fix LACPDU rx_dropped commit.

3.4-rc introduced a regression when setting the LEDS. We do the right thing
but then return an error code.

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=43144
Reported-by: Christian Casteyde
Signed-off-by: NAlan Cox <alan@linux/intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

"skb" is non-NULL here, for example we dereference it in skb_clone().
The intent was to test "nskb" which was just set.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NJesse Gross <jesse@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I applied the wrong version of Jiri's bonding fix in commit
13a8e0c8 ("bonding: don't increase
rx_dropped after processing LACPDUs")

I applied v3, which introduces warnings I asked him to fix,
instead of v4 which properly takes care of those issues.

This inter-diffs such that the warnings are now gone.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull three MTD fixes from David Woodhouse:
 - Fix a lock ordering deadlock in JFFS2
 - Fix an oops in the dataflash driver, triggered by a dummy call to test
   whether it has OTP functionality.
 - Fix request_mem_region() failure on amsdelta NAND driver.

* tag 'for-linus-3.4-20120513' of git://git.infradead.org/linux-mtd:
  mtd: ams-delta: fix request_mem_region() failure
  jffs2: Fix lock acquisition order bug in gc path
  mtd: fix oops in dataflash driver

.. and this should hopefully be the last -rc before final 3.4 release.

Pull ARM: SoC fixes from Olof Johansson:
 "I was hoping to be done with fixes for 3.4 but we got two branches
  from subarch maintainers the last couple of days.  So here is one
  last(?) pull request for arm-soc containing 7 patches:

   - Five of them are for shmobile dealing with SMP setup and compile
     failures
   - The remaining two are for regressions on the Samsung platforms"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1
  ARM: EXYNOS: use s5p-timer for UniversalC210 board
  ARM / mach-shmobile: Invalidate caches when booting secondary cores
  ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix
  ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix
  ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper
  ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper

Pull a few more GPIO bug fixes from Grant Likely:
 "Oops, missed a couple.  Here's an updated pull req for GPIO"

A set of PCH bug fixes, and one patch to fix up compile warnings

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  gpio/exynos: Fix compiler warnings when non-exynos machines are selected
  gpio: pch9: Use proper flow type handlers

Merge branch 'v3.4-samsung-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes

* 'v3.4-samsung-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1
  ARM: EXYNOS: use s5p-timer for UniversalC210 board

It should be (1 << 2) for ctrlbit of exynos5_clk_pdma1.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Commit 069d4e74 ("ARM: EXYNOS4: Remove clock event timers using
ARM private timers") removed support for local timers and forced
to use MCT as event source. However MCT is not operating properly
on early revision of EXYNOS4 SoCs. All UniversalC210 boards are
based on it, so that commit broke support for it. This patch
provides a workaround that enables UniversalC210 boards to boot
again. s5p-timer is used as an event source, it works only for
non-SMP builds.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

By Guennadi Liakhovetski (2) and others via Rafael J. Wysocki:
"[...] urgent fixes for Renesas ARM-based platforms.  Four of these
commits are fixes of regressions new in 3.4-rc and the last one is
necessary for SMP to work on those systems in general."

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas:
  ARM / mach-shmobile: Invalidate caches when booting secondary cores
  ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix
  ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix
  ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper
  ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper

Make sure L1 caches are invalidated when booting secondary
cores. Needed to boot all mach-shmobile SMP systems that
are using Cortex-A9 including sh73a0, r8a7779 and EMEV2.

Thanks to imx and tegra guys for actual code.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Tested-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Fix SMP TWD boot regression on sh73a0 based platforms caused by:

4200b16d ARM: shmobile: convert to twd_local_timer_register() interface

After the merge of the above commit it has been impossible to boot
sh73a0 based SoCs with SMP enabled and CONFIG_HAVE_ARM_TWD=y. The
kernel crashes at smp_init_cpus() timing which is before the console
has been initialized, so to the user this looks like a kernel lock up
without any particular error message.

This patch fixes the regression on sh73a0 by moving the TWD
registration code from smp_init_cpus() to sys_timer->init() time.

This patch removed shmobile_twd_init() which is no longer needed
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Fix SMP TWD boot regression on r8a7779 based platforms caused by:

4200b16d ARM: shmobile: convert to twd_local_timer_register() interface

After the merge of the above commit it has been impossible to boot
r8a7779 based SoCs with SMP enabled and CONFIG_HAVE_ARM_TWD=y. The
kernel crashes at smp_init_cpus() timing which is before the console
has been initialized, so to the user this looks like a kernel lock up
without any particular error message.

This patch fixes the regression on r8a7779 by moving the TWD
registration code from smp_init_cpus() to sys_timer->init() time.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

This also fixes the following modular mmc build failure:

arch/arm/mach-shmobile/built-in.o: In function `mackerel_sdhi0_gpio_cd':
pfc-sh7372.c:(.text+0x1138): undefined reference to `mmc_detect_change'

on this platform by eliminating the use of an inline function, which
calls into the mmc core.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Reviewed-by: NSimon Horman <horms@verge.net.au>
Acked-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

This also fixes the following modular mmc build failure:

arch/arm/mach-shmobile/built-in.o: In function `ag5evm_sdhi0_gpio_cd':
pfc-sh73a0.c:(.text+0x7c0): undefined reference to `mmc_detect_change'

on this platform by eliminating the use of an inline function, which
calls into the mmc core.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Tested-by: NSimon Horman <horms@verge.net.au>
Acked-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Pull SCSI fixes from James Bottomley:
 "This is a set of minor qla and virto fixes plus one major regression
  fix (oops in all legacy host drivers)."

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] virtio_scsi: fix TMF use-after-free
  [SCSI] fix oops in all legacy host adapters caused by 6f381fa3
  [SCSI] qla2xxx: Update version number to 8.04.00.03-k.
  [SCSI] qla2xxx: Properly check for current state after the fabric-login request.
  [SCSI] qla2xxx: Proper completion to scsi-ml for scsi status task_set_full and busy.
  [SCSI] qla2xxx: Block flash access from application when device is initialized for ISP82xx.
  [SCSI] qla2xxx: Fix reset time out as qla2xxx not ack to reset request.

Pull networking fixes from David S. Miller:

 1) Since we do RCU lookups on ipv4 FIB entries, we have to test if the
    entry is dead before returning it to our caller.

 2) openvswitch locking and packet validation fixes from Ansis Atteka,
    Jesse Gross, and Pravin B Shelar.

 3) Fix PM resume locking in IGB driver, from Benjamin Poirier.

 4) Fix VLAN header handling in vhost-net and macvtap, from Basil Gor.

 5) Revert a bogus network namespace isolation change that was causing
    regressions on S390 networking devices.

 6) If bonding decides to process and handle a LACPDU frame, we
    shouldn't bump the rx_dropped counter.  From Jiri Bohac.

 7) Fix mis-calculation of available TX space in r8169 driver when doing
    TSO, which can lead to crashes and/or hung device.  From Julien
    Ducourthial.

 8) SCTP does not validate cached routes properly in all cases, from
    Nicolas Dichtel.

 9) Link status interrupt needs to be handled in ks8851 driver, from
    Stephen Boyd.

10) Use capable(), not cap_raised(), in connector/userns netlink code.
    From Eric W. Biederman via Andrew Morton.

11) Fix pktgen OOPS on module unload, from Eric Dumazet.

12) iwlwifi under-estimates SKB truesizes, also from Eric Dumazet.

13) Cure division by zero in SFC driver, from Ben Hutchings.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
  ks8851: Update link status during link change interrupt
  macvtap: restore vlan header on user read
  vhost-net: fix handle_rx buffer size
  bonding: don't increase rx_dropped after processing LACPDUs
  connector/userns: replace netlink uses of cap_raised() with capable()
  sctp: check cached dst before using it
  pktgen: fix crash at module unload
  Revert "net: maintain namespace isolation between vlan and real device"
  ehea: fix losing of NEQ events when one event occurred early
  igb: fix rtnl race in PM resume path
  ipv4: Do not use dead fib_info entries.
  r8169: fix unsigned int wraparound with TSO
  sfc: Fix division by zero when using one RX channel and no SR-IOV
  openvswitch: Validation of IPv6 set port action uses IPv4 header
  net: compare_ether_addr[_64bits]() has no ordering
  cdc_ether: Ignore bogus union descriptor for RNDIS devices
  bnx2x: bug fix when loading after SAN boot
  e1000: Silence sparse warnings by correcting type
  igb, ixgbe: netdev_tx_reset_queue incorrectly called from tx init path
  openvswitch: Release rtnl_lock if ovs_vport_cmd_build_info() failed.
  ...

Pull device-mapper fixes from Alasdair G Kergon:
 "Fix a couple of serious memory leaks in device-mapper thin
  provisioning and tidy its MODULE_DESCRIPTION.

  Mitigate occasional reported hangs associated with multipath scsi_dh
  module loading."

* tag 'dm-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
  dm mpath: check if scsi_dh module already loaded before trying to load
  dm thin: correct module description
  dm thin: fix unprotected use of prepared_discards list
  dm thin: reinstate missing mempool_free in cell_release_singleton

Since cpufreq has no official maintainer at the moment, I'm willing
to maintain it along some other power management core code I've been
maintaining already.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If the requested scsi_dh module is already loaded then skip
request_module().

Multipath table loads can hang in an unnecessary __request_module.
Reported-by: NBen Marzinski <bmarzins@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Remove duplicate copy of string "device-mapper" (DM_NAME) from
MODULE_DESCRIPTION.
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Fix two places in commit 104655fd ("dm thin: support discards") that
didn't use pool->lock to protect against concurrent changes to the
prepared_discards list.

Without this fix, thin_endio() can race with process_discard(), leading
to concurrent list_add()s that result in the processes locking up with
an error like the following:

WARNING: at lib/list_debug.c:32 __list_add+0x8f/0xa0()
...
list_add corruption. next->prev should be prev (ffff880323b96140), but was ffff8801d2c48440. (next=ffff8801d2c485c0).
...
Pid: 17205, comm: kworker/u:1 Tainted: G        W  O 3.4.0-rc3.snitm+ #1
Call Trace:
 [<ffffffff8103ca1f>] warn_slowpath_common+0x7f/0xc0
 [<ffffffff8103cb16>] warn_slowpath_fmt+0x46/0x50
 [<ffffffffa04f6ce6>] ? bio_detain+0xc6/0x210 [dm_thin_pool]
 [<ffffffff8124ff3f>] __list_add+0x8f/0xa0
 [<ffffffffa04f70d2>] process_discard+0x2a2/0x2d0 [dm_thin_pool]
 [<ffffffffa04f6a78>] ? remap_and_issue+0x38/0x50 [dm_thin_pool]
 [<ffffffffa04f7c3b>] process_deferred_bios+0x7b/0x230 [dm_thin_pool]
 [<ffffffffa04f7df0>] ? process_deferred_bios+0x230/0x230 [dm_thin_pool]
 [<ffffffffa04f7e42>] do_worker+0x52/0x60 [dm_thin_pool]
 [<ffffffff81056fa9>] process_one_work+0x129/0x450
 [<ffffffff81059b9c>] worker_thread+0x17c/0x3c0
 [<ffffffff81059a20>] ? manage_workers+0x120/0x120
 [<ffffffff8105eabe>] kthread+0x9e/0xb0
 [<ffffffff814ceda4>] kernel_thread_helper+0x4/0x10
 [<ffffffff8105ea20>] ? kthread_freezable_should_stop+0x70/0x70
 [<ffffffff814ceda0>] ? gs_change+0x13/0x13
---[ end trace 7e0a523bc5e52692 ]---
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Fix a significant memory leak inadvertently introduced during
simplification of cell_release_singleton() in commit
6f94a4c4 ("dm thin: fix stacked bi_next
usage").

A cell's hlist_del() must be accompanied by a mempool_free().
Use __cell_release() to do this, like before.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Fixes the following compiler warnings:

drivers/gpio/gpio-samsung.c: In function ‘samsung_gpiolib_init’:
drivers/gpio/gpio-samsung.c:2980:1: warning: label ‘err_ioremap1’ defined but not used [-Wunused-label]
drivers/gpio/gpio-samsung.c:2978:1: warning: label ‘err_ioremap2’ defined but not used [-Wunused-label]
drivers/gpio/gpio-samsung.c:2976:1: warning: label ‘err_ioremap3’ defined but not used [-Wunused-label]
drivers/gpio/gpio-samsung.c:2974:1: warning: label ‘err_ioremap4’ defined but not used [-Wunused-label]
drivers/gpio/gpio-samsung.c:2722:55: warning: unused variable ‘gpio_base4’ [-Wunused-variable]

drivers/gpio/gpio-samsung.c:455:32: warning: ‘exynos_gpio_cfg’ defined but not used [-Wunused-variable]
drivers/gpio/gpio-samsung.c:2126:33: warning: ‘exynos4_gpios_1’ defined but not used [-Wunused-variable]
drivers/gpio/gpio-samsung.c:2228:33: warning: ‘exynos4_gpios_2’ defined but not used [-Wunused-variable]
drivers/gpio/gpio-samsung.c:2373:33: warning: ‘exynos4_gpios_3’ defined but not used [-Wunused-variable]
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Jean-Francois Dagenais reported:

 Configuring a gpio pin with the gpio-pch driver with
 "IRQF_TRIGGER_LOW | IRQF_ONESHOT" generates an interrupt storm for
 threaded ISR until the ISR thread actually gets to physically clear
 the interrupt on the triggering chip!! The immediate observable
 symptom is the high CPU usage for my ISR thread task and the
 interrupt count in /proc/interrupts incrementing radically.

The driver is wrong in several ways:

1) Using handle_simple_irq() does not provide proper flow control
   handling. In the case of oneshot threaded handlers for the
   demultiplexed interrupts this results in an interrupt storm because
   the simple handler does not deal with masking/unmasking.  Even
   without threaded oneshot handlers an interrupt storm for level type
   interrupts can easily be triggered when the interrupt is disabled
   and the interrupt line is activated from the device.

2) Acknowlegding the demultiplexed interrupt before calling the
   handler is wrong for level type interrupts.

3) The set_type function unconditionally enables the interrupt. It's
   supposed to set the type and nothing else. The unmasking is done by
   the core code.

Move the acknowledge code into a separate function and add it to the
demux irqchip callbacks.

Remove the unconditional enabling from the set_type() callback and set
the proper flow handlers depending on the selected type (level/edge).
Reported-and-tested-by: NJean-Francois Dagenais <jeff.dagenais@gmail.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Pull GPIO omap bug fix from Grant Likely.

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  gpio/omap: fix incorrect initialization of omap_gpio_mod_init

Pull another powerpc irq fix from Benjamin Herrenschmidt:
 "It looks like my previous fix for the lazy irq masking problem wasn't
  quite enough.  There was another problem related to performance
  monitor interrupts acting as NMIs leaving the flags in an incorrect
  state.  Here's a fix that finally seems to make perf solid again."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/irq: Fix another case of lazy IRQ state getting out of sync

Pull target fix from Nicholas Bellinger:
 "This patch removes some incorrect legacy code to free se_lun_acl
  memory in the NodeACL release path that could potentially trigger an
  OOPS during shutdown once dynamic -> explicit initiator NodeACL
  conversion has occurred.

  That said, we've been able to trigger an OOPS in v4.0 code for this
  special case when the associated MappedLUNs had not also been made
  explicit based on active TPG LUN layout during the conversion, so it
  really makes senses to go ahead and drop this extra cruft to avoid any
  possible issues here.

  This ends up only effecting iscsi-target module code (it's the only
  user) and is CC'ed to stable."

* '3.4-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: Drop incorrect se_lun_acl release for dynamic -> explict ACL conversion

So we have another case of paca->irq_happened getting out of
sync with the HW irq state. This can happen when a perfmon
interrupt occurs while soft disabled, as it will return to a
soft disabled but hard enabled context while leaving a stale
PACA_IRQ_HARD_DIS flag set.

This patch fixes it, and also adds a test for the condition
of those flags being out of sync in arch_local_irq_restore()
when CONFIG_TRACE_IRQFLAGS is enabled.

This helps catching those gremlins faster (and so far I
can't seem see any anymore, so that's good news).
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

If a link change interrupt comes in we just clear the interrupt
and continue along without notifying the upper networking layers
that the link has changed. Use the mii_check_link() function to
update the link status whenever a link change interrupt occurs.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ethernet vlan header is not on the packet and kept in the skb->vlan_tci
when it comes from lower dev. This patch inserts vlan header in user
buffer during skb copy on user read.
Signed-off-by: NBasil Gor <basil.gor@gmail.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Take vlan header length into account, when vlan id is stored as
vlan_tci. Otherwise tagged packets coming from macvtap will be
truncated.
Signed-off-by: NBasil Gor <basil.gor@gmail.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>